add sanitizers dependencies

1 files changed, 191 insertions, 0 deletions

diff --git a/contrib/libs/linux-headers/linux/vhost.h b/contrib/libs/linux-headers/linux/vhost.h
new file mode 100644
index 0000000000..92e1b700b5
--- /dev/null
+++ b/contrib/libs/linux-headers/linux/vhost.h
@@ -0,0 +1,191 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _LINUX_VHOST_H
+#define _LINUX_VHOST_H
+/* Userspace interface for in-kernel virtio accelerators. */
+
+/* vhost is used to reduce the number of system calls involved in virtio.
+ *
+ * Existing virtio net code is used in the guest without modification.
+ *
+ * This header includes interface used by userspace hypervisor for
+ * device configuration.
+ */
+
+#include <linux/vhost_types.h>
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+#define VHOST_FILE_UNBIND -1
+
+/* ioctls */
+
+#define VHOST_VIRTIO 0xAF
+
+/* Features bitmask for forward compatibility.  Transport bits are used for
+ * vhost specific features. */
+#define VHOST_GET_FEATURES	_IOR(VHOST_VIRTIO, 0x00, __u64)
+#define VHOST_SET_FEATURES	_IOW(VHOST_VIRTIO, 0x00, __u64)
+
+/* Set current process as the (exclusive) owner of this file descriptor.  This
+ * must be called before any other vhost command.  Further calls to
+ * VHOST_OWNER_SET fail until VHOST_OWNER_RESET is called. */
+#define VHOST_SET_OWNER _IO(VHOST_VIRTIO, 0x01)
+/* Give up ownership, and reset the device to default values.
+ * Allows subsequent call to VHOST_OWNER_SET to succeed. */
+#define VHOST_RESET_OWNER _IO(VHOST_VIRTIO, 0x02)
+
+/* Set up/modify memory layout */
+#define VHOST_SET_MEM_TABLE	_IOW(VHOST_VIRTIO, 0x03, struct vhost_memory)
+
+/* Write logging setup. */
+/* Memory writes can optionally be logged by setting bit at an offset
+ * (calculated from the physical address) from specified log base.
+ * The bit is set using an atomic 32 bit operation. */
+/* Set base address for logging. */
+#define VHOST_SET_LOG_BASE _IOW(VHOST_VIRTIO, 0x04, __u64)
+/* Specify an eventfd file descriptor to signal on log write. */
+#define VHOST_SET_LOG_FD _IOW(VHOST_VIRTIO, 0x07, int)
+
+/* Ring setup. */
+/* Set number of descriptors in ring. This parameter can not
+ * be modified while ring is running (bound to a device). */
+#define VHOST_SET_VRING_NUM _IOW(VHOST_VIRTIO, 0x10, struct vhost_vring_state)
+/* Set addresses for the ring. */
+#define VHOST_SET_VRING_ADDR _IOW(VHOST_VIRTIO, 0x11, struct vhost_vring_addr)
+/* Base value where queue looks for available descriptors */
+#define VHOST_SET_VRING_BASE _IOW(VHOST_VIRTIO, 0x12, struct vhost_vring_state)
+/* Get accessor: reads index, writes value in num */
+#define VHOST_GET_VRING_BASE _IOWR(VHOST_VIRTIO, 0x12, struct vhost_vring_state)
+
+/* Set the vring byte order in num. Valid values are VHOST_VRING_LITTLE_ENDIAN
+ * or VHOST_VRING_BIG_ENDIAN (other values return -EINVAL).
+ * The byte order cannot be changed while the device is active: trying to do so
+ * returns -EBUSY.
+ * This is a legacy only API that is simply ignored when VIRTIO_F_VERSION_1 is
+ * set.
+ * Not all kernel configurations support this ioctl, but all configurations that
+ * support SET also support GET.
+ */
+#define VHOST_VRING_LITTLE_ENDIAN 0
+#define VHOST_VRING_BIG_ENDIAN 1
+#define VHOST_SET_VRING_ENDIAN _IOW(VHOST_VIRTIO, 0x13, struct vhost_vring_state)
+#define VHOST_GET_VRING_ENDIAN _IOW(VHOST_VIRTIO, 0x14, struct vhost_vring_state)
+
+/* The following ioctls use eventfd file descriptors to signal and poll
+ * for events. */
+
+/* Set eventfd to poll for added buffers */
+#define VHOST_SET_VRING_KICK _IOW(VHOST_VIRTIO, 0x20, struct vhost_vring_file)
+/* Set eventfd to signal when buffers have beed used */
+#define VHOST_SET_VRING_CALL _IOW(VHOST_VIRTIO, 0x21, struct vhost_vring_file)
+/* Set eventfd to signal an error */
+#define VHOST_SET_VRING_ERR _IOW(VHOST_VIRTIO, 0x22, struct vhost_vring_file)
+/* Set busy loop timeout (in us) */
+#define VHOST_SET_VRING_BUSYLOOP_TIMEOUT _IOW(VHOST_VIRTIO, 0x23,	\
+					 struct vhost_vring_state)
+/* Get busy loop timeout (in us) */
+#define VHOST_GET_VRING_BUSYLOOP_TIMEOUT _IOW(VHOST_VIRTIO, 0x24,	\
+					 struct vhost_vring_state)
+
+/* Set or get vhost backend capability */
+
+#define VHOST_SET_BACKEND_FEATURES _IOW(VHOST_VIRTIO, 0x25, __u64)
+#define VHOST_GET_BACKEND_FEATURES _IOR(VHOST_VIRTIO, 0x26, __u64)
+
+/* VHOST_NET specific defines */
+
+/* Attach virtio net ring to a raw socket, or tap device.
+ * The socket must be already bound to an ethernet device, this device will be
+ * used for transmit.  Pass fd -1 to unbind from the socket and the transmit
+ * device.  This can be used to stop the ring (e.g. for migration). */
+#define VHOST_NET_SET_BACKEND _IOW(VHOST_VIRTIO, 0x30, struct vhost_vring_file)
+
+/* VHOST_SCSI specific defines */
+
+#define VHOST_SCSI_SET_ENDPOINT _IOW(VHOST_VIRTIO, 0x40, struct vhost_scsi_target)
+#define VHOST_SCSI_CLEAR_ENDPOINT _IOW(VHOST_VIRTIO, 0x41, struct vhost_scsi_target)
+/* Changing this breaks userspace. */
+#define VHOST_SCSI_GET_ABI_VERSION _IOW(VHOST_VIRTIO, 0x42, int)
+/* Set and get the events missed flag */
+#define VHOST_SCSI_SET_EVENTS_MISSED _IOW(VHOST_VIRTIO, 0x43, __u32)
+#define VHOST_SCSI_GET_EVENTS_MISSED _IOW(VHOST_VIRTIO, 0x44, __u32)
+
+/* VHOST_VSOCK specific defines */
+
+#define VHOST_VSOCK_SET_GUEST_CID	_IOW(VHOST_VIRTIO, 0x60, __u64)
+#define VHOST_VSOCK_SET_RUNNING		_IOW(VHOST_VIRTIO, 0x61, int)
+
+/* VHOST_VDPA specific defines */
+
+/* Get the device id. The device ids follow the same definition of
+ * the device id defined in virtio-spec.
+ */
+#define VHOST_VDPA_GET_DEVICE_ID	_IOR(VHOST_VIRTIO, 0x70, __u32)
+/* Get and set the status. The status bits follow the same definition
+ * of the device status defined in virtio-spec.
+ */
+#define VHOST_VDPA_GET_STATUS		_IOR(VHOST_VIRTIO, 0x71, __u8)
+#define VHOST_VDPA_SET_STATUS		_IOW(VHOST_VIRTIO, 0x72, __u8)
+/* Get and set the device config. The device config follows the same
+ * definition of the device config defined in virtio-spec.
+ */
+#define VHOST_VDPA_GET_CONFIG		_IOR(VHOST_VIRTIO, 0x73, \
+					     struct vhost_vdpa_config)
+#define VHOST_VDPA_SET_CONFIG		_IOW(VHOST_VIRTIO, 0x74, \
+					     struct vhost_vdpa_config)
+/* Enable/disable the ring. */
+#define VHOST_VDPA_SET_VRING_ENABLE	_IOW(VHOST_VIRTIO, 0x75, \
+					     struct vhost_vring_state)
+/* Get the max ring size. */
+#define VHOST_VDPA_GET_VRING_NUM	_IOR(VHOST_VIRTIO, 0x76, __u16)
+
+/* Set event fd for config interrupt*/
+#define VHOST_VDPA_SET_CONFIG_CALL	_IOW(VHOST_VIRTIO, 0x77, int)
+
+/* Get the valid iova range */
+#define VHOST_VDPA_GET_IOVA_RANGE	_IOR(VHOST_VIRTIO, 0x78, \
+					     struct vhost_vdpa_iova_range)
+/* Get the config size */
+#define VHOST_VDPA_GET_CONFIG_SIZE	_IOR(VHOST_VIRTIO, 0x79, __u32)
+
+/* Get the count of all virtqueues */
+#define VHOST_VDPA_GET_VQS_COUNT	_IOR(VHOST_VIRTIO, 0x80, __u32)
+
+/* Get the number of virtqueue groups. */
+#define VHOST_VDPA_GET_GROUP_NUM	_IOR(VHOST_VIRTIO, 0x81, __u32)
+
+/* Get the number of address spaces. */
+#define VHOST_VDPA_GET_AS_NUM		_IOR(VHOST_VIRTIO, 0x7A, unsigned int)
+
+/* Get the group for a virtqueue: read index, write group in num,
+ * The virtqueue index is stored in the index field of
+ * vhost_vring_state. The group for this specific virtqueue is
+ * returned via num field of vhost_vring_state.
+ */
+#define VHOST_VDPA_GET_VRING_GROUP	_IOWR(VHOST_VIRTIO, 0x7B,	\
+					      struct vhost_vring_state)
+/* Set the ASID for a virtqueue group. The group index is stored in
+ * the index field of vhost_vring_state, the ASID associated with this
+ * group is stored at num field of vhost_vring_state.
+ */
+#define VHOST_VDPA_SET_GROUP_ASID	_IOW(VHOST_VIRTIO, 0x7C, \
+					     struct vhost_vring_state)
+
+/* Suspend a device so it does not process virtqueue requests anymore
+ *
+ * After the return of ioctl the device must preserve all the necessary state
+ * (the virtqueue vring base plus the possible device specific states) that is
+ * required for restoring in the future. The device must not change its
+ * configuration after that point.
+ */
+#define VHOST_VDPA_SUSPEND		_IO(VHOST_VIRTIO, 0x7D)
+
+/* Resume a device so it can resume processing virtqueue requests
+ *
+ * After the return of this ioctl the device will have restored all the
+ * necessary states and it is fully operational to continue processing the
+ * virtqueue descriptors.
+ */
+#define VHOST_VDPA_RESUME		_IO(VHOST_VIRTIO, 0x7E)
+
+#endif