Intermediate changes

commit_hash:d5b1af16dbe9030537a04c27eb410c88c2f496cd

1 files changed, 456 insertions, 0 deletions

diff --git a/contrib/libs/pcre2/src/pcre2_config-linux.h b/contrib/libs/pcre2/src/pcre2_config-linux.h
new file mode 100644
index 00000000000..18ca09ac6c7
--- /dev/null
+++ b/contrib/libs/pcre2/src/pcre2_config-linux.h
@@ -0,0 +1,456 @@
+/* src/config.h.  Generated from config.h.in by configure.  */
+/* src/config.h.in.  Generated from configure.ac by autoheader.  */
+
+
+/* PCRE2 is written in Standard C, but there are a few non-standard things it
+can cope with, allowing it to run on SunOS4 and other "close to standard"
+systems.
+
+In environments that support the GNU autotools, config.h.in is converted into
+config.h by the "configure" script. In environments that use CMake,
+config-cmake.in is converted into config.h. If you are going to build PCRE2 "by
+hand" without using "configure" or CMake, you should copy the distributed
+config.h.generic to config.h, and edit the macro definitions to be the way you
+need them. You must then add -DHAVE_CONFIG_H to all of your compile commands,
+so that config.h is included at the start of every source.
+
+Alternatively, you can avoid editing by using -D on the compiler command line
+to set the macro values. In this case, you do not have to set -DHAVE_CONFIG_H,
+but if you do, default values will be taken from config.h for non-boolean
+macros that are not defined on the command line.
+
+Boolean macros such as HAVE_STDLIB_H and SUPPORT_PCRE2_8 should either be
+defined (conventionally to 1) for TRUE, and not defined at all for FALSE. All
+such macros are listed as a commented #undef in config.h.generic. Macros such
+as MATCH_LIMIT, whose actual value is relevant, have defaults defined, but are
+surrounded by #ifndef/#endif lines so that the value can be overridden by -D.
+
+PCRE2 uses memmove() if HAVE_MEMMOVE is defined; otherwise it uses bcopy() if
+HAVE_BCOPY is defined. If your system has neither bcopy() nor memmove(), make
+sure both macros are undefined; an emulation function will then be used. */
+
+/* By default, the \R escape sequence matches any Unicode line ending
+   character or sequence of characters. If BSR_ANYCRLF is defined (to any
+   value), this is changed so that backslash-R matches only CR, LF, or CRLF.
+   The build-time default can be overridden by the user of PCRE2 at runtime.
+   */
+/* #undef BSR_ANYCRLF */
+
+/* Define to any value to disable the use of the z and t modifiers in
+   formatting settings such as %zu or %td (this is rarely needed). */
+/* #undef DISABLE_PERCENT_ZT */
+
+/* If you are compiling for a system that uses EBCDIC instead of ASCII
+   character codes, define this macro to any value. When EBCDIC is set, PCRE2
+   assumes that all input strings are in EBCDIC. If you do not define this
+   macro, PCRE2 will assume input strings are ASCII or UTF-8/16/32 Unicode. It
+   is not possible to build a version of PCRE2 that supports both EBCDIC and
+   UTF-8/16/32. */
+/* #undef EBCDIC */
+
+/* In an EBCDIC environment, define this macro to any value to arrange for the
+   NL character to be 0x25 instead of the default 0x15. NL plays the role that
+   LF does in an ASCII/Unicode environment. */
+/* #undef EBCDIC_NL25 */
+
+/* Define this if your compiler supports __attribute__((uninitialized)) */
+#define HAVE_ATTRIBUTE_UNINITIALIZED 1
+
+/* Define to 1 if you have the 'bcopy' function. */
+#define HAVE_BCOPY 1
+
+/* Define to 1 if you have the <bzlib.h> header file. */
+/* #undef HAVE_BZLIB_H */
+
+/* Define to 1 if you have the <dirent.h> header file. */
+#define HAVE_DIRENT_H 1
+
+/* Define to 1 if you have the <dlfcn.h> header file. */
+#define HAVE_DLFCN_H 1
+
+/* Define to 1 if you have the <editline/readline.h> header file. */
+/* #undef HAVE_EDITLINE_READLINE_H */
+
+/* Define to 1 if you have the <edit/readline/readline.h> header file. */
+/* #undef HAVE_EDIT_READLINE_READLINE_H */
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#define HAVE_INTTYPES_H 1
+
+/* Define to 1 if you have the <limits.h> header file. */
+#define HAVE_LIMITS_H 1
+
+/* Define to 1 if you have the 'memfd_create' function. */
+/* #undef HAVE_MEMFD_CREATE */
+
+/* Define to 1 if you have the 'memmove' function. */
+#define HAVE_MEMMOVE 1
+
+/* Define to 1 if you have the <minix/config.h> header file. */
+/* #undef HAVE_MINIX_CONFIG_H */
+
+/* Define to 1 if you have the 'mkostemp' function. */
+#define HAVE_MKOSTEMP 1
+
+/* Define if you have POSIX threads libraries and header files. */
+#define HAVE_PTHREAD 1
+
+/* Have PTHREAD_PRIO_INHERIT. */
+#define HAVE_PTHREAD_PRIO_INHERIT 1
+
+/* Define to 1 if you have the <readline.h> header file. */
+/* #undef HAVE_READLINE_H */
+
+/* Define to 1 if you have the <readline/history.h> header file. */
+/* #undef HAVE_READLINE_HISTORY_H */
+
+/* Define to 1 if you have the <readline/readline.h> header file. */
+/* #undef HAVE_READLINE_READLINE_H */
+
+/* Define to 1 if you have the `realpath' function. */
+#define HAVE_REALPATH 1
+
+/* Define to 1 if you have the 'secure_getenv' function. */
+#define HAVE_SECURE_GETENV 1
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#define HAVE_STDINT_H 1
+
+/* Define to 1 if you have the <stdio.h> header file. */
+#define HAVE_STDIO_H 1
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#define HAVE_STDLIB_H 1
+
+/* Define to 1 if you have the 'strerror' function. */
+#define HAVE_STRERROR 1
+
+/* Define to 1 if you have the <strings.h> header file. */
+#define HAVE_STRINGS_H 1
+
+/* Define to 1 if you have the <string.h> header file. */
+#define HAVE_STRING_H 1
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#define HAVE_SYS_STAT_H 1
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#define HAVE_SYS_TYPES_H 1
+
+/* Define to 1 if you have the <sys/wait.h> header file. */
+#define HAVE_SYS_WAIT_H 1
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#define HAVE_UNISTD_H 1
+
+/* Define to 1 if the compiler supports simple visibility declarations. */
+#define HAVE_VISIBILITY 1
+
+/* Define to 1 if you have the <wchar.h> header file. */
+#define HAVE_WCHAR_H 1
+
+/* Define to 1 if you have the <windows.h> header file. */
+/* #undef HAVE_WINDOWS_H */
+
+/* Define to 1 if you have the <zlib.h> header file. */
+/* #undef HAVE_ZLIB_H */
+
+/* This limits the amount of memory that may be used while matching a pattern.
+   It applies to both pcre2_match() and pcre2_dfa_match(). It does not apply
+   to JIT matching. The value is in kibibytes (units of 1024 bytes). */
+#define HEAP_LIMIT 20000000
+
+/* The value of LINK_SIZE determines the number of bytes used to store links
+   as offsets within the compiled regex. The default is 2, which allows for
+   compiled patterns up to 65535 code units long. This covers the vast
+   majority of cases. However, PCRE2 can also be compiled to use 3 or 4 bytes
+   instead. This allows for longer patterns in extreme cases. */
+#define LINK_SIZE 2
+
+/* Define to the sub-directory where libtool stores uninstalled libraries. */
+#define LT_OBJDIR ".libs/"
+
+/* The value of MATCH_LIMIT determines the default number of times the
+   pcre2_match() function can record a backtrack position during a single
+   matching attempt. The value is also used to limit a loop counter in
+   pcre2_dfa_match(). There is a runtime interface for setting a different
+   limit. The limit exists in order to catch runaway regular expressions that
+   take for ever to determine that they do not match. The default is set very
+   large so that it does not accidentally catch legitimate cases. */
+#define MATCH_LIMIT 10000000
+
+/* The above limit applies to all backtracks, whether or not they are nested.
+   In some environments it is desirable to limit the nesting of backtracking
+   (that is, the depth of tree that is searched) more strictly, in order to
+   restrict the maximum amount of heap memory that is used. The value of
+   MATCH_LIMIT_DEPTH provides this facility. To have any useful effect, it
+   must be less than the value of MATCH_LIMIT. The default is to use the same
+   value as MATCH_LIMIT. There is a runtime method for setting a different
+   limit. In the case of pcre2_dfa_match(), this limit controls the depth of
+   the internal nested function calls that are used for pattern recursions,
+   lookarounds, and atomic groups. */
+#define MATCH_LIMIT_DEPTH MATCH_LIMIT
+
+/* This limit is parameterized just in case anybody ever wants to change it.
+   Care must be taken if it is increased, because it guards against integer
+   overflow caused by enormously large patterns. */
+#define MAX_NAME_COUNT 10000
+
+/* This limit is parameterized just in case anybody ever wants to change it.
+   Care must be taken if it is increased, because it guards against integer
+   overflow caused by enormously large patterns. */
+#define MAX_NAME_SIZE 32
+
+/* Defining NEVER_BACKSLASH_C locks out the use of \C in all patterns. */
+/* #undef NEVER_BACKSLASH_C */
+
+/* The value of NEWLINE_DEFAULT determines the default newline character
+   sequence. PCRE2 client programs can override this by selecting other values
+   at run time. The valid values are 1 (CR), 2 (LF), 3 (CRLF), 4 (ANY), 5
+   (ANYCRLF), and 6 (NUL). */
+#define NEWLINE_DEFAULT 2
+
+/* Name of package */
+#define PACKAGE "pcre2"
+
+/* Define to the address where bug reports for this package should be sent. */
+#define PACKAGE_BUGREPORT ""
+
+/* Define to the full name of this package. */
+#define PACKAGE_NAME "PCRE2"
+
+/* Define to the full name and version of this package. */
+#define PACKAGE_STRING "PCRE2 10.42"
+
+/* Define to the one symbol short name of this package. */
+#define PACKAGE_TARNAME "pcre2"
+
+/* Define to the home page for this package. */
+#define PACKAGE_URL ""
+
+/* Define to the version of this package. */
+#define PACKAGE_VERSION "10.42"
+
+/* The value of PARENS_NEST_LIMIT specifies the maximum depth of nested
+   parentheses (of any kind) in a pattern. This limits the amount of system
+   stack that is used while compiling a pattern. */
+#define PARENS_NEST_LIMIT 250
+
+/* The value of PCRE2GREP_BUFSIZE is the starting size of the buffer used by
+   pcre2grep to hold parts of the file it is searching. The buffer will be
+   expanded up to PCRE2GREP_MAX_BUFSIZE if necessary, for files containing
+   very long lines. The actual amount of memory used by pcre2grep is three
+   times this number, because it allows for the buffering of "before" and
+   "after" lines. */
+#define PCRE2GREP_BUFSIZE 20480
+
+/* The value of PCRE2GREP_MAX_BUFSIZE specifies the maximum size of the buffer
+   used by pcre2grep to hold parts of the file it is searching. The actual
+   amount of memory used by pcre2grep is three times this number, because it
+   allows for the buffering of "before" and "after" lines. */
+#define PCRE2GREP_MAX_BUFSIZE 1048576
+
+/* to make a symbol visible */
+#define PCRE2POSIX_EXP_DECL extern __attribute__ ((visibility ("default")))
+
+/* to make a symbol visible */
+#define PCRE2POSIX_EXP_DEFN extern __attribute__ ((visibility ("default")))
+
+/* Define to any value to include debugging code. */
+/* #undef PCRE2_DEBUG */
+
+/* to make a symbol visible */
+#define PCRE2_EXP_DECL extern __attribute__ ((visibility ("default")))
+
+
+/* If you are compiling for a system other than a Unix-like system or
+   Win32, and it needs some magic to be inserted before the definition
+   of a function that is exported by the library, define this macro to
+   contain the relevant magic. If you do not define this macro, a suitable
+    __declspec value is used for Windows systems; in other environments
+   "extern" is used for a C compiler and "extern C" for a C++ compiler.
+   This macro apears at the start of every exported function that is part
+   of the external API. It does not appear on functions that are "external"
+   in the C sense, but which are internal to the library. */
+#define PCRE2_EXP_DEFN __attribute__ ((visibility ("default")))
+
+/* Define to any value if linking statically (TODO: make nice with Libtool) */
+/* #undef PCRE2_STATIC */
+
+/* Define to necessary symbol if this constant uses a non-standard name on
+   your system. */
+/* #undef PTHREAD_CREATE_JOINABLE */
+
+/* Define to any non-zero number to enable support for SELinux compatible
+   executable memory allocator in JIT. Note that this will have no effect
+   unless SUPPORT_JIT is also defined. */
+#define SLJIT_PROT_EXECUTABLE_ALLOCATOR 1
+
+/* Define to 1 if all of the C89 standard headers exist (not just the ones
+   required in a freestanding environment). This macro is provided for
+   backward compatibility; new code need not use it. */
+#define STDC_HEADERS 1
+
+/* Define to any value to enable support for Just-In-Time compiling. */
+#define SUPPORT_JIT /**/
+
+/* Define to any value to allow pcre2grep to be linked with libbz2, so that it
+   is able to handle .bz2 files. */
+/* #undef SUPPORT_LIBBZ2 */
+
+/* Define to any value to allow pcre2test to be linked with libedit. */
+/* #undef SUPPORT_LIBEDIT */
+
+/* Define to any value to allow pcre2test to be linked with libreadline. */
+/* #undef SUPPORT_LIBREADLINE */
+
+/* Define to any value to allow pcre2grep to be linked with libz, so that it
+   is able to handle .gz files. */
+/* #undef SUPPORT_LIBZ */
+
+/* Define to any value to enable callout script support in pcre2grep. */
+#define SUPPORT_PCRE2GREP_CALLOUT /**/
+
+/* Define to any value to enable fork support in pcre2grep callout scripts.
+   This will have no effect unless SUPPORT_PCRE2GREP_CALLOUT is also defined.
+   */
+#define SUPPORT_PCRE2GREP_CALLOUT_FORK /**/
+
+/* Define to any value to enable JIT support in pcre2grep. Note that this will
+   have no effect unless SUPPORT_JIT is also defined. */
+#define SUPPORT_PCRE2GREP_JIT /**/
+
+/* Define to any value to enable the 16 bit PCRE2 library. */
+#define SUPPORT_PCRE2_16 /**/
+
+/* Define to any value to enable the 32 bit PCRE2 library. */
+#define SUPPORT_PCRE2_32 /**/
+
+/* Define to any value to enable the 8 bit PCRE2 library. */
+#define SUPPORT_PCRE2_8 /**/
+
+/* Define to any value to enable support for Unicode and UTF encoding. This
+   will work even in an EBCDIC environment, but it is incompatible with the
+   EBCDIC macro. That is, PCRE2 can support *either* EBCDIC code *or*
+   ASCII/Unicode, but not both at once. */
+#define SUPPORT_UNICODE /**/
+
+/* Define to any value for valgrind support to find invalid memory reads. */
+/* #undef SUPPORT_VALGRIND */
+
+/* Enable extensions on AIX, Interix, z/OS.  */
+#ifndef _ALL_SOURCE
+# define _ALL_SOURCE 1
+#endif
+/* Enable general extensions on macOS.  */
+#ifndef _DARWIN_C_SOURCE
+# define _DARWIN_C_SOURCE 1
+#endif
+/* Enable general extensions on Solaris.  */
+#ifndef __EXTENSIONS__
+# define __EXTENSIONS__ 1
+#endif
+/* Enable GNU extensions on systems that have them.  */
+#ifndef _GNU_SOURCE
+# define _GNU_SOURCE 1
+#endif
+/* Enable X/Open compliant socket functions that do not require linking
+   with -lxnet on HP-UX 11.11.  */
+#ifndef _HPUX_ALT_XOPEN_SOCKET_API
+# define _HPUX_ALT_XOPEN_SOCKET_API 1
+#endif
+/* Identify the host operating system as Minix.
+   This macro does not affect the system headers' behavior.
+   A future release of Autoconf may stop defining this macro.  */
+#ifndef _MINIX
+/* # undef _MINIX */
+#endif
+/* Enable general extensions on NetBSD.
+   Enable NetBSD compatibility extensions on Minix.  */
+#ifndef _NETBSD_SOURCE
+# define _NETBSD_SOURCE 1
+#endif
+/* Enable OpenBSD compatibility extensions on NetBSD.
+   Oddly enough, this does nothing on OpenBSD.  */
+#ifndef _OPENBSD_SOURCE
+# define _OPENBSD_SOURCE 1
+#endif
+/* Define to 1 if needed for POSIX-compatible behavior.  */
+#ifndef _POSIX_SOURCE
+/* # undef _POSIX_SOURCE */
+#endif
+/* Define to 2 if needed for POSIX-compatible behavior.  */
+#ifndef _POSIX_1_SOURCE
+/* # undef _POSIX_1_SOURCE */
+#endif
+/* Enable POSIX-compatible threading on Solaris.  */
+#ifndef _POSIX_PTHREAD_SEMANTICS
+# define _POSIX_PTHREAD_SEMANTICS 1
+#endif
+/* Enable extensions specified by ISO/IEC TS 18661-5:2014.  */
+#ifndef __STDC_WANT_IEC_60559_ATTRIBS_EXT__
+# define __STDC_WANT_IEC_60559_ATTRIBS_EXT__ 1
+#endif
+/* Enable extensions specified by ISO/IEC TS 18661-1:2014.  */
+#ifndef __STDC_WANT_IEC_60559_BFP_EXT__
+# define __STDC_WANT_IEC_60559_BFP_EXT__ 1
+#endif
+/* Enable extensions specified by ISO/IEC TS 18661-2:2015.  */
+#ifndef __STDC_WANT_IEC_60559_DFP_EXT__
+# define __STDC_WANT_IEC_60559_DFP_EXT__ 1
+#endif
+/* Enable extensions specified by C23 Annex F.  */
+#ifndef __STDC_WANT_IEC_60559_EXT__
+# define __STDC_WANT_IEC_60559_EXT__ 1
+#endif
+/* Enable extensions specified by ISO/IEC TS 18661-4:2015.  */
+#ifndef __STDC_WANT_IEC_60559_FUNCS_EXT__
+# define __STDC_WANT_IEC_60559_FUNCS_EXT__ 1
+#endif
+/* Enable extensions specified by C23 Annex H and ISO/IEC TS 18661-3:2015.  */
+#ifndef __STDC_WANT_IEC_60559_TYPES_EXT__
+# define __STDC_WANT_IEC_60559_TYPES_EXT__ 1
+#endif
+/* Enable extensions specified by ISO/IEC TR 24731-2:2010.  */
+#ifndef __STDC_WANT_LIB_EXT2__
+# define __STDC_WANT_LIB_EXT2__ 1
+#endif
+/* Enable extensions specified by ISO/IEC 24747:2009.  */
+#ifndef __STDC_WANT_MATH_SPEC_FUNCS__
+# define __STDC_WANT_MATH_SPEC_FUNCS__ 1
+#endif
+/* Enable extensions on HP NonStop.  */
+#ifndef _TANDEM_SOURCE
+# define _TANDEM_SOURCE 1
+#endif
+/* Enable X/Open extensions.  Define to 500 only if necessary
+   to make mbstate_t available.  */
+#ifndef _XOPEN_SOURCE
+/* # undef _XOPEN_SOURCE */
+#endif
+
+
+/* Version number of package */
+#define VERSION "10.42"
+
+/* Number of bits in a file offset, on hosts where this is settable. */
+/* #undef _FILE_OFFSET_BITS */
+
+/* Define to 1 on platforms where this makes off_t a 64-bit type. */
+/* #undef _LARGE_FILES */
+
+/* Number of bits in time_t, on hosts where this is settable. */
+/* #undef _TIME_BITS */
+
+/* Define to 1 on platforms where this makes time_t a 64-bit type. */
+/* #undef __MINGW_USE_VC2005_COMPAT */
+
+/* Define to empty if 'const' does not conform to ANSI C. */
+/* #undef const */
+
+/* Define to the type of a signed integer type of width exactly 64 bits if
+   such a type exists and the standard includes do not define it. */
+/* #undef int64_t */
+
+/* Define as 'unsigned int' if <stddef.h> doesn't define. */
+/* #undef size_t */