add sanitizers dependencies

2 files changed, 293 insertions, 0 deletions

diff --git a/contrib/libs/linux-headers/linux/surface_aggregator/cdev.h b/contrib/libs/linux-headers/linux/surface_aggregator/cdev.h
new file mode 100644
index 0000000000..cf0c63d3c0
--- /dev/null
+++ b/contrib/libs/linux-headers/linux/surface_aggregator/cdev.h
@@ -0,0 +1,147 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/*
+ * Surface System Aggregator Module (SSAM) user-space EC interface.
+ *
+ * Definitions, structs, and IOCTLs for the /dev/surface/aggregator misc
+ * device. This device provides direct user-space access to the SSAM EC.
+ * Intended for debugging and development.
+ *
+ * Copyright (C) 2020-2021 Maximilian Luz <luzmaximilian@gmail.com>
+ */
+
+#ifndef _LINUX_SURFACE_AGGREGATOR_CDEV_H
+#define _LINUX_SURFACE_AGGREGATOR_CDEV_H
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+/**
+ * enum ssam_cdev_request_flags - Request flags for SSAM cdev request IOCTL.
+ *
+ * @SSAM_CDEV_REQUEST_HAS_RESPONSE:
+ *	Specifies that the request expects a response. If not set, the request
+ *	will be directly completed after its underlying packet has been
+ *	transmitted. If set, the request transport system waits for a response
+ *	of the request.
+ *
+ * @SSAM_CDEV_REQUEST_UNSEQUENCED:
+ *	Specifies that the request should be transmitted via an unsequenced
+ *	packet. If set, the request must not have a response, meaning that this
+ *	flag and the %SSAM_CDEV_REQUEST_HAS_RESPONSE flag are mutually
+ *	exclusive.
+ */
+enum ssam_cdev_request_flags {
+	SSAM_CDEV_REQUEST_HAS_RESPONSE = 0x01,
+	SSAM_CDEV_REQUEST_UNSEQUENCED  = 0x02,
+};
+
+/**
+ * struct ssam_cdev_request - Controller request IOCTL argument.
+ * @target_category: Target category of the SAM request.
+ * @target_id:       Target ID of the SAM request.
+ * @command_id:      Command ID of the SAM request.
+ * @instance_id:     Instance ID of the SAM request.
+ * @flags:           Request flags (see &enum ssam_cdev_request_flags).
+ * @status:          Request status (output).
+ * @payload:         Request payload (input data).
+ * @payload.data:    Pointer to request payload data.
+ * @payload.length:  Length of request payload data (in bytes).
+ * @response:        Request response (output data).
+ * @response.data:   Pointer to response buffer.
+ * @response.length: On input: Capacity of response buffer (in bytes).
+ *                   On output: Length of request response (number of bytes
+ *                   in the buffer that are actually used).
+ */
+struct ssam_cdev_request {
+	__u8 target_category;
+	__u8 target_id;
+	__u8 command_id;
+	__u8 instance_id;
+	__u16 flags;
+	__s16 status;
+
+	struct {
+		__u64 data;
+		__u16 length;
+		__u8 __pad[6];
+	} payload;
+
+	struct {
+		__u64 data;
+		__u16 length;
+		__u8 __pad[6];
+	} response;
+} __attribute__((__packed__));
+
+/**
+ * struct ssam_cdev_notifier_desc - Notifier descriptor.
+ * @priority:        Priority value determining the order in which notifier
+ *                   callbacks will be called. A higher value means higher
+ *                   priority, i.e. the associated callback will be executed
+ *                   earlier than other (lower priority) callbacks.
+ * @target_category: The event target category for which this notifier should
+ *                   receive events.
+ *
+ * Specifies the notifier that should be registered or unregistered,
+ * specifically with which priority and for which target category of events.
+ */
+struct ssam_cdev_notifier_desc {
+	__s32 priority;
+	__u8 target_category;
+} __attribute__((__packed__));
+
+/**
+ * struct ssam_cdev_event_desc - Event descriptor.
+ * @reg:                 Registry via which the event will be enabled/disabled.
+ * @reg.target_category: Target category for the event registry requests.
+ * @reg.target_id:       Target ID for the event registry requests.
+ * @reg.cid_enable:      Command ID for the event-enable request.
+ * @reg.cid_disable:     Command ID for the event-disable request.
+ * @id:                  ID specifying the event.
+ * @id.target_category:  Target category of the event source.
+ * @id.instance:         Instance ID of the event source.
+ * @flags:               Flags used for enabling the event.
+ *
+ * Specifies which event should be enabled/disabled and how to do that.
+ */
+struct ssam_cdev_event_desc {
+	struct {
+		__u8 target_category;
+		__u8 target_id;
+		__u8 cid_enable;
+		__u8 cid_disable;
+	} reg;
+
+	struct {
+		__u8 target_category;
+		__u8 instance;
+	} id;
+
+	__u8 flags;
+} __attribute__((__packed__));
+
+/**
+ * struct ssam_cdev_event - SSAM event sent by the EC.
+ * @target_category: Target category of the event source. See &enum ssam_ssh_tc.
+ * @target_id:       Target ID of the event source.
+ * @command_id:      Command ID of the event.
+ * @instance_id:     Instance ID of the event source.
+ * @length:          Length of the event payload in bytes.
+ * @data:            Event payload data.
+ */
+struct ssam_cdev_event {
+	__u8 target_category;
+	__u8 target_id;
+	__u8 command_id;
+	__u8 instance_id;
+	__u16 length;
+	__u8 data[];
+} __attribute__((__packed__));
+
+#define SSAM_CDEV_REQUEST		_IOWR(0xA5, 1, struct ssam_cdev_request)
+#define SSAM_CDEV_NOTIF_REGISTER	_IOW(0xA5, 2, struct ssam_cdev_notifier_desc)
+#define SSAM_CDEV_NOTIF_UNREGISTER	_IOW(0xA5, 3, struct ssam_cdev_notifier_desc)
+#define SSAM_CDEV_EVENT_ENABLE		_IOW(0xA5, 4, struct ssam_cdev_event_desc)
+#define SSAM_CDEV_EVENT_DISABLE		_IOW(0xA5, 5, struct ssam_cdev_event_desc)
+
+#endif /* _LINUX_SURFACE_AGGREGATOR_CDEV_H */
diff --git a/contrib/libs/linux-headers/linux/surface_aggregator/dtx.h b/contrib/libs/linux-headers/linux/surface_aggregator/dtx.h
new file mode 100644
index 0000000000..250ef062d1
--- /dev/null
+++ b/contrib/libs/linux-headers/linux/surface_aggregator/dtx.h
@@ -0,0 +1,146 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/*
+ * Surface DTX (clipboard detachment system driver) user-space interface.
+ *
+ * Definitions, structs, and IOCTLs for the /dev/surface/dtx misc device. This
+ * device allows user-space to control the clipboard detachment process on
+ * Surface Book series devices.
+ *
+ * Copyright (C) 2020-2021 Maximilian Luz <luzmaximilian@gmail.com>
+ */
+
+#ifndef _LINUX_SURFACE_AGGREGATOR_DTX_H
+#define _LINUX_SURFACE_AGGREGATOR_DTX_H
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+/* Status/error categories */
+#define SDTX_CATEGORY_STATUS		0x0000
+#define SDTX_CATEGORY_RUNTIME_ERROR	0x1000
+#define SDTX_CATEGORY_HARDWARE_ERROR	0x2000
+#define SDTX_CATEGORY_UNKNOWN		0xf000
+
+#define SDTX_CATEGORY_MASK		0xf000
+#define SDTX_CATEGORY(value)		((value) & SDTX_CATEGORY_MASK)
+
+#define SDTX_STATUS(code)		((code) | SDTX_CATEGORY_STATUS)
+#define SDTX_ERR_RT(code)		((code) | SDTX_CATEGORY_RUNTIME_ERROR)
+#define SDTX_ERR_HW(code)		((code) | SDTX_CATEGORY_HARDWARE_ERROR)
+#define SDTX_UNKNOWN(code)		((code) | SDTX_CATEGORY_UNKNOWN)
+
+#define SDTX_SUCCESS(value)		(SDTX_CATEGORY(value) == SDTX_CATEGORY_STATUS)
+
+/* Latch status values */
+#define SDTX_LATCH_CLOSED		SDTX_STATUS(0x00)
+#define SDTX_LATCH_OPENED		SDTX_STATUS(0x01)
+
+/* Base state values */
+#define SDTX_BASE_DETACHED		SDTX_STATUS(0x00)
+#define SDTX_BASE_ATTACHED		SDTX_STATUS(0x01)
+
+/* Runtime errors (non-critical) */
+#define SDTX_DETACH_NOT_FEASIBLE	SDTX_ERR_RT(0x01)
+#define SDTX_DETACH_TIMEDOUT		SDTX_ERR_RT(0x02)
+
+/* Hardware errors (critical) */
+#define SDTX_ERR_FAILED_TO_OPEN		SDTX_ERR_HW(0x01)
+#define SDTX_ERR_FAILED_TO_REMAIN_OPEN	SDTX_ERR_HW(0x02)
+#define SDTX_ERR_FAILED_TO_CLOSE	SDTX_ERR_HW(0x03)
+
+/* Base types */
+#define SDTX_DEVICE_TYPE_HID		0x0100
+#define SDTX_DEVICE_TYPE_SSH		0x0200
+
+#define SDTX_DEVICE_TYPE_MASK		0x0f00
+#define SDTX_DEVICE_TYPE(value)		((value) & SDTX_DEVICE_TYPE_MASK)
+
+#define SDTX_BASE_TYPE_HID(id)		((id) | SDTX_DEVICE_TYPE_HID)
+#define SDTX_BASE_TYPE_SSH(id)		((id) | SDTX_DEVICE_TYPE_SSH)
+
+/**
+ * enum sdtx_device_mode - Mode describing how (and if) the clipboard is
+ * attached to the base of the device.
+ * @SDTX_DEVICE_MODE_TABLET: The clipboard is detached from the base and the
+ *                           device operates as tablet.
+ * @SDTX_DEVICE_MODE_LAPTOP: The clipboard is attached normally to the base
+ *                           and the device operates as laptop.
+ * @SDTX_DEVICE_MODE_STUDIO: The clipboard is attached to the base in reverse.
+ *                           The device operates as tablet with keyboard and
+ *                           touchpad deactivated, however, the base battery
+ *                           and, if present in the specific device model, dGPU
+ *                           are available to the system.
+ */
+enum sdtx_device_mode {
+	SDTX_DEVICE_MODE_TABLET		= 0x00,
+	SDTX_DEVICE_MODE_LAPTOP		= 0x01,
+	SDTX_DEVICE_MODE_STUDIO		= 0x02,
+};
+
+/**
+ * struct sdtx_event - Event provided by reading from the DTX device file.
+ * @length: Length of the event payload, in bytes.
+ * @code:   Event code, detailing what type of event this is.
+ * @data:   Payload of the event, containing @length bytes.
+ *
+ * See &enum sdtx_event_code for currently valid event codes.
+ */
+struct sdtx_event {
+	__u16 length;
+	__u16 code;
+	__u8 data[];
+} __attribute__((__packed__));
+
+/**
+ * enum sdtx_event_code - Code describing the type of an event.
+ * @SDTX_EVENT_REQUEST:         Detachment request event type.
+ * @SDTX_EVENT_CANCEL:          Cancel detachment process event type.
+ * @SDTX_EVENT_BASE_CONNECTION: Base/clipboard connection change event type.
+ * @SDTX_EVENT_LATCH_STATUS:    Latch status change event type.
+ * @SDTX_EVENT_DEVICE_MODE:     Device mode change event type.
+ *
+ * Used in &struct sdtx_event to describe the type of the event. Further event
+ * codes are reserved for future use. Any event parser should be able to
+ * gracefully handle unknown events, i.e. by simply skipping them.
+ *
+ * Consult the DTX user-space interface documentation for details regarding
+ * the individual event types.
+ */
+enum sdtx_event_code {
+	SDTX_EVENT_REQUEST		= 1,
+	SDTX_EVENT_CANCEL		= 2,
+	SDTX_EVENT_BASE_CONNECTION	= 3,
+	SDTX_EVENT_LATCH_STATUS		= 4,
+	SDTX_EVENT_DEVICE_MODE		= 5,
+};
+
+/**
+ * struct sdtx_base_info - Describes if and what type of base is connected.
+ * @state:   The state of the connection. Valid values are %SDTX_BASE_DETACHED,
+ *           %SDTX_BASE_ATTACHED, and %SDTX_DETACH_NOT_FEASIBLE (in case a base
+ *           is attached but low clipboard battery prevents detachment). Other
+ *           values are currently reserved.
+ * @base_id: The type of base connected. Zero if no base is connected.
+ */
+struct sdtx_base_info {
+	__u16 state;
+	__u16 base_id;
+} __attribute__((__packed__));
+
+/* IOCTLs */
+#define SDTX_IOCTL_EVENTS_ENABLE	_IO(0xa5, 0x21)
+#define SDTX_IOCTL_EVENTS_DISABLE	_IO(0xa5, 0x22)
+
+#define SDTX_IOCTL_LATCH_LOCK		_IO(0xa5, 0x23)
+#define SDTX_IOCTL_LATCH_UNLOCK		_IO(0xa5, 0x24)
+
+#define SDTX_IOCTL_LATCH_REQUEST	_IO(0xa5, 0x25)
+#define SDTX_IOCTL_LATCH_CONFIRM	_IO(0xa5, 0x26)
+#define SDTX_IOCTL_LATCH_HEARTBEAT	_IO(0xa5, 0x27)
+#define SDTX_IOCTL_LATCH_CANCEL		_IO(0xa5, 0x28)
+
+#define SDTX_IOCTL_GET_BASE_INFO	_IOR(0xa5, 0x29, struct sdtx_base_info)
+#define SDTX_IOCTL_GET_DEVICE_MODE	_IOR(0xa5, 0x2a, __u16)
+#define SDTX_IOCTL_GET_LATCH_STATUS	_IOR(0xa5, 0x2b, __u16)
+
+#endif /* _LINUX_SURFACE_AGGREGATOR_DTX_H */