Restoring authorship annotation for <f0b0s@yandex-team.ru>. Commit 1 of 2.

1 files changed, 118 insertions, 118 deletions

diff --git a/contrib/libs/zlib/inflate.h b/contrib/libs/zlib/inflate.h
index a46cce6b6d..d075f6da19 100644
--- a/contrib/libs/zlib/inflate.h
+++ b/contrib/libs/zlib/inflate.h
@@ -1,125 +1,125 @@
-/* inflate.h -- internal inflate state definition
+/* inflate.h -- internal inflate state definition 
  * Copyright (C) 1995-2016 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-/* define NO_GZIP when compiling if you want to disable gzip header and
-   trailer decoding by inflate().  NO_GZIP would be used to avoid linking in
-   the crc code when it is not needed.  For shared libraries, gzip decoding
-   should be left enabled. */
-#ifndef NO_GZIP
-#  define GUNZIP
-#endif
-
-/* Possible inflate modes between inflate() calls */
-typedef enum {
+ * For conditions of distribution and use, see copyright notice in zlib.h 
+ */ 
+ 
+/* WARNING: this file should *not* be used by applications. It is 
+   part of the implementation of the compression library and is 
+   subject to change. Applications should only use zlib.h. 
+ */ 
+ 
+/* define NO_GZIP when compiling if you want to disable gzip header and 
+   trailer decoding by inflate().  NO_GZIP would be used to avoid linking in 
+   the crc code when it is not needed.  For shared libraries, gzip decoding 
+   should be left enabled. */ 
+#ifndef NO_GZIP 
+#  define GUNZIP 
+#endif 
+ 
+/* Possible inflate modes between inflate() calls */ 
+typedef enum { 
     HEAD = 16180,   /* i: waiting for magic header */
-    FLAGS,      /* i: waiting for method and flags (gzip) */
-    TIME,       /* i: waiting for modification time (gzip) */
-    OS,         /* i: waiting for extra flags and operating system (gzip) */
-    EXLEN,      /* i: waiting for extra length (gzip) */
-    EXTRA,      /* i: waiting for extra bytes (gzip) */
-    NAME,       /* i: waiting for end of file name (gzip) */
-    COMMENT,    /* i: waiting for end of comment (gzip) */
-    HCRC,       /* i: waiting for header crc (gzip) */
-    DICTID,     /* i: waiting for dictionary check value */
-    DICT,       /* waiting for inflateSetDictionary() call */
-        TYPE,       /* i: waiting for type bits, including last-flag bit */
-        TYPEDO,     /* i: same, but skip check to exit inflate on new block */
-        STORED,     /* i: waiting for stored size (length and complement) */
-        COPY_,      /* i/o: same as COPY below, but only first time in */
-        COPY,       /* i/o: waiting for input or output to copy stored block */
-        TABLE,      /* i: waiting for dynamic block table lengths */
-        LENLENS,    /* i: waiting for code length code lengths */
-        CODELENS,   /* i: waiting for length/lit and distance code lengths */
-            LEN_,       /* i: same as LEN below, but only first time in */
-            LEN,        /* i: waiting for length/lit/eob code */
-            LENEXT,     /* i: waiting for length extra bits */
-            DIST,       /* i: waiting for distance code */
-            DISTEXT,    /* i: waiting for distance extra bits */
-            MATCH,      /* o: waiting for output space to copy string */
-            LIT,        /* o: waiting for output space to write literal */
-    CHECK,      /* i: waiting for 32-bit check value */
-    LENGTH,     /* i: waiting for 32-bit length (gzip) */
-    DONE,       /* finished check, done -- remain here until reset */
-    BAD,        /* got a data error -- remain here until reset */
-    MEM,        /* got an inflate() memory error -- remain here until reset */
-    SYNC        /* looking for synchronization bytes to restart inflate() */
-} inflate_mode;
-
-/*
-    State transitions between above modes -
-
-    (most modes can go to BAD or MEM on error -- not shown for clarity)
-
-    Process header:
-        HEAD -> (gzip) or (zlib) or (raw)
-        (gzip) -> FLAGS -> TIME -> OS -> EXLEN -> EXTRA -> NAME -> COMMENT ->
-                  HCRC -> TYPE
-        (zlib) -> DICTID or TYPE
-        DICTID -> DICT -> TYPE
-        (raw) -> TYPEDO
-    Read deflate blocks:
-            TYPE -> TYPEDO -> STORED or TABLE or LEN_ or CHECK
-            STORED -> COPY_ -> COPY -> TYPE
-            TABLE -> LENLENS -> CODELENS -> LEN_
-            LEN_ -> LEN
-    Read deflate codes in fixed or dynamic block:
-                LEN -> LENEXT or LIT or TYPE
-                LENEXT -> DIST -> DISTEXT -> MATCH -> LEN
-                LIT -> LEN
-    Process trailer:
-        CHECK -> LENGTH -> DONE
- */
-
+    FLAGS,      /* i: waiting for method and flags (gzip) */ 
+    TIME,       /* i: waiting for modification time (gzip) */ 
+    OS,         /* i: waiting for extra flags and operating system (gzip) */ 
+    EXLEN,      /* i: waiting for extra length (gzip) */ 
+    EXTRA,      /* i: waiting for extra bytes (gzip) */ 
+    NAME,       /* i: waiting for end of file name (gzip) */ 
+    COMMENT,    /* i: waiting for end of comment (gzip) */ 
+    HCRC,       /* i: waiting for header crc (gzip) */ 
+    DICTID,     /* i: waiting for dictionary check value */ 
+    DICT,       /* waiting for inflateSetDictionary() call */ 
+        TYPE,       /* i: waiting for type bits, including last-flag bit */ 
+        TYPEDO,     /* i: same, but skip check to exit inflate on new block */ 
+        STORED,     /* i: waiting for stored size (length and complement) */ 
+        COPY_,      /* i/o: same as COPY below, but only first time in */ 
+        COPY,       /* i/o: waiting for input or output to copy stored block */ 
+        TABLE,      /* i: waiting for dynamic block table lengths */ 
+        LENLENS,    /* i: waiting for code length code lengths */ 
+        CODELENS,   /* i: waiting for length/lit and distance code lengths */ 
+            LEN_,       /* i: same as LEN below, but only first time in */ 
+            LEN,        /* i: waiting for length/lit/eob code */ 
+            LENEXT,     /* i: waiting for length extra bits */ 
+            DIST,       /* i: waiting for distance code */ 
+            DISTEXT,    /* i: waiting for distance extra bits */ 
+            MATCH,      /* o: waiting for output space to copy string */ 
+            LIT,        /* o: waiting for output space to write literal */ 
+    CHECK,      /* i: waiting for 32-bit check value */ 
+    LENGTH,     /* i: waiting for 32-bit length (gzip) */ 
+    DONE,       /* finished check, done -- remain here until reset */ 
+    BAD,        /* got a data error -- remain here until reset */ 
+    MEM,        /* got an inflate() memory error -- remain here until reset */ 
+    SYNC        /* looking for synchronization bytes to restart inflate() */ 
+} inflate_mode; 
+ 
+/* 
+    State transitions between above modes - 
+ 
+    (most modes can go to BAD or MEM on error -- not shown for clarity) 
+ 
+    Process header: 
+        HEAD -> (gzip) or (zlib) or (raw) 
+        (gzip) -> FLAGS -> TIME -> OS -> EXLEN -> EXTRA -> NAME -> COMMENT -> 
+                  HCRC -> TYPE 
+        (zlib) -> DICTID or TYPE 
+        DICTID -> DICT -> TYPE 
+        (raw) -> TYPEDO 
+    Read deflate blocks: 
+            TYPE -> TYPEDO -> STORED or TABLE or LEN_ or CHECK 
+            STORED -> COPY_ -> COPY -> TYPE 
+            TABLE -> LENLENS -> CODELENS -> LEN_ 
+            LEN_ -> LEN 
+    Read deflate codes in fixed or dynamic block: 
+                LEN -> LENEXT or LIT or TYPE 
+                LENEXT -> DIST -> DISTEXT -> MATCH -> LEN 
+                LIT -> LEN 
+    Process trailer: 
+        CHECK -> LENGTH -> DONE 
+ */ 
+ 
 /* State maintained between inflate() calls -- approximately 7K bytes, not
    including the allocated sliding window, which is up to 32K bytes. */
-struct inflate_state {
+struct inflate_state { 
     z_streamp strm;             /* pointer back to this zlib stream */
-    inflate_mode mode;          /* current inflate mode */
-    int last;                   /* true if processing last block */
+    inflate_mode mode;          /* current inflate mode */ 
+    int last;                   /* true if processing last block */ 
     int wrap;                   /* bit 0 true for zlib, bit 1 true for gzip,
                                    bit 2 true to validate check value */
-    int havedict;               /* true if dictionary provided */
-    int flags;                  /* gzip header method and flags (0 if zlib) */
-    unsigned dmax;              /* zlib header max distance (INFLATE_STRICT) */
-    unsigned long check;        /* protected copy of check value */
-    unsigned long total;        /* protected copy of output count */
-    gz_headerp head;            /* where to save gzip header information */
-        /* sliding window */
-    unsigned wbits;             /* log base 2 of requested window size */
-    unsigned wsize;             /* window size or zero if not using window */
-    unsigned whave;             /* valid bytes in the window */
-    unsigned wnext;             /* window write index */
-    unsigned char FAR *window;  /* allocated sliding window, if needed */
-        /* bit accumulator */
-    unsigned long hold;         /* input bit accumulator */
-    unsigned bits;              /* number of bits in "in" */
-        /* for string and stored block copying */
-    unsigned length;            /* literal or length of data to copy */
-    unsigned offset;            /* distance back to copy string from */
-        /* for table and code decoding */
-    unsigned extra;             /* extra bits needed */
-        /* fixed and dynamic code tables */
-    code const FAR *lencode;    /* starting table for length/literal codes */
-    code const FAR *distcode;   /* starting table for distance codes */
-    unsigned lenbits;           /* index bits for lencode */
-    unsigned distbits;          /* index bits for distcode */
-        /* dynamic table building */
-    unsigned ncode;             /* number of code length code lengths */
-    unsigned nlen;              /* number of length code lengths */
-    unsigned ndist;             /* number of distance code lengths */
-    unsigned have;              /* number of code lengths in lens[] */
-    code FAR *next;             /* next available space in codes[] */
-    unsigned short lens[320];   /* temporary storage for code lengths */
-    unsigned short work[288];   /* work area for code table building */
-    code codes[ENOUGH];         /* space for code tables */
-    int sane;                   /* if false, allow invalid distance too far */
-    int back;                   /* bits back of last unprocessed length/lit */
-    unsigned was;               /* initial length of match */
-};
+    int havedict;               /* true if dictionary provided */ 
+    int flags;                  /* gzip header method and flags (0 if zlib) */ 
+    unsigned dmax;              /* zlib header max distance (INFLATE_STRICT) */ 
+    unsigned long check;        /* protected copy of check value */ 
+    unsigned long total;        /* protected copy of output count */ 
+    gz_headerp head;            /* where to save gzip header information */ 
+        /* sliding window */ 
+    unsigned wbits;             /* log base 2 of requested window size */ 
+    unsigned wsize;             /* window size or zero if not using window */ 
+    unsigned whave;             /* valid bytes in the window */ 
+    unsigned wnext;             /* window write index */ 
+    unsigned char FAR *window;  /* allocated sliding window, if needed */ 
+        /* bit accumulator */ 
+    unsigned long hold;         /* input bit accumulator */ 
+    unsigned bits;              /* number of bits in "in" */ 
+        /* for string and stored block copying */ 
+    unsigned length;            /* literal or length of data to copy */ 
+    unsigned offset;            /* distance back to copy string from */ 
+        /* for table and code decoding */ 
+    unsigned extra;             /* extra bits needed */ 
+        /* fixed and dynamic code tables */ 
+    code const FAR *lencode;    /* starting table for length/literal codes */ 
+    code const FAR *distcode;   /* starting table for distance codes */ 
+    unsigned lenbits;           /* index bits for lencode */ 
+    unsigned distbits;          /* index bits for distcode */ 
+        /* dynamic table building */ 
+    unsigned ncode;             /* number of code length code lengths */ 
+    unsigned nlen;              /* number of length code lengths */ 
+    unsigned ndist;             /* number of distance code lengths */ 
+    unsigned have;              /* number of code lengths in lens[] */ 
+    code FAR *next;             /* next available space in codes[] */ 
+    unsigned short lens[320];   /* temporary storage for code lengths */ 
+    unsigned short work[288];   /* work area for code table building */ 
+    code codes[ENOUGH];         /* space for code tables */ 
+    int sane;                   /* if false, allow invalid distance too far */ 
+    int back;                   /* bits back of last unprocessed length/lit */ 
+    unsigned was;               /* initial length of match */ 
+};