Restoring authorship annotation for <orivej@yandex-team.ru>. Commit 1 of 2.

1 files changed, 6828 insertions, 6828 deletions

diff --git a/contrib/libs/linux-headers/linux/nl80211.h b/contrib/libs/linux-headers/linux/nl80211.h
index 2b69116183..452a793c0f 100644
--- a/contrib/libs/linux-headers/linux/nl80211.h
+++ b/contrib/libs/linux-headers/linux/nl80211.h
@@ -1,6828 +1,6828 @@
-#ifndef __LINUX_NL80211_H
-#define __LINUX_NL80211_H
-/*
- * 802.11 netlink interface public header
- *
- * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net>
- * Copyright 2008 Michael Wu <flamingice@sourmilk.net>
- * Copyright 2008 Luis Carlos Cobo <luisca@cozybit.com>
- * Copyright 2008 Michael Buesch <m@bues.ch>
- * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com>
- * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
- * Copyright 2008 Colin McCabe <colin@cozybit.com>
- * Copyright 2015-2017	Intel Deutschland GmbH
- * Copyright (C) 2018-2020 Intel Corporation
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-/*
- * This header file defines the userspace API to the wireless stack. Please
- * be careful not to break things - i.e. don't move anything around or so
- * unless you can demonstrate that it breaks neither API nor ABI.
- *
- * Additions to the API should be accompanied by actual implementations in
- * an upstream driver, so that example implementations exist in case there
- * are ever concerns about the precise semantics of the API or changes are
- * needed, and to ensure that code for dead (no longer implemented) API
- * can actually be identified and removed.
- * Nonetheless, semantics should also be documented carefully in this file.
- */
-
-#include <linux/types.h>
-
-#define NL80211_GENL_NAME "nl80211"
-
-#define NL80211_MULTICAST_GROUP_CONFIG		"config"
-#define NL80211_MULTICAST_GROUP_SCAN		"scan"
-#define NL80211_MULTICAST_GROUP_REG		"regulatory"
-#define NL80211_MULTICAST_GROUP_MLME		"mlme"
-#define NL80211_MULTICAST_GROUP_VENDOR		"vendor"
-#define NL80211_MULTICAST_GROUP_NAN		"nan"
-#define NL80211_MULTICAST_GROUP_TESTMODE	"testmode"
-
-#define NL80211_EDMG_BW_CONFIG_MIN	4
-#define NL80211_EDMG_BW_CONFIG_MAX	15
-#define NL80211_EDMG_CHANNELS_MIN	1
-#define NL80211_EDMG_CHANNELS_MAX	0x3c /* 0b00111100 */
-
-/**
- * DOC: Station handling
- *
- * Stations are added per interface, but a special case exists with VLAN
- * interfaces. When a station is bound to an AP interface, it may be moved
- * into a VLAN identified by a VLAN interface index (%NL80211_ATTR_STA_VLAN).
- * The station is still assumed to belong to the AP interface it was added
- * to.
- *
- * Station handling varies per interface type and depending on the driver's
- * capabilities.
- *
- * For drivers supporting TDLS with external setup (WIPHY_FLAG_SUPPORTS_TDLS
- * and WIPHY_FLAG_TDLS_EXTERNAL_SETUP), the station lifetime is as follows:
- *  - a setup station entry is added, not yet authorized, without any rate
- *    or capability information, this just exists to avoid race conditions
- *  - when the TDLS setup is done, a single NL80211_CMD_SET_STATION is valid
- *    to add rate and capability information to the station and at the same
- *    time mark it authorized.
- *  - %NL80211_TDLS_ENABLE_LINK is then used
- *  - after this, the only valid operation is to remove it by tearing down
- *    the TDLS link (%NL80211_TDLS_DISABLE_LINK)
- *
- * TODO: need more info for other interface types
- */
-
-/**
- * DOC: Frame transmission/registration support
- *
- * Frame transmission and registration support exists to allow userspace
- * management entities such as wpa_supplicant react to management frames
- * that are not being handled by the kernel. This includes, for example,
- * certain classes of action frames that cannot be handled in the kernel
- * for various reasons.
- *
- * Frame registration is done on a per-interface basis and registrations
- * cannot be removed other than by closing the socket. It is possible to
- * specify a registration filter to register, for example, only for a
- * certain type of action frame. In particular with action frames, those
- * that userspace registers for will not be returned as unhandled by the
- * driver, so that the registered application has to take responsibility
- * for doing that.
- *
- * The type of frame that can be registered for is also dependent on the
- * driver and interface type. The frame types are advertised in wiphy
- * attributes so applications know what to expect.
- *
- * NOTE: When an interface changes type while registrations are active,
- *       these registrations are ignored until the interface type is
- *       changed again. This means that changing the interface type can
- *       lead to a situation that couldn't otherwise be produced, but
- *       any such registrations will be dormant in the sense that they
- *       will not be serviced, i.e. they will not receive any frames.
- *
- * Frame transmission allows userspace to send for example the required
- * responses to action frames. It is subject to some sanity checking,
- * but many frames can be transmitted. When a frame was transmitted, its
- * status is indicated to the sending socket.
- *
- * For more technical details, see the corresponding command descriptions
- * below.
- */
-
-/**
- * DOC: Virtual interface / concurrency capabilities
- *
- * Some devices are able to operate with virtual MACs, they can have
- * more than one virtual interface. The capability handling for this
- * is a bit complex though, as there may be a number of restrictions
- * on the types of concurrency that are supported.
- *
- * To start with, each device supports the interface types listed in
- * the %NL80211_ATTR_SUPPORTED_IFTYPES attribute, but by listing the
- * types there no concurrency is implied.
- *
- * Once concurrency is desired, more attributes must be observed:
- * To start with, since some interface types are purely managed in
- * software, like the AP-VLAN type in mac80211 for example, there's
- * an additional list of these, they can be added at any time and
- * are only restricted by some semantic restrictions (e.g. AP-VLAN
- * cannot be added without a corresponding AP interface). This list
- * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute.
- *
- * Further, the list of supported combinations is exported. This is
- * in the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute. Basically,
- * it exports a list of "groups", and at any point in time the
- * interfaces that are currently active must fall into any one of
- * the advertised groups. Within each group, there are restrictions
- * on the number of interfaces of different types that are supported
- * and also the number of different channels, along with potentially
- * some other restrictions. See &enum nl80211_if_combination_attrs.
- *
- * All together, these attributes define the concurrency of virtual
- * interfaces that a given device supports.
- */
-
-/**
- * DOC: packet coalesce support
- *
- * In most cases, host that receives IPv4 and IPv6 multicast/broadcast
- * packets does not do anything with these packets. Therefore the
- * reception of these unwanted packets causes unnecessary processing
- * and power consumption.
- *
- * Packet coalesce feature helps to reduce number of received interrupts
- * to host by buffering these packets in firmware/hardware for some
- * predefined time. Received interrupt will be generated when one of the
- * following events occur.
- * a) Expiration of hardware timer whose expiration time is set to maximum
- * coalescing delay of matching coalesce rule.
- * b) Coalescing buffer in hardware reaches it's limit.
- * c) Packet doesn't match any of the configured coalesce rules.
- *
- * User needs to configure following parameters for creating a coalesce
- * rule.
- * a) Maximum coalescing delay
- * b) List of packet patterns which needs to be matched
- * c) Condition for coalescence. pattern 'match' or 'no match'
- * Multiple such rules can be created.
- */
-
-/**
- * DOC: WPA/WPA2 EAPOL handshake offload
- *
- * By setting @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK flag drivers
- * can indicate they support offloading EAPOL handshakes for WPA/WPA2
- * preshared key authentication. In %NL80211_CMD_CONNECT the preshared
- * key should be specified using %NL80211_ATTR_PMK. Drivers supporting
- * this offload may reject the %NL80211_CMD_CONNECT when no preshared
- * key material is provided, for example when that driver does not
- * support setting the temporal keys through %CMD_NEW_KEY.
- *
- * Similarly @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X flag can be
- * set by drivers indicating offload support of the PTK/GTK EAPOL
- * handshakes during 802.1X authentication. In order to use the offload
- * the %NL80211_CMD_CONNECT should have %NL80211_ATTR_WANT_1X_4WAY_HS
- * attribute flag. Drivers supporting this offload may reject the
- * %NL80211_CMD_CONNECT when the attribute flag is not present.
- *
- * For 802.1X the PMK or PMK-R0 are set by providing %NL80211_ATTR_PMK
- * using %NL80211_CMD_SET_PMK. For offloaded FT support also
- * %NL80211_ATTR_PMKR0_NAME must be provided.
- */
-
-/**
- * DOC: FILS shared key authentication offload
- *
- * FILS shared key authentication offload can be advertized by drivers by
- * setting @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD flag. The drivers that support
- * FILS shared key authentication offload should be able to construct the
- * authentication and association frames for FILS shared key authentication and
- * eventually do a key derivation as per IEEE 802.11ai. The below additional
- * parameters should be given to driver in %NL80211_CMD_CONNECT and/or in
- * %NL80211_CMD_UPDATE_CONNECT_PARAMS.
- *	%NL80211_ATTR_FILS_ERP_USERNAME - used to construct keyname_nai
- *	%NL80211_ATTR_FILS_ERP_REALM - used to construct keyname_nai
- *	%NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used to construct erp message
- *	%NL80211_ATTR_FILS_ERP_RRK - used to generate the rIK and rMSK
- * rIK should be used to generate an authentication tag on the ERP message and
- * rMSK should be used to derive a PMKSA.
- * rIK, rMSK should be generated and keyname_nai, sequence number should be used
- * as specified in IETF RFC 6696.
- *
- * When FILS shared key authentication is completed, driver needs to provide the
- * below additional parameters to userspace, which can be either after setting
- * up a connection or after roaming.
- *	%NL80211_ATTR_FILS_KEK - used for key renewal
- *	%NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used in further EAP-RP exchanges
- *	%NL80211_ATTR_PMKID - used to identify the PMKSA used/generated
- *	%Nl80211_ATTR_PMK - used to update PMKSA cache in userspace
- * The PMKSA can be maintained in userspace persistently so that it can be used
- * later after reboots or wifi turn off/on also.
- *
- * %NL80211_ATTR_FILS_CACHE_ID is the cache identifier advertized by a FILS
- * capable AP supporting PMK caching. It specifies the scope within which the
- * PMKSAs are cached in an ESS. %NL80211_CMD_SET_PMKSA and
- * %NL80211_CMD_DEL_PMKSA are enhanced to allow support for PMKSA caching based
- * on FILS cache identifier. Additionally %NL80211_ATTR_PMK is used with
- * %NL80211_SET_PMKSA to specify the PMK corresponding to a PMKSA for driver to
- * use in a FILS shared key connection with PMKSA caching.
- */
-
-/**
- * DOC: SAE authentication offload
- *
- * By setting @NL80211_EXT_FEATURE_SAE_OFFLOAD flag drivers can indicate they
- * support offloading SAE authentication for WPA3-Personal networks. In
- * %NL80211_CMD_CONNECT the password for SAE should be specified using
- * %NL80211_ATTR_SAE_PASSWORD.
- */
-
-/**
- * DOC: VLAN offload support for setting group keys and binding STAs to VLANs
- *
- * By setting @NL80211_EXT_FEATURE_VLAN_OFFLOAD flag drivers can indicate they
- * support offloading VLAN functionality in a manner where the driver exposes a
- * single netdev that uses VLAN tagged frames and separate VLAN-specific netdevs
- * can then be added using RTM_NEWLINK/IFLA_VLAN_ID similarly to the Ethernet
- * case. Frames received from stations that are not assigned to any VLAN are
- * delivered on the main netdev and frames to such stations can be sent through
- * that main netdev.
- *
- * %NL80211_CMD_NEW_KEY (for group keys), %NL80211_CMD_NEW_STATION, and
- * %NL80211_CMD_SET_STATION will optionally specify vlan_id using
- * %NL80211_ATTR_VLAN_ID.
- */
-
-/**
- * DOC: TID configuration
- *
- * TID config support can be checked in the %NL80211_ATTR_TID_CONFIG
- * attribute given in wiphy capabilities.
- *
- * The necessary configuration parameters are mentioned in
- * &enum nl80211_tid_config_attr and it will be passed to the
- * %NL80211_CMD_SET_TID_CONFIG command in %NL80211_ATTR_TID_CONFIG.
- *
- * If the configuration needs to be applied for specific peer then the MAC
- * address of the peer needs to be passed in %NL80211_ATTR_MAC, otherwise the
- * configuration will be applied for all the connected peers in the vif except
- * any peers that have peer specific configuration for the TID by default; if
- * the %NL80211_TID_CONFIG_ATTR_OVERRIDE flag is set, peer specific values
- * will be overwritten.
- *
- * All this configuration is valid only for STA's current connection
- * i.e. the configuration will be reset to default when the STA connects back
- * after disconnection/roaming, and this configuration will be cleared when
- * the interface goes down.
- */
-
-/**
- * enum nl80211_commands - supported nl80211 commands
- *
- * @NL80211_CMD_UNSPEC: unspecified command to catch errors
- *
- * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request
- *	to get a list of all present wiphys.
- * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or
- *	%NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME,
- *	%NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ (and the
- *	attributes determining the channel width; this is used for setting
- *	monitor mode channel),  %NL80211_ATTR_WIPHY_RETRY_SHORT,
- *	%NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
- *	and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD.
- *	However, for setting the channel, see %NL80211_CMD_SET_CHANNEL
- *	instead, the support here is for backward compatibility only.
- * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
- *	or rename notification. Has attributes %NL80211_ATTR_WIPHY and
- *	%NL80211_ATTR_WIPHY_NAME.
- * @NL80211_CMD_DEL_WIPHY: Wiphy deleted. Has attributes
- *	%NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME.
- *
- * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration;
- *	either a dump request for all interfaces or a specific get with a
- *	single %NL80211_ATTR_IFINDEX is supported.
- * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires
- *	%NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE.
- * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response
- *	to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX,
- *	%NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also
- *	be sent from userspace to request creation of a new virtual interface,
- *	then requires attributes %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFTYPE and
- *	%NL80211_ATTR_IFNAME.
- * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes
- *	%NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from
- *	userspace to request deletion of a virtual interface, then requires
- *	attribute %NL80211_ATTR_IFINDEX.
- *
- * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified
- *	by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC.
- * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT,
- *	%NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD.
- * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA,
- *	%NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER,
- *	and %NL80211_ATTR_KEY_SEQ attributes.
- * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX
- *	or %NL80211_ATTR_MAC.
- *
- * @NL80211_CMD_GET_BEACON: (not used)
- * @NL80211_CMD_SET_BEACON: change the beacon on an access point interface
- *	using the %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL
- *	attributes. For drivers that generate the beacon and probe responses
- *	internally, the following attributes must be provided: %NL80211_ATTR_IE,
- *	%NL80211_ATTR_IE_PROBE_RESP and %NL80211_ATTR_IE_ASSOC_RESP.
- * @NL80211_CMD_START_AP: Start AP operation on an AP interface, parameters
- *	are like for %NL80211_CMD_SET_BEACON, and additionally parameters that
- *	do not change are used, these include %NL80211_ATTR_BEACON_INTERVAL,
- *	%NL80211_ATTR_DTIM_PERIOD, %NL80211_ATTR_SSID,
- *	%NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE,
- *	%NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS,
- *	%NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY,
- *	%NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT,
- *	%NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS.
- *	The channel to use can be set on the interface or be given using the
- *	%NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width.
- * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP
- * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface
- * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP
- *
- * @NL80211_CMD_GET_STATION: Get station attributes for station identified by
- *	%NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_SET_STATION: Set station attributes for station identified by
- *	%NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_NEW_STATION: Add a station with given attributes to the
- *	the interface identified by %NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC
- *	or, if no MAC address given, all stations, on the interface identified
- *	by %NL80211_ATTR_IFINDEX. %NL80211_ATTR_MGMT_SUBTYPE and
- *	%NL80211_ATTR_REASON_CODE can optionally be used to specify which type
- *	of disconnection indication should be sent to the station
- *	(Deauthentication or Disassociation frame and reason code for that
- *	frame).
- *
- * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to
- * 	destination %NL80211_ATTR_MAC on the interface identified by
- * 	%NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_SET_MPATH:  Set mesh path attributes for mesh path to
- * 	destination %NL80211_ATTR_MAC on the interface identified by
- * 	%NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by
- *	%NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP.
- * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by
- *	%NL80211_ATTR_MAC.
- * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the
- *	the interface identified by %NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC
- *	or, if no MAC address given, all mesh paths, on the interface identified
- *	by %NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by
- *	%NL80211_ATTR_IFINDEX.
- *
- * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set
- *	regulatory domain. If %NL80211_ATTR_WIPHY is specified and the device
- *	has a private regulatory domain, it will be returned. Otherwise, the
- *	global regdomain will be returned.
- *	A device will have a private regulatory domain if it uses the
- *	regulatory_hint() API. Even when a private regdomain is used the channel
- *	information will still be mended according to further hints from
- *	the regulatory core to help with compliance. A dump version of this API
- *	is now available which will returns the global regdomain as well as
- *	all private regdomains of present wiphys (for those that have it).
- *	If a wiphy is self-managed (%NL80211_ATTR_WIPHY_SELF_MANAGED_REG), then
- *	its private regdomain is the only valid one for it. The regulatory
- *	core is not used to help with compliance in this case.
- * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command
- *	after being queried by the kernel. CRDA replies by sending a regulatory
- *	domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our
- *	current alpha2 if it found a match. It also provides
- * 	NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each
- * 	regulatory rule is a nested set of attributes  given by
- * 	%NL80211_ATTR_REG_RULE_FREQ_[START|END] and
- * 	%NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by
- * 	%NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and
- * 	%NL80211_ATTR_REG_RULE_POWER_MAX_EIRP.
- * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain
- * 	to the specified ISO/IEC 3166-1 alpha2 country code. The core will
- * 	store this as a valid request and then query userspace for it.
- *
- * @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the
- *	interface identified by %NL80211_ATTR_IFINDEX
- *
- * @NL80211_CMD_SET_MESH_CONFIG: Set mesh networking properties for the
- *      interface identified by %NL80211_ATTR_IFINDEX
- *
- * @NL80211_CMD_SET_MGMT_EXTRA_IE: Set extra IEs for management frames. The
- *	interface is identified with %NL80211_ATTR_IFINDEX and the management
- *	frame subtype with %NL80211_ATTR_MGMT_SUBTYPE. The extra IE data to be
- *	added to the end of the specified management frame is specified with
- *	%NL80211_ATTR_IE. If the command succeeds, the requested data will be
- *	added to all specified management frames generated by
- *	kernel/firmware/driver.
- *	Note: This command has been removed and it is only reserved at this
- *	point to avoid re-using existing command number. The functionality this
- *	command was planned for has been provided with cleaner design with the
- *	option to specify additional IEs in NL80211_CMD_TRIGGER_SCAN,
- *	NL80211_CMD_AUTHENTICATE, NL80211_CMD_ASSOCIATE,
- *	NL80211_CMD_DEAUTHENTICATE, and NL80211_CMD_DISASSOCIATE.
- *
- * @NL80211_CMD_GET_SCAN: get scan results
- * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters
- *	%NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
- *	probe requests at CCK rate or not. %NL80211_ATTR_BSSID can be used to
- *	specify a BSSID to scan for; if not included, the wildcard BSSID will
- *	be used.
- * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to
- *	NL80211_CMD_GET_SCAN and on the "scan" multicast group)
- * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons,
- *	partial scan results may be available
- *
- * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain
- *	intervals and certain number of cycles, as specified by
- *	%NL80211_ATTR_SCHED_SCAN_PLANS. If %NL80211_ATTR_SCHED_SCAN_PLANS is
- *	not specified and only %NL80211_ATTR_SCHED_SCAN_INTERVAL is specified,
- *	scheduled scan will run in an infinite loop with the specified interval.
- *	These attributes are mutually exculsive,
- *	i.e. NL80211_ATTR_SCHED_SCAN_INTERVAL must not be passed if
- *	NL80211_ATTR_SCHED_SCAN_PLANS is defined.
- *	If for some reason scheduled scan is aborted by the driver, all scan
- *	plans are canceled (including scan plans that did not start yet).
- *	Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS)
- *	are passed, they are used in the probe requests.  For
- *	broadcast, a broadcast SSID must be passed (ie. an empty
- *	string).  If no SSID is passed, no probe requests are sent and
- *	a passive scan is performed.  %NL80211_ATTR_SCAN_FREQUENCIES,
- *	if passed, define which channels should be scanned; if not
- *	passed, all channels allowed for the current regulatory domain
- *	are used.  Extra IEs can also be passed from the userspace by
- *	using the %NL80211_ATTR_IE attribute.  The first cycle of the
- *	scheduled scan can be delayed by %NL80211_ATTR_SCHED_SCAN_DELAY
- *	is supplied. If the device supports multiple concurrent scheduled
- *	scans, it will allow such when the caller provides the flag attribute
- *	%NL80211_ATTR_SCHED_SCAN_MULTI to indicate user-space support for it.
- * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if
- *	scheduled scan is not running. The caller may assume that as soon
- *	as the call returns, it is safe to start a new scheduled scan again.
- * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan
- *	results available.
- * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has
- *	stopped.  The driver may issue this event at any time during a
- *	scheduled scan.  One reason for stopping the scan is if the hardware
- *	does not support starting an association or a normal scan while running
- *	a scheduled scan.  This event is also sent when the
- *	%NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface
- *	is brought down while a scheduled scan was running.
- *
- * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation
- *      or noise level
- * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to
- *	NL80211_CMD_GET_SURVEY and on the "scan" multicast group)
- *
- * @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry using %NL80211_ATTR_MAC
- *	(for the BSSID), %NL80211_ATTR_PMKID, and optionally %NL80211_ATTR_PMK
- *	(PMK is used for PTKSA derivation in case of FILS shared key offload) or
- *	using %NL80211_ATTR_SSID, %NL80211_ATTR_FILS_CACHE_ID,
- *	%NL80211_ATTR_PMKID, and %NL80211_ATTR_PMK in case of FILS
- *	authentication where %NL80211_ATTR_FILS_CACHE_ID is the identifier
- *	advertized by a FILS capable AP identifying the scope of PMKSA in an
- *	ESS.
- * @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC
- *	(for the BSSID) and %NL80211_ATTR_PMKID or using %NL80211_ATTR_SSID,
- *	%NL80211_ATTR_FILS_CACHE_ID, and %NL80211_ATTR_PMKID in case of FILS
- *	authentication.
- * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries.
- *
- * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
- * 	has been changed and provides details of the request information
- * 	that caused the change such as who initiated the regulatory request
- * 	(%NL80211_ATTR_REG_INITIATOR), the wiphy_idx
- * 	(%NL80211_ATTR_REG_ALPHA2) on which the request was made from if
- * 	the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or
- * 	%NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain
- * 	set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is
- * 	%NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on
- * 	to (%NL80211_ATTR_REG_ALPHA2).
- * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon
- * 	has been found while world roaming thus enabling active scan or
- * 	any mode of operation that initiates TX (beacons) on a channel
- * 	where we would not have been able to do either before. As an example
- * 	if you are world roaming (regulatory domain set to world or if your
- * 	driver is using a custom world roaming regulatory domain) and while
- * 	doing a passive scan on the 5 GHz band you find an AP there (if not
- * 	on a DFS channel) you will now be able to actively scan for that AP
- * 	or use AP mode on your card on that same channel. Note that this will
- * 	never be used for channels 1-11 on the 2 GHz band as they are always
- * 	enabled world wide. This beacon hint is only sent if your device had
- * 	either disabled active scanning or beaconing on a channel. We send to
- * 	userspace the wiphy on which we removed a restriction from
- * 	(%NL80211_ATTR_WIPHY) and the channel on which this occurred
- * 	before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER)
- * 	the beacon hint was processed.
- *
- * @NL80211_CMD_AUTHENTICATE: authentication request and notification.
- *	This command is used both as a command (request to authenticate) and
- *	as an event on the "mlme" multicast group indicating completion of the
- *	authentication process.
- *	When used as a command, %NL80211_ATTR_IFINDEX is used to identify the
- *	interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and
- *	BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify
- *	the SSID (mainly for association, but is included in authentication
- *	request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used
- *	to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE
- *	is used to specify the authentication type. %NL80211_ATTR_IE is used to
- *	define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs)
- *	to be added to the frame.
- *	When used as an event, this reports reception of an Authentication
- *	frame in station and IBSS modes when the local MLME processed the
- *	frame, i.e., it was for the local STA and was received in correct
- *	state. This is similar to MLME-AUTHENTICATE.confirm primitive in the
- *	MLME SAP interface (kernel providing MLME, userspace SME). The
- *	included %NL80211_ATTR_FRAME attribute contains the management frame
- *	(including both the header and frame body, but not FCS). This event is
- *	also used to indicate if the authentication attempt timed out. In that
- *	case the %NL80211_ATTR_FRAME attribute is replaced with a
- *	%NL80211_ATTR_TIMED_OUT flag (and %NL80211_ATTR_MAC to indicate which
- *	pending authentication timed out).
- * @NL80211_CMD_ASSOCIATE: association request and notification; like
- *	NL80211_CMD_AUTHENTICATE but for Association and Reassociation
- *	(similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request,
- *	MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives). The
- *	%NL80211_ATTR_PREV_BSSID attribute is used to specify whether the
- *	request is for the initial association to an ESS (that attribute not
- *	included) or for reassociation within the ESS (that attribute is
- *	included).
- * @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like
- *	NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to
- *	MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication
- *	primitives).
- * @NL80211_CMD_DISASSOCIATE: disassociation request and notification; like
- *	NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to
- *	MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives).
- *
- * @NL80211_CMD_MICHAEL_MIC_FAILURE: notification of a locally detected Michael
- *	MIC (part of TKIP) failure; sent on the "mlme" multicast group; the
- *	event includes %NL80211_ATTR_MAC to describe the source MAC address of
- *	the frame with invalid MIC, %NL80211_ATTR_KEY_TYPE to show the key
- *	type, %NL80211_ATTR_KEY_IDX to indicate the key identifier, and
- *	%NL80211_ATTR_KEY_SEQ to indicate the TSC value of the frame; this
- *	event matches with MLME-MICHAELMICFAILURE.indication() primitive
- *
- * @NL80211_CMD_JOIN_IBSS: Join a new IBSS -- given at least an SSID and a
- *	FREQ attribute (for the initial frequency if no peer can be found)
- *	and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those
- *	should be fixed rather than automatically determined. Can only be
- *	executed on a network interface that is UP, and fixed BSSID/FREQ
- *	may be rejected. Another optional parameter is the beacon interval,
- *	given in the %NL80211_ATTR_BEACON_INTERVAL attribute, which if not
- *	given defaults to 100 TU (102.4ms).
- * @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is
- *	determined by the network interface.
- *
- * @NL80211_CMD_TESTMODE: testmode command, takes a wiphy (or ifindex) attribute
- *	to identify the device, and the TESTDATA blob attribute to pass through
- *	to the driver.
- *
- * @NL80211_CMD_CONNECT: connection request and notification; this command
- *	requests to connect to a specified network but without separating
- *	auth and assoc steps. For this, you need to specify the SSID in a
- *	%NL80211_ATTR_SSID attribute, and can optionally specify the association
- *	IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP,
- *	%NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
- *	%NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
- *	%NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT,
- *	%NL80211_ATTR_CONTROL_PORT_OVER_NL80211, %NL80211_ATTR_MAC_HINT, and
- *	%NL80211_ATTR_WIPHY_FREQ_HINT.
- *	If included, %NL80211_ATTR_MAC and %NL80211_ATTR_WIPHY_FREQ are
- *	restrictions on BSS selection, i.e., they effectively prevent roaming
- *	within the ESS. %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT
- *	can be included to provide a recommendation of the initial BSS while
- *	allowing the driver to roam to other BSSes within the ESS and also to
- *	ignore this recommendation if the indicated BSS is not ideal. Only one
- *	set of BSSID,frequency parameters is used (i.e., either the enforcing
- *	%NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict
- *	%NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT).
- *	Driver shall not modify the IEs specified through %NL80211_ATTR_IE if
- *	%NL80211_ATTR_MAC is included. However, if %NL80211_ATTR_MAC_HINT is
- *	included, these IEs through %NL80211_ATTR_IE are specified by the user
- *	space based on the best possible BSS selected. Thus, if the driver ends
- *	up selecting a different BSS, it can modify these IEs accordingly (e.g.
- *	userspace asks the driver to perform PMKSA caching with BSS1 and the
- *	driver ends up selecting BSS2 with different PMKSA cache entry; RSNIE
- *	has to get updated with the apt PMKID).
- *	%NL80211_ATTR_PREV_BSSID can be used to request a reassociation within
- *	the ESS in case the device is already associated and an association with
- *	a different BSS is desired.
- *	Background scan period can optionally be
- *	specified in %NL80211_ATTR_BG_SCAN_PERIOD,
- *	if not specified default background scan configuration
- *	in driver is used and if period value is 0, bg scan will be disabled.
- *	This attribute is ignored if driver does not support roam scan.
- *	It is also sent as an event, with the BSSID and response IEs when the
- *	connection is established or failed to be established. This can be
- *	determined by the %NL80211_ATTR_STATUS_CODE attribute (0 = success,
- *	non-zero = failure). If %NL80211_ATTR_TIMED_OUT is included in the
- *	event, the connection attempt failed due to not being able to initiate
- *	authentication/association or not receiving a response from the AP.
- *	Non-zero %NL80211_ATTR_STATUS_CODE value is indicated in that case as
- *	well to remain backwards compatible.
- *	When establishing a security association, drivers that support 4 way
- *	handshake offload should send %NL80211_CMD_PORT_AUTHORIZED event when
- *	the 4 way handshake is completed successfully.
- * @NL80211_CMD_ROAM: Notification indicating the card/driver roamed by itself.
- *	When a security association was established with the new AP (e.g. if
- *	the FT protocol was used for roaming or the driver completed the 4 way
- *	handshake), this event should be followed by an
- *	%NL80211_CMD_PORT_AUTHORIZED event.
- * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
- *	userspace that a connection was dropped by the AP or due to other
- *	reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and
- *	%NL80211_ATTR_REASON_CODE attributes are used.
- *
- * @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices
- *	associated with this wiphy must be down and will follow.
- *
- * @NL80211_CMD_REMAIN_ON_CHANNEL: Request to remain awake on the specified
- *	channel for the specified amount of time. This can be used to do
- *	off-channel operations like transmit a Public Action frame and wait for
- *	a response while being associated to an AP on another channel.
- *	%NL80211_ATTR_IFINDEX is used to specify which interface (and thus
- *	radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the
- *	frequency for the operation.
- *	%NL80211_ATTR_DURATION is used to specify the duration in milliseconds
- *	to remain on the channel. This command is also used as an event to
- *	notify when the requested duration starts (it may take a while for the
- *	driver to schedule this time due to other concurrent needs for the
- *	radio).
- *	When called, this operation returns a cookie (%NL80211_ATTR_COOKIE)
- *	that will be included with any events pertaining to this request;
- *	the cookie is also used to cancel the request.
- * @NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL: This command can be used to cancel a
- *	pending remain-on-channel duration if the desired operation has been
- *	completed prior to expiration of the originally requested duration.
- *	%NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify the
- *	radio. The %NL80211_ATTR_COOKIE attribute must be given as well to
- *	uniquely identify the request.
- *	This command is also used as an event to notify when a requested
- *	remain-on-channel duration has expired.
- *
- * @NL80211_CMD_SET_TX_BITRATE_MASK: Set the mask of rates to be used in TX
- *	rate selection. %NL80211_ATTR_IFINDEX is used to specify the interface
- *	and @NL80211_ATTR_TX_RATES the set of allowed rates.
- *
- * @NL80211_CMD_REGISTER_FRAME: Register for receiving certain mgmt frames
- *	(via @NL80211_CMD_FRAME) for processing in userspace. This command
- *	requires an interface index, a frame type attribute (optional for
- *	backward compatibility reasons, if not given assumes action frames)
- *	and a match attribute containing the first few bytes of the frame
- *	that should match, e.g. a single byte for only a category match or
- *	four bytes for vendor frames including the OUI. The registration
- *	cannot be dropped, but is removed automatically when the netlink
- *	socket is closed. Multiple registrations can be made.
- * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for
- *	backward compatibility
- * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This
- *	command is used both as a request to transmit a management frame and
- *	as an event indicating reception of a frame that was not processed in
- *	kernel code, but is for us (i.e., which may need to be processed in a
- *	user space application). %NL80211_ATTR_FRAME is used to specify the
- *	frame contents (including header). %NL80211_ATTR_WIPHY_FREQ is used
- *	to indicate on which channel the frame is to be transmitted or was
- *	received. If this channel is not the current channel (remain-on-channel
- *	or the operational channel) the device will switch to the given channel
- *	and transmit the frame, optionally waiting for a response for the time
- *	specified using %NL80211_ATTR_DURATION. When called, this operation
- *	returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the
- *	TX status event pertaining to the TX request.
- *	%NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
- *	management frames at CCK rate or not in 2GHz band.
- *	%NL80211_ATTR_CSA_C_OFFSETS_TX is an array of offsets to CSA
- *	counters which will be updated to the current value. This attribute
- *	is used during CSA period.
- * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this
- *	command may be used with the corresponding cookie to cancel the wait
- *	time if it is known that it is no longer necessary.  This command is
- *	also sent as an event whenever the driver has completed the off-channel
- *	wait time.
- * @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility.
- * @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame
- *	transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies
- *	the TX command and %NL80211_ATTR_FRAME includes the contents of the
- *	frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged
- *	the frame.
- * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for
- *	backward compatibility.
- *
- * @NL80211_CMD_SET_POWER_SAVE: Set powersave, using %NL80211_ATTR_PS_STATE
- * @NL80211_CMD_GET_POWER_SAVE: Get powersave status in %NL80211_ATTR_PS_STATE
- *
- * @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command
- *	is used to configure connection quality monitoring notification trigger
- *	levels.
- * @NL80211_CMD_NOTIFY_CQM: Connection quality monitor notification. This
- *	command is used as an event to indicate the that a trigger level was
- *	reached.
- * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ
- *	and the attributes determining channel width) the given interface
- *	(identifed by %NL80211_ATTR_IFINDEX) shall operate on.
- *	In case multiple channels are supported by the device, the mechanism
- *	with which it switches channels is implementation-defined.
- *	When a monitor interface is given, it can only switch channel while
- *	no other interfaces are operating to avoid disturbing the operation
- *	of any other interfaces, and other interfaces will again take
- *	precedence when they are used.
- *
- * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface.
- *
- * @NL80211_CMD_SET_MULTICAST_TO_UNICAST: Configure if this AP should perform
- *	multicast to unicast conversion. When enabled, all multicast packets
- *	with ethertype ARP, IPv4 or IPv6 (possibly within an 802.1Q header)
- *	will be sent out to each station once with the destination (multicast)
- *	MAC address replaced by the station's MAC address. Note that this may
- *	break certain expectations of the receiver, e.g. the ability to drop
- *	unicast IP packets encapsulated in multicast L2 frames, or the ability
- *	to not send destination unreachable messages in such cases.
- *	This can only be toggled per BSS. Configure this on an interface of
- *	type %NL80211_IFTYPE_AP. It applies to all its VLAN interfaces
- *	(%NL80211_IFTYPE_AP_VLAN), except for those in 4addr (WDS) mode.
- *	If %NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED is not present with this
- *	command, the feature is disabled.
- *
- * @NL80211_CMD_JOIN_MESH: Join a mesh. The mesh ID must be given, and initial
- *	mesh config parameters may be given.
- * @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the
- *	network is determined by the network interface.
- *
- * @NL80211_CMD_UNPROT_DEAUTHENTICATE: Unprotected deauthentication frame
- *	notification. This event is used to indicate that an unprotected
- *	deauthentication frame was dropped when MFP is in use.
- * @NL80211_CMD_UNPROT_DISASSOCIATE: Unprotected disassociation frame
- *	notification. This event is used to indicate that an unprotected
- *	disassociation frame was dropped when MFP is in use.
- *
- * @NL80211_CMD_NEW_PEER_CANDIDATE: Notification on the reception of a
- *      beacon or probe response from a compatible mesh peer.  This is only
- *      sent while no station information (sta_info) exists for the new peer
- *      candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH,
- *      @NL80211_MESH_SETUP_USERSPACE_AMPE, or
- *      @NL80211_MESH_SETUP_USERSPACE_MPM is set.  On reception of this
- *      notification, userspace may decide to create a new station
- *      (@NL80211_CMD_NEW_STATION).  To stop this notification from
- *      reoccurring, the userspace authentication daemon may want to create the
- *      new station with the AUTHENTICATED flag unset and maybe change it later
- *      depending on the authentication result.
- *
- * @NL80211_CMD_GET_WOWLAN: get Wake-on-Wireless-LAN (WoWLAN) settings.
- * @NL80211_CMD_SET_WOWLAN: set Wake-on-Wireless-LAN (WoWLAN) settings.
- *	Since wireless is more complex than wired ethernet, it supports
- *	various triggers. These triggers can be configured through this
- *	command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For
- *	more background information, see
- *	http://wireless.kernel.org/en/users/Documentation/WoWLAN.
- *	The @NL80211_CMD_SET_WOWLAN command can also be used as a notification
- *	from the driver reporting the wakeup reason. In this case, the
- *	@NL80211_ATTR_WOWLAN_TRIGGERS attribute will contain the reason
- *	for the wakeup, if it was caused by wireless. If it is not present
- *	in the wakeup notification, the wireless device didn't cause the
- *	wakeup but reports that it was woken up.
- *
- * @NL80211_CMD_SET_REKEY_OFFLOAD: This command is used give the driver
- *	the necessary information for supporting GTK rekey offload. This
- *	feature is typically used during WoWLAN. The configuration data
- *	is contained in %NL80211_ATTR_REKEY_DATA (which is nested and
- *	contains the data in sub-attributes). After rekeying happened,
- *	this command may also be sent by the driver as an MLME event to
- *	inform userspace of the new replay counter.
- *
- * @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace
- *	of PMKSA caching dandidates.
- *
- * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup).
- *	In addition, this can be used as an event to request userspace to take
- *	actions on TDLS links (set up a new link or tear down an existing one).
- *	In such events, %NL80211_ATTR_TDLS_OPERATION indicates the requested
- *	operation, %NL80211_ATTR_MAC contains the peer MAC address, and
- *	%NL80211_ATTR_REASON_CODE the reason code to be used (only with
- *	%NL80211_TDLS_TEARDOWN).
- * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame. The
- *	%NL80211_ATTR_TDLS_ACTION attribute determines the type of frame to be
- *	sent. Public Action codes (802.11-2012 8.1.5.1) will be sent as
- *	802.11 management frames, while TDLS action codes (802.11-2012
- *	8.5.13.1) will be encapsulated and sent as data frames. The currently
- *	supported Public Action code is %WLAN_PUB_ACTION_TDLS_DISCOVER_RES
- *	and the currently supported TDLS actions codes are given in
- *	&enum ieee80211_tdls_actioncode.
- *
- * @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP
- *	(or GO) interface (i.e. hostapd) to ask for unexpected frames to
- *	implement sending deauth to stations that send unexpected class 3
- *	frames. Also used as the event sent by the kernel when such a frame
- *	is received.
- *	For the event, the %NL80211_ATTR_MAC attribute carries the TA and
- *	other attributes like the interface index are present.
- *	If used as the command it must have an interface index and you can
- *	only unsubscribe from the event by closing the socket. Subscription
- *	is also for %NL80211_CMD_UNEXPECTED_4ADDR_FRAME events.
- *
- * @NL80211_CMD_UNEXPECTED_4ADDR_FRAME: Sent as an event indicating that the
- *	associated station identified by %NL80211_ATTR_MAC sent a 4addr frame
- *	and wasn't already in a 4-addr VLAN. The event will be sent similarly
- *	to the %NL80211_CMD_UNEXPECTED_FRAME event, to the same listener.
- *
- * @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface
- *	by sending a null data frame to it and reporting when the frame is
- *	acknowleged. This is used to allow timing out inactive clients. Uses
- *	%NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a
- *	direct reply with an %NL80211_ATTR_COOKIE that is later used to match
- *	up the event with the request. The event includes the same data and
- *	has %NL80211_ATTR_ACK set if the frame was ACKed.
- *
- * @NL80211_CMD_REGISTER_BEACONS: Register this socket to receive beacons from
- *	other BSSes when any interfaces are in AP mode. This helps implement
- *	OLBC handling in hostapd. Beacons are reported in %NL80211_CMD_FRAME
- *	messages. Note that per PHY only one application may register.
- *
- * @NL80211_CMD_SET_NOACK_MAP: sets a bitmap for the individual TIDs whether
- *      No Acknowledgement Policy should be applied.
- *
- * @NL80211_CMD_CH_SWITCH_NOTIFY: An AP or GO may decide to switch channels
- *	independently of the userspace SME, send this event indicating
- *	%NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ and the
- *	attributes determining channel width.  This indication may also be
- *	sent when a remotely-initiated switch (e.g., when a STA receives a CSA
- *	from the remote AP) is completed;
- *
- * @NL80211_CMD_CH_SWITCH_STARTED_NOTIFY: Notify that a channel switch
- *	has been started on an interface, regardless of the initiator
- *	(ie. whether it was requested from a remote device or
- *	initiated on our own).  It indicates that
- *	%NL80211_ATTR_IFINDEX will be on %NL80211_ATTR_WIPHY_FREQ
- *	after %NL80211_ATTR_CH_SWITCH_COUNT TBTT's.  The userspace may
- *	decide to react to this indication by requesting other
- *	interfaces to change channel as well.
- *
- * @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by
- *	its %NL80211_ATTR_WDEV identifier. It must have been created with
- *	%NL80211_CMD_NEW_INTERFACE previously. After it has been started, the
- *	P2P Device can be used for P2P operations, e.g. remain-on-channel and
- *	public action frame TX.
- * @NL80211_CMD_STOP_P2P_DEVICE: Stop the given P2P Device, identified by
- *	its %NL80211_ATTR_WDEV identifier.
- *
- * @NL80211_CMD_CONN_FAILED: connection request to an AP failed; used to
- *	notify userspace that AP has rejected the connection request from a
- *	station, due to particular reason. %NL80211_ATTR_CONN_FAILED_REASON
- *	is used for this.
- *
- * @NL80211_CMD_SET_MCAST_RATE: Change the rate used to send multicast frames
- *	for IBSS or MESH vif.
- *
- * @NL80211_CMD_SET_MAC_ACL: sets ACL for MAC address based access control.
- *	This is to be used with the drivers advertising the support of MAC
- *	address based access control. List of MAC addresses is passed in
- *	%NL80211_ATTR_MAC_ADDRS and ACL policy is passed in
- *	%NL80211_ATTR_ACL_POLICY. Driver will enable ACL with this list, if it
- *	is not already done. The new list will replace any existing list. Driver
- *	will clear its ACL when the list of MAC addresses passed is empty. This
- *	command is used in AP/P2P GO mode. Driver has to make sure to clear its
- *	ACL list during %NL80211_CMD_STOP_AP.
- *
- * @NL80211_CMD_RADAR_DETECT: Start a Channel availability check (CAC). Once
- *	a radar is detected or the channel availability scan (CAC) has finished
- *	or was aborted, or a radar was detected, usermode will be notified with
- *	this event. This command is also used to notify userspace about radars
- *	while operating on this channel.
- *	%NL80211_ATTR_RADAR_EVENT is used to inform about the type of the
- *	event.
- *
- * @NL80211_CMD_GET_PROTOCOL_FEATURES: Get global nl80211 protocol features,
- *	i.e. features for the nl80211 protocol rather than device features.
- *	Returns the features in the %NL80211_ATTR_PROTOCOL_FEATURES bitmap.
- *
- * @NL80211_CMD_UPDATE_FT_IES: Pass down the most up-to-date Fast Transition
- *	Information Element to the WLAN driver
- *
- * @NL80211_CMD_FT_EVENT: Send a Fast transition event from the WLAN driver
- *	to the supplicant. This will carry the target AP's MAC address along
- *	with the relevant Information Elements. This event is used to report
- *	received FT IEs (MDIE, FTIE, RSN IE, TIE, RICIE).
- *
- * @NL80211_CMD_CRIT_PROTOCOL_START: Indicates user-space will start running
- *	a critical protocol that needs more reliability in the connection to
- *	complete.
- *
- * @NL80211_CMD_CRIT_PROTOCOL_STOP: Indicates the connection reliability can
- *	return back to normal.
- *
- * @NL80211_CMD_GET_COALESCE: Get currently supported coalesce rules.
- * @NL80211_CMD_SET_COALESCE: Configure coalesce rules or clear existing rules.
- *
- * @NL80211_CMD_CHANNEL_SWITCH: Perform a channel switch by announcing the
- *	the new channel information (Channel Switch Announcement - CSA)
- *	in the beacon for some time (as defined in the
- *	%NL80211_ATTR_CH_SWITCH_COUNT parameter) and then change to the
- *	new channel. Userspace provides the new channel information (using
- *	%NL80211_ATTR_WIPHY_FREQ and the attributes determining channel
- *	width). %NL80211_ATTR_CH_SWITCH_BLOCK_TX may be supplied to inform
- *	other station that transmission must be blocked until the channel
- *	switch is complete.
- *
- * @NL80211_CMD_VENDOR: Vendor-specified command/event. The command is specified
- *	by the %NL80211_ATTR_VENDOR_ID attribute and a sub-command in
- *	%NL80211_ATTR_VENDOR_SUBCMD. Parameter(s) can be transported in
- *	%NL80211_ATTR_VENDOR_DATA.
- *	For feature advertisement, the %NL80211_ATTR_VENDOR_DATA attribute is
- *	used in the wiphy data as a nested attribute containing descriptions
- *	(&struct nl80211_vendor_cmd_info) of the supported vendor commands.
- *	This may also be sent as an event with the same attributes.
- *
- * @NL80211_CMD_SET_QOS_MAP: Set Interworking QoS mapping for IP DSCP values.
- *	The QoS mapping information is included in %NL80211_ATTR_QOS_MAP. If
- *	that attribute is not included, QoS mapping is disabled. Since this
- *	QoS mapping is relevant for IP packets, it is only valid during an
- *	association. This is cleared on disassociation and AP restart.
- *
- * @NL80211_CMD_ADD_TX_TS: Ask the kernel to add a traffic stream for the given
- *	%NL80211_ATTR_TSID and %NL80211_ATTR_MAC with %NL80211_ATTR_USER_PRIO
- *	and %NL80211_ATTR_ADMITTED_TIME parameters.
- *	Note that the action frame handshake with the AP shall be handled by
- *	userspace via the normal management RX/TX framework, this only sets
- *	up the TX TS in the driver/device.
- *	If the admitted time attribute is not added then the request just checks
- *	if a subsequent setup could be successful, the intent is to use this to
- *	avoid setting up a session with the AP when local restrictions would
- *	make that impossible. However, the subsequent "real" setup may still
- *	fail even if the check was successful.
- * @NL80211_CMD_DEL_TX_TS: Remove an existing TS with the %NL80211_ATTR_TSID
- *	and %NL80211_ATTR_MAC parameters. It isn't necessary to call this
- *	before removing a station entry entirely, or before disassociating
- *	or similar, cleanup will happen in the driver/device in this case.
- *
- * @NL80211_CMD_GET_MPP: Get mesh path attributes for mesh proxy path to
- *	destination %NL80211_ATTR_MAC on the interface identified by
- *	%NL80211_ATTR_IFINDEX.
- *
- * @NL80211_CMD_JOIN_OCB: Join the OCB network. The center frequency and
- *	bandwidth of a channel must be given.
- * @NL80211_CMD_LEAVE_OCB: Leave the OCB network -- no special arguments, the
- *	network is determined by the network interface.
- *
- * @NL80211_CMD_TDLS_CHANNEL_SWITCH: Start channel-switching with a TDLS peer,
- *	identified by the %NL80211_ATTR_MAC parameter. A target channel is
- *	provided via %NL80211_ATTR_WIPHY_FREQ and other attributes determining
- *	channel width/type. The target operating class is given via
- *	%NL80211_ATTR_OPER_CLASS.
- *	The driver is responsible for continually initiating channel-switching
- *	operations and returning to the base channel for communication with the
- *	AP.
- * @NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH: Stop channel-switching with a TDLS
- *	peer given by %NL80211_ATTR_MAC. Both peers must be on the base channel
- *	when this command completes.
- *
- * @NL80211_CMD_WIPHY_REG_CHANGE: Similar to %NL80211_CMD_REG_CHANGE, but used
- *	as an event to indicate changes for devices with wiphy-specific regdom
- *	management.
- *
- * @NL80211_CMD_ABORT_SCAN: Stop an ongoing scan. Returns -ENOENT if a scan is
- *	not running. The driver indicates the status of the scan through
- *	cfg80211_scan_done().
- *
- * @NL80211_CMD_START_NAN: Start NAN operation, identified by its
- *	%NL80211_ATTR_WDEV interface. This interface must have been
- *	previously created with %NL80211_CMD_NEW_INTERFACE. After it
- *	has been started, the NAN interface will create or join a
- *	cluster. This command must have a valid
- *	%NL80211_ATTR_NAN_MASTER_PREF attribute and optional
- *	%NL80211_ATTR_BANDS attributes.  If %NL80211_ATTR_BANDS is
- *	omitted or set to 0, it means don't-care and the device will
- *	decide what to use.  After this command NAN functions can be
- *	added.
- * @NL80211_CMD_STOP_NAN: Stop the NAN operation, identified by
- *	its %NL80211_ATTR_WDEV interface.
- * @NL80211_CMD_ADD_NAN_FUNCTION: Add a NAN function. The function is defined
- *	with %NL80211_ATTR_NAN_FUNC nested attribute. When called, this
- *	operation returns the strictly positive and unique instance id
- *	(%NL80211_ATTR_NAN_FUNC_INST_ID) and a cookie (%NL80211_ATTR_COOKIE)
- *	of the function upon success.
- *	Since instance ID's can be re-used, this cookie is the right
- *	way to identify the function. This will avoid races when a termination
- *	event is handled by the user space after it has already added a new
- *	function that got the same instance id from the kernel as the one
- *	which just terminated.
- *	This cookie may be used in NAN events even before the command
- *	returns, so userspace shouldn't process NAN events until it processes
- *	the response to this command.
- *	Look at %NL80211_ATTR_SOCKET_OWNER as well.
- * @NL80211_CMD_DEL_NAN_FUNCTION: Delete a NAN function by cookie.
- *	This command is also used as a notification sent when a NAN function is
- *	terminated. This will contain a %NL80211_ATTR_NAN_FUNC_INST_ID
- *	and %NL80211_ATTR_COOKIE attributes.
- * @NL80211_CMD_CHANGE_NAN_CONFIG: Change current NAN
- *	configuration. NAN must be operational (%NL80211_CMD_START_NAN
- *	was executed).  It must contain at least one of the following
- *	attributes: %NL80211_ATTR_NAN_MASTER_PREF,
- *	%NL80211_ATTR_BANDS.  If %NL80211_ATTR_BANDS is omitted, the
- *	current configuration is not changed.  If it is present but
- *	set to zero, the configuration is changed to don't-care
- *	(i.e. the device can decide what to do).
- * @NL80211_CMD_NAN_FUNC_MATCH: Notification sent when a match is reported.
- *	This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and
- *	%NL80211_ATTR_COOKIE.
- *
- * @NL80211_CMD_UPDATE_CONNECT_PARAMS: Update one or more connect parameters
- *	for subsequent roaming cases if the driver or firmware uses internal
- *	BSS selection. This command can be issued only while connected and it
- *	does not result in a change for the current association. Currently,
- *	only the %NL80211_ATTR_IE data is used and updated with this command.
- *
- * @NL80211_CMD_SET_PMK: For offloaded 4-Way handshake, set the PMK or PMK-R0
- *	for the given authenticator address (specified with %NL80211_ATTR_MAC).
- *	When %NL80211_ATTR_PMKR0_NAME is set, %NL80211_ATTR_PMK specifies the
- *	PMK-R0, otherwise it specifies the PMK.
- * @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously
- *	configured PMK for the authenticator address identified by
- *	%NL80211_ATTR_MAC.
- * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates that the 4 way
- *	handshake was completed successfully by the driver. The BSSID is
- *	specified with %NL80211_ATTR_MAC. Drivers that support 4 way handshake
- *	offload should send this event after indicating 802.11 association with
- *	%NL80211_CMD_CONNECT or %NL80211_CMD_ROAM. If the 4 way handshake failed
- *	%NL80211_CMD_DISCONNECT should be indicated instead.
- *
- * @NL80211_CMD_CONTROL_PORT_FRAME: Control Port (e.g. PAE) frame TX request
- *	and RX notification.  This command is used both as a request to transmit
- *	a control port frame and as a notification that a control port frame
- *	has been received. %NL80211_ATTR_FRAME is used to specify the
- *	frame contents.  The frame is the raw EAPoL data, without ethernet or
- *	802.11 headers.
- *	When used as an event indication %NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
- *	%NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT and %NL80211_ATTR_MAC are added
- *	indicating the protocol type of the received frame; whether the frame
- *	was received unencrypted and the MAC address of the peer respectively.
- *
- * @NL80211_CMD_RELOAD_REGDB: Request that the regdb firmware file is reloaded.
- *
- * @NL80211_CMD_EXTERNAL_AUTH: This interface is exclusively defined for host
- *	drivers that do not define separate commands for authentication and
- *	association, but rely on user space for the authentication to happen.
- *	This interface acts both as the event request (driver to user space)
- *	to trigger the authentication and command response (userspace to
- *	driver) to indicate the authentication status.
- *
- *	User space uses the %NL80211_CMD_CONNECT command to the host driver to
- *	trigger a connection. The host driver selects a BSS and further uses
- *	this interface to offload only the authentication part to the user
- *	space. Authentication frames are passed between the driver and user
- *	space through the %NL80211_CMD_FRAME interface. Host driver proceeds
- *	further with the association after getting successful authentication
- *	status. User space indicates the authentication status through
- *	%NL80211_ATTR_STATUS_CODE attribute in %NL80211_CMD_EXTERNAL_AUTH
- *	command interface.
- *
- *	Host driver reports this status on an authentication failure to the
- *	user space through the connect result as the user space would have
- *	initiated the connection through the connect request.
- *
- * @NL80211_CMD_STA_OPMODE_CHANGED: An event that notify station's
- *	ht opmode or vht opmode changes using any of %NL80211_ATTR_SMPS_MODE,
- *	%NL80211_ATTR_CHANNEL_WIDTH,%NL80211_ATTR_NSS attributes with its
- *	address(specified in %NL80211_ATTR_MAC).
- *
- * @NL80211_CMD_GET_FTM_RESPONDER_STATS: Retrieve FTM responder statistics, in
- *	the %NL80211_ATTR_FTM_RESPONDER_STATS attribute.
- *
- * @NL80211_CMD_PEER_MEASUREMENT_START: start a (set of) peer measurement(s)
- *	with the given parameters, which are encapsulated in the nested
- *	%NL80211_ATTR_PEER_MEASUREMENTS attribute. Optionally, MAC address
- *	randomization may be enabled and configured by specifying the
- *	%NL80211_ATTR_MAC and %NL80211_ATTR_MAC_MASK attributes.
- *	If a timeout is requested, use the %NL80211_ATTR_TIMEOUT attribute.
- *	A u64 cookie for further %NL80211_ATTR_COOKIE use is is returned in
- *	the netlink extended ack message.
- *
- *	To cancel a measurement, close the socket that requested it.
- *
- *	Measurement results are reported to the socket that requested the
- *	measurement using @NL80211_CMD_PEER_MEASUREMENT_RESULT when they
- *	become available, so applications must ensure a large enough socket
- *	buffer size.
- *
- *	Depending on driver support it may or may not be possible to start
- *	multiple concurrent measurements.
- * @NL80211_CMD_PEER_MEASUREMENT_RESULT: This command number is used for the
- *	result notification from the driver to the requesting socket.
- * @NL80211_CMD_PEER_MEASUREMENT_COMPLETE: Notification only, indicating that
- *	the measurement completed, using the measurement cookie
- *	(%NL80211_ATTR_COOKIE).
- *
- * @NL80211_CMD_NOTIFY_RADAR: Notify the kernel that a radar signal was
- *	detected and reported by a neighboring device on the channel
- *	indicated by %NL80211_ATTR_WIPHY_FREQ and other attributes
- *	determining the width and type.
- *
- * @NL80211_CMD_UPDATE_OWE_INFO: This interface allows the host driver to
- *	offload OWE processing to user space. This intends to support
- *	OWE AKM by the host drivers that implement SME but rely
- *	on the user space for the cryptographic/DH IE processing in AP mode.
- *
- * @NL80211_CMD_PROBE_MESH_LINK: The requirement for mesh link metric
- *	refreshing, is that from one mesh point we be able to send some data
- *	frames to other mesh points which are not currently selected as a
- *	primary traffic path, but which are only 1 hop away. The absence of
- *	the primary path to the chosen node makes it necessary to apply some
- *	form of marking on a chosen packet stream so that the packets can be
- *	properly steered to the selected node for testing, and not by the
- *	regular mesh path lookup. Further, the packets must be of type data
- *	so that the rate control (often embedded in firmware) is used for
- *	rate selection.
- *
- *	Here attribute %NL80211_ATTR_MAC is used to specify connected mesh
- *	peer MAC address and %NL80211_ATTR_FRAME is used to specify the frame
- *	content. The frame is ethernet data.
- *
- * @NL80211_CMD_SET_TID_CONFIG: Data frame TID specific configuration
- *	is passed using %NL80211_ATTR_TID_CONFIG attribute.
- *
- * @NL80211_CMD_MAX: highest used command number
- * @__NL80211_CMD_AFTER_LAST: internal use
- */
-enum nl80211_commands {
-/* don't change the order or add anything between, this is ABI! */
-	NL80211_CMD_UNSPEC,
-
-	NL80211_CMD_GET_WIPHY,		/* can dump */
-	NL80211_CMD_SET_WIPHY,
-	NL80211_CMD_NEW_WIPHY,
-	NL80211_CMD_DEL_WIPHY,
-
-	NL80211_CMD_GET_INTERFACE,	/* can dump */
-	NL80211_CMD_SET_INTERFACE,
-	NL80211_CMD_NEW_INTERFACE,
-	NL80211_CMD_DEL_INTERFACE,
-
-	NL80211_CMD_GET_KEY,
-	NL80211_CMD_SET_KEY,
-	NL80211_CMD_NEW_KEY,
-	NL80211_CMD_DEL_KEY,
-
-	NL80211_CMD_GET_BEACON,
-	NL80211_CMD_SET_BEACON,
-	NL80211_CMD_START_AP,
-	NL80211_CMD_NEW_BEACON = NL80211_CMD_START_AP,
-	NL80211_CMD_STOP_AP,
-	NL80211_CMD_DEL_BEACON = NL80211_CMD_STOP_AP,
-
-	NL80211_CMD_GET_STATION,
-	NL80211_CMD_SET_STATION,
-	NL80211_CMD_NEW_STATION,
-	NL80211_CMD_DEL_STATION,
-
-	NL80211_CMD_GET_MPATH,
-	NL80211_CMD_SET_MPATH,
-	NL80211_CMD_NEW_MPATH,
-	NL80211_CMD_DEL_MPATH,
-
-	NL80211_CMD_SET_BSS,
-
-	NL80211_CMD_SET_REG,
-	NL80211_CMD_REQ_SET_REG,
-
-	NL80211_CMD_GET_MESH_CONFIG,
-	NL80211_CMD_SET_MESH_CONFIG,
-
-	NL80211_CMD_SET_MGMT_EXTRA_IE /* reserved; not used */,
-
-	NL80211_CMD_GET_REG,
-
-	NL80211_CMD_GET_SCAN,
-	NL80211_CMD_TRIGGER_SCAN,
-	NL80211_CMD_NEW_SCAN_RESULTS,
-	NL80211_CMD_SCAN_ABORTED,
-
-	NL80211_CMD_REG_CHANGE,
-
-	NL80211_CMD_AUTHENTICATE,
-	NL80211_CMD_ASSOCIATE,
-	NL80211_CMD_DEAUTHENTICATE,
-	NL80211_CMD_DISASSOCIATE,
-
-	NL80211_CMD_MICHAEL_MIC_FAILURE,
-
-	NL80211_CMD_REG_BEACON_HINT,
-
-	NL80211_CMD_JOIN_IBSS,
-	NL80211_CMD_LEAVE_IBSS,
-
-	NL80211_CMD_TESTMODE,
-
-	NL80211_CMD_CONNECT,
-	NL80211_CMD_ROAM,
-	NL80211_CMD_DISCONNECT,
-
-	NL80211_CMD_SET_WIPHY_NETNS,
-
-	NL80211_CMD_GET_SURVEY,
-	NL80211_CMD_NEW_SURVEY_RESULTS,
-
-	NL80211_CMD_SET_PMKSA,
-	NL80211_CMD_DEL_PMKSA,
-	NL80211_CMD_FLUSH_PMKSA,
-
-	NL80211_CMD_REMAIN_ON_CHANNEL,
-	NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL,
-
-	NL80211_CMD_SET_TX_BITRATE_MASK,
-
-	NL80211_CMD_REGISTER_FRAME,
-	NL80211_CMD_REGISTER_ACTION = NL80211_CMD_REGISTER_FRAME,
-	NL80211_CMD_FRAME,
-	NL80211_CMD_ACTION = NL80211_CMD_FRAME,
-	NL80211_CMD_FRAME_TX_STATUS,
-	NL80211_CMD_ACTION_TX_STATUS = NL80211_CMD_FRAME_TX_STATUS,
-
-	NL80211_CMD_SET_POWER_SAVE,
-	NL80211_CMD_GET_POWER_SAVE,
-
-	NL80211_CMD_SET_CQM,
-	NL80211_CMD_NOTIFY_CQM,
-
-	NL80211_CMD_SET_CHANNEL,
-	NL80211_CMD_SET_WDS_PEER,
-
-	NL80211_CMD_FRAME_WAIT_CANCEL,
-
-	NL80211_CMD_JOIN_MESH,
-	NL80211_CMD_LEAVE_MESH,
-
-	NL80211_CMD_UNPROT_DEAUTHENTICATE,
-	NL80211_CMD_UNPROT_DISASSOCIATE,
-
-	NL80211_CMD_NEW_PEER_CANDIDATE,
-
-	NL80211_CMD_GET_WOWLAN,
-	NL80211_CMD_SET_WOWLAN,
-
-	NL80211_CMD_START_SCHED_SCAN,
-	NL80211_CMD_STOP_SCHED_SCAN,
-	NL80211_CMD_SCHED_SCAN_RESULTS,
-	NL80211_CMD_SCHED_SCAN_STOPPED,
-
-	NL80211_CMD_SET_REKEY_OFFLOAD,
-
-	NL80211_CMD_PMKSA_CANDIDATE,
-
-	NL80211_CMD_TDLS_OPER,
-	NL80211_CMD_TDLS_MGMT,
-
-	NL80211_CMD_UNEXPECTED_FRAME,
-
-	NL80211_CMD_PROBE_CLIENT,
-
-	NL80211_CMD_REGISTER_BEACONS,
-
-	NL80211_CMD_UNEXPECTED_4ADDR_FRAME,
-
-	NL80211_CMD_SET_NOACK_MAP,
-
-	NL80211_CMD_CH_SWITCH_NOTIFY,
-
-	NL80211_CMD_START_P2P_DEVICE,
-	NL80211_CMD_STOP_P2P_DEVICE,
-
-	NL80211_CMD_CONN_FAILED,
-
-	NL80211_CMD_SET_MCAST_RATE,
-
-	NL80211_CMD_SET_MAC_ACL,
-
-	NL80211_CMD_RADAR_DETECT,
-
-	NL80211_CMD_GET_PROTOCOL_FEATURES,
-
-	NL80211_CMD_UPDATE_FT_IES,
-	NL80211_CMD_FT_EVENT,
-
-	NL80211_CMD_CRIT_PROTOCOL_START,
-	NL80211_CMD_CRIT_PROTOCOL_STOP,
-
-	NL80211_CMD_GET_COALESCE,
-	NL80211_CMD_SET_COALESCE,
-
-	NL80211_CMD_CHANNEL_SWITCH,
-
-	NL80211_CMD_VENDOR,
-
-	NL80211_CMD_SET_QOS_MAP,
-
-	NL80211_CMD_ADD_TX_TS,
-	NL80211_CMD_DEL_TX_TS,
-
-	NL80211_CMD_GET_MPP,
-
-	NL80211_CMD_JOIN_OCB,
-	NL80211_CMD_LEAVE_OCB,
-
-	NL80211_CMD_CH_SWITCH_STARTED_NOTIFY,
-
-	NL80211_CMD_TDLS_CHANNEL_SWITCH,
-	NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH,
-
-	NL80211_CMD_WIPHY_REG_CHANGE,
-
-	NL80211_CMD_ABORT_SCAN,
-
-	NL80211_CMD_START_NAN,
-	NL80211_CMD_STOP_NAN,
-	NL80211_CMD_ADD_NAN_FUNCTION,
-	NL80211_CMD_DEL_NAN_FUNCTION,
-	NL80211_CMD_CHANGE_NAN_CONFIG,
-	NL80211_CMD_NAN_MATCH,
-
-	NL80211_CMD_SET_MULTICAST_TO_UNICAST,
-
-	NL80211_CMD_UPDATE_CONNECT_PARAMS,
-
-	NL80211_CMD_SET_PMK,
-	NL80211_CMD_DEL_PMK,
-
-	NL80211_CMD_PORT_AUTHORIZED,
-
-	NL80211_CMD_RELOAD_REGDB,
-
-	NL80211_CMD_EXTERNAL_AUTH,
-
-	NL80211_CMD_STA_OPMODE_CHANGED,
-
-	NL80211_CMD_CONTROL_PORT_FRAME,
-
-	NL80211_CMD_GET_FTM_RESPONDER_STATS,
-
-	NL80211_CMD_PEER_MEASUREMENT_START,
-	NL80211_CMD_PEER_MEASUREMENT_RESULT,
-	NL80211_CMD_PEER_MEASUREMENT_COMPLETE,
-
-	NL80211_CMD_NOTIFY_RADAR,
-
-	NL80211_CMD_UPDATE_OWE_INFO,
-
-	NL80211_CMD_PROBE_MESH_LINK,
-
-	NL80211_CMD_SET_TID_CONFIG,
-
-	/* add new commands above here */
-
-	/* used to define NL80211_CMD_MAX below */
-	__NL80211_CMD_AFTER_LAST,
-	NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1
-};
-
-/*
- * Allow user space programs to use #ifdef on new commands by defining them
- * here
- */
-#define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS
-#define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE
-#define NL80211_CMD_REG_CHANGE NL80211_CMD_REG_CHANGE
-#define NL80211_CMD_AUTHENTICATE NL80211_CMD_AUTHENTICATE
-#define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE
-#define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE
-#define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE
-#define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT
-
-#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS
-
-/* source-level API compatibility */
-#define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG
-#define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG
-#define NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE NL80211_MESH_SETUP_IE
-
-/**
- * enum nl80211_attrs - nl80211 netlink attributes
- *
- * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors
- *
- * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf.
- *	/sys/class/ieee80211/<phyname>/index
- * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming)
- * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters
- * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz,
- *	defines the channel together with the (deprecated)
- *	%NL80211_ATTR_WIPHY_CHANNEL_TYPE attribute or the attributes
- *	%NL80211_ATTR_CHANNEL_WIDTH and if needed %NL80211_ATTR_CENTER_FREQ1
- *	and %NL80211_ATTR_CENTER_FREQ2
- * @NL80211_ATTR_CHANNEL_WIDTH: u32 attribute containing one of the values
- *	of &enum nl80211_chan_width, describing the channel width. See the
- *	documentation of the enum for more information.
- * @NL80211_ATTR_CENTER_FREQ1: Center frequency of the first part of the
- *	channel, used for anything but 20 MHz bandwidth
- * @NL80211_ATTR_CENTER_FREQ2: Center frequency of the second part of the
- *	channel, used only for 80+80 MHz bandwidth
- * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ
- *	if HT20 or HT40 are to be used (i.e., HT disabled if not included):
- *	NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including
- *		this attribute)
- *	NL80211_CHAN_HT20 = HT20 only
- *	NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel
- *	NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel
- *	This attribute is now deprecated.
- * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is
- *	less than or equal to the RTS threshold; allowed range: 1..255;
- *	dot11ShortRetryLimit; u8
- * @NL80211_ATTR_WIPHY_RETRY_LONG: TX retry limit for frames whose length is
- *	greater than the RTS threshold; allowed range: 1..255;
- *	dot11ShortLongLimit; u8
- * @NL80211_ATTR_WIPHY_FRAG_THRESHOLD: fragmentation threshold, i.e., maximum
- *	length in octets for frames; allowed range: 256..8000, disable
- *	fragmentation with (u32)-1; dot11FragmentationThreshold; u32
- * @NL80211_ATTR_WIPHY_RTS_THRESHOLD: RTS threshold (TX frames with length
- *	larger than or equal to this use RTS/CTS handshake); allowed range:
- *	0..65536, disable with (u32)-1; dot11RTSThreshold; u32
- * @NL80211_ATTR_WIPHY_COVERAGE_CLASS: Coverage Class as defined by IEEE 802.11
- *	section 7.3.2.9; dot11CoverageClass; u8
- *
- * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on
- * @NL80211_ATTR_IFNAME: network interface name
- * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype
- *
- * @NL80211_ATTR_WDEV: wireless device identifier, used for pseudo-devices
- *	that don't have a netdev (u64)
- *
- * @NL80211_ATTR_MAC: MAC address (various uses)
- *
- * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of
- *	16 bytes encryption key followed by 8 bytes each for TX and RX MIC
- *	keys
- * @NL80211_ATTR_KEY_IDX: key ID (u8, 0-3)
- * @NL80211_ATTR_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11
- *	section 7.3.2.25.1, e.g. 0x000FAC04)
- * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
- *	CCMP keys, each six bytes in little endian
- * @NL80211_ATTR_KEY_DEFAULT: Flag attribute indicating the key is default key
- * @NL80211_ATTR_KEY_DEFAULT_MGMT: Flag attribute indicating the key is the
- *	default management key
- * @NL80211_ATTR_CIPHER_SUITES_PAIRWISE: For crypto settings for connect or
- *	other commands, indicates which pairwise cipher suites are used
- * @NL80211_ATTR_CIPHER_SUITE_GROUP: For crypto settings for connect or
- *	other commands, indicates which group cipher suite is used
- *
- * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU
- * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing
- * @NL80211_ATTR_BEACON_HEAD: portion of the beacon before the TIM IE
- * @NL80211_ATTR_BEACON_TAIL: portion of the beacon after the TIM IE
- *
- * @NL80211_ATTR_STA_AID: Association ID for the station (u16)
- * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of
- *	&enum nl80211_sta_flags (deprecated, use %NL80211_ATTR_STA_FLAGS2)
- * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by
- *	IEEE 802.11 7.3.1.6 (u16).
- * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported
- *	rates as defined by IEEE 802.11 7.3.2.2 but without the length
- *	restriction (at most %NL80211_MAX_SUPP_RATES).
- * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station
- *	to, or the AP interface the station was originally added to to.
- * @NL80211_ATTR_STA_INFO: information about a station, part of station info
- *	given for %NL80211_CMD_GET_STATION, nested attribute containing
- *	info as possible, see &enum nl80211_sta_info.
- *
- * @NL80211_ATTR_WIPHY_BANDS: Information about an operating bands,
- *	consisting of a nested array.
- *
- * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes).
- * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link
- *	(see &enum nl80211_plink_action).
- * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path.
- * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path
- * 	info given for %NL80211_CMD_GET_MPATH, nested attribute described at
- *	&enum nl80211_mpath_info.
- *
- * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of
- *      &enum nl80211_mntr_flags.
- *
- * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the
- * 	current regulatory domain should be set to or is already set to.
- * 	For example, 'CR', for Costa Rica. This attribute is used by the kernel
- * 	to query the CRDA to retrieve one regulatory domain. This attribute can
- * 	also be used by userspace to query the kernel for the currently set
- * 	regulatory domain. We chose an alpha2 as that is also used by the
- * 	IEEE-802.11 country information element to identify a country.
- * 	Users can also simply ask the wireless core to set regulatory domain
- * 	to a specific alpha2.
- * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory
- *	rules.
- *
- * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1)
- * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled
- *	(u8, 0 or 1)
- * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled
- *	(u8, 0 or 1)
- * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic
- *	rates in format defined by IEEE 802.11 7.3.2.2 but without the length
- *	restriction (at most %NL80211_MAX_SUPP_RATES).
- *
- * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from
- *	association request when used with NL80211_CMD_NEW_STATION)
- *
- * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all
- *	supported interface types, each a flag attribute with the number
- *	of the interface mode.
- *
- * @NL80211_ATTR_MGMT_SUBTYPE: Management frame subtype for
- *	%NL80211_CMD_SET_MGMT_EXTRA_IE.
- *
- * @NL80211_ATTR_IE: Information element(s) data (used, e.g., with
- *	%NL80211_CMD_SET_MGMT_EXTRA_IE).
- *
- * @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with
- *	a single scan request, a wiphy attribute.
- * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS: number of SSIDs you can
- *	scan with a single scheduled scan request, a wiphy attribute.
- * @NL80211_ATTR_MAX_SCAN_IE_LEN: maximum length of information elements
- *	that can be added to a scan request
- * @NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN: maximum length of information
- *	elements that can be added to a scheduled scan request
- * @NL80211_ATTR_MAX_MATCH_SETS: maximum number of sets that can be
- *	used with @NL80211_ATTR_SCHED_SCAN_MATCH, a wiphy attribute.
- *
- * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz)
- * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive
- *	scanning and include a zero-length SSID (wildcard) for wildcard scan
- * @NL80211_ATTR_BSS: scan result BSS
- *
- * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain
- * 	currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_*
- * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently
- * 	set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*)
- *
- * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies
- *	an array of command numbers (i.e. a mapping index to command number)
- *	that the driver for the given wiphy supports.
- *
- * @NL80211_ATTR_FRAME: frame data (binary attribute), including frame header
- *	and body, but not FCS; used, e.g., with NL80211_CMD_AUTHENTICATE and
- *	NL80211_CMD_ASSOCIATE events
- * @NL80211_ATTR_SSID: SSID (binary attribute, 0..32 octets)
- * @NL80211_ATTR_AUTH_TYPE: AuthenticationType, see &enum nl80211_auth_type,
- *	represented as a u32
- * @NL80211_ATTR_REASON_CODE: ReasonCode for %NL80211_CMD_DEAUTHENTICATE and
- *	%NL80211_CMD_DISASSOCIATE, u16
- *
- * @NL80211_ATTR_KEY_TYPE: Key Type, see &enum nl80211_key_type, represented as
- *	a u32
- *
- * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change
- * 	due to considerations from a beacon hint. This attribute reflects
- * 	the state of the channel _before_ the beacon hint processing. This
- * 	attributes consists of a nested attribute containing
- * 	NL80211_FREQUENCY_ATTR_*
- * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change
- * 	due to considerations from a beacon hint. This attribute reflects
- * 	the state of the channel _after_ the beacon hint processing. This
- * 	attributes consists of a nested attribute containing
- * 	NL80211_FREQUENCY_ATTR_*
- *
- * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported
- *	cipher suites
- *
- * @NL80211_ATTR_FREQ_FIXED: a flag indicating the IBSS should not try to look
- *	for other networks on different channels
- *
- * @NL80211_ATTR_TIMED_OUT: a flag indicating than an operation timed out; this
- *	is used, e.g., with %NL80211_CMD_AUTHENTICATE event
- *
- * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is
- *	used for the association (&enum nl80211_mfp, represented as a u32);
- *	this attribute can be used with %NL80211_CMD_ASSOCIATE and
- *	%NL80211_CMD_CONNECT requests. %NL80211_MFP_OPTIONAL is not allowed for
- *	%NL80211_CMD_ASSOCIATE since user space SME is expected and hence, it
- *	must have decided whether to use management frame protection or not.
- *	Setting %NL80211_MFP_OPTIONAL with a %NL80211_CMD_CONNECT request will
- *	let the driver (or the firmware) decide whether to use MFP or not.
- *
- * @NL80211_ATTR_STA_FLAGS2: Attribute containing a
- *	&struct nl80211_sta_flag_update.
- *
- * @NL80211_ATTR_CONTROL_PORT: A flag indicating whether user space controls
- *	IEEE 802.1X port, i.e., sets/clears %NL80211_STA_FLAG_AUTHORIZED, in
- *	station mode. If the flag is included in %NL80211_CMD_ASSOCIATE
- *	request, the driver will assume that the port is unauthorized until
- *	authorized by user space. Otherwise, port is marked authorized by
- *	default in station mode.
- * @NL80211_ATTR_CONTROL_PORT_ETHERTYPE: A 16-bit value indicating the
- *	ethertype that will be used for key negotiation. It can be
- *	specified with the associate and connect commands. If it is not
- *	specified, the value defaults to 0x888E (PAE, 802.1X). This
- *	attribute is also used as a flag in the wiphy information to
- *	indicate that protocols other than PAE are supported.
- * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with
- *	%NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom
- *	ethertype frames used for key negotiation must not be encrypted.
- * @NL80211_ATTR_CONTROL_PORT_OVER_NL80211: A flag indicating whether control
- *	port frames (e.g. of type given in %NL80211_ATTR_CONTROL_PORT_ETHERTYPE)
- *	will be sent directly to the network interface or sent via the NL80211
- *	socket.  If this attribute is missing, then legacy behavior of sending
- *	control port frames directly to the network interface is used.  If the
- *	flag is included, then control port frames are sent over NL80211 instead
- *	using %CMD_CONTROL_PORT_FRAME.  If control port routing over NL80211 is
- *	to be used then userspace must also use the %NL80211_ATTR_SOCKET_OWNER
- *	flag. When used with %NL80211_ATTR_CONTROL_PORT_NO_PREAUTH, pre-auth
- *	frames are not forwared over the control port.
- *
- * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
- *	We recommend using nested, driver-specific attributes within this.
- *
- * @NL80211_ATTR_DISCONNECTED_BY_AP: A flag indicating that the DISCONNECT
- *	event was due to the AP disconnecting the station, and not due to
- *	a local disconnect request.
- * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT
- *	event (u16)
- * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating
- *	that protected APs should be used. This is also used with NEW_BEACON to
- *	indicate that the BSS is to use protection.
- *
- * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON
- *	to indicate which unicast key ciphers will be used with the connection
- *	(an array of u32).
- * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
- *	indicate which group key cipher will be used with the connection (a
- *	u32).
- * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
- *	indicate which WPA version(s) the AP we want to associate with is using
- *	(a u32 with flags from &enum nl80211_wpa_versions).
- * @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
- *	indicate which key management algorithm(s) to use (an array of u32).
- *	This attribute is also sent in response to @NL80211_CMD_GET_WIPHY,
- *	indicating the supported AKM suites, intended for specific drivers which
- *	implement SME and have constraints on which AKMs are supported and also
- *	the cases where an AKM support is offloaded to the driver/firmware.
- *	If there is no such notification from the driver, user space should
- *	assume the driver supports all the AKM suites.
- *
- * @NL80211_ATTR_REQ_IE: (Re)association request information elements as
- *	sent out by the card, for ROAM and successful CONNECT events.
- * @NL80211_ATTR_RESP_IE: (Re)association response information elements as
- *	sent by peer, for ROAM and successful CONNECT events.
- *
- * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used in ASSOCIATE and CONNECT
- *	commands to specify a request to reassociate within an ESS, i.e., to use
- *	Reassociate Request frame (with the value of this attribute in the
- *	Current AP address field) instead of Association Request frame which is
- *	used for the initial association to an ESS.
- *
- * @NL80211_ATTR_KEY: key information in a nested attribute with
- *	%NL80211_KEY_* sub-attributes
- * @NL80211_ATTR_KEYS: array of keys for static WEP keys for connect()
- *	and join_ibss(), key information is in a nested attribute each
- *	with %NL80211_KEY_* sub-attributes
- *
- * @NL80211_ATTR_PID: Process ID of a network namespace.
- *
- * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for
- *	dumps. This number increases whenever the object list being
- *	dumped changes, and as such userspace can verify that it has
- *	obtained a complete and consistent snapshot by verifying that
- *	all dump messages contain the same generation number. If it
- *	changed then the list changed and the dump should be repeated
- *	completely from scratch.
- *
- * @NL80211_ATTR_4ADDR: Use 4-address frames on a virtual interface
- *
- * @NL80211_ATTR_SURVEY_INFO: survey information about a channel, part of
- *      the survey response for %NL80211_CMD_GET_SURVEY, nested attribute
- *      containing info as possible, see &enum survey_info.
- *
- * @NL80211_ATTR_PMKID: PMK material for PMKSA caching.
- * @NL80211_ATTR_MAX_NUM_PMKIDS: maximum number of PMKIDs a firmware can
- *	cache, a wiphy attribute.
- *
- * @NL80211_ATTR_DURATION: Duration of an operation in milliseconds, u32.
- * @NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION: Device attribute that
- *	specifies the maximum duration that can be requested with the
- *	remain-on-channel operation, in milliseconds, u32.
- *
- * @NL80211_ATTR_COOKIE: Generic 64-bit cookie to identify objects.
- *
- * @NL80211_ATTR_TX_RATES: Nested set of attributes
- *	(enum nl80211_tx_rate_attributes) describing TX rates per band. The
- *	enum nl80211_band value is used as the index (nla_type() of the nested
- *	data. If a band is not included, it will be configured to allow all
- *	rates based on negotiated supported rates information. This attribute
- *	is used with %NL80211_CMD_SET_TX_BITRATE_MASK and with starting AP,
- *	and joining mesh networks (not IBSS yet). In the later case, it must
- *	specify just a single bitrate, which is to be used for the beacon.
- *	The driver must also specify support for this with the extended
- *	features NL80211_EXT_FEATURE_BEACON_RATE_LEGACY,
- *	NL80211_EXT_FEATURE_BEACON_RATE_HT and
- *	NL80211_EXT_FEATURE_BEACON_RATE_VHT.
- *
- * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain
- *	at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME.
- * @NL80211_ATTR_FRAME_TYPE: A u16 indicating the frame type/subtype for the
- *	@NL80211_CMD_REGISTER_FRAME command.
- * @NL80211_ATTR_TX_FRAME_TYPES: wiphy capability attribute, which is a
- *	nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
- *	information about which frame types can be transmitted with
- *	%NL80211_CMD_FRAME.
- * @NL80211_ATTR_RX_FRAME_TYPES: wiphy capability attribute, which is a
- *	nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
- *	information about which frame types can be registered for RX.
- *
- * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was
- *	acknowledged by the recipient.
- *
- * @NL80211_ATTR_PS_STATE: powersave state, using &enum nl80211_ps_state values.
- *
- * @NL80211_ATTR_CQM: connection quality monitor configuration in a
- *	nested attribute with %NL80211_ATTR_CQM_* sub-attributes.
- *
- * @NL80211_ATTR_LOCAL_STATE_CHANGE: Flag attribute to indicate that a command
- *	is requesting a local authentication/association state change without
- *	invoking actual management frame exchange. This can be used with
- *	NL80211_CMD_AUTHENTICATE, NL80211_CMD_DEAUTHENTICATE,
- *	NL80211_CMD_DISASSOCIATE.
- *
- * @NL80211_ATTR_AP_ISOLATE: (AP mode) Do not forward traffic between stations
- *	connected to this BSS.
- *
- * @NL80211_ATTR_WIPHY_TX_POWER_SETTING: Transmit power setting type. See
- *      &enum nl80211_tx_power_setting for possible values.
- * @NL80211_ATTR_WIPHY_TX_POWER_LEVEL: Transmit power level in signed mBm units.
- *      This is used in association with @NL80211_ATTR_WIPHY_TX_POWER_SETTING
- *      for non-automatic settings.
- *
- * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly
- *	means support for per-station GTKs.
- *
- * @NL80211_ATTR_WIPHY_ANTENNA_TX: Bitmap of allowed antennas for transmitting.
- *	This can be used to mask out antennas which are not attached or should
- *	not be used for transmitting. If an antenna is not selected in this
- *	bitmap the hardware is not allowed to transmit on this antenna.
- *
- *	Each bit represents one antenna, starting with antenna 1 at the first
- *	bit. Depending on which antennas are selected in the bitmap, 802.11n
- *	drivers can derive which chainmasks to use (if all antennas belonging to
- *	a particular chain are disabled this chain should be disabled) and if
- *	a chain has diversity antennas wether diversity should be used or not.
- *	HT capabilities (STBC, TX Beamforming, Antenna selection) can be
- *	derived from the available chains after applying the antenna mask.
- *	Non-802.11n drivers can derive wether to use diversity or not.
- *	Drivers may reject configurations or RX/TX mask combinations they cannot
- *	support by returning -EINVAL.
- *
- * @NL80211_ATTR_WIPHY_ANTENNA_RX: Bitmap of allowed antennas for receiving.
- *	This can be used to mask out antennas which are not attached or should
- *	not be used for receiving. If an antenna is not selected in this bitmap
- *	the hardware should not be configured to receive on this antenna.
- *	For a more detailed description see @NL80211_ATTR_WIPHY_ANTENNA_TX.
- *
- * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX: Bitmap of antennas which are available
- *	for configuration as TX antennas via the above parameters.
- *
- * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX: Bitmap of antennas which are available
- *	for configuration as RX antennas via the above parameters.
- *
- * @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS
- *
- * @NL80211_ATTR_OFFCHANNEL_TX_OK: For management frame TX, the frame may be
- *	transmitted on another channel when the channel given doesn't match
- *	the current channel. If the current channel doesn't match and this
- *	flag isn't set, the frame will be rejected. This is also used as an
- *	nl80211 capability flag.
- *
- * @NL80211_ATTR_BSS_HT_OPMODE: HT operation mode (u16)
- *
- * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags
- *	attributes, specifying what a key should be set as default as.
- *	See &enum nl80211_key_default_types.
- *
- * @NL80211_ATTR_MESH_SETUP: Optional mesh setup parameters.  These cannot be
- *	changed once the mesh is active.
- * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute
- *	containing attributes from &enum nl80211_meshconf_params.
- * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver
- *	allows auth frames in a mesh to be passed to userspace for processing via
- *	the @NL80211_MESH_SETUP_USERSPACE_AUTH flag.
- * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as defined in
- *	&enum nl80211_plink_state. Used when userspace is driving the peer link
- *	management state machine.  @NL80211_MESH_SETUP_USERSPACE_AMPE or
- *	@NL80211_MESH_SETUP_USERSPACE_MPM must be enabled.
- *
- * @NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED: indicates, as part of the wiphy
- *	capabilities, the supported WoWLAN triggers
- * @NL80211_ATTR_WOWLAN_TRIGGERS: used by %NL80211_CMD_SET_WOWLAN to
- *	indicate which WoW triggers should be enabled. This is also
- *	used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN
- *	triggers.
- *
- * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan
- *	cycles, in msecs.
- *
- * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more
- *	sets of attributes to match during scheduled scans.  Only BSSs
- *	that match any of the sets will be reported.  These are
- *	pass-thru filter rules.
- *	For a match to succeed, the BSS must match all attributes of a
- *	set.  Since not every hardware supports matching all types of
- *	attributes, there is no guarantee that the reported BSSs are
- *	fully complying with the match sets and userspace needs to be
- *	able to ignore them by itself.
- *	Thus, the implementation is somewhat hardware-dependent, but
- *	this is only an optimization and the userspace application
- *	needs to handle all the non-filtered results anyway.
- *	If the match attributes don't make sense when combined with
- *	the values passed in @NL80211_ATTR_SCAN_SSIDS (eg. if an SSID
- *	is included in the probe request, but the match attributes
- *	will never let it go through), -EINVAL may be returned.
- *	If omitted, no filtering is done.
- *
- * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported
- *	interface combinations. In each nested item, it contains attributes
- *	defined in &enum nl80211_if_combination_attrs.
- * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like
- *	%NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that
- *	are managed in software: interfaces of these types aren't subject to
- *	any restrictions in their number or combinations.
- *
- * @NL80211_ATTR_REKEY_DATA: nested attribute containing the information
- *	necessary for GTK rekeying in the device, see &enum nl80211_rekey_data.
- *
- * @NL80211_ATTR_SCAN_SUPP_RATES: rates per to be advertised as supported in scan,
- *	nested array attribute containing an entry for each band, with the entry
- *	being a list of supported rates as defined by IEEE 802.11 7.3.2.2 but
- *	without the length restriction (at most %NL80211_MAX_SUPP_RATES).
- *
- * @NL80211_ATTR_HIDDEN_SSID: indicates whether SSID is to be hidden from Beacon
- *	and Probe Response (when response to wildcard Probe Request); see
- *	&enum nl80211_hidden_ssid, represented as a u32
- *
- * @NL80211_ATTR_IE_PROBE_RESP: Information element(s) for Probe Response frame.
- *	This is used with %NL80211_CMD_NEW_BEACON and %NL80211_CMD_SET_BEACON to
- *	provide extra IEs (e.g., WPS/P2P IE) into Probe Response frames when the
- *	driver (or firmware) replies to Probe Request frames.
- * @NL80211_ATTR_IE_ASSOC_RESP: Information element(s) for (Re)Association
- *	Response frames. This is used with %NL80211_CMD_NEW_BEACON and
- *	%NL80211_CMD_SET_BEACON to provide extra IEs (e.g., WPS/P2P IE) into
- *	(Re)Association Response frames when the driver (or firmware) replies to
- *	(Re)Association Request frames.
- *
- * @NL80211_ATTR_STA_WME: Nested attribute containing the wme configuration
- *	of the station, see &enum nl80211_sta_wme_attr.
- * @NL80211_ATTR_SUPPORT_AP_UAPSD: the device supports uapsd when working
- *	as AP.
- *
- * @NL80211_ATTR_ROAM_SUPPORT: Indicates whether the firmware is capable of
- *	roaming to another AP in the same ESS if the signal lever is low.
- *
- * @NL80211_ATTR_PMKSA_CANDIDATE: Nested attribute containing the PMKSA caching
- *	candidate information, see &enum nl80211_pmksa_candidate_attr.
- *
- * @NL80211_ATTR_TX_NO_CCK_RATE: Indicates whether to use CCK rate or not
- *	for management frames transmission. In order to avoid p2p probe/action
- *	frames are being transmitted at CCK rate in 2GHz band, the user space
- *	applications use this attribute.
- *	This attribute is used with %NL80211_CMD_TRIGGER_SCAN and
- *	%NL80211_CMD_FRAME commands.
- *
- * @NL80211_ATTR_TDLS_ACTION: Low level TDLS action code (e.g. link setup
- *	request, link setup confirm, link teardown, etc.). Values are
- *	described in the TDLS (802.11z) specification.
- * @NL80211_ATTR_TDLS_DIALOG_TOKEN: Non-zero token for uniquely identifying a
- *	TDLS conversation between two devices.
- * @NL80211_ATTR_TDLS_OPERATION: High level TDLS operation; see
- *	&enum nl80211_tdls_operation, represented as a u8.
- * @NL80211_ATTR_TDLS_SUPPORT: A flag indicating the device can operate
- *	as a TDLS peer sta.
- * @NL80211_ATTR_TDLS_EXTERNAL_SETUP: The TDLS discovery/setup and teardown
- *	procedures should be performed by sending TDLS packets via
- *	%NL80211_CMD_TDLS_MGMT. Otherwise %NL80211_CMD_TDLS_OPER should be
- *	used for asking the driver to perform a TDLS operation.
- *
- * @NL80211_ATTR_DEVICE_AP_SME: This u32 attribute may be listed for devices
- *	that have AP support to indicate that they have the AP SME integrated
- *	with support for the features listed in this attribute, see
- *	&enum nl80211_ap_sme_features.
- *
- * @NL80211_ATTR_DONT_WAIT_FOR_ACK: Used with %NL80211_CMD_FRAME, this tells
- *	the driver to not wait for an acknowledgement. Note that due to this,
- *	it will also not give a status callback nor return a cookie. This is
- *	mostly useful for probe responses to save airtime.
- *
- * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from
- *	&enum nl80211_feature_flags and is advertised in wiphy information.
- * @NL80211_ATTR_PROBE_RESP_OFFLOAD: Indicates that the HW responds to probe
- *	requests while operating in AP-mode.
- *	This attribute holds a bitmap of the supported protocols for
- *	offloading (see &enum nl80211_probe_resp_offload_support_attr).
- *
- * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire
- *	probe-response frame. The DA field in the 802.11 header is zero-ed out,
- *	to be filled by the FW.
- * @NL80211_ATTR_DISABLE_HT:  Force HT capable interfaces to disable
- *      this feature.  Currently, only supported in mac80211 drivers.
- * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the
- *      ATTR_HT_CAPABILITY to which attention should be paid.
- *      Currently, only mac80211 NICs support this feature.
- *      The values that may be configured are:
- *       MCS rates, MAX-AMSDU, HT-20-40 and HT_CAP_SGI_40
- *       AMPDU density and AMPDU factor.
- *      All values are treated as suggestions and may be ignored
- *      by the driver as required.  The actual values may be seen in
- *      the station debugfs ht_caps file.
- *
- * @NL80211_ATTR_DFS_REGION: region for regulatory rules which this country
- *    abides to when initiating radiation on DFS channels. A country maps
- *    to one DFS region.
- *
- * @NL80211_ATTR_NOACK_MAP: This u16 bitmap contains the No Ack Policy of
- *      up to 16 TIDs.
- *
- * @NL80211_ATTR_INACTIVITY_TIMEOUT: timeout value in seconds, this can be
- *	used by the drivers which has MLME in firmware and does not have support
- *	to report per station tx/rx activity to free up the station entry from
- *	the list. This needs to be used when the driver advertises the
- *	capability to timeout the stations.
- *
- * @NL80211_ATTR_RX_SIGNAL_DBM: signal strength in dBm (as a 32-bit int);
- *	this attribute is (depending on the driver capabilities) added to
- *	received frames indicated with %NL80211_CMD_FRAME.
- *
- * @NL80211_ATTR_BG_SCAN_PERIOD: Background scan period in seconds
- *      or 0 to disable background scan.
- *
- * @NL80211_ATTR_USER_REG_HINT_TYPE: type of regulatory hint passed from
- *	userspace. If unset it is assumed the hint comes directly from
- *	a user. If set code could specify exactly what type of source
- *	was used to provide the hint. For the different types of
- *	allowed user regulatory hints see nl80211_user_reg_hint_type.
- *
- * @NL80211_ATTR_CONN_FAILED_REASON: The reason for which AP has rejected
- *	the connection request from a station. nl80211_connect_failed_reason
- *	enum has different reasons of connection failure.
- *
- * @NL80211_ATTR_AUTH_DATA: Fields and elements in Authentication frames.
- *	This contains the authentication frame body (non-IE and IE data),
- *	excluding the Authentication algorithm number, i.e., starting at the
- *	Authentication transaction sequence number field. It is used with
- *	authentication algorithms that need special fields to be added into
- *	the frames (SAE and FILS). Currently, only the SAE cases use the
- *	initial two fields (Authentication transaction sequence number and
- *	Status code). However, those fields are included in the attribute data
- *	for all authentication algorithms to keep the attribute definition
- *	consistent.
- *
- * @NL80211_ATTR_VHT_CAPABILITY: VHT Capability information element (from
- *	association request when used with NL80211_CMD_NEW_STATION)
- *
- * @NL80211_ATTR_SCAN_FLAGS: scan request control flags (u32)
- *
- * @NL80211_ATTR_P2P_CTWINDOW: P2P GO Client Traffic Window (u8), used with
- *	the START_AP and SET_BSS commands
- * @NL80211_ATTR_P2P_OPPPS: P2P GO opportunistic PS (u8), used with the
- *	START_AP and SET_BSS commands. This can have the values 0 or 1;
- *	if not given in START_AP 0 is assumed, if not given in SET_BSS
- *	no change is made.
- *
- * @NL80211_ATTR_LOCAL_MESH_POWER_MODE: local mesh STA link-specific power mode
- *	defined in &enum nl80211_mesh_power_mode.
- *
- * @NL80211_ATTR_ACL_POLICY: ACL policy, see &enum nl80211_acl_policy,
- *	carried in a u32 attribute
- *
- * @NL80211_ATTR_MAC_ADDRS: Array of nested MAC addresses, used for
- *	MAC ACL.
- *
- * @NL80211_ATTR_MAC_ACL_MAX: u32 attribute to advertise the maximum
- *	number of MAC addresses that a device can support for MAC
- *	ACL.
- *
- * @NL80211_ATTR_RADAR_EVENT: Type of radar event for notification to userspace,
- *	contains a value of enum nl80211_radar_event (u32).
- *
- * @NL80211_ATTR_EXT_CAPA: 802.11 extended capabilities that the kernel driver
- *	has and handles. The format is the same as the IE contents. See
- *	802.11-2012 8.4.2.29 for more information.
- * @NL80211_ATTR_EXT_CAPA_MASK: Extended capabilities that the kernel driver
- *	has set in the %NL80211_ATTR_EXT_CAPA value, for multibit fields.
- *
- * @NL80211_ATTR_STA_CAPABILITY: Station capabilities (u16) are advertised to
- *	the driver, e.g., to enable TDLS power save (PU-APSD).
- *
- * @NL80211_ATTR_STA_EXT_CAPABILITY: Station extended capabilities are
- *	advertised to the driver, e.g., to enable TDLS off channel operations
- *	and PU-APSD.
- *
- * @NL80211_ATTR_PROTOCOL_FEATURES: global nl80211 feature flags, see
- *	&enum nl80211_protocol_features, the attribute is a u32.
- *
- * @NL80211_ATTR_SPLIT_WIPHY_DUMP: flag attribute, userspace supports
- *	receiving the data for a single wiphy split across multiple
- *	messages, given with wiphy dump message
- *
- * @NL80211_ATTR_MDID: Mobility Domain Identifier
- *
- * @NL80211_ATTR_IE_RIC: Resource Information Container Information
- *	Element
- *
- * @NL80211_ATTR_CRIT_PROT_ID: critical protocol identifier requiring increased
- *	reliability, see &enum nl80211_crit_proto_id (u16).
- * @NL80211_ATTR_MAX_CRIT_PROT_DURATION: duration in milliseconds in which
- *      the connection should have increased reliability (u16).
- *
- * @NL80211_ATTR_PEER_AID: Association ID for the peer TDLS station (u16).
- *	This is similar to @NL80211_ATTR_STA_AID but with a difference of being
- *	allowed to be used with the first @NL80211_CMD_SET_STATION command to
- *	update a TDLS peer STA entry.
- *
- * @NL80211_ATTR_COALESCE_RULE: Coalesce rule information.
- *
- * @NL80211_ATTR_CH_SWITCH_COUNT: u32 attribute specifying the number of TBTT's
- *	until the channel switch event.
- * @NL80211_ATTR_CH_SWITCH_BLOCK_TX: flag attribute specifying that transmission
- *	must be blocked on the current channel (before the channel switch
- *	operation).
- * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information
- *	for the time while performing a channel switch.
- * @NL80211_ATTR_CSA_C_OFF_BEACON: An array of offsets (u16) to the channel
- *	switch counters in the beacons tail (%NL80211_ATTR_BEACON_TAIL).
- * @NL80211_ATTR_CSA_C_OFF_PRESP: An array of offsets (u16) to the channel
- *	switch counters in the probe response (%NL80211_ATTR_PROBE_RESP).
- *
- * @NL80211_ATTR_RXMGMT_FLAGS: flags for nl80211_send_mgmt(), u32.
- *	As specified in the &enum nl80211_rxmgmt_flags.
- *
- * @NL80211_ATTR_STA_SUPPORTED_CHANNELS: array of supported channels.
- *
- * @NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES: array of supported
- *      supported operating classes.
- *
- * @NL80211_ATTR_HANDLE_DFS: A flag indicating whether user space
- *	controls DFS operation in IBSS mode. If the flag is included in
- *	%NL80211_CMD_JOIN_IBSS request, the driver will allow use of DFS
- *	channels and reports radar events to userspace. Userspace is required
- *	to react to radar events, e.g. initiate a channel switch or leave the
- *	IBSS network.
- *
- * @NL80211_ATTR_SUPPORT_5_MHZ: A flag indicating that the device supports
- *	5 MHz channel bandwidth.
- * @NL80211_ATTR_SUPPORT_10_MHZ: A flag indicating that the device supports
- *	10 MHz channel bandwidth.
- *
- * @NL80211_ATTR_OPMODE_NOTIF: Operating mode field from Operating Mode
- *	Notification Element based on association request when used with
- *	%NL80211_CMD_NEW_STATION or %NL80211_CMD_SET_STATION (only when
- *	%NL80211_FEATURE_FULL_AP_CLIENT_STATE is supported, or with TDLS);
- *	u8 attribute.
- *
- * @NL80211_ATTR_VENDOR_ID: The vendor ID, either a 24-bit OUI or, if
- *	%NL80211_VENDOR_ID_IS_LINUX is set, a special Linux ID (not used yet)
- * @NL80211_ATTR_VENDOR_SUBCMD: vendor sub-command
- * @NL80211_ATTR_VENDOR_DATA: data for the vendor command, if any; this
- *	attribute is also used for vendor command feature advertisement
- * @NL80211_ATTR_VENDOR_EVENTS: used for event list advertising in the wiphy
- *	info, containing a nested array of possible events
- *
- * @NL80211_ATTR_QOS_MAP: IP DSCP mapping for Interworking QoS mapping. This
- *	data is in the format defined for the payload of the QoS Map Set element
- *	in IEEE Std 802.11-2012, 8.4.2.97.
- *
- * @NL80211_ATTR_MAC_HINT: MAC address recommendation as initial BSS
- * @NL80211_ATTR_WIPHY_FREQ_HINT: frequency of the recommended initial BSS
- *
- * @NL80211_ATTR_MAX_AP_ASSOC_STA: Device attribute that indicates how many
- *	associated stations are supported in AP mode (including P2P GO); u32.
- *	Since drivers may not have a fixed limit on the maximum number (e.g.,
- *	other concurrent operations may affect this), drivers are allowed to
- *	advertise values that cannot always be met. In such cases, an attempt
- *	to add a new station entry with @NL80211_CMD_NEW_STATION may fail.
- *
- * @NL80211_ATTR_CSA_C_OFFSETS_TX: An array of csa counter offsets (u16) which
- *	should be updated when the frame is transmitted.
- * @NL80211_ATTR_MAX_CSA_COUNTERS: U8 attribute used to advertise the maximum
- *	supported number of csa counters.
- *
- * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32.
- *	As specified in the &enum nl80211_tdls_peer_capability.
- *
- * @NL80211_ATTR_SOCKET_OWNER: Flag attribute, if set during interface
- *	creation then the new interface will be owned by the netlink socket
- *	that created it and will be destroyed when the socket is closed.
- *	If set during scheduled scan start then the new scan req will be
- *	owned by the netlink socket that created it and the scheduled scan will
- *	be stopped when the socket is closed.
- *	If set during configuration of regulatory indoor operation then the
- *	regulatory indoor configuration would be owned by the netlink socket
- *	that configured the indoor setting, and the indoor operation would be
- *	cleared when the socket is closed.
- *	If set during NAN interface creation, the interface will be destroyed
- *	if the socket is closed just like any other interface. Moreover, NAN
- *	notifications will be sent in unicast to that socket. Without this
- *	attribute, the notifications will be sent to the %NL80211_MCGRP_NAN
- *	multicast group.
- *	If set during %NL80211_CMD_ASSOCIATE or %NL80211_CMD_CONNECT the
- *	station will deauthenticate when the socket is closed.
- *	If set during %NL80211_CMD_JOIN_IBSS the IBSS will be automatically
- *	torn down when the socket is closed.
- *	If set during %NL80211_CMD_JOIN_MESH the mesh setup will be
- *	automatically torn down when the socket is closed.
- *	If set during %NL80211_CMD_START_AP the AP will be automatically
- *	disabled when the socket is closed.
- *
- * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is
- *	the TDLS link initiator.
- *
- * @NL80211_ATTR_USE_RRM: flag for indicating whether the current connection
- *	shall support Radio Resource Measurements (11k). This attribute can be
- *	used with %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests.
- *	User space applications are expected to use this flag only if the
- *	underlying device supports these minimal RRM features:
- *		%NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES,
- *		%NL80211_FEATURE_QUIET,
- *	Or, if global RRM is supported, see:
- *		%NL80211_EXT_FEATURE_RRM
- *	If this flag is used, driver must add the Power Capabilities IE to the
- *	association request. In addition, it must also set the RRM capability
- *	flag in the association request's Capability Info field.
- *
- * @NL80211_ATTR_WIPHY_DYN_ACK: flag attribute used to enable ACK timeout
- *	estimation algorithm (dynack). In order to activate dynack
- *	%NL80211_FEATURE_ACKTO_ESTIMATION feature flag must be set by lower
- *	drivers to indicate dynack capability. Dynack is automatically disabled
- *	setting valid value for coverage class.
- *
- * @NL80211_ATTR_TSID: a TSID value (u8 attribute)
- * @NL80211_ATTR_USER_PRIO: user priority value (u8 attribute)
- * @NL80211_ATTR_ADMITTED_TIME: admitted time in units of 32 microseconds
- *	(per second) (u16 attribute)
- *
- * @NL80211_ATTR_SMPS_MODE: SMPS mode to use (ap mode). see
- *	&enum nl80211_smps_mode.
- *
- * @NL80211_ATTR_OPER_CLASS: operating class
- *
- * @NL80211_ATTR_MAC_MASK: MAC address mask
- *
- * @NL80211_ATTR_WIPHY_SELF_MANAGED_REG: flag attribute indicating this device
- *	is self-managing its regulatory information and any regulatory domain
- *	obtained from it is coming from the device's wiphy and not the global
- *	cfg80211 regdomain.
- *
- * @NL80211_ATTR_EXT_FEATURES: extended feature flags contained in a byte
- *	array. The feature flags are identified by their bit index (see &enum
- *	nl80211_ext_feature_index). The bit index is ordered starting at the
- *	least-significant bit of the first byte in the array, ie. bit index 0
- *	is located at bit 0 of byte 0. bit index 25 would be located at bit 1
- *	of byte 3 (u8 array).
- *
- * @NL80211_ATTR_SURVEY_RADIO_STATS: Request overall radio statistics to be
- *	returned along with other survey data. If set, @NL80211_CMD_GET_SURVEY
- *	may return a survey entry without a channel indicating global radio
- *	statistics (only some values are valid and make sense.)
- *	For devices that don't return such an entry even then, the information
- *	should be contained in the result as the sum of the respective counters
- *	over all channels.
- *
- * @NL80211_ATTR_SCHED_SCAN_DELAY: delay before the first cycle of a
- *	scheduled scan is started.  Or the delay before a WoWLAN
- *	net-detect scan is started, counting from the moment the
- *	system is suspended.  This value is a u32, in seconds.
-
- * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device
- *      is operating in an indoor environment.
- *
- * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS: maximum number of scan plans for
- *	scheduled scan supported by the device (u32), a wiphy attribute.
- * @NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL: maximum interval (in seconds) for
- *	a scan plan (u32), a wiphy attribute.
- * @NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS: maximum number of iterations in
- *	a scan plan (u32), a wiphy attribute.
- * @NL80211_ATTR_SCHED_SCAN_PLANS: a list of scan plans for scheduled scan.
- *	Each scan plan defines the number of scan iterations and the interval
- *	between scans. The last scan plan will always run infinitely,
- *	thus it must not specify the number of iterations, only the interval
- *	between scans. The scan plans are executed sequentially.
- *	Each scan plan is a nested attribute of &enum nl80211_sched_scan_plan.
- * @NL80211_ATTR_PBSS: flag attribute. If set it means operate
- *	in a PBSS. Specified in %NL80211_CMD_CONNECT to request
- *	connecting to a PCP, and in %NL80211_CMD_START_AP to start
- *	a PCP instead of AP. Relevant for DMG networks only.
- * @NL80211_ATTR_BSS_SELECT: nested attribute for driver supporting the
- *	BSS selection feature. When used with %NL80211_CMD_GET_WIPHY it contains
- *	attributes according &enum nl80211_bss_select_attr to indicate what
- *	BSS selection behaviours are supported. When used with %NL80211_CMD_CONNECT
- *	it contains the behaviour-specific attribute containing the parameters for
- *	BSS selection to be done by driver and/or firmware.
- *
- * @NL80211_ATTR_STA_SUPPORT_P2P_PS: whether P2P PS mechanism supported
- *	or not. u8, one of the values of &enum nl80211_sta_p2p_ps_status
- *
- * @NL80211_ATTR_PAD: attribute used for padding for 64-bit alignment
- *
- * @NL80211_ATTR_IFTYPE_EXT_CAPA: Nested attribute of the following attributes:
- *	%NL80211_ATTR_IFTYPE, %NL80211_ATTR_EXT_CAPA,
- *	%NL80211_ATTR_EXT_CAPA_MASK, to specify the extended capabilities per
- *	interface type.
- *
- * @NL80211_ATTR_MU_MIMO_GROUP_DATA: array of 24 bytes that defines a MU-MIMO
- *	groupID for monitor mode.
- *	The first 8 bytes are a mask that defines the membership in each
- *	group (there are 64 groups, group 0 and 63 are reserved),
- *	each bit represents a group and set to 1 for being a member in
- *	that group and 0 for not being a member.
- *	The remaining 16 bytes define the position in each group: 2 bits for
- *	each group.
- *	(smaller group numbers represented on most significant bits and bigger
- *	group numbers on least significant bits.)
- *	This attribute is used only if all interfaces are in monitor mode.
- *	Set this attribute in order to monitor packets using the given MU-MIMO
- *	groupID data.
- *	to turn off that feature set all the bits of the groupID to zero.
- * @NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR: mac address for the sniffer to follow
- *	when using MU-MIMO air sniffer.
- *	to turn that feature off set an invalid mac address
- *	(e.g. FF:FF:FF:FF:FF:FF)
- *
- * @NL80211_ATTR_SCAN_START_TIME_TSF: The time at which the scan was actually
- *	started (u64). The time is the TSF of the BSS the interface that
- *	requested the scan is connected to (if available, otherwise this
- *	attribute must not be included).
- * @NL80211_ATTR_SCAN_START_TIME_TSF_BSSID: The BSS according to which
- *	%NL80211_ATTR_SCAN_START_TIME_TSF is set.
- * @NL80211_ATTR_MEASUREMENT_DURATION: measurement duration in TUs (u16). If
- *	%NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY is not set, this is the
- *	maximum measurement duration allowed. This attribute is used with
- *	measurement requests. It can also be used with %NL80211_CMD_TRIGGER_SCAN
- *	if the scan is used for beacon report radio measurement.
- * @NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY: flag attribute that indicates
- *	that the duration specified with %NL80211_ATTR_MEASUREMENT_DURATION is
- *	mandatory. If this flag is not set, the duration is the maximum duration
- *	and the actual measurement duration may be shorter.
- *
- * @NL80211_ATTR_MESH_PEER_AID: Association ID for the mesh peer (u16). This is
- *	used to pull the stored data for mesh peer in power save state.
- *
- * @NL80211_ATTR_NAN_MASTER_PREF: the master preference to be used by
- *	%NL80211_CMD_START_NAN and optionally with
- *	%NL80211_CMD_CHANGE_NAN_CONFIG. Its type is u8 and it can't be 0.
- *	Also, values 1 and 255 are reserved for certification purposes and
- *	should not be used during a normal device operation.
- * @NL80211_ATTR_BANDS: operating bands configuration.  This is a u32
- *	bitmask of BIT(NL80211_BAND_*) as described in %enum
- *	nl80211_band.  For instance, for NL80211_BAND_2GHZ, bit 0
- *	would be set.  This attribute is used with
- *	%NL80211_CMD_START_NAN and %NL80211_CMD_CHANGE_NAN_CONFIG, and
- *	it is optional.  If no bands are set, it means don't-care and
- *	the device will decide what to use.
- * @NL80211_ATTR_NAN_FUNC: a function that can be added to NAN. See
- *	&enum nl80211_nan_func_attributes for description of this nested
- *	attribute.
- * @NL80211_ATTR_NAN_MATCH: used to report a match. This is a nested attribute.
- *	See &enum nl80211_nan_match_attributes.
- * @NL80211_ATTR_FILS_KEK: KEK for FILS (Re)Association Request/Response frame
- *	protection.
- * @NL80211_ATTR_FILS_NONCES: Nonces (part of AAD) for FILS (Re)Association
- *	Request/Response frame protection. This attribute contains the 16 octet
- *	STA Nonce followed by 16 octets of AP Nonce.
- *
- * @NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED: Indicates whether or not multicast
- *	packets should be send out as unicast to all stations (flag attribute).
- *
- * @NL80211_ATTR_BSSID: The BSSID of the AP. Note that %NL80211_ATTR_MAC is also
- *	used in various commands/events for specifying the BSSID.
- *
- * @NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI: Relative RSSI threshold by which
- *	other BSSs has to be better or slightly worse than the current
- *	connected BSS so that they get reported to user space.
- *	This will give an opportunity to userspace to consider connecting to
- *	other matching BSSs which have better or slightly worse RSSI than
- *	the current connected BSS by using an offloaded operation to avoid
- *	unnecessary wakeups.
- *
- * @NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST: When present the RSSI level for BSSs in
- *	the specified band is to be adjusted before doing
- *	%NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI based comparison to figure out
- *	better BSSs. The attribute value is a packed structure
- *	value as specified by &struct nl80211_bss_select_rssi_adjust.
- *
- * @NL80211_ATTR_TIMEOUT_REASON: The reason for which an operation timed out.
- *	u32 attribute with an &enum nl80211_timeout_reason value. This is used,
- *	e.g., with %NL80211_CMD_CONNECT event.
- *
- * @NL80211_ATTR_FILS_ERP_USERNAME: EAP Re-authentication Protocol (ERP)
- *	username part of NAI used to refer keys rRK and rIK. This is used with
- *	%NL80211_CMD_CONNECT.
- *
- * @NL80211_ATTR_FILS_ERP_REALM: EAP Re-authentication Protocol (ERP) realm part
- *	of NAI specifying the domain name of the ER server. This is used with
- *	%NL80211_CMD_CONNECT.
- *
- * @NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM: Unsigned 16-bit ERP next sequence number
- *	to use in ERP messages. This is used in generating the FILS wrapped data
- *	for FILS authentication and is used with %NL80211_CMD_CONNECT.
- *
- * @NL80211_ATTR_FILS_ERP_RRK: ERP re-authentication Root Key (rRK) for the
- *	NAI specified by %NL80211_ATTR_FILS_ERP_USERNAME and
- *	%NL80211_ATTR_FILS_ERP_REALM. This is used for generating rIK and rMSK
- *	from successful FILS authentication and is used with
- *	%NL80211_CMD_CONNECT.
- *
- * @NL80211_ATTR_FILS_CACHE_ID: A 2-octet identifier advertized by a FILS AP
- *	identifying the scope of PMKSAs. This is used with
- *	@NL80211_CMD_SET_PMKSA and @NL80211_CMD_DEL_PMKSA.
- *
- * @NL80211_ATTR_PMK: attribute for passing PMK key material. Used with
- *	%NL80211_CMD_SET_PMKSA for the PMKSA identified by %NL80211_ATTR_PMKID.
- *	For %NL80211_CMD_CONNECT it is used to provide PSK for offloading 4-way
- *	handshake for WPA/WPA2-PSK networks. For 802.1X authentication it is
- *	used with %NL80211_CMD_SET_PMK. For offloaded FT support this attribute
- *	specifies the PMK-R0 if NL80211_ATTR_PMKR0_NAME is included as well.
- *
- * @NL80211_ATTR_SCHED_SCAN_MULTI: flag attribute which user-space shall use to
- *	indicate that it supports multiple active scheduled scan requests.
- * @NL80211_ATTR_SCHED_SCAN_MAX_REQS: indicates maximum number of scheduled
- *	scan request that may be active for the device (u32).
- *
- * @NL80211_ATTR_WANT_1X_4WAY_HS: flag attribute which user-space can include
- *	in %NL80211_CMD_CONNECT to indicate that for 802.1X authentication it
- *	wants to use the supported offload of the 4-way handshake.
- * @NL80211_ATTR_PMKR0_NAME: PMK-R0 Name for offloaded FT.
- * @NL80211_ATTR_PORT_AUTHORIZED: (reserved)
- *
- * @NL80211_ATTR_EXTERNAL_AUTH_ACTION: Identify the requested external
- *     authentication operation (u32 attribute with an
- *     &enum nl80211_external_auth_action value). This is used with the
- *     %NL80211_CMD_EXTERNAL_AUTH request event.
- * @NL80211_ATTR_EXTERNAL_AUTH_SUPPORT: Flag attribute indicating that the user
- *	space supports external authentication. This attribute shall be used
- *	with %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP request. The driver
- *	may offload authentication processing to user space if this capability
- *	is indicated in the respective requests from the user space.
- *
- * @NL80211_ATTR_NSS: Station's New/updated  RX_NSS value notified using this
- *	u8 attribute. This is used with %NL80211_CMD_STA_OPMODE_CHANGED.
- *
- * @NL80211_ATTR_TXQ_STATS: TXQ statistics (nested attribute, see &enum
- *      nl80211_txq_stats)
- * @NL80211_ATTR_TXQ_LIMIT: Total packet limit for the TXQ queues for this phy.
- *      The smaller of this and the memory limit is enforced.
- * @NL80211_ATTR_TXQ_MEMORY_LIMIT: Total memory memory limit (in bytes) for the
- *      TXQ queues for this phy. The smaller of this and the packet limit is
- *      enforced.
- * @NL80211_ATTR_TXQ_QUANTUM: TXQ scheduler quantum (bytes). Number of bytes
- *      a flow is assigned on each round of the DRR scheduler.
- * @NL80211_ATTR_HE_CAPABILITY: HE Capability information element (from
- *	association request when used with NL80211_CMD_NEW_STATION). Can be set
- *	only if %NL80211_STA_FLAG_WME is set.
- *
- * @NL80211_ATTR_FTM_RESPONDER: nested attribute which user-space can include
- *	in %NL80211_CMD_START_AP or %NL80211_CMD_SET_BEACON for fine timing
- *	measurement (FTM) responder functionality and containing parameters as
- *	possible, see &enum nl80211_ftm_responder_attr
- *
- * @NL80211_ATTR_FTM_RESPONDER_STATS: Nested attribute with FTM responder
- *	statistics, see &enum nl80211_ftm_responder_stats.
- *
- * @NL80211_ATTR_TIMEOUT: Timeout for the given operation in milliseconds (u32),
- *	if the attribute is not given no timeout is requested. Note that 0 is an
- *	invalid value.
- *
- * @NL80211_ATTR_PEER_MEASUREMENTS: peer measurements request (and result)
- *	data, uses nested attributes specified in
- *	&enum nl80211_peer_measurement_attrs.
- *	This is also used for capability advertisement in the wiphy information,
- *	with the appropriate sub-attributes.
- *
- * @NL80211_ATTR_AIRTIME_WEIGHT: Station's weight when scheduled by the airtime
- *	scheduler.
- *
- * @NL80211_ATTR_STA_TX_POWER_SETTING: Transmit power setting type (u8) for
- *	station associated with the AP. See &enum nl80211_tx_power_setting for
- *	possible values.
- * @NL80211_ATTR_STA_TX_POWER: Transmit power level (s16) in dBm units. This
- *	allows to set Tx power for a station. If this attribute is not included,
- *	the default per-interface tx power setting will be overriding. Driver
- *	should be picking up the lowest tx power, either tx power per-interface
- *	or per-station.
- *
- * @NL80211_ATTR_SAE_PASSWORD: attribute for passing SAE password material. It
- *	is used with %NL80211_CMD_CONNECT to provide password for offloading
- *	SAE authentication for WPA3-Personal networks.
- *
- * @NL80211_ATTR_TWT_RESPONDER: Enable target wait time responder support.
- *
- * @NL80211_ATTR_HE_OBSS_PD: nested attribute for OBSS Packet Detection
- *	functionality.
- *
- * @NL80211_ATTR_WIPHY_EDMG_CHANNELS: bitmap that indicates the 2.16 GHz
- *	channel(s) that are allowed to be used for EDMG transmissions.
- *	Defined by IEEE P802.11ay/D4.0 section 9.4.2.251. (u8 attribute)
- * @NL80211_ATTR_WIPHY_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes
- *	the allowed channel bandwidth configurations. (u8 attribute)
- *	Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13.
- *
- * @NL80211_ATTR_VLAN_ID: VLAN ID (1..4094) for the station and VLAN group key
- *	(u16).
- *
- * @NL80211_ATTR_HE_BSS_COLOR: nested attribute for BSS Color Settings.
- *
- * @NL80211_ATTR_IFTYPE_AKM_SUITES: nested array attribute, with each entry
- *	using attributes from &enum nl80211_iftype_akm_attributes. This
- *	attribute is sent in a response to %NL80211_CMD_GET_WIPHY indicating
- *	supported AKM suites capability per interface. AKMs advertised in
- *	%NL80211_ATTR_AKM_SUITES are default capabilities if AKM suites not
- *	advertised for a specific interface type.
- *
- * @NL80211_ATTR_TID_CONFIG: TID specific configuration in a
- *	nested attribute with &enum nl80211_tid_config_attr sub-attributes;
- *	on output (in wiphy attributes) it contains only the feature sub-
- *	attributes.
- *
- * @NL80211_ATTR_CONTROL_PORT_NO_PREAUTH: disable preauth frame rx on control
- *	port in order to forward/receive them as ordinary data frames.
- *
- * @NL80211_ATTR_PMK_LIFETIME: Maximum lifetime for PMKSA in seconds (u32,
- *	dot11RSNAConfigPMKReauthThreshold; 0 is not a valid value).
- *	An optional parameter configured through %NL80211_CMD_SET_PMKSA.
- *	Drivers that trigger roaming need to know the lifetime of the
- *	configured PMKSA for triggering the full vs. PMKSA caching based
- *	authentication. This timeout helps authentication methods like SAE,
- *	where PMK gets updated only by going through a full (new SAE)
- *	authentication instead of getting updated during an association for EAP
- *	authentication. No new full authentication within the PMK expiry shall
- *	result in a disassociation at the end of the lifetime.
- *
- * @NL80211_ATTR_PMK_REAUTH_THRESHOLD: Reauthentication threshold time, in
- *	terms of percentage of %NL80211_ATTR_PMK_LIFETIME
- *	(u8, dot11RSNAConfigPMKReauthThreshold, 1..100). This is an optional
- *	parameter configured through %NL80211_CMD_SET_PMKSA. Requests the
- *	driver to trigger a full authentication roam (without PMKSA caching)
- *	after the reauthentication threshold time, but before the PMK lifetime
- *	has expired.
- *
- *	Authentication methods like SAE need to be able to generate a new PMKSA
- *	entry without having to force a disconnection after the PMK timeout. If
- *	no roaming occurs between the reauth threshold and PMK expiration,
- *	disassociation is still forced.
- *
- * @NUM_NL80211_ATTR: total number of nl80211_attrs available
- * @NL80211_ATTR_MAX: highest attribute number currently defined
- * @__NL80211_ATTR_AFTER_LAST: internal use
- */
-enum nl80211_attrs {
-/* don't change the order or add anything between, this is ABI! */
-	NL80211_ATTR_UNSPEC,
-
-	NL80211_ATTR_WIPHY,
-	NL80211_ATTR_WIPHY_NAME,
-
-	NL80211_ATTR_IFINDEX,
-	NL80211_ATTR_IFNAME,
-	NL80211_ATTR_IFTYPE,
-
-	NL80211_ATTR_MAC,
-
-	NL80211_ATTR_KEY_DATA,
-	NL80211_ATTR_KEY_IDX,
-	NL80211_ATTR_KEY_CIPHER,
-	NL80211_ATTR_KEY_SEQ,
-	NL80211_ATTR_KEY_DEFAULT,
-
-	NL80211_ATTR_BEACON_INTERVAL,
-	NL80211_ATTR_DTIM_PERIOD,
-	NL80211_ATTR_BEACON_HEAD,
-	NL80211_ATTR_BEACON_TAIL,
-
-	NL80211_ATTR_STA_AID,
-	NL80211_ATTR_STA_FLAGS,
-	NL80211_ATTR_STA_LISTEN_INTERVAL,
-	NL80211_ATTR_STA_SUPPORTED_RATES,
-	NL80211_ATTR_STA_VLAN,
-	NL80211_ATTR_STA_INFO,
-
-	NL80211_ATTR_WIPHY_BANDS,
-
-	NL80211_ATTR_MNTR_FLAGS,
-
-	NL80211_ATTR_MESH_ID,
-	NL80211_ATTR_STA_PLINK_ACTION,
-	NL80211_ATTR_MPATH_NEXT_HOP,
-	NL80211_ATTR_MPATH_INFO,
-
-	NL80211_ATTR_BSS_CTS_PROT,
-	NL80211_ATTR_BSS_SHORT_PREAMBLE,
-	NL80211_ATTR_BSS_SHORT_SLOT_TIME,
-
-	NL80211_ATTR_HT_CAPABILITY,
-
-	NL80211_ATTR_SUPPORTED_IFTYPES,
-
-	NL80211_ATTR_REG_ALPHA2,
-	NL80211_ATTR_REG_RULES,
-
-	NL80211_ATTR_MESH_CONFIG,
-
-	NL80211_ATTR_BSS_BASIC_RATES,
-
-	NL80211_ATTR_WIPHY_TXQ_PARAMS,
-	NL80211_ATTR_WIPHY_FREQ,
-	NL80211_ATTR_WIPHY_CHANNEL_TYPE,
-
-	NL80211_ATTR_KEY_DEFAULT_MGMT,
-
-	NL80211_ATTR_MGMT_SUBTYPE,
-	NL80211_ATTR_IE,
-
-	NL80211_ATTR_MAX_NUM_SCAN_SSIDS,
-
-	NL80211_ATTR_SCAN_FREQUENCIES,
-	NL80211_ATTR_SCAN_SSIDS,
-	NL80211_ATTR_GENERATION, /* replaces old SCAN_GENERATION */
-	NL80211_ATTR_BSS,
-
-	NL80211_ATTR_REG_INITIATOR,
-	NL80211_ATTR_REG_TYPE,
-
-	NL80211_ATTR_SUPPORTED_COMMANDS,
-
-	NL80211_ATTR_FRAME,
-	NL80211_ATTR_SSID,
-	NL80211_ATTR_AUTH_TYPE,
-	NL80211_ATTR_REASON_CODE,
-
-	NL80211_ATTR_KEY_TYPE,
-
-	NL80211_ATTR_MAX_SCAN_IE_LEN,
-	NL80211_ATTR_CIPHER_SUITES,
-
-	NL80211_ATTR_FREQ_BEFORE,
-	NL80211_ATTR_FREQ_AFTER,
-
-	NL80211_ATTR_FREQ_FIXED,
-
-
-	NL80211_ATTR_WIPHY_RETRY_SHORT,
-	NL80211_ATTR_WIPHY_RETRY_LONG,
-	NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
-	NL80211_ATTR_WIPHY_RTS_THRESHOLD,
-
-	NL80211_ATTR_TIMED_OUT,
-
-	NL80211_ATTR_USE_MFP,
-
-	NL80211_ATTR_STA_FLAGS2,
-
-	NL80211_ATTR_CONTROL_PORT,
-
-	NL80211_ATTR_TESTDATA,
-
-	NL80211_ATTR_PRIVACY,
-
-	NL80211_ATTR_DISCONNECTED_BY_AP,
-	NL80211_ATTR_STATUS_CODE,
-
-	NL80211_ATTR_CIPHER_SUITES_PAIRWISE,
-	NL80211_ATTR_CIPHER_SUITE_GROUP,
-	NL80211_ATTR_WPA_VERSIONS,
-	NL80211_ATTR_AKM_SUITES,
-
-	NL80211_ATTR_REQ_IE,
-	NL80211_ATTR_RESP_IE,
-
-	NL80211_ATTR_PREV_BSSID,
-
-	NL80211_ATTR_KEY,
-	NL80211_ATTR_KEYS,
-
-	NL80211_ATTR_PID,
-
-	NL80211_ATTR_4ADDR,
-
-	NL80211_ATTR_SURVEY_INFO,
-
-	NL80211_ATTR_PMKID,
-	NL80211_ATTR_MAX_NUM_PMKIDS,
-
-	NL80211_ATTR_DURATION,
-
-	NL80211_ATTR_COOKIE,
-
-	NL80211_ATTR_WIPHY_COVERAGE_CLASS,
-
-	NL80211_ATTR_TX_RATES,
-
-	NL80211_ATTR_FRAME_MATCH,
-
-	NL80211_ATTR_ACK,
-
-	NL80211_ATTR_PS_STATE,
-
-	NL80211_ATTR_CQM,
-
-	NL80211_ATTR_LOCAL_STATE_CHANGE,
-
-	NL80211_ATTR_AP_ISOLATE,
-
-	NL80211_ATTR_WIPHY_TX_POWER_SETTING,
-	NL80211_ATTR_WIPHY_TX_POWER_LEVEL,
-
-	NL80211_ATTR_TX_FRAME_TYPES,
-	NL80211_ATTR_RX_FRAME_TYPES,
-	NL80211_ATTR_FRAME_TYPE,
-
-	NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
-	NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT,
-
-	NL80211_ATTR_SUPPORT_IBSS_RSN,
-
-	NL80211_ATTR_WIPHY_ANTENNA_TX,
-	NL80211_ATTR_WIPHY_ANTENNA_RX,
-
-	NL80211_ATTR_MCAST_RATE,
-
-	NL80211_ATTR_OFFCHANNEL_TX_OK,
-
-	NL80211_ATTR_BSS_HT_OPMODE,
-
-	NL80211_ATTR_KEY_DEFAULT_TYPES,
-
-	NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION,
-
-	NL80211_ATTR_MESH_SETUP,
-
-	NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX,
-	NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX,
-
-	NL80211_ATTR_SUPPORT_MESH_AUTH,
-	NL80211_ATTR_STA_PLINK_STATE,
-
-	NL80211_ATTR_WOWLAN_TRIGGERS,
-	NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED,
-
-	NL80211_ATTR_SCHED_SCAN_INTERVAL,
-
-	NL80211_ATTR_INTERFACE_COMBINATIONS,
-	NL80211_ATTR_SOFTWARE_IFTYPES,
-
-	NL80211_ATTR_REKEY_DATA,
-
-	NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS,
-	NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN,
-
-	NL80211_ATTR_SCAN_SUPP_RATES,
-
-	NL80211_ATTR_HIDDEN_SSID,
-
-	NL80211_ATTR_IE_PROBE_RESP,
-	NL80211_ATTR_IE_ASSOC_RESP,
-
-	NL80211_ATTR_STA_WME,
-	NL80211_ATTR_SUPPORT_AP_UAPSD,
-
-	NL80211_ATTR_ROAM_SUPPORT,
-
-	NL80211_ATTR_SCHED_SCAN_MATCH,
-	NL80211_ATTR_MAX_MATCH_SETS,
-
-	NL80211_ATTR_PMKSA_CANDIDATE,
-
-	NL80211_ATTR_TX_NO_CCK_RATE,
-
-	NL80211_ATTR_TDLS_ACTION,
-	NL80211_ATTR_TDLS_DIALOG_TOKEN,
-	NL80211_ATTR_TDLS_OPERATION,
-	NL80211_ATTR_TDLS_SUPPORT,
-	NL80211_ATTR_TDLS_EXTERNAL_SETUP,
-
-	NL80211_ATTR_DEVICE_AP_SME,
-
-	NL80211_ATTR_DONT_WAIT_FOR_ACK,
-
-	NL80211_ATTR_FEATURE_FLAGS,
-
-	NL80211_ATTR_PROBE_RESP_OFFLOAD,
-
-	NL80211_ATTR_PROBE_RESP,
-
-	NL80211_ATTR_DFS_REGION,
-
-	NL80211_ATTR_DISABLE_HT,
-	NL80211_ATTR_HT_CAPABILITY_MASK,
-
-	NL80211_ATTR_NOACK_MAP,
-
-	NL80211_ATTR_INACTIVITY_TIMEOUT,
-
-	NL80211_ATTR_RX_SIGNAL_DBM,
-
-	NL80211_ATTR_BG_SCAN_PERIOD,
-
-	NL80211_ATTR_WDEV,
-
-	NL80211_ATTR_USER_REG_HINT_TYPE,
-
-	NL80211_ATTR_CONN_FAILED_REASON,
-
-	NL80211_ATTR_AUTH_DATA,
-
-	NL80211_ATTR_VHT_CAPABILITY,
-
-	NL80211_ATTR_SCAN_FLAGS,
-
-	NL80211_ATTR_CHANNEL_WIDTH,
-	NL80211_ATTR_CENTER_FREQ1,
-	NL80211_ATTR_CENTER_FREQ2,
-
-	NL80211_ATTR_P2P_CTWINDOW,
-	NL80211_ATTR_P2P_OPPPS,
-
-	NL80211_ATTR_LOCAL_MESH_POWER_MODE,
-
-	NL80211_ATTR_ACL_POLICY,
-
-	NL80211_ATTR_MAC_ADDRS,
-
-	NL80211_ATTR_MAC_ACL_MAX,
-
-	NL80211_ATTR_RADAR_EVENT,
-
-	NL80211_ATTR_EXT_CAPA,
-	NL80211_ATTR_EXT_CAPA_MASK,
-
-	NL80211_ATTR_STA_CAPABILITY,
-	NL80211_ATTR_STA_EXT_CAPABILITY,
-
-	NL80211_ATTR_PROTOCOL_FEATURES,
-	NL80211_ATTR_SPLIT_WIPHY_DUMP,
-
-	NL80211_ATTR_DISABLE_VHT,
-	NL80211_ATTR_VHT_CAPABILITY_MASK,
-
-	NL80211_ATTR_MDID,
-	NL80211_ATTR_IE_RIC,
-
-	NL80211_ATTR_CRIT_PROT_ID,
-	NL80211_ATTR_MAX_CRIT_PROT_DURATION,
-
-	NL80211_ATTR_PEER_AID,
-
-	NL80211_ATTR_COALESCE_RULE,
-
-	NL80211_ATTR_CH_SWITCH_COUNT,
-	NL80211_ATTR_CH_SWITCH_BLOCK_TX,
-	NL80211_ATTR_CSA_IES,
-	NL80211_ATTR_CSA_C_OFF_BEACON,
-	NL80211_ATTR_CSA_C_OFF_PRESP,
-
-	NL80211_ATTR_RXMGMT_FLAGS,
-
-	NL80211_ATTR_STA_SUPPORTED_CHANNELS,
-
-	NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES,
-
-	NL80211_ATTR_HANDLE_DFS,
-
-	NL80211_ATTR_SUPPORT_5_MHZ,
-	NL80211_ATTR_SUPPORT_10_MHZ,
-
-	NL80211_ATTR_OPMODE_NOTIF,
-
-	NL80211_ATTR_VENDOR_ID,
-	NL80211_ATTR_VENDOR_SUBCMD,
-	NL80211_ATTR_VENDOR_DATA,
-	NL80211_ATTR_VENDOR_EVENTS,
-
-	NL80211_ATTR_QOS_MAP,
-
-	NL80211_ATTR_MAC_HINT,
-	NL80211_ATTR_WIPHY_FREQ_HINT,
-
-	NL80211_ATTR_MAX_AP_ASSOC_STA,
-
-	NL80211_ATTR_TDLS_PEER_CAPABILITY,
-
-	NL80211_ATTR_SOCKET_OWNER,
-
-	NL80211_ATTR_CSA_C_OFFSETS_TX,
-	NL80211_ATTR_MAX_CSA_COUNTERS,
-
-	NL80211_ATTR_TDLS_INITIATOR,
-
-	NL80211_ATTR_USE_RRM,
-
-	NL80211_ATTR_WIPHY_DYN_ACK,
-
-	NL80211_ATTR_TSID,
-	NL80211_ATTR_USER_PRIO,
-	NL80211_ATTR_ADMITTED_TIME,
-
-	NL80211_ATTR_SMPS_MODE,
-
-	NL80211_ATTR_OPER_CLASS,
-
-	NL80211_ATTR_MAC_MASK,
-
-	NL80211_ATTR_WIPHY_SELF_MANAGED_REG,
-
-	NL80211_ATTR_EXT_FEATURES,
-
-	NL80211_ATTR_SURVEY_RADIO_STATS,
-
-	NL80211_ATTR_NETNS_FD,
-
-	NL80211_ATTR_SCHED_SCAN_DELAY,
-
-	NL80211_ATTR_REG_INDOOR,
-
-	NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS,
-	NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL,
-	NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS,
-	NL80211_ATTR_SCHED_SCAN_PLANS,
-
-	NL80211_ATTR_PBSS,
-
-	NL80211_ATTR_BSS_SELECT,
-
-	NL80211_ATTR_STA_SUPPORT_P2P_PS,
-
-	NL80211_ATTR_PAD,
-
-	NL80211_ATTR_IFTYPE_EXT_CAPA,
-
-	NL80211_ATTR_MU_MIMO_GROUP_DATA,
-	NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR,
-
-	NL80211_ATTR_SCAN_START_TIME_TSF,
-	NL80211_ATTR_SCAN_START_TIME_TSF_BSSID,
-	NL80211_ATTR_MEASUREMENT_DURATION,
-	NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY,
-
-	NL80211_ATTR_MESH_PEER_AID,
-
-	NL80211_ATTR_NAN_MASTER_PREF,
-	NL80211_ATTR_BANDS,
-	NL80211_ATTR_NAN_FUNC,
-	NL80211_ATTR_NAN_MATCH,
-
-	NL80211_ATTR_FILS_KEK,
-	NL80211_ATTR_FILS_NONCES,
-
-	NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED,
-
-	NL80211_ATTR_BSSID,
-
-	NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI,
-	NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST,
-
-	NL80211_ATTR_TIMEOUT_REASON,
-
-	NL80211_ATTR_FILS_ERP_USERNAME,
-	NL80211_ATTR_FILS_ERP_REALM,
-	NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM,
-	NL80211_ATTR_FILS_ERP_RRK,
-	NL80211_ATTR_FILS_CACHE_ID,
-
-	NL80211_ATTR_PMK,
-
-	NL80211_ATTR_SCHED_SCAN_MULTI,
-	NL80211_ATTR_SCHED_SCAN_MAX_REQS,
-
-	NL80211_ATTR_WANT_1X_4WAY_HS,
-	NL80211_ATTR_PMKR0_NAME,
-	NL80211_ATTR_PORT_AUTHORIZED,
-
-	NL80211_ATTR_EXTERNAL_AUTH_ACTION,
-	NL80211_ATTR_EXTERNAL_AUTH_SUPPORT,
-
-	NL80211_ATTR_NSS,
-	NL80211_ATTR_ACK_SIGNAL,
-
-	NL80211_ATTR_CONTROL_PORT_OVER_NL80211,
-
-	NL80211_ATTR_TXQ_STATS,
-	NL80211_ATTR_TXQ_LIMIT,
-	NL80211_ATTR_TXQ_MEMORY_LIMIT,
-	NL80211_ATTR_TXQ_QUANTUM,
-
-	NL80211_ATTR_HE_CAPABILITY,
-
-	NL80211_ATTR_FTM_RESPONDER,
-
-	NL80211_ATTR_FTM_RESPONDER_STATS,
-
-	NL80211_ATTR_TIMEOUT,
-
-	NL80211_ATTR_PEER_MEASUREMENTS,
-
-	NL80211_ATTR_AIRTIME_WEIGHT,
-	NL80211_ATTR_STA_TX_POWER_SETTING,
-	NL80211_ATTR_STA_TX_POWER,
-
-	NL80211_ATTR_SAE_PASSWORD,
-
-	NL80211_ATTR_TWT_RESPONDER,
-
-	NL80211_ATTR_HE_OBSS_PD,
-
-	NL80211_ATTR_WIPHY_EDMG_CHANNELS,
-	NL80211_ATTR_WIPHY_EDMG_BW_CONFIG,
-
-	NL80211_ATTR_VLAN_ID,
-
-	NL80211_ATTR_HE_BSS_COLOR,
-
-	NL80211_ATTR_IFTYPE_AKM_SUITES,
-
-	NL80211_ATTR_TID_CONFIG,
-
-	NL80211_ATTR_CONTROL_PORT_NO_PREAUTH,
-
-	NL80211_ATTR_PMK_LIFETIME,
-	NL80211_ATTR_PMK_REAUTH_THRESHOLD,
-
-	/* add attributes here, update the policy in nl80211.c */
-
-	__NL80211_ATTR_AFTER_LAST,
-	NUM_NL80211_ATTR = __NL80211_ATTR_AFTER_LAST,
-	NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1
-};
-
-/* source-level API compatibility */
-#define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION
-#define	NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG
-#define NL80211_ATTR_IFACE_SOCKET_OWNER NL80211_ATTR_SOCKET_OWNER
-#define NL80211_ATTR_SAE_DATA NL80211_ATTR_AUTH_DATA
-
-/*
- * Allow user space programs to use #ifdef on new attributes by defining them
- * here
- */
-#define NL80211_CMD_CONNECT NL80211_CMD_CONNECT
-#define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY
-#define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES
-#define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS
-#define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ
-#define NL80211_ATTR_WIPHY_CHANNEL_TYPE NL80211_ATTR_WIPHY_CHANNEL_TYPE
-#define NL80211_ATTR_MGMT_SUBTYPE NL80211_ATTR_MGMT_SUBTYPE
-#define NL80211_ATTR_IE NL80211_ATTR_IE
-#define NL80211_ATTR_REG_INITIATOR NL80211_ATTR_REG_INITIATOR
-#define NL80211_ATTR_REG_TYPE NL80211_ATTR_REG_TYPE
-#define NL80211_ATTR_FRAME NL80211_ATTR_FRAME
-#define NL80211_ATTR_SSID NL80211_ATTR_SSID
-#define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE
-#define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE
-#define NL80211_ATTR_CIPHER_SUITES_PAIRWISE NL80211_ATTR_CIPHER_SUITES_PAIRWISE
-#define NL80211_ATTR_CIPHER_SUITE_GROUP NL80211_ATTR_CIPHER_SUITE_GROUP
-#define NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS
-#define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES
-#define NL80211_ATTR_KEY NL80211_ATTR_KEY
-#define NL80211_ATTR_KEYS NL80211_ATTR_KEYS
-#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS
-
-#define NL80211_WIPHY_NAME_MAXLEN		64
-
-#define NL80211_MAX_SUPP_RATES			32
-#define NL80211_MAX_SUPP_HT_RATES		77
-#define NL80211_MAX_SUPP_REG_RULES		128
-#define NL80211_TKIP_DATA_OFFSET_ENCR_KEY	0
-#define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY	16
-#define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY	24
-#define NL80211_HT_CAPABILITY_LEN		26
-#define NL80211_VHT_CAPABILITY_LEN		12
-#define NL80211_HE_MIN_CAPABILITY_LEN           16
-#define NL80211_HE_MAX_CAPABILITY_LEN           54
-#define NL80211_MAX_NR_CIPHER_SUITES		5
-#define NL80211_MAX_NR_AKM_SUITES		2
-
-#define NL80211_MIN_REMAIN_ON_CHANNEL_TIME	10
-
-/* default RSSI threshold for scan results if none specified. */
-#define NL80211_SCAN_RSSI_THOLD_OFF		-300
-
-#define NL80211_CQM_TXE_MAX_INTVL		1800
-
-/**
- * enum nl80211_iftype - (virtual) interface types
- *
- * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides
- * @NL80211_IFTYPE_ADHOC: independent BSS member
- * @NL80211_IFTYPE_STATION: managed BSS member
- * @NL80211_IFTYPE_AP: access point
- * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points; VLAN interfaces
- *	are a bit special in that they must always be tied to a pre-existing
- *	AP type interface.
- * @NL80211_IFTYPE_WDS: wireless distribution interface
- * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames
- * @NL80211_IFTYPE_MESH_POINT: mesh point
- * @NL80211_IFTYPE_P2P_CLIENT: P2P client
- * @NL80211_IFTYPE_P2P_GO: P2P group owner
- * @NL80211_IFTYPE_P2P_DEVICE: P2P device interface type, this is not a netdev
- *	and therefore can't be created in the normal ways, use the
- *	%NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE
- *	commands to create and destroy one
- * @NL80211_IF_TYPE_OCB: Outside Context of a BSS
- *	This mode corresponds to the MIB variable dot11OCBActivated=true
- * @NL80211_IFTYPE_NAN: NAN device interface type (not a netdev)
- * @NL80211_IFTYPE_MAX: highest interface type number currently defined
- * @NUM_NL80211_IFTYPES: number of defined interface types
- *
- * These values are used with the %NL80211_ATTR_IFTYPE
- * to set the type of an interface.
- *
- */
-enum nl80211_iftype {
-	NL80211_IFTYPE_UNSPECIFIED,
-	NL80211_IFTYPE_ADHOC,
-	NL80211_IFTYPE_STATION,
-	NL80211_IFTYPE_AP,
-	NL80211_IFTYPE_AP_VLAN,
-	NL80211_IFTYPE_WDS,
-	NL80211_IFTYPE_MONITOR,
-	NL80211_IFTYPE_MESH_POINT,
-	NL80211_IFTYPE_P2P_CLIENT,
-	NL80211_IFTYPE_P2P_GO,
-	NL80211_IFTYPE_P2P_DEVICE,
-	NL80211_IFTYPE_OCB,
-	NL80211_IFTYPE_NAN,
-
-	/* keep last */
-	NUM_NL80211_IFTYPES,
-	NL80211_IFTYPE_MAX = NUM_NL80211_IFTYPES - 1
-};
-
-/**
- * enum nl80211_sta_flags - station flags
- *
- * Station flags. When a station is added to an AP interface, it is
- * assumed to be already associated (and hence authenticated.)
- *
- * @__NL80211_STA_FLAG_INVALID: attribute number 0 is reserved
- * @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X)
- * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames
- *	with short barker preamble
- * @NL80211_STA_FLAG_WME: station is WME/QoS capable
- * @NL80211_STA_FLAG_MFP: station uses management frame protection
- * @NL80211_STA_FLAG_AUTHENTICATED: station is authenticated
- * @NL80211_STA_FLAG_TDLS_PEER: station is a TDLS peer -- this flag should
- *	only be used in managed mode (even in the flags mask). Note that the
- *	flag can't be changed, it is only valid while adding a station, and
- *	attempts to change it will silently be ignored (rather than rejected
- *	as errors.)
- * @NL80211_STA_FLAG_ASSOCIATED: station is associated; used with drivers
- *	that support %NL80211_FEATURE_FULL_AP_CLIENT_STATE to transition a
- *	previously added station into associated state
- * @NL80211_STA_FLAG_MAX: highest station flag number currently defined
- * @__NL80211_STA_FLAG_AFTER_LAST: internal use
- */
-enum nl80211_sta_flags {
-	__NL80211_STA_FLAG_INVALID,
-	NL80211_STA_FLAG_AUTHORIZED,
-	NL80211_STA_FLAG_SHORT_PREAMBLE,
-	NL80211_STA_FLAG_WME,
-	NL80211_STA_FLAG_MFP,
-	NL80211_STA_FLAG_AUTHENTICATED,
-	NL80211_STA_FLAG_TDLS_PEER,
-	NL80211_STA_FLAG_ASSOCIATED,
-
-	/* keep last */
-	__NL80211_STA_FLAG_AFTER_LAST,
-	NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_sta_p2p_ps_status - station support of P2P PS
- *
- * @NL80211_P2P_PS_UNSUPPORTED: station doesn't support P2P PS mechanism
- * @@NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism
- * @NUM_NL80211_P2P_PS_STATUS: number of values
- */
-enum nl80211_sta_p2p_ps_status {
-	NL80211_P2P_PS_UNSUPPORTED = 0,
-	NL80211_P2P_PS_SUPPORTED,
-
-	NUM_NL80211_P2P_PS_STATUS,
-};
-
-#define NL80211_STA_FLAG_MAX_OLD_API	NL80211_STA_FLAG_TDLS_PEER
-
-/**
- * struct nl80211_sta_flag_update - station flags mask/set
- * @mask: mask of station flags to set
- * @set: which values to set them to
- *
- * Both mask and set contain bits as per &enum nl80211_sta_flags.
- */
-struct nl80211_sta_flag_update {
-	__u32 mask;
-	__u32 set;
-} __attribute__((packed));
-
-/**
- * enum nl80211_he_gi - HE guard interval
- * @NL80211_RATE_INFO_HE_GI_0_8: 0.8 usec
- * @NL80211_RATE_INFO_HE_GI_1_6: 1.6 usec
- * @NL80211_RATE_INFO_HE_GI_3_2: 3.2 usec
- */
-enum nl80211_he_gi {
-	NL80211_RATE_INFO_HE_GI_0_8,
-	NL80211_RATE_INFO_HE_GI_1_6,
-	NL80211_RATE_INFO_HE_GI_3_2,
-};
-
-/**
- * enum nl80211_he_ru_alloc - HE RU allocation values
- * @NL80211_RATE_INFO_HE_RU_ALLOC_26: 26-tone RU allocation
- * @NL80211_RATE_INFO_HE_RU_ALLOC_52: 52-tone RU allocation
- * @NL80211_RATE_INFO_HE_RU_ALLOC_106: 106-tone RU allocation
- * @NL80211_RATE_INFO_HE_RU_ALLOC_242: 242-tone RU allocation
- * @NL80211_RATE_INFO_HE_RU_ALLOC_484: 484-tone RU allocation
- * @NL80211_RATE_INFO_HE_RU_ALLOC_996: 996-tone RU allocation
- * @NL80211_RATE_INFO_HE_RU_ALLOC_2x996: 2x996-tone RU allocation
- */
-enum nl80211_he_ru_alloc {
-	NL80211_RATE_INFO_HE_RU_ALLOC_26,
-	NL80211_RATE_INFO_HE_RU_ALLOC_52,
-	NL80211_RATE_INFO_HE_RU_ALLOC_106,
-	NL80211_RATE_INFO_HE_RU_ALLOC_242,
-	NL80211_RATE_INFO_HE_RU_ALLOC_484,
-	NL80211_RATE_INFO_HE_RU_ALLOC_996,
-	NL80211_RATE_INFO_HE_RU_ALLOC_2x996,
-};
-
-/**
- * enum nl80211_rate_info - bitrate information
- *
- * These attribute types are used with %NL80211_STA_INFO_TXRATE
- * when getting information about the bitrate of a station.
- * There are 2 attributes for bitrate, a legacy one that represents
- * a 16-bit value, and new one that represents a 32-bit value.
- * If the rate value fits into 16 bit, both attributes are reported
- * with the same value. If the rate is too high to fit into 16 bits
- * (>6.5535Gbps) only 32-bit attribute is included.
- * User space tools encouraged to use the 32-bit attribute and fall
- * back to the 16-bit one for compatibility with older kernels.
- *
- * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved
- * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s)
- * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8)
- * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 MHz dualchannel bitrate
- * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval
- * @NL80211_RATE_INFO_BITRATE32: total bitrate (u32, 100kbit/s)
- * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined
- * @NL80211_RATE_INFO_VHT_MCS: MCS index for VHT (u8)
- * @NL80211_RATE_INFO_VHT_NSS: number of streams in VHT (u8)
- * @NL80211_RATE_INFO_80_MHZ_WIDTH: 80 MHz VHT rate
- * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: unused - 80+80 is treated the
- *	same as 160 for purposes of the bitrates
- * @NL80211_RATE_INFO_160_MHZ_WIDTH: 160 MHz VHT rate
- * @NL80211_RATE_INFO_10_MHZ_WIDTH: 10 MHz width - note that this is
- *	a legacy rate and will be reported as the actual bitrate, i.e.
- *	half the base (20 MHz) rate
- * @NL80211_RATE_INFO_5_MHZ_WIDTH: 5 MHz width - note that this is
- *	a legacy rate and will be reported as the actual bitrate, i.e.
- *	a quarter of the base (20 MHz) rate
- * @NL80211_RATE_INFO_HE_MCS: HE MCS index (u8, 0-11)
- * @NL80211_RATE_INFO_HE_NSS: HE NSS value (u8, 1-8)
- * @NL80211_RATE_INFO_HE_GI: HE guard interval identifier
- *	(u8, see &enum nl80211_he_gi)
- * @NL80211_RATE_INFO_HE_DCM: HE DCM value (u8, 0/1)
- * @NL80211_RATE_INFO_RU_ALLOC: HE RU allocation, if not present then
- *	non-OFDMA was used (u8, see &enum nl80211_he_ru_alloc)
- * @__NL80211_RATE_INFO_AFTER_LAST: internal use
- */
-enum nl80211_rate_info {
-	__NL80211_RATE_INFO_INVALID,
-	NL80211_RATE_INFO_BITRATE,
-	NL80211_RATE_INFO_MCS,
-	NL80211_RATE_INFO_40_MHZ_WIDTH,
-	NL80211_RATE_INFO_SHORT_GI,
-	NL80211_RATE_INFO_BITRATE32,
-	NL80211_RATE_INFO_VHT_MCS,
-	NL80211_RATE_INFO_VHT_NSS,
-	NL80211_RATE_INFO_80_MHZ_WIDTH,
-	NL80211_RATE_INFO_80P80_MHZ_WIDTH,
-	NL80211_RATE_INFO_160_MHZ_WIDTH,
-	NL80211_RATE_INFO_10_MHZ_WIDTH,
-	NL80211_RATE_INFO_5_MHZ_WIDTH,
-	NL80211_RATE_INFO_HE_MCS,
-	NL80211_RATE_INFO_HE_NSS,
-	NL80211_RATE_INFO_HE_GI,
-	NL80211_RATE_INFO_HE_DCM,
-	NL80211_RATE_INFO_HE_RU_ALLOC,
-
-	/* keep last */
-	__NL80211_RATE_INFO_AFTER_LAST,
-	NL80211_RATE_INFO_MAX = __NL80211_RATE_INFO_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_sta_bss_param - BSS information collected by STA
- *
- * These attribute types are used with %NL80211_STA_INFO_BSS_PARAM
- * when getting information about the bitrate of a station.
- *
- * @__NL80211_STA_BSS_PARAM_INVALID: attribute number 0 is reserved
- * @NL80211_STA_BSS_PARAM_CTS_PROT: whether CTS protection is enabled (flag)
- * @NL80211_STA_BSS_PARAM_SHORT_PREAMBLE:  whether short preamble is enabled
- *	(flag)
- * @NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME:  whether short slot time is enabled
- *	(flag)
- * @NL80211_STA_BSS_PARAM_DTIM_PERIOD: DTIM period for beaconing (u8)
- * @NL80211_STA_BSS_PARAM_BEACON_INTERVAL: Beacon interval (u16)
- * @NL80211_STA_BSS_PARAM_MAX: highest sta_bss_param number currently defined
- * @__NL80211_STA_BSS_PARAM_AFTER_LAST: internal use
- */
-enum nl80211_sta_bss_param {
-	__NL80211_STA_BSS_PARAM_INVALID,
-	NL80211_STA_BSS_PARAM_CTS_PROT,
-	NL80211_STA_BSS_PARAM_SHORT_PREAMBLE,
-	NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME,
-	NL80211_STA_BSS_PARAM_DTIM_PERIOD,
-	NL80211_STA_BSS_PARAM_BEACON_INTERVAL,
-
-	/* keep last */
-	__NL80211_STA_BSS_PARAM_AFTER_LAST,
-	NL80211_STA_BSS_PARAM_MAX = __NL80211_STA_BSS_PARAM_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_sta_info - station information
- *
- * These attribute types are used with %NL80211_ATTR_STA_INFO
- * when getting information about a station.
- *
- * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved
- * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)
- * @NL80211_STA_INFO_RX_BYTES: total received bytes (MPDU length)
- *	(u32, from this station)
- * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (MPDU length)
- *	(u32, to this station)
- * @NL80211_STA_INFO_RX_BYTES64: total received bytes (MPDU length)
- *	(u64, from this station)
- * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (MPDU length)
- *	(u64, to this station)
- * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
- * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
- * 	containing info as possible, see &enum nl80211_rate_info
- * @NL80211_STA_INFO_RX_PACKETS: total received packet (MSDUs and MMPDUs)
- *	(u32, from this station)
- * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (MSDUs and MMPDUs)
- *	(u32, to this station)
- * @NL80211_STA_INFO_TX_RETRIES: total retries (MPDUs) (u32, to this station)
- * @NL80211_STA_INFO_TX_FAILED: total failed packets (MPDUs)
- *	(u32, to this station)
- * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm)
- * @NL80211_STA_INFO_LLID: the station's mesh LLID
- * @NL80211_STA_INFO_PLID: the station's mesh PLID
- * @NL80211_STA_INFO_PLINK_STATE: peer link state for the station
- *	(see %enum nl80211_plink_state)
- * @NL80211_STA_INFO_RX_BITRATE: last unicast data frame rx rate, nested
- *	attribute, like NL80211_STA_INFO_TX_BITRATE.
- * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute
- *     containing info as possible, see &enum nl80211_sta_bss_param
- * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected
- * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update.
- * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32)
- * @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64)
- * @NL80211_STA_INFO_LOCAL_PM: local mesh STA link-specific power mode
- * @NL80211_STA_INFO_PEER_PM: peer mesh STA link-specific power mode
- * @NL80211_STA_INFO_NONPEER_PM: neighbor mesh STA power save mode towards
- *	non-peer STA
- * @NL80211_STA_INFO_CHAIN_SIGNAL: per-chain signal strength of last PPDU
- *	Contains a nested array of signal strength attributes (u8, dBm)
- * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average
- *	Same format as NL80211_STA_INFO_CHAIN_SIGNAL.
- * @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the
- *	802.11 header (u32, kbps)
- * @NL80211_STA_INFO_RX_DROP_MISC: RX packets dropped for unspecified reasons
- *	(u64)
- * @NL80211_STA_INFO_BEACON_RX: number of beacons received from this peer (u64)
- * @NL80211_STA_INFO_BEACON_SIGNAL_AVG: signal strength average
- *	for beacons only (u8, dBm)
- * @NL80211_STA_INFO_TID_STATS: per-TID statistics (see &enum nl80211_tid_stats)
- *	This is a nested attribute where each the inner attribute number is the
- *	TID+1 and the special TID 16 (i.e. value 17) is used for non-QoS frames;
- *	each one of those is again nested with &enum nl80211_tid_stats
- *	attributes carrying the actual values.
- * @NL80211_STA_INFO_RX_DURATION: aggregate PPDU duration for all frames
- *	received from the station (u64, usec)
- * @NL80211_STA_INFO_PAD: attribute used for padding for 64-bit alignment
- * @NL80211_STA_INFO_ACK_SIGNAL: signal strength of the last ACK frame(u8, dBm)
- * @NL80211_STA_INFO_ACK_SIGNAL_AVG: avg signal strength of ACK frames (s8, dBm)
- * @NL80211_STA_INFO_RX_MPDUS: total number of received packets (MPDUs)
- *	(u32, from this station)
- * @NL80211_STA_INFO_FCS_ERROR_COUNT: total number of packets (MPDUs) received
- *	with an FCS error (u32, from this station). This count may not include
- *	some packets with an FCS error due to TA corruption. Hence this counter
- *	might not be fully accurate.
- * @NL80211_STA_INFO_CONNECTED_TO_GATE: set to true if STA has a path to a
- *	mesh gate (u8, 0 or 1)
- * @NL80211_STA_INFO_TX_DURATION: aggregate PPDU duration for all frames
- *	sent to the station (u64, usec)
- * @NL80211_STA_INFO_AIRTIME_WEIGHT: current airtime weight for station (u16)
- * @NL80211_STA_INFO_AIRTIME_LINK_METRIC: airtime link metric for mesh station
- * @NL80211_STA_INFO_ASSOC_AT_BOOTTIME: Timestamp (CLOCK_BOOTTIME, nanoseconds)
- *	of STA's association
- * @__NL80211_STA_INFO_AFTER_LAST: internal
- * @NL80211_STA_INFO_MAX: highest possible station info attribute
- */
-enum nl80211_sta_info {
-	__NL80211_STA_INFO_INVALID,
-	NL80211_STA_INFO_INACTIVE_TIME,
-	NL80211_STA_INFO_RX_BYTES,
-	NL80211_STA_INFO_TX_BYTES,
-	NL80211_STA_INFO_LLID,
-	NL80211_STA_INFO_PLID,
-	NL80211_STA_INFO_PLINK_STATE,
-	NL80211_STA_INFO_SIGNAL,
-	NL80211_STA_INFO_TX_BITRATE,
-	NL80211_STA_INFO_RX_PACKETS,
-	NL80211_STA_INFO_TX_PACKETS,
-	NL80211_STA_INFO_TX_RETRIES,
-	NL80211_STA_INFO_TX_FAILED,
-	NL80211_STA_INFO_SIGNAL_AVG,
-	NL80211_STA_INFO_RX_BITRATE,
-	NL80211_STA_INFO_BSS_PARAM,
-	NL80211_STA_INFO_CONNECTED_TIME,
-	NL80211_STA_INFO_STA_FLAGS,
-	NL80211_STA_INFO_BEACON_LOSS,
-	NL80211_STA_INFO_T_OFFSET,
-	NL80211_STA_INFO_LOCAL_PM,
-	NL80211_STA_INFO_PEER_PM,
-	NL80211_STA_INFO_NONPEER_PM,
-	NL80211_STA_INFO_RX_BYTES64,
-	NL80211_STA_INFO_TX_BYTES64,
-	NL80211_STA_INFO_CHAIN_SIGNAL,
-	NL80211_STA_INFO_CHAIN_SIGNAL_AVG,
-	NL80211_STA_INFO_EXPECTED_THROUGHPUT,
-	NL80211_STA_INFO_RX_DROP_MISC,
-	NL80211_STA_INFO_BEACON_RX,
-	NL80211_STA_INFO_BEACON_SIGNAL_AVG,
-	NL80211_STA_INFO_TID_STATS,
-	NL80211_STA_INFO_RX_DURATION,
-	NL80211_STA_INFO_PAD,
-	NL80211_STA_INFO_ACK_SIGNAL,
-	NL80211_STA_INFO_ACK_SIGNAL_AVG,
-	NL80211_STA_INFO_RX_MPDUS,
-	NL80211_STA_INFO_FCS_ERROR_COUNT,
-	NL80211_STA_INFO_CONNECTED_TO_GATE,
-	NL80211_STA_INFO_TX_DURATION,
-	NL80211_STA_INFO_AIRTIME_WEIGHT,
-	NL80211_STA_INFO_AIRTIME_LINK_METRIC,
-	NL80211_STA_INFO_ASSOC_AT_BOOTTIME,
-
-	/* keep last */
-	__NL80211_STA_INFO_AFTER_LAST,
-	NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1
-};
-
-/* we renamed this - stay compatible */
-#define NL80211_STA_INFO_DATA_ACK_SIGNAL_AVG NL80211_STA_INFO_ACK_SIGNAL_AVG
-
-
-/**
- * enum nl80211_tid_stats - per TID statistics attributes
- * @__NL80211_TID_STATS_INVALID: attribute number 0 is reserved
- * @NL80211_TID_STATS_RX_MSDU: number of MSDUs received (u64)
- * @NL80211_TID_STATS_TX_MSDU: number of MSDUs transmitted (or
- *	attempted to transmit; u64)
- * @NL80211_TID_STATS_TX_MSDU_RETRIES: number of retries for
- *	transmitted MSDUs (not counting the first attempt; u64)
- * @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted
- *	MSDUs (u64)
- * @NL80211_TID_STATS_PAD: attribute used for padding for 64-bit alignment
- * @NL80211_TID_STATS_TXQ_STATS: TXQ stats (nested attribute)
- * @NUM_NL80211_TID_STATS: number of attributes here
- * @NL80211_TID_STATS_MAX: highest numbered attribute here
- */
-enum nl80211_tid_stats {
-	__NL80211_TID_STATS_INVALID,
-	NL80211_TID_STATS_RX_MSDU,
-	NL80211_TID_STATS_TX_MSDU,
-	NL80211_TID_STATS_TX_MSDU_RETRIES,
-	NL80211_TID_STATS_TX_MSDU_FAILED,
-	NL80211_TID_STATS_PAD,
-	NL80211_TID_STATS_TXQ_STATS,
-
-	/* keep last */
-	NUM_NL80211_TID_STATS,
-	NL80211_TID_STATS_MAX = NUM_NL80211_TID_STATS - 1
-};
-
-/**
- * enum nl80211_txq_stats - per TXQ statistics attributes
- * @__NL80211_TXQ_STATS_INVALID: attribute number 0 is reserved
- * @NUM_NL80211_TXQ_STATS: number of attributes here
- * @NL80211_TXQ_STATS_BACKLOG_BYTES: number of bytes currently backlogged
- * @NL80211_TXQ_STATS_BACKLOG_PACKETS: number of packets currently
- *      backlogged
- * @NL80211_TXQ_STATS_FLOWS: total number of new flows seen
- * @NL80211_TXQ_STATS_DROPS: total number of packet drops
- * @NL80211_TXQ_STATS_ECN_MARKS: total number of packet ECN marks
- * @NL80211_TXQ_STATS_OVERLIMIT: number of drops due to queue space overflow
- * @NL80211_TXQ_STATS_OVERMEMORY: number of drops due to memory limit overflow
- *      (only for per-phy stats)
- * @NL80211_TXQ_STATS_COLLISIONS: number of hash collisions
- * @NL80211_TXQ_STATS_TX_BYTES: total number of bytes dequeued from TXQ
- * @NL80211_TXQ_STATS_TX_PACKETS: total number of packets dequeued from TXQ
- * @NL80211_TXQ_STATS_MAX_FLOWS: number of flow buckets for PHY
- * @NL80211_TXQ_STATS_MAX: highest numbered attribute here
- */
-enum nl80211_txq_stats {
-	__NL80211_TXQ_STATS_INVALID,
-	NL80211_TXQ_STATS_BACKLOG_BYTES,
-	NL80211_TXQ_STATS_BACKLOG_PACKETS,
-	NL80211_TXQ_STATS_FLOWS,
-	NL80211_TXQ_STATS_DROPS,
-	NL80211_TXQ_STATS_ECN_MARKS,
-	NL80211_TXQ_STATS_OVERLIMIT,
-	NL80211_TXQ_STATS_OVERMEMORY,
-	NL80211_TXQ_STATS_COLLISIONS,
-	NL80211_TXQ_STATS_TX_BYTES,
-	NL80211_TXQ_STATS_TX_PACKETS,
-	NL80211_TXQ_STATS_MAX_FLOWS,
-
-	/* keep last */
-	NUM_NL80211_TXQ_STATS,
-	NL80211_TXQ_STATS_MAX = NUM_NL80211_TXQ_STATS - 1
-};
-
-/**
- * enum nl80211_mpath_flags - nl80211 mesh path flags
- *
- * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active
- * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running
- * @NL80211_MPATH_FLAG_SN_VALID: the mesh path contains a valid SN
- * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set
- * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded
- */
-enum nl80211_mpath_flags {
-	NL80211_MPATH_FLAG_ACTIVE =	1<<0,
-	NL80211_MPATH_FLAG_RESOLVING =	1<<1,
-	NL80211_MPATH_FLAG_SN_VALID =	1<<2,
-	NL80211_MPATH_FLAG_FIXED =	1<<3,
-	NL80211_MPATH_FLAG_RESOLVED =	1<<4,
-};
-
-/**
- * enum nl80211_mpath_info - mesh path information
- *
- * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting
- * information about a mesh path.
- *
- * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved
- * @NL80211_MPATH_INFO_FRAME_QLEN: number of queued frames for this destination
- * @NL80211_MPATH_INFO_SN: destination sequence number
- * @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path
- * @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now
- * @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in
- * 	&enum nl80211_mpath_flags;
- * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec
- * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries
- * @NL80211_MPATH_INFO_HOP_COUNT: hop count to destination
- * @NL80211_MPATH_INFO_PATH_CHANGE: total number of path changes to destination
- * @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number
- *	currently defined
- * @__NL80211_MPATH_INFO_AFTER_LAST: internal use
- */
-enum nl80211_mpath_info {
-	__NL80211_MPATH_INFO_INVALID,
-	NL80211_MPATH_INFO_FRAME_QLEN,
-	NL80211_MPATH_INFO_SN,
-	NL80211_MPATH_INFO_METRIC,
-	NL80211_MPATH_INFO_EXPTIME,
-	NL80211_MPATH_INFO_FLAGS,
-	NL80211_MPATH_INFO_DISCOVERY_TIMEOUT,
-	NL80211_MPATH_INFO_DISCOVERY_RETRIES,
-	NL80211_MPATH_INFO_HOP_COUNT,
-	NL80211_MPATH_INFO_PATH_CHANGE,
-
-	/* keep last */
-	__NL80211_MPATH_INFO_AFTER_LAST,
-	NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_band_iftype_attr - Interface type data attributes
- *
- * @__NL80211_BAND_IFTYPE_ATTR_INVALID: attribute number 0 is reserved
- * @NL80211_BAND_IFTYPE_ATTR_IFTYPES: nested attribute containing a flag attribute
- *     for each interface type that supports the band data
- * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC: HE MAC capabilities as in HE
- *     capabilities IE
- * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY: HE PHY capabilities as in HE
- *     capabilities IE
- * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET: HE supported NSS/MCS as in HE
- *     capabilities IE
- * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE: HE PPE thresholds information as
- *     defined in HE capabilities IE
- * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band HE capability attribute currently
- *     defined
- * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use
- */
-enum nl80211_band_iftype_attr {
-	__NL80211_BAND_IFTYPE_ATTR_INVALID,
-
-	NL80211_BAND_IFTYPE_ATTR_IFTYPES,
-	NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC,
-	NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY,
-	NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET,
-	NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE,
-
-	/* keep last */
-	__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST,
-	NL80211_BAND_IFTYPE_ATTR_MAX = __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_band_attr - band attributes
- * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved
- * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band,
- *	an array of nested frequency attributes
- * @NL80211_BAND_ATTR_RATES: supported bitrates in this band,
- *	an array of nested bitrate attributes
- * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as
- *	defined in 802.11n
- * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE
- * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n
- * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n
- * @NL80211_BAND_ATTR_VHT_MCS_SET: 32-byte attribute containing the MCS set as
- *	defined in 802.11ac
- * @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE
- * @NL80211_BAND_ATTR_IFTYPE_DATA: nested array attribute, with each entry using
- *	attributes from &enum nl80211_band_iftype_attr
- * @NL80211_BAND_ATTR_EDMG_CHANNELS: bitmap that indicates the 2.16 GHz
- *	channel(s) that are allowed to be used for EDMG transmissions.
- *	Defined by IEEE P802.11ay/D4.0 section 9.4.2.251.
- * @NL80211_BAND_ATTR_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes
- *	the allowed channel bandwidth configurations.
- *	Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13.
- * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined
- * @__NL80211_BAND_ATTR_AFTER_LAST: internal use
- */
-enum nl80211_band_attr {
-	__NL80211_BAND_ATTR_INVALID,
-	NL80211_BAND_ATTR_FREQS,
-	NL80211_BAND_ATTR_RATES,
-
-	NL80211_BAND_ATTR_HT_MCS_SET,
-	NL80211_BAND_ATTR_HT_CAPA,
-	NL80211_BAND_ATTR_HT_AMPDU_FACTOR,
-	NL80211_BAND_ATTR_HT_AMPDU_DENSITY,
-
-	NL80211_BAND_ATTR_VHT_MCS_SET,
-	NL80211_BAND_ATTR_VHT_CAPA,
-	NL80211_BAND_ATTR_IFTYPE_DATA,
-
-	NL80211_BAND_ATTR_EDMG_CHANNELS,
-	NL80211_BAND_ATTR_EDMG_BW_CONFIG,
-
-	/* keep last */
-	__NL80211_BAND_ATTR_AFTER_LAST,
-	NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1
-};
-
-#define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA
-
-/**
- * enum nl80211_wmm_rule - regulatory wmm rule
- *
- * @__NL80211_WMMR_INVALID: attribute number 0 is reserved
- * @NL80211_WMMR_CW_MIN: Minimum contention window slot.
- * @NL80211_WMMR_CW_MAX: Maximum contention window slot.
- * @NL80211_WMMR_AIFSN: Arbitration Inter Frame Space.
- * @NL80211_WMMR_TXOP: Maximum allowed tx operation time.
- * @nl80211_WMMR_MAX: highest possible wmm rule.
- * @__NL80211_WMMR_LAST: Internal use.
- */
-enum nl80211_wmm_rule {
-	__NL80211_WMMR_INVALID,
-	NL80211_WMMR_CW_MIN,
-	NL80211_WMMR_CW_MAX,
-	NL80211_WMMR_AIFSN,
-	NL80211_WMMR_TXOP,
-
-	/* keep last */
-	__NL80211_WMMR_LAST,
-	NL80211_WMMR_MAX = __NL80211_WMMR_LAST - 1
-};
-
-/**
- * enum nl80211_frequency_attr - frequency attributes
- * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved
- * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz
- * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current
- *	regulatory domain.
- * @NL80211_FREQUENCY_ATTR_NO_IR: no mechanisms that initiate radiation
- * 	are permitted on this channel, this includes sending probe
- * 	requests, or modes of operation that require beaconing.
- * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory
- *	on this channel in current regulatory domain.
- * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm
- *	(100 * dBm).
- * @NL80211_FREQUENCY_ATTR_DFS_STATE: current state for DFS
- *	(enum nl80211_dfs_state)
- * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in miliseconds for how long
- *	this channel is in this DFS state.
- * @NL80211_FREQUENCY_ATTR_NO_HT40_MINUS: HT40- isn't possible with this
- *	channel as the control channel
- * @NL80211_FREQUENCY_ATTR_NO_HT40_PLUS: HT40+ isn't possible with this
- *	channel as the control channel
- * @NL80211_FREQUENCY_ATTR_NO_80MHZ: any 80 MHz channel using this channel
- *	as the primary or any of the secondary channels isn't possible,
- *	this includes 80+80 channels
- * @NL80211_FREQUENCY_ATTR_NO_160MHZ: any 160 MHz (but not 80+80) channel
- *	using this channel as the primary or any of the secondary channels
- *	isn't possible
- * @NL80211_FREQUENCY_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.
- * @NL80211_FREQUENCY_ATTR_INDOOR_ONLY: Only indoor use is permitted on this
- *	channel. A channel that has the INDOOR_ONLY attribute can only be
- *	used when there is a clear assessment that the device is operating in
- *	an indoor surroundings, i.e., it is connected to AC power (and not
- *	through portable DC inverters) or is under the control of a master
- *	that is acting as an AP and is connected to AC power.
- * @NL80211_FREQUENCY_ATTR_IR_CONCURRENT: IR operation is allowed on this
- *	channel if it's connected concurrently to a BSS on the same channel on
- *	the 2 GHz band or to a channel in the same UNII band (on the 5 GHz
- *	band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO or TDLS
- *	off-channel on a channel that has the IR_CONCURRENT attribute set can be
- *	done when there is a clear assessment that the device is operating under
- *	the guidance of an authorized master, i.e., setting up a GO or TDLS
- *	off-channel while the device is also connected to an AP with DFS and
- *	radar detection on the UNII band (it is up to user-space, i.e.,
- *	wpa_supplicant to perform the required verifications). Using this
- *	attribute for IR is disallowed for master interfaces (IBSS, AP).
- * @NL80211_FREQUENCY_ATTR_NO_20MHZ: 20 MHz operation is not allowed
- *	on this channel in current regulatory domain.
- * @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed
- *	on this channel in current regulatory domain.
- * @NL80211_FREQUENCY_ATTR_WMM: this channel has wmm limitations.
- *	This is a nested attribute that contains the wmm limitation per AC.
- *	(see &enum nl80211_wmm_rule)
- * @NL80211_FREQUENCY_ATTR_NO_HE: HE operation is not allowed on this channel
- *	in current regulatory domain.
- * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
- *	currently defined
- * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
- *
- * See https://apps.fcc.gov/eas/comments/GetPublishedDocument.html?id=327&tn=528122
- * for more information on the FCC description of the relaxations allowed
- * by NL80211_FREQUENCY_ATTR_INDOOR_ONLY and
- * NL80211_FREQUENCY_ATTR_IR_CONCURRENT.
- */
-enum nl80211_frequency_attr {
-	__NL80211_FREQUENCY_ATTR_INVALID,
-	NL80211_FREQUENCY_ATTR_FREQ,
-	NL80211_FREQUENCY_ATTR_DISABLED,
-	NL80211_FREQUENCY_ATTR_NO_IR,
-	__NL80211_FREQUENCY_ATTR_NO_IBSS,
-	NL80211_FREQUENCY_ATTR_RADAR,
-	NL80211_FREQUENCY_ATTR_MAX_TX_POWER,
-	NL80211_FREQUENCY_ATTR_DFS_STATE,
-	NL80211_FREQUENCY_ATTR_DFS_TIME,
-	NL80211_FREQUENCY_ATTR_NO_HT40_MINUS,
-	NL80211_FREQUENCY_ATTR_NO_HT40_PLUS,
-	NL80211_FREQUENCY_ATTR_NO_80MHZ,
-	NL80211_FREQUENCY_ATTR_NO_160MHZ,
-	NL80211_FREQUENCY_ATTR_DFS_CAC_TIME,
-	NL80211_FREQUENCY_ATTR_INDOOR_ONLY,
-	NL80211_FREQUENCY_ATTR_IR_CONCURRENT,
-	NL80211_FREQUENCY_ATTR_NO_20MHZ,
-	NL80211_FREQUENCY_ATTR_NO_10MHZ,
-	NL80211_FREQUENCY_ATTR_WMM,
-	NL80211_FREQUENCY_ATTR_NO_HE,
-
-	/* keep last */
-	__NL80211_FREQUENCY_ATTR_AFTER_LAST,
-	NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1
-};
-
-#define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER
-#define NL80211_FREQUENCY_ATTR_PASSIVE_SCAN	NL80211_FREQUENCY_ATTR_NO_IR
-#define NL80211_FREQUENCY_ATTR_NO_IBSS		NL80211_FREQUENCY_ATTR_NO_IR
-#define NL80211_FREQUENCY_ATTR_NO_IR		NL80211_FREQUENCY_ATTR_NO_IR
-#define NL80211_FREQUENCY_ATTR_GO_CONCURRENT \
-					NL80211_FREQUENCY_ATTR_IR_CONCURRENT
-
-/**
- * enum nl80211_bitrate_attr - bitrate attributes
- * @__NL80211_BITRATE_ATTR_INVALID: attribute number 0 is reserved
- * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps
- * @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported
- *	in 2.4 GHz band.
- * @NL80211_BITRATE_ATTR_MAX: highest bitrate attribute number
- *	currently defined
- * @__NL80211_BITRATE_ATTR_AFTER_LAST: internal use
- */
-enum nl80211_bitrate_attr {
-	__NL80211_BITRATE_ATTR_INVALID,
-	NL80211_BITRATE_ATTR_RATE,
-	NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE,
-
-	/* keep last */
-	__NL80211_BITRATE_ATTR_AFTER_LAST,
-	NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_initiator - Indicates the initiator of a reg domain request
- * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world
- * 	regulatory domain.
- * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the
- * 	regulatory domain.
- * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the
- * 	wireless core it thinks its knows the regulatory domain we should be in.
- * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an
- * 	802.11 country information element with regulatory information it
- * 	thinks we should consider. cfg80211 only processes the country
- *	code from the IE, and relies on the regulatory domain information
- *	structure passed by userspace (CRDA) from our wireless-regdb.
- *	If a channel is enabled but the country code indicates it should
- *	be disabled we disable the channel and re-enable it upon disassociation.
- */
-enum nl80211_reg_initiator {
-	NL80211_REGDOM_SET_BY_CORE,
-	NL80211_REGDOM_SET_BY_USER,
-	NL80211_REGDOM_SET_BY_DRIVER,
-	NL80211_REGDOM_SET_BY_COUNTRY_IE,
-};
-
-/**
- * enum nl80211_reg_type - specifies the type of regulatory domain
- * @NL80211_REGDOM_TYPE_COUNTRY: the regulatory domain set is one that pertains
- *	to a specific country. When this is set you can count on the
- *	ISO / IEC 3166 alpha2 country code being valid.
- * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory
- * 	domain.
- * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom
- * 	driver specific world regulatory domain. These do not apply system-wide
- * 	and are only applicable to the individual devices which have requested
- * 	them to be applied.
- * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product
- *	of an intersection between two regulatory domains -- the previously
- *	set regulatory domain on the system and the last accepted regulatory
- *	domain request to be processed.
- */
-enum nl80211_reg_type {
-	NL80211_REGDOM_TYPE_COUNTRY,
-	NL80211_REGDOM_TYPE_WORLD,
-	NL80211_REGDOM_TYPE_CUSTOM_WORLD,
-	NL80211_REGDOM_TYPE_INTERSECTION,
-};
-
-/**
- * enum nl80211_reg_rule_attr - regulatory rule attributes
- * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved
- * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional
- * 	considerations for a given frequency range. These are the
- * 	&enum nl80211_reg_rule_flags.
- * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory
- * 	rule in KHz. This is not a center of frequency but an actual regulatory
- * 	band edge.
- * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule
- * 	in KHz. This is not a center a frequency but an actual regulatory
- * 	band edge.
- * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this
- *	frequency range, in KHz.
- * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain
- * 	for a given frequency range. The value is in mBi (100 * dBi).
- * 	If you don't have one then don't send this.
- * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for
- * 	a given frequency range. The value is in mBm (100 * dBm).
- * @NL80211_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.
- *	If not present or 0 default CAC time will be used.
- * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number
- *	currently defined
- * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use
- */
-enum nl80211_reg_rule_attr {
-	__NL80211_REG_RULE_ATTR_INVALID,
-	NL80211_ATTR_REG_RULE_FLAGS,
-
-	NL80211_ATTR_FREQ_RANGE_START,
-	NL80211_ATTR_FREQ_RANGE_END,
-	NL80211_ATTR_FREQ_RANGE_MAX_BW,
-
-	NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN,
-	NL80211_ATTR_POWER_RULE_MAX_EIRP,
-
-	NL80211_ATTR_DFS_CAC_TIME,
-
-	/* keep last */
-	__NL80211_REG_RULE_ATTR_AFTER_LAST,
-	NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_sched_scan_match_attr - scheduled scan match attributes
- * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved
- * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching,
- *	only report BSS with matching SSID.
- *	(This cannot be used together with BSSID.)
- * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a
- *	BSS in scan results. Filtering is turned off if not specified. Note that
- *	if this attribute is in a match set of its own, then it is treated as
- *	the default value for all matchsets with an SSID, rather than being a
- *	matchset of its own without an RSSI filter. This is due to problems with
- *	how this API was implemented in the past. Also, due to the same problem,
- *	the only way to create a matchset with only an RSSI filter (with this
- *	attribute) is if there's only a single matchset with the RSSI attribute.
- * @NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI: Flag indicating whether
- *	%NL80211_SCHED_SCAN_MATCH_ATTR_RSSI to be used as absolute RSSI or
- *	relative to current bss's RSSI.
- * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST: When present the RSSI level for
- *	BSS-es in the specified band is to be adjusted before doing
- *	RSSI-based BSS selection. The attribute value is a packed structure
- *	value as specified by &struct nl80211_bss_select_rssi_adjust.
- * @NL80211_SCHED_SCAN_MATCH_ATTR_BSSID: BSSID to be used for matching
- *	(this cannot be used together with SSID).
- * @NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI: Nested attribute that carries the
- *	band specific minimum rssi thresholds for the bands defined in
- *	enum nl80211_band. The minimum rssi threshold value(s32) specific to a
- *	band shall be encapsulated in attribute with type value equals to one
- *	of the NL80211_BAND_* defined in enum nl80211_band. For example, the
- *	minimum rssi threshold value for 2.4GHZ band shall be encapsulated
- *	within an attribute of type NL80211_BAND_2GHZ. And one or more of such
- *	attributes will be nested within this attribute.
- * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
- *	attribute number currently defined
- * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
- */
-enum nl80211_sched_scan_match_attr {
-	__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID,
-
-	NL80211_SCHED_SCAN_MATCH_ATTR_SSID,
-	NL80211_SCHED_SCAN_MATCH_ATTR_RSSI,
-	NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI,
-	NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST,
-	NL80211_SCHED_SCAN_MATCH_ATTR_BSSID,
-	NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI,
-
-	/* keep last */
-	__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,
-	NL80211_SCHED_SCAN_MATCH_ATTR_MAX =
-		__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST - 1
-};
-
-/* only for backward compatibility */
-#define NL80211_ATTR_SCHED_SCAN_MATCH_SSID NL80211_SCHED_SCAN_MATCH_ATTR_SSID
-
-/**
- * enum nl80211_reg_rule_flags - regulatory rule flags
- *
- * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed
- * @NL80211_RRF_NO_CCK: CCK modulation not allowed
- * @NL80211_RRF_NO_INDOOR: indoor operation not allowed
- * @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed
- * @NL80211_RRF_DFS: DFS support is required to be used
- * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links
- * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links
- * @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed,
- * 	this includes probe requests or modes of operation that require
- * 	beaconing.
- * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated
- *	base on contiguous rules and wider channels will be allowed to cross
- *	multiple contiguous/overlapping frequency ranges.
- * @NL80211_RRF_IR_CONCURRENT: See %NL80211_FREQUENCY_ATTR_IR_CONCURRENT
- * @NL80211_RRF_NO_HT40MINUS: channels can't be used in HT40- operation
- * @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation
- * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed
- * @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed
- * @NL80211_RRF_NO_HE: HE operation not allowed
- */
-enum nl80211_reg_rule_flags {
-	NL80211_RRF_NO_OFDM		= 1<<0,
-	NL80211_RRF_NO_CCK		= 1<<1,
-	NL80211_RRF_NO_INDOOR		= 1<<2,
-	NL80211_RRF_NO_OUTDOOR		= 1<<3,
-	NL80211_RRF_DFS			= 1<<4,
-	NL80211_RRF_PTP_ONLY		= 1<<5,
-	NL80211_RRF_PTMP_ONLY		= 1<<6,
-	NL80211_RRF_NO_IR		= 1<<7,
-	__NL80211_RRF_NO_IBSS		= 1<<8,
-	NL80211_RRF_AUTO_BW		= 1<<11,
-	NL80211_RRF_IR_CONCURRENT	= 1<<12,
-	NL80211_RRF_NO_HT40MINUS	= 1<<13,
-	NL80211_RRF_NO_HT40PLUS		= 1<<14,
-	NL80211_RRF_NO_80MHZ		= 1<<15,
-	NL80211_RRF_NO_160MHZ		= 1<<16,
-	NL80211_RRF_NO_HE		= 1<<17,
-};
-
-#define NL80211_RRF_PASSIVE_SCAN	NL80211_RRF_NO_IR
-#define NL80211_RRF_NO_IBSS		NL80211_RRF_NO_IR
-#define NL80211_RRF_NO_IR		NL80211_RRF_NO_IR
-#define NL80211_RRF_NO_HT40		(NL80211_RRF_NO_HT40MINUS |\
-					 NL80211_RRF_NO_HT40PLUS)
-#define NL80211_RRF_GO_CONCURRENT	NL80211_RRF_IR_CONCURRENT
-
-/* For backport compatibility with older userspace */
-#define NL80211_RRF_NO_IR_ALL		(NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS)
-
-/**
- * enum nl80211_dfs_regions - regulatory DFS regions
- *
- * @NL80211_DFS_UNSET: Country has no DFS master region specified
- * @NL80211_DFS_FCC: Country follows DFS master rules from FCC
- * @NL80211_DFS_ETSI: Country follows DFS master rules from ETSI
- * @NL80211_DFS_JP: Country follows DFS master rules from JP/MKK/Telec
- */
-enum nl80211_dfs_regions {
-	NL80211_DFS_UNSET	= 0,
-	NL80211_DFS_FCC		= 1,
-	NL80211_DFS_ETSI	= 2,
-	NL80211_DFS_JP		= 3,
-};
-
-/**
- * enum nl80211_user_reg_hint_type - type of user regulatory hint
- *
- * @NL80211_USER_REG_HINT_USER: a user sent the hint. This is always
- *	assumed if the attribute is not set.
- * @NL80211_USER_REG_HINT_CELL_BASE: the hint comes from a cellular
- *	base station. Device drivers that have been tested to work
- *	properly to support this type of hint can enable these hints
- *	by setting the NL80211_FEATURE_CELL_BASE_REG_HINTS feature
- *	capability on the struct wiphy. The wireless core will
- *	ignore all cell base station hints until at least one device
- *	present has been registered with the wireless core that
- *	has listed NL80211_FEATURE_CELL_BASE_REG_HINTS as a
- *	supported feature.
- * @NL80211_USER_REG_HINT_INDOOR: a user sent an hint indicating that the
- *	platform is operating in an indoor environment.
- */
-enum nl80211_user_reg_hint_type {
-	NL80211_USER_REG_HINT_USER	= 0,
-	NL80211_USER_REG_HINT_CELL_BASE = 1,
-	NL80211_USER_REG_HINT_INDOOR    = 2,
-};
-
-/**
- * enum nl80211_survey_info - survey information
- *
- * These attribute types are used with %NL80211_ATTR_SURVEY_INFO
- * when getting information about a survey.
- *
- * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved
- * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel
- * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm)
- * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used
- * @NL80211_SURVEY_INFO_TIME: amount of time (in ms) that the radio
- *	was turned on (on channel or globally)
- * @NL80211_SURVEY_INFO_TIME_BUSY: amount of the time the primary
- *	channel was sensed busy (either due to activity or energy detect)
- * @NL80211_SURVEY_INFO_TIME_EXT_BUSY: amount of time the extension
- *	channel was sensed busy
- * @NL80211_SURVEY_INFO_TIME_RX: amount of time the radio spent
- *	receiving data (on channel or globally)
- * @NL80211_SURVEY_INFO_TIME_TX: amount of time the radio spent
- *	transmitting data (on channel or globally)
- * @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan
- *	(on this channel or globally)
- * @NL80211_SURVEY_INFO_PAD: attribute used for padding for 64-bit alignment
- * @NL80211_SURVEY_INFO_TIME_BSS_RX: amount of time the radio spent
- *	receiving frames destined to the local BSS
- * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
- *	currently defined
- * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
- */
-enum nl80211_survey_info {
-	__NL80211_SURVEY_INFO_INVALID,
-	NL80211_SURVEY_INFO_FREQUENCY,
-	NL80211_SURVEY_INFO_NOISE,
-	NL80211_SURVEY_INFO_IN_USE,
-	NL80211_SURVEY_INFO_TIME,
-	NL80211_SURVEY_INFO_TIME_BUSY,
-	NL80211_SURVEY_INFO_TIME_EXT_BUSY,
-	NL80211_SURVEY_INFO_TIME_RX,
-	NL80211_SURVEY_INFO_TIME_TX,
-	NL80211_SURVEY_INFO_TIME_SCAN,
-	NL80211_SURVEY_INFO_PAD,
-	NL80211_SURVEY_INFO_TIME_BSS_RX,
-
-	/* keep last */
-	__NL80211_SURVEY_INFO_AFTER_LAST,
-	NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1
-};
-
-/* keep old names for compatibility */
-#define NL80211_SURVEY_INFO_CHANNEL_TIME		NL80211_SURVEY_INFO_TIME
-#define NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY		NL80211_SURVEY_INFO_TIME_BUSY
-#define NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY	NL80211_SURVEY_INFO_TIME_EXT_BUSY
-#define NL80211_SURVEY_INFO_CHANNEL_TIME_RX		NL80211_SURVEY_INFO_TIME_RX
-#define NL80211_SURVEY_INFO_CHANNEL_TIME_TX		NL80211_SURVEY_INFO_TIME_TX
-
-/**
- * enum nl80211_mntr_flags - monitor configuration flags
- *
- * Monitor configuration flags.
- *
- * @__NL80211_MNTR_FLAG_INVALID: reserved
- *
- * @NL80211_MNTR_FLAG_FCSFAIL: pass frames with bad FCS
- * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP
- * @NL80211_MNTR_FLAG_CONTROL: pass control frames
- * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering
- * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing.
- *	overrides all other flags.
- * @NL80211_MNTR_FLAG_ACTIVE: use the configured MAC address
- *	and ACK incoming unicast packets.
- *
- * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use
- * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag
- */
-enum nl80211_mntr_flags {
-	__NL80211_MNTR_FLAG_INVALID,
-	NL80211_MNTR_FLAG_FCSFAIL,
-	NL80211_MNTR_FLAG_PLCPFAIL,
-	NL80211_MNTR_FLAG_CONTROL,
-	NL80211_MNTR_FLAG_OTHER_BSS,
-	NL80211_MNTR_FLAG_COOK_FRAMES,
-	NL80211_MNTR_FLAG_ACTIVE,
-
-	/* keep last */
-	__NL80211_MNTR_FLAG_AFTER_LAST,
-	NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_mesh_power_mode - mesh power save modes
- *
- * @NL80211_MESH_POWER_UNKNOWN: The mesh power mode of the mesh STA is
- *	not known or has not been set yet.
- * @NL80211_MESH_POWER_ACTIVE: Active mesh power mode. The mesh STA is
- *	in Awake state all the time.
- * @NL80211_MESH_POWER_LIGHT_SLEEP: Light sleep mode. The mesh STA will
- *	alternate between Active and Doze states, but will wake up for
- *	neighbor's beacons.
- * @NL80211_MESH_POWER_DEEP_SLEEP: Deep sleep mode. The mesh STA will
- *	alternate between Active and Doze states, but may not wake up
- *	for neighbor's beacons.
- *
- * @__NL80211_MESH_POWER_AFTER_LAST - internal use
- * @NL80211_MESH_POWER_MAX - highest possible power save level
- */
-
-enum nl80211_mesh_power_mode {
-	NL80211_MESH_POWER_UNKNOWN,
-	NL80211_MESH_POWER_ACTIVE,
-	NL80211_MESH_POWER_LIGHT_SLEEP,
-	NL80211_MESH_POWER_DEEP_SLEEP,
-
-	__NL80211_MESH_POWER_AFTER_LAST,
-	NL80211_MESH_POWER_MAX = __NL80211_MESH_POWER_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_meshconf_params - mesh configuration parameters
- *
- * Mesh configuration parameters. These can be changed while the mesh is
- * active.
- *
- * @__NL80211_MESHCONF_INVALID: internal use
- *
- * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in
- *	millisecond units, used by the Peer Link Open message
- *
- * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in
- *	millisecond units, used by the peer link management to close a peer link
- *
- * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in
- *	millisecond units
- *
- * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed
- *	on this mesh interface
- *
- * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link
- *	open retries that can be sent to establish a new peer link instance in a
- *	mesh
- *
- * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh
- *	point.
- *
- * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically open
- *	peer links when we detect compatible mesh peers. Disabled if
- *	@NL80211_MESH_SETUP_USERSPACE_MPM or @NL80211_MESH_SETUP_USERSPACE_AMPE are
- *	set.
- *
- * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames
- *	containing a PREQ that an MP can send to a particular destination (path
- *	target)
- *
- * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths
- *	(in milliseconds)
- *
- * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait
- *	until giving up on a path discovery (in milliseconds)
- *
- * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh
- *	points receiving a PREQ shall consider the forwarding information from
- *	the root to be valid. (TU = time unit)
- *
- * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in
- *	TUs) during which an MP can send only one action frame containing a PREQ
- *	reference element
- *
- * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs)
- *	that it takes for an HWMP information element to propagate across the
- *	mesh
- *
- * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not
- *
- * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a
- *	source mesh point for path selection elements.
- *
- * @NL80211_MESHCONF_HWMP_RANN_INTERVAL:  The interval of time (in TUs) between
- *	root announcements are transmitted.
- *
- * @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has
- *	access to a broader network beyond the MBSS.  This is done via Root
- *	Announcement frames.
- *
- * @NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL: The minimum interval of time (in
- *	TUs) during which a mesh STA can send only one Action frame containing a
- *	PERR element.
- *
- * @NL80211_MESHCONF_FORWARDING: set Mesh STA as forwarding or non-forwarding
- *	or forwarding entity (default is TRUE - forwarding entity)
- *
- * @NL80211_MESHCONF_RSSI_THRESHOLD: RSSI threshold in dBm. This specifies the
- *	threshold for average signal strength of candidate station to establish
- *	a peer link.
- *
- * @NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR: maximum number of neighbors
- *	to synchronize to for 11s default synchronization method
- *	(see 11C.12.2.2)
- *
- * @NL80211_MESHCONF_HT_OPMODE: set mesh HT protection mode.
- *
- * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
- *
- * @NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT: The time (in TUs) for
- *	which mesh STAs receiving a proactive PREQ shall consider the forwarding
- *	information to the root mesh STA to be valid.
- *
- * @NL80211_MESHCONF_HWMP_ROOT_INTERVAL: The interval of time (in TUs) between
- *	proactive PREQs are transmitted.
- *
- * @NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL: The minimum interval of time
- *	(in TUs) during which a mesh STA can send only one Action frame
- *	containing a PREQ element for root path confirmation.
- *
- * @NL80211_MESHCONF_POWER_MODE: Default mesh power mode for new peer links.
- *	type &enum nl80211_mesh_power_mode (u32)
- *
- * @NL80211_MESHCONF_AWAKE_WINDOW: awake window duration (in TUs)
- *
- * @NL80211_MESHCONF_PLINK_TIMEOUT: If no tx activity is seen from a STA we've
- *	established peering with for longer than this time (in seconds), then
- *	remove it from the STA's list of peers. You may set this to 0 to disable
- *	the removal of the STA. Default is 30 minutes.
- *
- * @NL80211_MESHCONF_CONNECTED_TO_GATE: If set to true then this mesh STA
- *	will advertise that it is connected to a gate in the mesh formation
- *	field.  If left unset then the mesh formation field will only
- *	advertise such if there is an active root mesh path.
- *
- * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
- */
-enum nl80211_meshconf_params {
-	__NL80211_MESHCONF_INVALID,
-	NL80211_MESHCONF_RETRY_TIMEOUT,
-	NL80211_MESHCONF_CONFIRM_TIMEOUT,
-	NL80211_MESHCONF_HOLDING_TIMEOUT,
-	NL80211_MESHCONF_MAX_PEER_LINKS,
-	NL80211_MESHCONF_MAX_RETRIES,
-	NL80211_MESHCONF_TTL,
-	NL80211_MESHCONF_AUTO_OPEN_PLINKS,
-	NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES,
-	NL80211_MESHCONF_PATH_REFRESH_TIME,
-	NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT,
-	NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT,
-	NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL,
-	NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
-	NL80211_MESHCONF_HWMP_ROOTMODE,
-	NL80211_MESHCONF_ELEMENT_TTL,
-	NL80211_MESHCONF_HWMP_RANN_INTERVAL,
-	NL80211_MESHCONF_GATE_ANNOUNCEMENTS,
-	NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL,
-	NL80211_MESHCONF_FORWARDING,
-	NL80211_MESHCONF_RSSI_THRESHOLD,
-	NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR,
-	NL80211_MESHCONF_HT_OPMODE,
-	NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT,
-	NL80211_MESHCONF_HWMP_ROOT_INTERVAL,
-	NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL,
-	NL80211_MESHCONF_POWER_MODE,
-	NL80211_MESHCONF_AWAKE_WINDOW,
-	NL80211_MESHCONF_PLINK_TIMEOUT,
-	NL80211_MESHCONF_CONNECTED_TO_GATE,
-
-	/* keep last */
-	__NL80211_MESHCONF_ATTR_AFTER_LAST,
-	NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_mesh_setup_params - mesh setup parameters
- *
- * Mesh setup parameters.  These are used to start/join a mesh and cannot be
- * changed while the mesh is active.
- *
- * @__NL80211_MESH_SETUP_INVALID: Internal use
- *
- * @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a
- *	vendor specific path selection algorithm or disable it to use the
- *	default HWMP.
- *
- * @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a
- *	vendor specific path metric or disable it to use the default Airtime
- *	metric.
- *
- * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a
- *	robust security network ie, or a vendor specific information element
- *	that vendors will use to identify the path selection methods and
- *	metrics in use.
- *
- * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication
- *	daemon will be authenticating mesh candidates.
- *
- * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication
- *	daemon will be securing peer link frames.  AMPE is a secured version of
- *	Mesh Peering Management (MPM) and is implemented with the assistance of
- *	a userspace daemon.  When this flag is set, the kernel will send peer
- *	management frames to a userspace daemon that will implement AMPE
- *	functionality (security capabilities selection, key confirmation, and
- *	key management).  When the flag is unset (default), the kernel can
- *	autonomously complete (unsecured) mesh peering without the need of a
- *	userspace daemon.
- *
- * @NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC: Enable this option to use a
- *	vendor specific synchronization method or disable it to use the default
- *	neighbor offset synchronization
- *
- * @NL80211_MESH_SETUP_USERSPACE_MPM: Enable this option if userspace will
- *	implement an MPM which handles peer allocation and state.
- *
- * @NL80211_MESH_SETUP_AUTH_PROTOCOL: Inform the kernel of the authentication
- *	method (u8, as defined in IEEE 8.4.2.100.6, e.g. 0x1 for SAE).
- *	Default is no authentication method required.
- *
- * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
- *
- * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
- */
-enum nl80211_mesh_setup_params {
-	__NL80211_MESH_SETUP_INVALID,
-	NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL,
-	NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC,
-	NL80211_MESH_SETUP_IE,
-	NL80211_MESH_SETUP_USERSPACE_AUTH,
-	NL80211_MESH_SETUP_USERSPACE_AMPE,
-	NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC,
-	NL80211_MESH_SETUP_USERSPACE_MPM,
-	NL80211_MESH_SETUP_AUTH_PROTOCOL,
-
-	/* keep last */
-	__NL80211_MESH_SETUP_ATTR_AFTER_LAST,
-	NL80211_MESH_SETUP_ATTR_MAX = __NL80211_MESH_SETUP_ATTR_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_txq_attr - TX queue parameter attributes
- * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved
- * @NL80211_TXQ_ATTR_AC: AC identifier (NL80211_AC_*)
- * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning
- *	disabled
- * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form
- *	2^n-1 in the range 1..32767]
- * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form
- *	2^n-1 in the range 1..32767]
- * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255]
- * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal
- * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number
- */
-enum nl80211_txq_attr {
-	__NL80211_TXQ_ATTR_INVALID,
-	NL80211_TXQ_ATTR_AC,
-	NL80211_TXQ_ATTR_TXOP,
-	NL80211_TXQ_ATTR_CWMIN,
-	NL80211_TXQ_ATTR_CWMAX,
-	NL80211_TXQ_ATTR_AIFS,
-
-	/* keep last */
-	__NL80211_TXQ_ATTR_AFTER_LAST,
-	NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1
-};
-
-enum nl80211_ac {
-	NL80211_AC_VO,
-	NL80211_AC_VI,
-	NL80211_AC_BE,
-	NL80211_AC_BK,
-	NL80211_NUM_ACS
-};
-
-/* backward compat */
-#define NL80211_TXQ_ATTR_QUEUE	NL80211_TXQ_ATTR_AC
-#define NL80211_TXQ_Q_VO	NL80211_AC_VO
-#define NL80211_TXQ_Q_VI	NL80211_AC_VI
-#define NL80211_TXQ_Q_BE	NL80211_AC_BE
-#define NL80211_TXQ_Q_BK	NL80211_AC_BK
-
-/**
- * enum nl80211_channel_type - channel type
- * @NL80211_CHAN_NO_HT: 20 MHz, non-HT channel
- * @NL80211_CHAN_HT20: 20 MHz HT channel
- * @NL80211_CHAN_HT40MINUS: HT40 channel, secondary channel
- *	below the control channel
- * @NL80211_CHAN_HT40PLUS: HT40 channel, secondary channel
- *	above the control channel
- */
-enum nl80211_channel_type {
-	NL80211_CHAN_NO_HT,
-	NL80211_CHAN_HT20,
-	NL80211_CHAN_HT40MINUS,
-	NL80211_CHAN_HT40PLUS
-};
-
-/**
- * enum nl80211_key_mode - Key mode
- *
- * @NL80211_KEY_RX_TX: (Default)
- *	Key can be used for Rx and Tx immediately
- *
- * The following modes can only be selected for unicast keys and when the
- * driver supports @NL80211_EXT_FEATURE_EXT_KEY_ID:
- *
- * @NL80211_KEY_NO_TX: Only allowed in combination with @NL80211_CMD_NEW_KEY:
- *	Unicast key can only be used for Rx, Tx not allowed, yet
- * @NL80211_KEY_SET_TX: Only allowed in combination with @NL80211_CMD_SET_KEY:
- *	The unicast key identified by idx and mac is cleared for Tx and becomes
- *	the preferred Tx key for the station.
- */
-enum nl80211_key_mode {
-	NL80211_KEY_RX_TX,
-	NL80211_KEY_NO_TX,
-	NL80211_KEY_SET_TX
-};
-
-/**
- * enum nl80211_chan_width - channel width definitions
- *
- * These values are used with the %NL80211_ATTR_CHANNEL_WIDTH
- * attribute.
- *
- * @NL80211_CHAN_WIDTH_20_NOHT: 20 MHz, non-HT channel
- * @NL80211_CHAN_WIDTH_20: 20 MHz HT channel
- * @NL80211_CHAN_WIDTH_40: 40 MHz channel, the %NL80211_ATTR_CENTER_FREQ1
- *	attribute must be provided as well
- * @NL80211_CHAN_WIDTH_80: 80 MHz channel, the %NL80211_ATTR_CENTER_FREQ1
- *	attribute must be provided as well
- * @NL80211_CHAN_WIDTH_80P80: 80+80 MHz channel, the %NL80211_ATTR_CENTER_FREQ1
- *	and %NL80211_ATTR_CENTER_FREQ2 attributes must be provided as well
- * @NL80211_CHAN_WIDTH_160: 160 MHz channel, the %NL80211_ATTR_CENTER_FREQ1
- *	attribute must be provided as well
- * @NL80211_CHAN_WIDTH_5: 5 MHz OFDM channel
- * @NL80211_CHAN_WIDTH_10: 10 MHz OFDM channel
- */
-enum nl80211_chan_width {
-	NL80211_CHAN_WIDTH_20_NOHT,
-	NL80211_CHAN_WIDTH_20,
-	NL80211_CHAN_WIDTH_40,
-	NL80211_CHAN_WIDTH_80,
-	NL80211_CHAN_WIDTH_80P80,
-	NL80211_CHAN_WIDTH_160,
-	NL80211_CHAN_WIDTH_5,
-	NL80211_CHAN_WIDTH_10,
-};
-
-/**
- * enum nl80211_bss_scan_width - control channel width for a BSS
- *
- * These values are used with the %NL80211_BSS_CHAN_WIDTH attribute.
- *
- * @NL80211_BSS_CHAN_WIDTH_20: control channel is 20 MHz wide or compatible
- * @NL80211_BSS_CHAN_WIDTH_10: control channel is 10 MHz wide
- * @NL80211_BSS_CHAN_WIDTH_5: control channel is 5 MHz wide
- */
-enum nl80211_bss_scan_width {
-	NL80211_BSS_CHAN_WIDTH_20,
-	NL80211_BSS_CHAN_WIDTH_10,
-	NL80211_BSS_CHAN_WIDTH_5,
-};
-
-/**
- * enum nl80211_bss - netlink attributes for a BSS
- *
- * @__NL80211_BSS_INVALID: invalid
- * @NL80211_BSS_BSSID: BSSID of the BSS (6 octets)
- * @NL80211_BSS_FREQUENCY: frequency in MHz (u32)
- * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64)
- *	(if @NL80211_BSS_PRESP_DATA is present then this is known to be
- *	from a probe response, otherwise it may be from the same beacon
- *	that the NL80211_BSS_BEACON_TSF will be from)
- * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16)
- * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16)
- * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the
- *	raw information elements from the probe response/beacon (bin);
- *	if the %NL80211_BSS_BEACON_IES attribute is present and the data is
- *	different then the IEs here are from a Probe Response frame; otherwise
- *	they are from a Beacon frame.
- *	However, if the driver does not indicate the source of the IEs, these
- *	IEs may be from either frame subtype.
- *	If present, the @NL80211_BSS_PRESP_DATA attribute indicates that the
- *	data here is known to be from a probe response, without any heuristics.
- * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon
- *	in mBm (100 * dBm) (s32)
- * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon
- *	in unspecified units, scaled to 0..100 (u8)
- * @NL80211_BSS_STATUS: status, if this BSS is "used"
- * @NL80211_BSS_SEEN_MS_AGO: age of this BSS entry in ms
- * @NL80211_BSS_BEACON_IES: binary attribute containing the raw information
- *	elements from a Beacon frame (bin); not present if no Beacon frame has
- *	yet been received
- * @NL80211_BSS_CHAN_WIDTH: channel width of the control channel
- *	(u32, enum nl80211_bss_scan_width)
- * @NL80211_BSS_BEACON_TSF: TSF of the last received beacon (u64)
- *	(not present if no beacon frame has been received yet)
- * @NL80211_BSS_PRESP_DATA: the data in @NL80211_BSS_INFORMATION_ELEMENTS and
- *	@NL80211_BSS_TSF is known to be from a probe response (flag attribute)
- * @NL80211_BSS_LAST_SEEN_BOOTTIME: CLOCK_BOOTTIME timestamp when this entry
- *	was last updated by a received frame. The value is expected to be
- *	accurate to about 10ms. (u64, nanoseconds)
- * @NL80211_BSS_PAD: attribute used for padding for 64-bit alignment
- * @NL80211_BSS_PARENT_TSF: the time at the start of reception of the first
- *	octet of the timestamp field of the last beacon/probe received for
- *	this BSS. The time is the TSF of the BSS specified by
- *	@NL80211_BSS_PARENT_BSSID. (u64).
- * @NL80211_BSS_PARENT_BSSID: the BSS according to which @NL80211_BSS_PARENT_TSF
- *	is set.
- * @NL80211_BSS_CHAIN_SIGNAL: per-chain signal strength of last BSS update.
- *	Contains a nested array of signal strength attributes (u8, dBm),
- *	using the nesting index as the antenna number.
- * @__NL80211_BSS_AFTER_LAST: internal
- * @NL80211_BSS_MAX: highest BSS attribute
- */
-enum nl80211_bss {
-	__NL80211_BSS_INVALID,
-	NL80211_BSS_BSSID,
-	NL80211_BSS_FREQUENCY,
-	NL80211_BSS_TSF,
-	NL80211_BSS_BEACON_INTERVAL,
-	NL80211_BSS_CAPABILITY,
-	NL80211_BSS_INFORMATION_ELEMENTS,
-	NL80211_BSS_SIGNAL_MBM,
-	NL80211_BSS_SIGNAL_UNSPEC,
-	NL80211_BSS_STATUS,
-	NL80211_BSS_SEEN_MS_AGO,
-	NL80211_BSS_BEACON_IES,
-	NL80211_BSS_CHAN_WIDTH,
-	NL80211_BSS_BEACON_TSF,
-	NL80211_BSS_PRESP_DATA,
-	NL80211_BSS_LAST_SEEN_BOOTTIME,
-	NL80211_BSS_PAD,
-	NL80211_BSS_PARENT_TSF,
-	NL80211_BSS_PARENT_BSSID,
-	NL80211_BSS_CHAIN_SIGNAL,
-
-	/* keep last */
-	__NL80211_BSS_AFTER_LAST,
-	NL80211_BSS_MAX = __NL80211_BSS_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_bss_status - BSS "status"
- * @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS.
- *	Note that this is no longer used since cfg80211 no longer
- *	keeps track of whether or not authentication was done with
- *	a given BSS.
- * @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS.
- * @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS.
- *
- * The BSS status is a BSS attribute in scan dumps, which
- * indicates the status the interface has wrt. this BSS.
- */
-enum nl80211_bss_status {
-	NL80211_BSS_STATUS_AUTHENTICATED,
-	NL80211_BSS_STATUS_ASSOCIATED,
-	NL80211_BSS_STATUS_IBSS_JOINED,
-};
-
-/**
- * enum nl80211_auth_type - AuthenticationType
- *
- * @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication
- * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only)
- * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r)
- * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP)
- * @NL80211_AUTHTYPE_SAE: Simultaneous authentication of equals
- * @NL80211_AUTHTYPE_FILS_SK: Fast Initial Link Setup shared key
- * @NL80211_AUTHTYPE_FILS_SK_PFS: Fast Initial Link Setup shared key with PFS
- * @NL80211_AUTHTYPE_FILS_PK: Fast Initial Link Setup public key
- * @__NL80211_AUTHTYPE_NUM: internal
- * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm
- * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by
- *	trying multiple times); this is invalid in netlink -- leave out
- *	the attribute for this on CONNECT commands.
- */
-enum nl80211_auth_type {
-	NL80211_AUTHTYPE_OPEN_SYSTEM,
-	NL80211_AUTHTYPE_SHARED_KEY,
-	NL80211_AUTHTYPE_FT,
-	NL80211_AUTHTYPE_NETWORK_EAP,
-	NL80211_AUTHTYPE_SAE,
-	NL80211_AUTHTYPE_FILS_SK,
-	NL80211_AUTHTYPE_FILS_SK_PFS,
-	NL80211_AUTHTYPE_FILS_PK,
-
-	/* keep last */
-	__NL80211_AUTHTYPE_NUM,
-	NL80211_AUTHTYPE_MAX = __NL80211_AUTHTYPE_NUM - 1,
-	NL80211_AUTHTYPE_AUTOMATIC
-};
-
-/**
- * enum nl80211_key_type - Key Type
- * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key
- * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key
- * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS)
- * @NUM_NL80211_KEYTYPES: number of defined key types
- */
-enum nl80211_key_type {
-	NL80211_KEYTYPE_GROUP,
-	NL80211_KEYTYPE_PAIRWISE,
-	NL80211_KEYTYPE_PEERKEY,
-
-	NUM_NL80211_KEYTYPES
-};
-
-/**
- * enum nl80211_mfp - Management frame protection state
- * @NL80211_MFP_NO: Management frame protection not used
- * @NL80211_MFP_REQUIRED: Management frame protection required
- * @NL80211_MFP_OPTIONAL: Management frame protection is optional
- */
-enum nl80211_mfp {
-	NL80211_MFP_NO,
-	NL80211_MFP_REQUIRED,
-	NL80211_MFP_OPTIONAL,
-};
-
-enum nl80211_wpa_versions {
-	NL80211_WPA_VERSION_1 = 1 << 0,
-	NL80211_WPA_VERSION_2 = 1 << 1,
-	NL80211_WPA_VERSION_3 = 1 << 2,
-};
-
-/**
- * enum nl80211_key_default_types - key default types
- * @__NL80211_KEY_DEFAULT_TYPE_INVALID: invalid
- * @NL80211_KEY_DEFAULT_TYPE_UNICAST: key should be used as default
- *	unicast key
- * @NL80211_KEY_DEFAULT_TYPE_MULTICAST: key should be used as default
- *	multicast key
- * @NUM_NL80211_KEY_DEFAULT_TYPES: number of default types
- */
-enum nl80211_key_default_types {
-	__NL80211_KEY_DEFAULT_TYPE_INVALID,
-	NL80211_KEY_DEFAULT_TYPE_UNICAST,
-	NL80211_KEY_DEFAULT_TYPE_MULTICAST,
-
-	NUM_NL80211_KEY_DEFAULT_TYPES
-};
-
-/**
- * enum nl80211_key_attributes - key attributes
- * @__NL80211_KEY_INVALID: invalid
- * @NL80211_KEY_DATA: (temporal) key data; for TKIP this consists of
- *	16 bytes encryption key followed by 8 bytes each for TX and RX MIC
- *	keys
- * @NL80211_KEY_IDX: key ID (u8, 0-3)
- * @NL80211_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11
- *	section 7.3.2.25.1, e.g. 0x000FAC04)
- * @NL80211_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
- *	CCMP keys, each six bytes in little endian
- * @NL80211_KEY_DEFAULT: flag indicating default key
- * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key
- * @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not
- *	specified the default depends on whether a MAC address was
- *	given with the command using the key or not (u32)
- * @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags
- *	attributes, specifying what a key should be set as default as.
- *	See &enum nl80211_key_default_types.
- * @NL80211_KEY_MODE: the mode from enum nl80211_key_mode.
- *	Defaults to @NL80211_KEY_RX_TX.
- * @NL80211_KEY_DEFAULT_BEACON: flag indicating default Beacon frame key
- *
- * @__NL80211_KEY_AFTER_LAST: internal
- * @NL80211_KEY_MAX: highest key attribute
- */
-enum nl80211_key_attributes {
-	__NL80211_KEY_INVALID,
-	NL80211_KEY_DATA,
-	NL80211_KEY_IDX,
-	NL80211_KEY_CIPHER,
-	NL80211_KEY_SEQ,
-	NL80211_KEY_DEFAULT,
-	NL80211_KEY_DEFAULT_MGMT,
-	NL80211_KEY_TYPE,
-	NL80211_KEY_DEFAULT_TYPES,
-	NL80211_KEY_MODE,
-	NL80211_KEY_DEFAULT_BEACON,
-
-	/* keep last */
-	__NL80211_KEY_AFTER_LAST,
-	NL80211_KEY_MAX = __NL80211_KEY_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_tx_rate_attributes - TX rate set attributes
- * @__NL80211_TXRATE_INVALID: invalid
- * @NL80211_TXRATE_LEGACY: Legacy (non-MCS) rates allowed for TX rate selection
- *	in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with
- *	1 = 500 kbps) but without the IE length restriction (at most
- *	%NL80211_MAX_SUPP_RATES in a single array).
- * @NL80211_TXRATE_HT: HT (MCS) rates allowed for TX rate selection
- *	in an array of MCS numbers.
- * @NL80211_TXRATE_VHT: VHT rates allowed for TX rate selection,
- *	see &struct nl80211_txrate_vht
- * @NL80211_TXRATE_GI: configure GI, see &enum nl80211_txrate_gi
- * @__NL80211_TXRATE_AFTER_LAST: internal
- * @NL80211_TXRATE_MAX: highest TX rate attribute
- */
-enum nl80211_tx_rate_attributes {
-	__NL80211_TXRATE_INVALID,
-	NL80211_TXRATE_LEGACY,
-	NL80211_TXRATE_HT,
-	NL80211_TXRATE_VHT,
-	NL80211_TXRATE_GI,
-
-	/* keep last */
-	__NL80211_TXRATE_AFTER_LAST,
-	NL80211_TXRATE_MAX = __NL80211_TXRATE_AFTER_LAST - 1
-};
-
-#define NL80211_TXRATE_MCS NL80211_TXRATE_HT
-#define NL80211_VHT_NSS_MAX		8
-
-/**
- * struct nl80211_txrate_vht - VHT MCS/NSS txrate bitmap
- * @mcs: MCS bitmap table for each NSS (array index 0 for 1 stream, etc.)
- */
-struct nl80211_txrate_vht {
-	__u16 mcs[NL80211_VHT_NSS_MAX];
-};
-
-enum nl80211_txrate_gi {
-	NL80211_TXRATE_DEFAULT_GI,
-	NL80211_TXRATE_FORCE_SGI,
-	NL80211_TXRATE_FORCE_LGI,
-};
-
-/**
- * enum nl80211_band - Frequency band
- * @NL80211_BAND_2GHZ: 2.4 GHz ISM band
- * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz)
- * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 69.12 GHz)
- * @NL80211_BAND_6GHZ: around 6 GHz band (5.9 - 7.2 GHz)
- * @NUM_NL80211_BANDS: number of bands, avoid using this in userspace
- *	since newer kernel versions may support more bands
- */
-enum nl80211_band {
-	NL80211_BAND_2GHZ,
-	NL80211_BAND_5GHZ,
-	NL80211_BAND_60GHZ,
-	NL80211_BAND_6GHZ,
-
-	NUM_NL80211_BANDS,
-};
-
-/**
- * enum nl80211_ps_state - powersave state
- * @NL80211_PS_DISABLED: powersave is disabled
- * @NL80211_PS_ENABLED: powersave is enabled
- */
-enum nl80211_ps_state {
-	NL80211_PS_DISABLED,
-	NL80211_PS_ENABLED,
-};
-
-/**
- * enum nl80211_attr_cqm - connection quality monitor attributes
- * @__NL80211_ATTR_CQM_INVALID: invalid
- * @NL80211_ATTR_CQM_RSSI_THOLD: RSSI threshold in dBm. This value specifies
- *	the threshold for the RSSI level at which an event will be sent. Zero
- *	to disable.  Alternatively, if %NL80211_EXT_FEATURE_CQM_RSSI_LIST is
- *	set, multiple values can be supplied as a low-to-high sorted array of
- *	threshold values in dBm.  Events will be sent when the RSSI value
- *	crosses any of the thresholds.
- * @NL80211_ATTR_CQM_RSSI_HYST: RSSI hysteresis in dBm. This value specifies
- *	the minimum amount the RSSI level must change after an event before a
- *	new event may be issued (to reduce effects of RSSI oscillation).
- * @NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT: RSSI threshold event
- * @NL80211_ATTR_CQM_PKT_LOSS_EVENT: a u32 value indicating that this many
- *	consecutive packets were not acknowledged by the peer
- * @NL80211_ATTR_CQM_TXE_RATE: TX error rate in %. Minimum % of TX failures
- *	during the given %NL80211_ATTR_CQM_TXE_INTVL before an
- *	%NL80211_CMD_NOTIFY_CQM with reported %NL80211_ATTR_CQM_TXE_RATE and
- *	%NL80211_ATTR_CQM_TXE_PKTS is generated.
- * @NL80211_ATTR_CQM_TXE_PKTS: number of attempted packets in a given
- *	%NL80211_ATTR_CQM_TXE_INTVL before %NL80211_ATTR_CQM_TXE_RATE is
- *	checked.
- * @NL80211_ATTR_CQM_TXE_INTVL: interval in seconds. Specifies the periodic
- *	interval in which %NL80211_ATTR_CQM_TXE_PKTS and
- *	%NL80211_ATTR_CQM_TXE_RATE must be satisfied before generating an
- *	%NL80211_CMD_NOTIFY_CQM. Set to 0 to turn off TX error reporting.
- * @NL80211_ATTR_CQM_BEACON_LOSS_EVENT: flag attribute that's set in a beacon
- *	loss event
- * @NL80211_ATTR_CQM_RSSI_LEVEL: the RSSI value in dBm that triggered the
- *	RSSI threshold event.
- * @__NL80211_ATTR_CQM_AFTER_LAST: internal
- * @NL80211_ATTR_CQM_MAX: highest key attribute
- */
-enum nl80211_attr_cqm {
-	__NL80211_ATTR_CQM_INVALID,
-	NL80211_ATTR_CQM_RSSI_THOLD,
-	NL80211_ATTR_CQM_RSSI_HYST,
-	NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT,
-	NL80211_ATTR_CQM_PKT_LOSS_EVENT,
-	NL80211_ATTR_CQM_TXE_RATE,
-	NL80211_ATTR_CQM_TXE_PKTS,
-	NL80211_ATTR_CQM_TXE_INTVL,
-	NL80211_ATTR_CQM_BEACON_LOSS_EVENT,
-	NL80211_ATTR_CQM_RSSI_LEVEL,
-
-	/* keep last */
-	__NL80211_ATTR_CQM_AFTER_LAST,
-	NL80211_ATTR_CQM_MAX = __NL80211_ATTR_CQM_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_cqm_rssi_threshold_event - RSSI threshold event
- * @NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW: The RSSI level is lower than the
- *      configured threshold
- * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the
- *      configured threshold
- * @NL80211_CQM_RSSI_BEACON_LOSS_EVENT: (reserved, never sent)
- */
-enum nl80211_cqm_rssi_threshold_event {
-	NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
-	NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
-	NL80211_CQM_RSSI_BEACON_LOSS_EVENT,
-};
-
-
-/**
- * enum nl80211_tx_power_setting - TX power adjustment
- * @NL80211_TX_POWER_AUTOMATIC: automatically determine transmit power
- * @NL80211_TX_POWER_LIMITED: limit TX power by the mBm parameter
- * @NL80211_TX_POWER_FIXED: fix TX power to the mBm parameter
- */
-enum nl80211_tx_power_setting {
-	NL80211_TX_POWER_AUTOMATIC,
-	NL80211_TX_POWER_LIMITED,
-	NL80211_TX_POWER_FIXED,
-};
-
-/**
- * enum nl80211_tid_config - TID config state
- * @NL80211_TID_CONFIG_ENABLE: Enable config for the TID
- * @NL80211_TID_CONFIG_DISABLE: Disable config for the TID
- */
-enum nl80211_tid_config {
-	NL80211_TID_CONFIG_ENABLE,
-	NL80211_TID_CONFIG_DISABLE,
-};
-
-/* enum nl80211_tid_config_attr - TID specific configuration.
- * @NL80211_TID_CONFIG_ATTR_PAD: pad attribute for 64-bit values
- * @NL80211_TID_CONFIG_ATTR_VIF_SUPP: a bitmap (u64) of attributes supported
- *	for per-vif configuration; doesn't list the ones that are generic
- *	(%NL80211_TID_CONFIG_ATTR_TIDS, %NL80211_TID_CONFIG_ATTR_OVERRIDE).
- * @NL80211_TID_CONFIG_ATTR_PEER_SUPP: same as the previous per-vif one, but
- *	per peer instead.
- * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribue, if no peer
- *	is selected, if set indicates that the new configuration overrides
- *	all previous peer configurations, otherwise previous peer specific
- *	configurations should be left untouched. If peer is selected then
- *	it will reset particular TID configuration of that peer and it will
- *	not accept other TID config attributes along with peer.
- * @NL80211_TID_CONFIG_ATTR_TIDS: a bitmask value of TIDs (bit 0 to 7)
- *	Its type is u16.
- * @NL80211_TID_CONFIG_ATTR_NOACK: Configure ack policy for the TID.
- *	specified in %NL80211_TID_CONFIG_ATTR_TID. see %enum nl80211_tid_config.
- *	Its type is u8.
- * @NL80211_TID_CONFIG_ATTR_RETRY_SHORT: Number of retries used with data frame
- *	transmission, user-space sets this configuration in
- *	&NL80211_CMD_SET_TID_CONFIG. It is u8 type, min value is 1 and
- *	the max value is advertised by the driver in this attribute on
- *	output in wiphy capabilities.
- * @NL80211_TID_CONFIG_ATTR_RETRY_LONG: Number of retries used with data frame
- *	transmission, user-space sets this configuration in
- *	&NL80211_CMD_SET_TID_CONFIG. Its type is u8, min value is 1 and
- *	the max value is advertised by the driver in this attribute on
- *	output in wiphy capabilities.
- * @NL80211_TID_CONFIG_ATTR_AMPDU_CTRL: Enable/Disable aggregation for the TIDs
- *	specified in %NL80211_TID_CONFIG_ATTR_TIDS. Its type is u8, using
- *	the values from &nl80211_tid_config.
- * @NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL: Enable/Disable RTS_CTS for the TIDs
- *	specified in %NL80211_TID_CONFIG_ATTR_TIDS. It is u8 type, using
- *	the values from &nl80211_tid_config.
- */
-enum nl80211_tid_config_attr {
-	__NL80211_TID_CONFIG_ATTR_INVALID,
-	NL80211_TID_CONFIG_ATTR_PAD,
-	NL80211_TID_CONFIG_ATTR_VIF_SUPP,
-	NL80211_TID_CONFIG_ATTR_PEER_SUPP,
-	NL80211_TID_CONFIG_ATTR_OVERRIDE,
-	NL80211_TID_CONFIG_ATTR_TIDS,
-	NL80211_TID_CONFIG_ATTR_NOACK,
-	NL80211_TID_CONFIG_ATTR_RETRY_SHORT,
-	NL80211_TID_CONFIG_ATTR_RETRY_LONG,
-	NL80211_TID_CONFIG_ATTR_AMPDU_CTRL,
-	NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL,
-
-	/* keep last */
-	__NL80211_TID_CONFIG_ATTR_AFTER_LAST,
-	NL80211_TID_CONFIG_ATTR_MAX = __NL80211_TID_CONFIG_ATTR_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_packet_pattern_attr - packet pattern attribute
- * @__NL80211_PKTPAT_INVALID: invalid number for nested attribute
- * @NL80211_PKTPAT_PATTERN: the pattern, values where the mask has
- *	a zero bit are ignored
- * @NL80211_PKTPAT_MASK: pattern mask, must be long enough to have
- *	a bit for each byte in the pattern. The lowest-order bit corresponds
- *	to the first byte of the pattern, but the bytes of the pattern are
- *	in a little-endian-like format, i.e. the 9th byte of the pattern
- *	corresponds to the lowest-order bit in the second byte of the mask.
- *	For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where
- *	xx indicates "don't care") would be represented by a pattern of
- *	twelve zero bytes, and a mask of "0xed,0x01".
- *	Note that the pattern matching is done as though frames were not
- *	802.11 frames but 802.3 frames, i.e. the frame is fully unpacked
- *	first (including SNAP header unpacking) and then matched.
- * @NL80211_PKTPAT_OFFSET: packet offset, pattern is matched after
- *	these fixed number of bytes of received packet
- * @NUM_NL80211_PKTPAT: number of attributes
- * @MAX_NL80211_PKTPAT: max attribute number
- */
-enum nl80211_packet_pattern_attr {
-	__NL80211_PKTPAT_INVALID,
-	NL80211_PKTPAT_MASK,
-	NL80211_PKTPAT_PATTERN,
-	NL80211_PKTPAT_OFFSET,
-
-	NUM_NL80211_PKTPAT,
-	MAX_NL80211_PKTPAT = NUM_NL80211_PKTPAT - 1,
-};
-
-/**
- * struct nl80211_pattern_support - packet pattern support information
- * @max_patterns: maximum number of patterns supported
- * @min_pattern_len: minimum length of each pattern
- * @max_pattern_len: maximum length of each pattern
- * @max_pkt_offset: maximum Rx packet offset
- *
- * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when
- * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED or in
- * %NL80211_ATTR_COALESCE_RULE_PKT_PATTERN when that is part of
- * %NL80211_ATTR_COALESCE_RULE in the capability information given
- * by the kernel to userspace.
- */
-struct nl80211_pattern_support {
-	__u32 max_patterns;
-	__u32 min_pattern_len;
-	__u32 max_pattern_len;
-	__u32 max_pkt_offset;
-} __attribute__((packed));
-
-/* only for backward compatibility */
-#define __NL80211_WOWLAN_PKTPAT_INVALID __NL80211_PKTPAT_INVALID
-#define NL80211_WOWLAN_PKTPAT_MASK NL80211_PKTPAT_MASK
-#define NL80211_WOWLAN_PKTPAT_PATTERN NL80211_PKTPAT_PATTERN
-#define NL80211_WOWLAN_PKTPAT_OFFSET NL80211_PKTPAT_OFFSET
-#define NUM_NL80211_WOWLAN_PKTPAT NUM_NL80211_PKTPAT
-#define MAX_NL80211_WOWLAN_PKTPAT MAX_NL80211_PKTPAT
-#define nl80211_wowlan_pattern_support nl80211_pattern_support
-
-/**
- * enum nl80211_wowlan_triggers - WoWLAN trigger definitions
- * @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes
- * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put
- *	the chip into a special state -- works best with chips that have
- *	support for low-power operation already (flag)
- *	Note that this mode is incompatible with all of the others, if
- *	any others are even supported by the device.
- * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect
- *	is detected is implementation-specific (flag)
- * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed
- *	by 16 repetitions of MAC addr, anywhere in payload) (flag)
- * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns
- *	which are passed in an array of nested attributes, each nested attribute
- *	defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern.
- *	Each pattern defines a wakeup packet. Packet offset is associated with
- *	each pattern which is used while matching the pattern. The matching is
- *	done on the MSDU, i.e. as though the packet was an 802.3 packet, so the
- *	pattern matching is done after the packet is converted to the MSDU.
- *
- *	In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute
- *	carrying a &struct nl80211_pattern_support.
- *
- *	When reporting wakeup. it is a u32 attribute containing the 0-based
- *	index of the pattern that caused the wakeup, in the patterns passed
- *	to the kernel when configuring.
- * @NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED: Not a real trigger, and cannot be
- *	used when setting, used only to indicate that GTK rekeying is supported
- *	by the device (flag)
- * @NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE: wake up on GTK rekey failure (if
- *	done by the device) (flag)
- * @NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST: wake up on EAP Identity Request
- *	packet (flag)
- * @NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE: wake up on 4-way handshake (flag)
- * @NL80211_WOWLAN_TRIG_RFKILL_RELEASE: wake up when rfkill is released
- *	(on devices that have rfkill in the device) (flag)
- * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211: For wakeup reporting only, contains
- *	the 802.11 packet that caused the wakeup, e.g. a deauth frame. The frame
- *	may be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN
- *	attribute contains the original length.
- * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN: Original length of the 802.11
- *	packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211
- *	attribute if the packet was truncated somewhere.
- * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023: For wakeup reporting only, contains the
- *	802.11 packet that caused the wakeup, e.g. a magic packet. The frame may
- *	be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN attribute
- *	contains the original length.
- * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN: Original length of the 802.3
- *	packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023
- *	attribute if the packet was truncated somewhere.
- * @NL80211_WOWLAN_TRIG_TCP_CONNECTION: TCP connection wake, see DOC section
- *	"TCP connection wakeup" for more details. This is a nested attribute
- *	containing the exact information for establishing and keeping alive
- *	the TCP connection.
- * @NL80211_WOWLAN_TRIG_TCP_WAKEUP_MATCH: For wakeup reporting only, the
- *	wakeup packet was received on the TCP connection
- * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST: For wakeup reporting only, the
- *	TCP connection was lost or failed to be established
- * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS: For wakeup reporting only,
- *	the TCP connection ran out of tokens to use for data to send to the
- *	service
- * @NL80211_WOWLAN_TRIG_NET_DETECT: wake up when a configured network
- *	is detected.  This is a nested attribute that contains the
- *	same attributes used with @NL80211_CMD_START_SCHED_SCAN.  It
- *	specifies how the scan is performed (e.g. the interval, the
- *	channels to scan and the initial delay) as well as the scan
- *	results that will trigger a wake (i.e. the matchsets).  This
- *	attribute is also sent in a response to
- *	@NL80211_CMD_GET_WIPHY, indicating the number of match sets
- *	supported by the driver (u32).
- * @NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS: nested attribute
- *	containing an array with information about what triggered the
- *	wake up.  If no elements are present in the array, it means
- *	that the information is not available.  If more than one
- *	element is present, it means that more than one match
- *	occurred.
- *	Each element in the array is a nested attribute that contains
- *	one optional %NL80211_ATTR_SSID attribute and one optional
- *	%NL80211_ATTR_SCAN_FREQUENCIES attribute.  At least one of
- *	these attributes must be present.  If
- *	%NL80211_ATTR_SCAN_FREQUENCIES contains more than one
- *	frequency, it means that the match occurred in more than one
- *	channel.
- * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers
- * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number
- *
- * These nested attributes are used to configure the wakeup triggers and
- * to report the wakeup reason(s).
- */
-enum nl80211_wowlan_triggers {
-	__NL80211_WOWLAN_TRIG_INVALID,
-	NL80211_WOWLAN_TRIG_ANY,
-	NL80211_WOWLAN_TRIG_DISCONNECT,
-	NL80211_WOWLAN_TRIG_MAGIC_PKT,
-	NL80211_WOWLAN_TRIG_PKT_PATTERN,
-	NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED,
-	NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE,
-	NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST,
-	NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE,
-	NL80211_WOWLAN_TRIG_RFKILL_RELEASE,
-	NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211,
-	NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN,
-	NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023,
-	NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN,
-	NL80211_WOWLAN_TRIG_TCP_CONNECTION,
-	NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH,
-	NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST,
-	NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS,
-	NL80211_WOWLAN_TRIG_NET_DETECT,
-	NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS,
-
-	/* keep last */
-	NUM_NL80211_WOWLAN_TRIG,
-	MAX_NL80211_WOWLAN_TRIG = NUM_NL80211_WOWLAN_TRIG - 1
-};
-
-/**
- * DOC: TCP connection wakeup
- *
- * Some devices can establish a TCP connection in order to be woken up by a
- * packet coming in from outside their network segment, or behind NAT. If
- * configured, the device will establish a TCP connection to the given
- * service, and periodically send data to that service. The first data
- * packet is usually transmitted after SYN/ACK, also ACKing the SYN/ACK.
- * The data packets can optionally include a (little endian) sequence
- * number (in the TCP payload!) that is generated by the device, and, also
- * optionally, a token from a list of tokens. This serves as a keep-alive
- * with the service, and for NATed connections, etc.
- *
- * During this keep-alive period, the server doesn't send any data to the
- * client. When receiving data, it is compared against the wakeup pattern
- * (and mask) and if it matches, the host is woken up. Similarly, if the
- * connection breaks or cannot be established to start with, the host is
- * also woken up.
- *
- * Developer's note: ARP offload is required for this, otherwise TCP
- * response packets might not go through correctly.
- */
-
-/**
- * struct nl80211_wowlan_tcp_data_seq - WoWLAN TCP data sequence
- * @start: starting value
- * @offset: offset of sequence number in packet
- * @len: length of the sequence value to write, 1 through 4
- *
- * Note: don't confuse with the TCP sequence number(s), this is for the
- * keepalive packet payload. The actual value is written into the packet
- * in little endian.
- */
-struct nl80211_wowlan_tcp_data_seq {
-	__u32 start, offset, len;
-};
-
-/**
- * struct nl80211_wowlan_tcp_data_token - WoWLAN TCP data token config
- * @offset: offset of token in packet
- * @len: length of each token
- * @token_stream: stream of data to be used for the tokens, the length must
- *	be a multiple of @len for this to make sense
- */
-struct nl80211_wowlan_tcp_data_token {
-	__u32 offset, len;
-	__u8 token_stream[];
-};
-
-/**
- * struct nl80211_wowlan_tcp_data_token_feature - data token features
- * @min_len: minimum token length
- * @max_len: maximum token length
- * @bufsize: total available token buffer size (max size of @token_stream)
- */
-struct nl80211_wowlan_tcp_data_token_feature {
-	__u32 min_len, max_len, bufsize;
-};
-
-/**
- * enum nl80211_wowlan_tcp_attrs - WoWLAN TCP connection parameters
- * @__NL80211_WOWLAN_TCP_INVALID: invalid number for nested attributes
- * @NL80211_WOWLAN_TCP_SRC_IPV4: source IPv4 address (in network byte order)
- * @NL80211_WOWLAN_TCP_DST_IPV4: destination IPv4 address
- *	(in network byte order)
- * @NL80211_WOWLAN_TCP_DST_MAC: destination MAC address, this is given because
- *	route lookup when configured might be invalid by the time we suspend,
- *	and doing a route lookup when suspending is no longer possible as it
- *	might require ARP querying.
- * @NL80211_WOWLAN_TCP_SRC_PORT: source port (u16); optional, if not given a
- *	socket and port will be allocated
- * @NL80211_WOWLAN_TCP_DST_PORT: destination port (u16)
- * @NL80211_WOWLAN_TCP_DATA_PAYLOAD: data packet payload, at least one byte.
- *	For feature advertising, a u32 attribute holding the maximum length
- *	of the data payload.
- * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ: data packet sequence configuration
- *	(if desired), a &struct nl80211_wowlan_tcp_data_seq. For feature
- *	advertising it is just a flag
- * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN: data packet token configuration,
- *	see &struct nl80211_wowlan_tcp_data_token and for advertising see
- *	&struct nl80211_wowlan_tcp_data_token_feature.
- * @NL80211_WOWLAN_TCP_DATA_INTERVAL: data interval in seconds, maximum
- *	interval in feature advertising (u32)
- * @NL80211_WOWLAN_TCP_WAKE_PAYLOAD: wake packet payload, for advertising a
- *	u32 attribute holding the maximum length
- * @NL80211_WOWLAN_TCP_WAKE_MASK: Wake packet payload mask, not used for
- *	feature advertising. The mask works like @NL80211_PKTPAT_MASK
- *	but on the TCP payload only.
- * @NUM_NL80211_WOWLAN_TCP: number of TCP attributes
- * @MAX_NL80211_WOWLAN_TCP: highest attribute number
- */
-enum nl80211_wowlan_tcp_attrs {
-	__NL80211_WOWLAN_TCP_INVALID,
-	NL80211_WOWLAN_TCP_SRC_IPV4,
-	NL80211_WOWLAN_TCP_DST_IPV4,
-	NL80211_WOWLAN_TCP_DST_MAC,
-	NL80211_WOWLAN_TCP_SRC_PORT,
-	NL80211_WOWLAN_TCP_DST_PORT,
-	NL80211_WOWLAN_TCP_DATA_PAYLOAD,
-	NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ,
-	NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN,
-	NL80211_WOWLAN_TCP_DATA_INTERVAL,
-	NL80211_WOWLAN_TCP_WAKE_PAYLOAD,
-	NL80211_WOWLAN_TCP_WAKE_MASK,
-
-	/* keep last */
-	NUM_NL80211_WOWLAN_TCP,
-	MAX_NL80211_WOWLAN_TCP = NUM_NL80211_WOWLAN_TCP - 1
-};
-
-/**
- * struct nl80211_coalesce_rule_support - coalesce rule support information
- * @max_rules: maximum number of rules supported
- * @pat: packet pattern support information
- * @max_delay: maximum supported coalescing delay in msecs
- *
- * This struct is carried in %NL80211_ATTR_COALESCE_RULE in the
- * capability information given by the kernel to userspace.
- */
-struct nl80211_coalesce_rule_support {
-	__u32 max_rules;
-	struct nl80211_pattern_support pat;
-	__u32 max_delay;
-} __attribute__((packed));
-
-/**
- * enum nl80211_attr_coalesce_rule - coalesce rule attribute
- * @__NL80211_COALESCE_RULE_INVALID: invalid number for nested attribute
- * @NL80211_ATTR_COALESCE_RULE_DELAY: delay in msecs used for packet coalescing
- * @NL80211_ATTR_COALESCE_RULE_CONDITION: condition for packet coalescence,
- *	see &enum nl80211_coalesce_condition.
- * @NL80211_ATTR_COALESCE_RULE_PKT_PATTERN: packet offset, pattern is matched
- *	after these fixed number of bytes of received packet
- * @NUM_NL80211_ATTR_COALESCE_RULE: number of attributes
- * @NL80211_ATTR_COALESCE_RULE_MAX: max attribute number
- */
-enum nl80211_attr_coalesce_rule {
-	__NL80211_COALESCE_RULE_INVALID,
-	NL80211_ATTR_COALESCE_RULE_DELAY,
-	NL80211_ATTR_COALESCE_RULE_CONDITION,
-	NL80211_ATTR_COALESCE_RULE_PKT_PATTERN,
-
-	/* keep last */
-	NUM_NL80211_ATTR_COALESCE_RULE,
-	NL80211_ATTR_COALESCE_RULE_MAX = NUM_NL80211_ATTR_COALESCE_RULE - 1
-};
-
-/**
- * enum nl80211_coalesce_condition - coalesce rule conditions
- * @NL80211_COALESCE_CONDITION_MATCH: coalaesce Rx packets when patterns
- *	in a rule are matched.
- * @NL80211_COALESCE_CONDITION_NO_MATCH: coalesce Rx packets when patterns
- *	in a rule are not matched.
- */
-enum nl80211_coalesce_condition {
-	NL80211_COALESCE_CONDITION_MATCH,
-	NL80211_COALESCE_CONDITION_NO_MATCH
-};
-
-/**
- * enum nl80211_iface_limit_attrs - limit attributes
- * @NL80211_IFACE_LIMIT_UNSPEC: (reserved)
- * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that
- *	can be chosen from this set of interface types (u32)
- * @NL80211_IFACE_LIMIT_TYPES: nested attribute containing a
- *	flag attribute for each interface type in this set
- * @NUM_NL80211_IFACE_LIMIT: number of attributes
- * @MAX_NL80211_IFACE_LIMIT: highest attribute number
- */
-enum nl80211_iface_limit_attrs {
-	NL80211_IFACE_LIMIT_UNSPEC,
-	NL80211_IFACE_LIMIT_MAX,
-	NL80211_IFACE_LIMIT_TYPES,
-
-	/* keep last */
-	NUM_NL80211_IFACE_LIMIT,
-	MAX_NL80211_IFACE_LIMIT = NUM_NL80211_IFACE_LIMIT - 1
-};
-
-/**
- * enum nl80211_if_combination_attrs -- interface combination attributes
- *
- * @NL80211_IFACE_COMB_UNSPEC: (reserved)
- * @NL80211_IFACE_COMB_LIMITS: Nested attributes containing the limits
- *	for given interface types, see &enum nl80211_iface_limit_attrs.
- * @NL80211_IFACE_COMB_MAXNUM: u32 attribute giving the total number of
- *	interfaces that can be created in this group. This number doesn't
- *	apply to interfaces purely managed in software, which are listed
- *	in a separate attribute %NL80211_ATTR_INTERFACES_SOFTWARE.
- * @NL80211_IFACE_COMB_STA_AP_BI_MATCH: flag attribute specifying that
- *	beacon intervals within this group must be all the same even for
- *	infrastructure and AP/GO combinations, i.e. the GO(s) must adopt
- *	the infrastructure network's beacon interval.
- * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many
- *	different channels may be used within this group.
- * @NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS: u32 attribute containing the bitmap
- *	of supported channel widths for radar detection.
- * @NL80211_IFACE_COMB_RADAR_DETECT_REGIONS: u32 attribute containing the bitmap
- *	of supported regulatory regions for radar detection.
- * @NL80211_IFACE_COMB_BI_MIN_GCD: u32 attribute specifying the minimum GCD of
- *	different beacon intervals supported by all the interface combinations
- *	in this group (if not present, all beacon intervals be identical).
- * @NUM_NL80211_IFACE_COMB: number of attributes
- * @MAX_NL80211_IFACE_COMB: highest attribute number
- *
- * Examples:
- *	limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2
- *	=> allows an AP and a STA that must match BIs
- *
- *	numbers = [ #{AP, P2P-GO} <= 8 ], BI min gcd, channels = 1, max = 8,
- *	=> allows 8 of AP/GO that can have BI gcd >= min gcd
- *
- *	numbers = [ #{STA} <= 2 ], channels = 2, max = 2
- *	=> allows two STAs on different channels
- *
- *	numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4
- *	=> allows a STA plus three P2P interfaces
- *
- * The list of these four possibilities could completely be contained
- * within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate
- * that any of these groups must match.
- *
- * "Combinations" of just a single interface will not be listed here,
- * a single interface of any valid interface type is assumed to always
- * be possible by itself. This means that implicitly, for each valid
- * interface type, the following group always exists:
- *	numbers = [ #{<type>} <= 1 ], channels = 1, max = 1
- */
-enum nl80211_if_combination_attrs {
-	NL80211_IFACE_COMB_UNSPEC,
-	NL80211_IFACE_COMB_LIMITS,
-	NL80211_IFACE_COMB_MAXNUM,
-	NL80211_IFACE_COMB_STA_AP_BI_MATCH,
-	NL80211_IFACE_COMB_NUM_CHANNELS,
-	NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS,
-	NL80211_IFACE_COMB_RADAR_DETECT_REGIONS,
-	NL80211_IFACE_COMB_BI_MIN_GCD,
-
-	/* keep last */
-	NUM_NL80211_IFACE_COMB,
-	MAX_NL80211_IFACE_COMB = NUM_NL80211_IFACE_COMB - 1
-};
-
-
-/**
- * enum nl80211_plink_state - state of a mesh peer link finite state machine
- *
- * @NL80211_PLINK_LISTEN: initial state, considered the implicit
- *	state of non existent mesh peer links
- * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to
- *	this mesh peer
- * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received
- *	from this mesh peer
- * @NL80211_PLINK_CNF_RCVD: mesh plink confirm frame has been
- *	received from this mesh peer
- * @NL80211_PLINK_ESTAB: mesh peer link is established
- * @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled
- * @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh
- *	plink are discarded
- * @NUM_NL80211_PLINK_STATES: number of peer link states
- * @MAX_NL80211_PLINK_STATES: highest numerical value of plink states
- */
-enum nl80211_plink_state {
-	NL80211_PLINK_LISTEN,
-	NL80211_PLINK_OPN_SNT,
-	NL80211_PLINK_OPN_RCVD,
-	NL80211_PLINK_CNF_RCVD,
-	NL80211_PLINK_ESTAB,
-	NL80211_PLINK_HOLDING,
-	NL80211_PLINK_BLOCKED,
-
-	/* keep last */
-	NUM_NL80211_PLINK_STATES,
-	MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1
-};
-
-/**
- * enum nl80211_plink_action - actions to perform in mesh peers
- *
- * @NL80211_PLINK_ACTION_NO_ACTION: perform no action
- * @NL80211_PLINK_ACTION_OPEN: start mesh peer link establishment
- * @NL80211_PLINK_ACTION_BLOCK: block traffic from this mesh peer
- * @NUM_NL80211_PLINK_ACTIONS: number of possible actions
- */
-enum plink_actions {
-	NL80211_PLINK_ACTION_NO_ACTION,
-	NL80211_PLINK_ACTION_OPEN,
-	NL80211_PLINK_ACTION_BLOCK,
-
-	NUM_NL80211_PLINK_ACTIONS,
-};
-
-
-#define NL80211_KCK_LEN			16
-#define NL80211_KEK_LEN			16
-#define NL80211_REPLAY_CTR_LEN		8
-
-/**
- * enum nl80211_rekey_data - attributes for GTK rekey offload
- * @__NL80211_REKEY_DATA_INVALID: invalid number for nested attributes
- * @NL80211_REKEY_DATA_KEK: key encryption key (binary)
- * @NL80211_REKEY_DATA_KCK: key confirmation key (binary)
- * @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary)
- * @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal)
- * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal)
- */
-enum nl80211_rekey_data {
-	__NL80211_REKEY_DATA_INVALID,
-	NL80211_REKEY_DATA_KEK,
-	NL80211_REKEY_DATA_KCK,
-	NL80211_REKEY_DATA_REPLAY_CTR,
-
-	/* keep last */
-	NUM_NL80211_REKEY_DATA,
-	MAX_NL80211_REKEY_DATA = NUM_NL80211_REKEY_DATA - 1
-};
-
-/**
- * enum nl80211_hidden_ssid - values for %NL80211_ATTR_HIDDEN_SSID
- * @NL80211_HIDDEN_SSID_NOT_IN_USE: do not hide SSID (i.e., broadcast it in
- *	Beacon frames)
- * @NL80211_HIDDEN_SSID_ZERO_LEN: hide SSID by using zero-length SSID element
- *	in Beacon frames
- * @NL80211_HIDDEN_SSID_ZERO_CONTENTS: hide SSID by using correct length of SSID
- *	element in Beacon frames but zero out each byte in the SSID
- */
-enum nl80211_hidden_ssid {
-	NL80211_HIDDEN_SSID_NOT_IN_USE,
-	NL80211_HIDDEN_SSID_ZERO_LEN,
-	NL80211_HIDDEN_SSID_ZERO_CONTENTS
-};
-
-/**
- * enum nl80211_sta_wme_attr - station WME attributes
- * @__NL80211_STA_WME_INVALID: invalid number for nested attribute
- * @NL80211_STA_WME_UAPSD_QUEUES: bitmap of uapsd queues. the format
- *	is the same as the AC bitmap in the QoS info field.
- * @NL80211_STA_WME_MAX_SP: max service period. the format is the same
- *	as the MAX_SP field in the QoS info field (but already shifted down).
- * @__NL80211_STA_WME_AFTER_LAST: internal
- * @NL80211_STA_WME_MAX: highest station WME attribute
- */
-enum nl80211_sta_wme_attr {
-	__NL80211_STA_WME_INVALID,
-	NL80211_STA_WME_UAPSD_QUEUES,
-	NL80211_STA_WME_MAX_SP,
-
-	/* keep last */
-	__NL80211_STA_WME_AFTER_LAST,
-	NL80211_STA_WME_MAX = __NL80211_STA_WME_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_pmksa_candidate_attr - attributes for PMKSA caching candidates
- * @__NL80211_PMKSA_CANDIDATE_INVALID: invalid number for nested attributes
- * @NL80211_PMKSA_CANDIDATE_INDEX: candidate index (u32; the smaller, the higher
- *	priority)
- * @NL80211_PMKSA_CANDIDATE_BSSID: candidate BSSID (6 octets)
- * @NL80211_PMKSA_CANDIDATE_PREAUTH: RSN pre-authentication supported (flag)
- * @NUM_NL80211_PMKSA_CANDIDATE: number of PMKSA caching candidate attributes
- *	(internal)
- * @MAX_NL80211_PMKSA_CANDIDATE: highest PMKSA caching candidate attribute
- *	(internal)
- */
-enum nl80211_pmksa_candidate_attr {
-	__NL80211_PMKSA_CANDIDATE_INVALID,
-	NL80211_PMKSA_CANDIDATE_INDEX,
-	NL80211_PMKSA_CANDIDATE_BSSID,
-	NL80211_PMKSA_CANDIDATE_PREAUTH,
-
-	/* keep last */
-	NUM_NL80211_PMKSA_CANDIDATE,
-	MAX_NL80211_PMKSA_CANDIDATE = NUM_NL80211_PMKSA_CANDIDATE - 1
-};
-
-/**
- * enum nl80211_tdls_operation - values for %NL80211_ATTR_TDLS_OPERATION
- * @NL80211_TDLS_DISCOVERY_REQ: Send a TDLS discovery request
- * @NL80211_TDLS_SETUP: Setup TDLS link
- * @NL80211_TDLS_TEARDOWN: Teardown a TDLS link which is already established
- * @NL80211_TDLS_ENABLE_LINK: Enable TDLS link
- * @NL80211_TDLS_DISABLE_LINK: Disable TDLS link
- */
-enum nl80211_tdls_operation {
-	NL80211_TDLS_DISCOVERY_REQ,
-	NL80211_TDLS_SETUP,
-	NL80211_TDLS_TEARDOWN,
-	NL80211_TDLS_ENABLE_LINK,
-	NL80211_TDLS_DISABLE_LINK,
-};
-
-/*
- * enum nl80211_ap_sme_features - device-integrated AP features
- * Reserved for future use, no bits are defined in
- * NL80211_ATTR_DEVICE_AP_SME yet.
-enum nl80211_ap_sme_features {
-};
- */
-
-/**
- * enum nl80211_feature_flags - device/driver features
- * @NL80211_FEATURE_SK_TX_STATUS: This driver supports reflecting back
- *	TX status to the socket error queue when requested with the
- *	socket option.
- * @NL80211_FEATURE_HT_IBSS: This driver supports IBSS with HT datarates.
- * @NL80211_FEATURE_INACTIVITY_TIMER: This driver takes care of freeing up
- *	the connected inactive stations in AP mode.
- * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested
- *	to work properly to suppport receiving regulatory hints from
- *	cellular base stations.
- * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: (no longer available, only
- *	here to reserve the value for API/ABI compatibility)
- * @NL80211_FEATURE_SAE: This driver supports simultaneous authentication of
- *	equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station
- *	mode
- * @NL80211_FEATURE_LOW_PRIORITY_SCAN: This driver supports low priority scan
- * @NL80211_FEATURE_SCAN_FLUSH: Scan flush is supported
- * @NL80211_FEATURE_AP_SCAN: Support scanning using an AP vif
- * @NL80211_FEATURE_VIF_TXPOWER: The driver supports per-vif TX power setting
- * @NL80211_FEATURE_NEED_OBSS_SCAN: The driver expects userspace to perform
- *	OBSS scans and generate 20/40 BSS coex reports. This flag is used only
- *	for drivers implementing the CONNECT API, for AUTH/ASSOC it is implied.
- * @NL80211_FEATURE_P2P_GO_CTWIN: P2P GO implementation supports CT Window
- *	setting
- * @NL80211_FEATURE_P2P_GO_OPPPS: P2P GO implementation supports opportunistic
- *	powersave
- * @NL80211_FEATURE_FULL_AP_CLIENT_STATE: The driver supports full state
- *	transitions for AP clients. Without this flag (and if the driver
- *	doesn't have the AP SME in the device) the driver supports adding
- *	stations only when they're associated and adds them in associated
- *	state (to later be transitioned into authorized), with this flag
- *	they should be added before even sending the authentication reply
- *	and then transitioned into authenticated, associated and authorized
- *	states using station flags.
- *	Note that even for drivers that support this, the default is to add
- *	stations in authenticated/associated state, so to add unauthenticated
- *	stations the authenticated/associated bits have to be set in the mask.
- * @NL80211_FEATURE_ADVERTISE_CHAN_LIMITS: cfg80211 advertises channel limits
- *	(HT40, VHT 80/160 MHz) if this flag is set
- * @NL80211_FEATURE_USERSPACE_MPM: This driver supports a userspace Mesh
- *	Peering Management entity which may be implemented by registering for
- *	beacons or NL80211_CMD_NEW_PEER_CANDIDATE events. The mesh beacon is
- *	still generated by the driver.
- * @NL80211_FEATURE_ACTIVE_MONITOR: This driver supports an active monitor
- *	interface. An active monitor interface behaves like a normal monitor
- *	interface, but gets added to the driver. It ensures that incoming
- *	unicast packets directed at the configured interface address get ACKed.
- * @NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE: This driver supports dynamic
- *	channel bandwidth change (e.g., HT 20 <-> 40 MHz channel) during the
- *	lifetime of a BSS.
- * @NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES: This device adds a DS Parameter
- *	Set IE to probe requests.
- * @NL80211_FEATURE_WFA_TPC_IE_IN_PROBES: This device adds a WFA TPC Report IE
- *	to probe requests.
- * @NL80211_FEATURE_QUIET: This device, in client mode, supports Quiet Period
- *	requests sent to it by an AP.
- * @NL80211_FEATURE_TX_POWER_INSERTION: This device is capable of inserting the
- *	current tx power value into the TPC Report IE in the spectrum
- *	management TPC Report action frame, and in the Radio Measurement Link
- *	Measurement Report action frame.
- * @NL80211_FEATURE_ACKTO_ESTIMATION: This driver supports dynamic ACK timeout
- *	estimation (dynack). %NL80211_ATTR_WIPHY_DYN_ACK flag attribute is used
- *	to enable dynack.
- * @NL80211_FEATURE_STATIC_SMPS: Device supports static spatial
- *	multiplexing powersave, ie. can turn off all but one chain
- *	even on HT connections that should be using more chains.
- * @NL80211_FEATURE_DYNAMIC_SMPS: Device supports dynamic spatial
- *	multiplexing powersave, ie. can turn off all but one chain
- *	and then wake the rest up as required after, for example,
- *	rts/cts handshake.
- * @NL80211_FEATURE_SUPPORTS_WMM_ADMISSION: the device supports setting up WMM
- *	TSPEC sessions (TID aka TSID 0-7) with the %NL80211_CMD_ADD_TX_TS
- *	command. Standard IEEE 802.11 TSPEC setup is not yet supported, it
- *	needs to be able to handle Block-Ack agreements and other things.
- * @NL80211_FEATURE_MAC_ON_CREATE: Device supports configuring
- *	the vif's MAC address upon creation.
- *	See 'macaddr' field in the vif_params (cfg80211.h).
- * @NL80211_FEATURE_TDLS_CHANNEL_SWITCH: Driver supports channel switching when
- *	operating as a TDLS peer.
- * @NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR: This device/driver supports using a
- *	random MAC address during scan (if the device is unassociated); the
- *	%NL80211_SCAN_FLAG_RANDOM_ADDR flag may be set for scans and the MAC
- *	address mask/value will be used.
- * @NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR: This device/driver supports
- *	using a random MAC address for every scan iteration during scheduled
- *	scan (while not associated), the %NL80211_SCAN_FLAG_RANDOM_ADDR may
- *	be set for scheduled scan and the MAC address mask/value will be used.
- * @NL80211_FEATURE_ND_RANDOM_MAC_ADDR: This device/driver supports using a
- *	random MAC address for every scan iteration during "net detect", i.e.
- *	scan in unassociated WoWLAN, the %NL80211_SCAN_FLAG_RANDOM_ADDR may
- *	be set for scheduled scan and the MAC address mask/value will be used.
- */
-enum nl80211_feature_flags {
-	NL80211_FEATURE_SK_TX_STATUS			= 1 << 0,
-	NL80211_FEATURE_HT_IBSS				= 1 << 1,
-	NL80211_FEATURE_INACTIVITY_TIMER		= 1 << 2,
-	NL80211_FEATURE_CELL_BASE_REG_HINTS		= 1 << 3,
-	NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL	= 1 << 4,
-	NL80211_FEATURE_SAE				= 1 << 5,
-	NL80211_FEATURE_LOW_PRIORITY_SCAN		= 1 << 6,
-	NL80211_FEATURE_SCAN_FLUSH			= 1 << 7,
-	NL80211_FEATURE_AP_SCAN				= 1 << 8,
-	NL80211_FEATURE_VIF_TXPOWER			= 1 << 9,
-	NL80211_FEATURE_NEED_OBSS_SCAN			= 1 << 10,
-	NL80211_FEATURE_P2P_GO_CTWIN			= 1 << 11,
-	NL80211_FEATURE_P2P_GO_OPPPS			= 1 << 12,
-	/* bit 13 is reserved */
-	NL80211_FEATURE_ADVERTISE_CHAN_LIMITS		= 1 << 14,
-	NL80211_FEATURE_FULL_AP_CLIENT_STATE		= 1 << 15,
-	NL80211_FEATURE_USERSPACE_MPM			= 1 << 16,
-	NL80211_FEATURE_ACTIVE_MONITOR			= 1 << 17,
-	NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE	= 1 << 18,
-	NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES	= 1 << 19,
-	NL80211_FEATURE_WFA_TPC_IE_IN_PROBES		= 1 << 20,
-	NL80211_FEATURE_QUIET				= 1 << 21,
-	NL80211_FEATURE_TX_POWER_INSERTION		= 1 << 22,
-	NL80211_FEATURE_ACKTO_ESTIMATION		= 1 << 23,
-	NL80211_FEATURE_STATIC_SMPS			= 1 << 24,
-	NL80211_FEATURE_DYNAMIC_SMPS			= 1 << 25,
-	NL80211_FEATURE_SUPPORTS_WMM_ADMISSION		= 1 << 26,
-	NL80211_FEATURE_MAC_ON_CREATE			= 1 << 27,
-	NL80211_FEATURE_TDLS_CHANNEL_SWITCH		= 1 << 28,
-	NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR		= 1 << 29,
-	NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR	= 1 << 30,
-	NL80211_FEATURE_ND_RANDOM_MAC_ADDR		= 1U << 31,
-};
-
-/**
- * enum nl80211_ext_feature_index - bit index of extended features.
- * @NL80211_EXT_FEATURE_VHT_IBSS: This driver supports IBSS with VHT datarates.
- * @NL80211_EXT_FEATURE_RRM: This driver supports RRM. When featured, user can
- *	can request to use RRM (see %NL80211_ATTR_USE_RRM) with
- *	%NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests, which will set
- *	the ASSOC_REQ_USE_RRM flag in the association request even if
- *	NL80211_FEATURE_QUIET is not advertized.
- * @NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER: This device supports MU-MIMO air
- *	sniffer which means that it can be configured to hear packets from
- *	certain groups which can be configured by the
- *	%NL80211_ATTR_MU_MIMO_GROUP_DATA attribute,
- *	or can be configured to follow a station by configuring the
- *	%NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR attribute.
- * @NL80211_EXT_FEATURE_SCAN_START_TIME: This driver includes the actual
- *	time the scan started in scan results event. The time is the TSF of
- *	the BSS that the interface that requested the scan is connected to
- *	(if available).
- * @NL80211_EXT_FEATURE_BSS_PARENT_TSF: Per BSS, this driver reports the
- *	time the last beacon/probe was received. The time is the TSF of the
- *	BSS that the interface that requested the scan is connected to
- *	(if available).
- * @NL80211_EXT_FEATURE_SET_SCAN_DWELL: This driver supports configuration of
- *	channel dwell time.
- * @NL80211_EXT_FEATURE_BEACON_RATE_LEGACY: Driver supports beacon rate
- *	configuration (AP/mesh), supporting a legacy (non HT/VHT) rate.
- * @NL80211_EXT_FEATURE_BEACON_RATE_HT: Driver supports beacon rate
- *	configuration (AP/mesh) with HT rates.
- * @NL80211_EXT_FEATURE_BEACON_RATE_VHT: Driver supports beacon rate
- *	configuration (AP/mesh) with VHT rates.
- * @NL80211_EXT_FEATURE_FILS_STA: This driver supports Fast Initial Link Setup
- *	with user space SME (NL80211_CMD_AUTHENTICATE) in station mode.
- * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA: This driver supports randomized TA
- *	in @NL80211_CMD_FRAME while not associated.
- * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED: This driver supports
- *	randomized TA in @NL80211_CMD_FRAME while associated.
- * @NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI: The driver supports sched_scan
- *	for reporting BSSs with better RSSI than the current connected BSS
- *	(%NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI).
- * @NL80211_EXT_FEATURE_CQM_RSSI_LIST: With this driver the
- *	%NL80211_ATTR_CQM_RSSI_THOLD attribute accepts a list of zero or more
- *	RSSI threshold values to monitor rather than exactly one threshold.
- * @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD: Driver SME supports FILS shared key
- *	authentication with %NL80211_CMD_CONNECT.
- * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK: Device wants to do 4-way
- *	handshake with PSK in station mode (PSK is passed as part of the connect
- *	and associate commands), doing it in the host might not be supported.
- * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X: Device wants to do doing 4-way
- *	handshake with 802.1X in station mode (will pass EAP frames to the host
- *	and accept the set_pmk/del_pmk commands), doing it in the host might not
- *	be supported.
- * @NL80211_EXT_FEATURE_FILS_MAX_CHANNEL_TIME: Driver is capable of overriding
- *	the max channel attribute in the FILS request params IE with the
- *	actual dwell time.
- * @NL80211_EXT_FEATURE_ACCEPT_BCAST_PROBE_RESP: Driver accepts broadcast probe
- *	response
- * @NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE: Driver supports sending
- *	the first probe request in each channel at rate of at least 5.5Mbps.
- * @NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: Driver supports
- *	probe request tx deferral and suppression
- * @NL80211_EXT_FEATURE_MFP_OPTIONAL: Driver supports the %NL80211_MFP_OPTIONAL
- *	value in %NL80211_ATTR_USE_MFP.
- * @NL80211_EXT_FEATURE_LOW_SPAN_SCAN: Driver supports low span scan.
- * @NL80211_EXT_FEATURE_LOW_POWER_SCAN: Driver supports low power scan.
- * @NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN: Driver supports high accuracy scan.
- * @NL80211_EXT_FEATURE_DFS_OFFLOAD: HW/driver will offload DFS actions.
- *	Device or driver will do all DFS-related actions by itself,
- *	informing user-space about CAC progress, radar detection event,
- *	channel change triggered by radar detection event.
- *	No need to start CAC from user-space, no need to react to
- *	"radar detected" event.
- * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211: Driver supports sending and
- *	receiving control port frames over nl80211 instead of the netdevice.
- * @NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT: This driver/device supports
- *	(average) ACK signal strength reporting.
- * @NL80211_EXT_FEATURE_TXQS: Driver supports FQ-CoDel-enabled intermediate
- *      TXQs.
- * @NL80211_EXT_FEATURE_SCAN_RANDOM_SN: Driver/device supports randomizing the
- *	SN in probe request frames if requested by %NL80211_SCAN_FLAG_RANDOM_SN.
- * @NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT: Driver/device can omit all data
- *	except for supported rates from the probe request content if requested
- *	by the %NL80211_SCAN_FLAG_MIN_PREQ_CONTENT flag.
- * @NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER: Driver supports enabling fine
- *	timing measurement responder role.
- *
- * @NL80211_EXT_FEATURE_CAN_REPLACE_PTK0: Driver/device confirm that they are
- *      able to rekey an in-use key correctly. Userspace must not rekey PTK keys
- *      if this flag is not set. Ignoring this can leak clear text packets and/or
- *      freeze the connection.
- * @NL80211_EXT_FEATURE_EXT_KEY_ID: Driver supports "Extended Key ID for
- *      Individually Addressed Frames" from IEEE802.11-2016.
- *
- * @NL80211_EXT_FEATURE_AIRTIME_FAIRNESS: Driver supports getting airtime
- *	fairness for transmitted packets and has enabled airtime fairness
- *	scheduling.
- *
- * @NL80211_EXT_FEATURE_AP_PMKSA_CACHING: Driver/device supports PMKSA caching
- *	(set/del PMKSA operations) in AP mode.
- *
- * @NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD: Driver supports
- *	filtering of sched scan results using band specific RSSI thresholds.
- *
- * @NL80211_EXT_FEATURE_STA_TX_PWR: This driver supports controlling tx power
- *	to a station.
- *
- * @NL80211_EXT_FEATURE_SAE_OFFLOAD: Device wants to do SAE authentication in
- *	station mode (SAE password is passed as part of the connect command).
- *
- * @NL80211_EXT_FEATURE_VLAN_OFFLOAD: The driver supports a single netdev
- *	with VLAN tagged frames and separate VLAN-specific netdevs added using
- *	vconfig similarly to the Ethernet case.
- *
- * @NL80211_EXT_FEATURE_AQL: The driver supports the Airtime Queue Limit (AQL)
- *	feature, which prevents bufferbloat by using the expected transmission
- *	time to limit the amount of data buffered in the hardware.
- *
- * @NL80211_EXT_FEATURE_BEACON_PROTECTION: The driver supports Beacon protection
- *	and can receive key configuration for BIGTK using key indexes 6 and 7.
- *
- * @NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH: The driver can disable the
- *	forwarding of preauth frames over the control port. They are then
- *	handled as ordinary data frames.
- *
- * @NL80211_EXT_FEATURE_PROTECTED_TWT: Driver supports protected TWT frames
- *
- * @NL80211_EXT_FEATURE_DEL_IBSS_STA: The driver supports removing stations
- *      in IBSS mode, essentially by dropping their state.
- *
- * @NUM_NL80211_EXT_FEATURES: number of extended features.
- * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
- */
-enum nl80211_ext_feature_index {
-	NL80211_EXT_FEATURE_VHT_IBSS,
-	NL80211_EXT_FEATURE_RRM,
-	NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER,
-	NL80211_EXT_FEATURE_SCAN_START_TIME,
-	NL80211_EXT_FEATURE_BSS_PARENT_TSF,
-	NL80211_EXT_FEATURE_SET_SCAN_DWELL,
-	NL80211_EXT_FEATURE_BEACON_RATE_LEGACY,
-	NL80211_EXT_FEATURE_BEACON_RATE_HT,
-	NL80211_EXT_FEATURE_BEACON_RATE_VHT,
-	NL80211_EXT_FEATURE_FILS_STA,
-	NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA,
-	NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED,
-	NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI,
-	NL80211_EXT_FEATURE_CQM_RSSI_LIST,
-	NL80211_EXT_FEATURE_FILS_SK_OFFLOAD,
-	NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK,
-	NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X,
-	NL80211_EXT_FEATURE_FILS_MAX_CHANNEL_TIME,
-	NL80211_EXT_FEATURE_ACCEPT_BCAST_PROBE_RESP,
-	NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE,
-	NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION,
-	NL80211_EXT_FEATURE_MFP_OPTIONAL,
-	NL80211_EXT_FEATURE_LOW_SPAN_SCAN,
-	NL80211_EXT_FEATURE_LOW_POWER_SCAN,
-	NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN,
-	NL80211_EXT_FEATURE_DFS_OFFLOAD,
-	NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211,
-	NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT,
-	/* we renamed this - stay compatible */
-	NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT = NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT,
-	NL80211_EXT_FEATURE_TXQS,
-	NL80211_EXT_FEATURE_SCAN_RANDOM_SN,
-	NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT,
-	NL80211_EXT_FEATURE_CAN_REPLACE_PTK0,
-	NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER,
-	NL80211_EXT_FEATURE_AIRTIME_FAIRNESS,
-	NL80211_EXT_FEATURE_AP_PMKSA_CACHING,
-	NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD,
-	NL80211_EXT_FEATURE_EXT_KEY_ID,
-	NL80211_EXT_FEATURE_STA_TX_PWR,
-	NL80211_EXT_FEATURE_SAE_OFFLOAD,
-	NL80211_EXT_FEATURE_VLAN_OFFLOAD,
-	NL80211_EXT_FEATURE_AQL,
-	NL80211_EXT_FEATURE_BEACON_PROTECTION,
-	NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH,
-	NL80211_EXT_FEATURE_PROTECTED_TWT,
-	NL80211_EXT_FEATURE_DEL_IBSS_STA,
-
-	/* add new features before the definition below */
-	NUM_NL80211_EXT_FEATURES,
-	MAX_NL80211_EXT_FEATURES = NUM_NL80211_EXT_FEATURES - 1
-};
-
-/**
- * enum nl80211_probe_resp_offload_support_attr - optional supported
- *	protocols for probe-response offloading by the driver/FW.
- *	To be used with the %NL80211_ATTR_PROBE_RESP_OFFLOAD attribute.
- *	Each enum value represents a bit in the bitmap of supported
- *	protocols. Typically a subset of probe-requests belonging to a
- *	supported protocol will be excluded from offload and uploaded
- *	to the host.
- *
- * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS: Support for WPS ver. 1
- * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2: Support for WPS ver. 2
- * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P: Support for P2P
- * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U: Support for 802.11u
- */
-enum nl80211_probe_resp_offload_support_attr {
-	NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS =	1<<0,
-	NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 =	1<<1,
-	NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P =	1<<2,
-	NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U =	1<<3,
-};
-
-/**
- * enum nl80211_connect_failed_reason - connection request failed reasons
- * @NL80211_CONN_FAIL_MAX_CLIENTS: Maximum number of clients that can be
- *	handled by the AP is reached.
- * @NL80211_CONN_FAIL_BLOCKED_CLIENT: Connection request is rejected due to ACL.
- */
-enum nl80211_connect_failed_reason {
-	NL80211_CONN_FAIL_MAX_CLIENTS,
-	NL80211_CONN_FAIL_BLOCKED_CLIENT,
-};
-
-/**
- * enum nl80211_timeout_reason - timeout reasons
- *
- * @NL80211_TIMEOUT_UNSPECIFIED: Timeout reason unspecified.
- * @NL80211_TIMEOUT_SCAN: Scan (AP discovery) timed out.
- * @NL80211_TIMEOUT_AUTH: Authentication timed out.
- * @NL80211_TIMEOUT_ASSOC: Association timed out.
- */
-enum nl80211_timeout_reason {
-	NL80211_TIMEOUT_UNSPECIFIED,
-	NL80211_TIMEOUT_SCAN,
-	NL80211_TIMEOUT_AUTH,
-	NL80211_TIMEOUT_ASSOC,
-};
-
-/**
- * enum nl80211_scan_flags -  scan request control flags
- *
- * Scan request control flags are used to control the handling
- * of NL80211_CMD_TRIGGER_SCAN and NL80211_CMD_START_SCHED_SCAN
- * requests.
- *
- * NL80211_SCAN_FLAG_LOW_SPAN, NL80211_SCAN_FLAG_LOW_POWER, and
- * NL80211_SCAN_FLAG_HIGH_ACCURACY flags are exclusive of each other, i.e., only
- * one of them can be used in the request.
- *
- * @NL80211_SCAN_FLAG_LOW_PRIORITY: scan request has low priority
- * @NL80211_SCAN_FLAG_FLUSH: flush cache before scanning
- * @NL80211_SCAN_FLAG_AP: force a scan even if the interface is configured
- *	as AP and the beaconing has already been configured. This attribute is
- *	dangerous because will destroy stations performance as a lot of frames
- *	will be lost while scanning off-channel, therefore it must be used only
- *	when really needed
- * @NL80211_SCAN_FLAG_RANDOM_ADDR: use a random MAC address for this scan (or
- *	for scheduled scan: a different one for every scan iteration). When the
- *	flag is set, depending on device capabilities the @NL80211_ATTR_MAC and
- *	@NL80211_ATTR_MAC_MASK attributes may also be given in which case only
- *	the masked bits will be preserved from the MAC address and the remainder
- *	randomised. If the attributes are not given full randomisation (46 bits,
- *	locally administered 1, multicast 0) is assumed.
- *	This flag must not be requested when the feature isn't supported, check
- *	the nl80211 feature flags for the device.
- * @NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME: fill the dwell time in the FILS
- *	request parameters IE in the probe request
- * @NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP: accept broadcast probe responses
- * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE: send probe request frames at
- *	rate of at least 5.5M. In case non OCE AP is discovered in the channel,
- *	only the first probe req in the channel will be sent in high rate.
- * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: allow probe request
- *	tx deferral (dot11FILSProbeDelay shall be set to 15ms)
- *	and suppression (if it has received a broadcast Probe Response frame,
- *	Beacon frame or FILS Discovery frame from an AP that the STA considers
- *	a suitable candidate for (re-)association - suitable in terms of
- *	SSID and/or RSSI.
- * @NL80211_SCAN_FLAG_LOW_SPAN: Span corresponds to the total time taken to
- *	accomplish the scan. Thus, this flag intends the driver to perform the
- *	scan request with lesser span/duration. It is specific to the driver
- *	implementations on how this is accomplished. Scan accuracy may get
- *	impacted with this flag.
- * @NL80211_SCAN_FLAG_LOW_POWER: This flag intends the scan attempts to consume
- *	optimal possible power. Drivers can resort to their specific means to
- *	optimize the power. Scan accuracy may get impacted with this flag.
- * @NL80211_SCAN_FLAG_HIGH_ACCURACY: Accuracy here intends to the extent of scan
- *	results obtained. Thus HIGH_ACCURACY scan flag aims to get maximum
- *	possible scan results. This flag hints the driver to use the best
- *	possible scan configuration to improve the accuracy in scanning.
- *	Latency and power use may get impacted with this flag.
- * @NL80211_SCAN_FLAG_RANDOM_SN: randomize the sequence number in probe
- *	request frames from this scan to avoid correlation/tracking being
- *	possible.
- * @NL80211_SCAN_FLAG_MIN_PREQ_CONTENT: minimize probe request content to
- *	only have supported rates and no additional capabilities (unless
- *	added by userspace explicitly.)
- */
-enum nl80211_scan_flags {
-	NL80211_SCAN_FLAG_LOW_PRIORITY				= 1<<0,
-	NL80211_SCAN_FLAG_FLUSH					= 1<<1,
-	NL80211_SCAN_FLAG_AP					= 1<<2,
-	NL80211_SCAN_FLAG_RANDOM_ADDR				= 1<<3,
-	NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME			= 1<<4,
-	NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP		= 1<<5,
-	NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE		= 1<<6,
-	NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION	= 1<<7,
-	NL80211_SCAN_FLAG_LOW_SPAN				= 1<<8,
-	NL80211_SCAN_FLAG_LOW_POWER				= 1<<9,
-	NL80211_SCAN_FLAG_HIGH_ACCURACY				= 1<<10,
-	NL80211_SCAN_FLAG_RANDOM_SN				= 1<<11,
-	NL80211_SCAN_FLAG_MIN_PREQ_CONTENT			= 1<<12,
-};
-
-/**
- * enum nl80211_acl_policy - access control policy
- *
- * Access control policy is applied on a MAC list set by
- * %NL80211_CMD_START_AP and %NL80211_CMD_SET_MAC_ACL, to
- * be used with %NL80211_ATTR_ACL_POLICY.
- *
- * @NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED: Deny stations which are
- *	listed in ACL, i.e. allow all the stations which are not listed
- *	in ACL to authenticate.
- * @NL80211_ACL_POLICY_DENY_UNLESS_LISTED: Allow the stations which are listed
- *	in ACL, i.e. deny all the stations which are not listed in ACL.
- */
-enum nl80211_acl_policy {
-	NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED,
-	NL80211_ACL_POLICY_DENY_UNLESS_LISTED,
-};
-
-/**
- * enum nl80211_smps_mode - SMPS mode
- *
- * Requested SMPS mode (for AP mode)
- *
- * @NL80211_SMPS_OFF: SMPS off (use all antennas).
- * @NL80211_SMPS_STATIC: static SMPS (use a single antenna)
- * @NL80211_SMPS_DYNAMIC: dynamic smps (start with a single antenna and
- *	turn on other antennas after CTS/RTS).
- */
-enum nl80211_smps_mode {
-	NL80211_SMPS_OFF,
-	NL80211_SMPS_STATIC,
-	NL80211_SMPS_DYNAMIC,
-
-	__NL80211_SMPS_AFTER_LAST,
-	NL80211_SMPS_MAX = __NL80211_SMPS_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_radar_event - type of radar event for DFS operation
- *
- * Type of event to be used with NL80211_ATTR_RADAR_EVENT to inform userspace
- * about detected radars or success of the channel available check (CAC)
- *
- * @NL80211_RADAR_DETECTED: A radar pattern has been detected. The channel is
- *	now unusable.
- * @NL80211_RADAR_CAC_FINISHED: Channel Availability Check has been finished,
- *	the channel is now available.
- * @NL80211_RADAR_CAC_ABORTED: Channel Availability Check has been aborted, no
- *	change to the channel status.
- * @NL80211_RADAR_NOP_FINISHED: The Non-Occupancy Period for this channel is
- *	over, channel becomes usable.
- * @NL80211_RADAR_PRE_CAC_EXPIRED: Channel Availability Check done on this
- *	non-operating channel is expired and no longer valid. New CAC must
- *	be done on this channel before starting the operation. This is not
- *	applicable for ETSI dfs domain where pre-CAC is valid for ever.
- * @NL80211_RADAR_CAC_STARTED: Channel Availability Check has been started,
- *	should be generated by HW if NL80211_EXT_FEATURE_DFS_OFFLOAD is enabled.
- */
-enum nl80211_radar_event {
-	NL80211_RADAR_DETECTED,
-	NL80211_RADAR_CAC_FINISHED,
-	NL80211_RADAR_CAC_ABORTED,
-	NL80211_RADAR_NOP_FINISHED,
-	NL80211_RADAR_PRE_CAC_EXPIRED,
-	NL80211_RADAR_CAC_STARTED,
-};
-
-/**
- * enum nl80211_dfs_state - DFS states for channels
- *
- * Channel states used by the DFS code.
- *
- * @NL80211_DFS_USABLE: The channel can be used, but channel availability
- *	check (CAC) must be performed before using it for AP or IBSS.
- * @NL80211_DFS_UNAVAILABLE: A radar has been detected on this channel, it
- *	is therefore marked as not available.
- * @NL80211_DFS_AVAILABLE: The channel has been CAC checked and is available.
- */
-enum nl80211_dfs_state {
-	NL80211_DFS_USABLE,
-	NL80211_DFS_UNAVAILABLE,
-	NL80211_DFS_AVAILABLE,
-};
-
-/**
- * enum enum nl80211_protocol_features - nl80211 protocol features
- * @NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP: nl80211 supports splitting
- *	wiphy dumps (if requested by the application with the attribute
- *	%NL80211_ATTR_SPLIT_WIPHY_DUMP. Also supported is filtering the
- *	wiphy dump by %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFINDEX or
- *	%NL80211_ATTR_WDEV.
- */
-enum nl80211_protocol_features {
-	NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP =	1 << 0,
-};
-
-/**
- * enum nl80211_crit_proto_id - nl80211 critical protocol identifiers
- *
- * @NL80211_CRIT_PROTO_UNSPEC: protocol unspecified.
- * @NL80211_CRIT_PROTO_DHCP: BOOTP or DHCPv6 protocol.
- * @NL80211_CRIT_PROTO_EAPOL: EAPOL protocol.
- * @NL80211_CRIT_PROTO_APIPA: APIPA protocol.
- * @NUM_NL80211_CRIT_PROTO: must be kept last.
- */
-enum nl80211_crit_proto_id {
-	NL80211_CRIT_PROTO_UNSPEC,
-	NL80211_CRIT_PROTO_DHCP,
-	NL80211_CRIT_PROTO_EAPOL,
-	NL80211_CRIT_PROTO_APIPA,
-	/* add other protocols before this one */
-	NUM_NL80211_CRIT_PROTO
-};
-
-/* maximum duration for critical protocol measures */
-#define NL80211_CRIT_PROTO_MAX_DURATION		5000 /* msec */
-
-/**
- * enum nl80211_rxmgmt_flags - flags for received management frame.
- *
- * Used by cfg80211_rx_mgmt()
- *
- * @NL80211_RXMGMT_FLAG_ANSWERED: frame was answered by device/driver.
- * @NL80211_RXMGMT_FLAG_EXTERNAL_AUTH: Host driver intends to offload
- *	the authentication. Exclusively defined for host drivers that
- *	advertises the SME functionality but would like the userspace
- *	to handle certain authentication algorithms (e.g. SAE).
- */
-enum nl80211_rxmgmt_flags {
-	NL80211_RXMGMT_FLAG_ANSWERED = 1 << 0,
-	NL80211_RXMGMT_FLAG_EXTERNAL_AUTH = 1 << 1,
-};
-
-/*
- * If this flag is unset, the lower 24 bits are an OUI, if set
- * a Linux nl80211 vendor ID is used (no such IDs are allocated
- * yet, so that's not valid so far)
- */
-#define NL80211_VENDOR_ID_IS_LINUX	0x80000000
-
-/**
- * struct nl80211_vendor_cmd_info - vendor command data
- * @vendor_id: If the %NL80211_VENDOR_ID_IS_LINUX flag is clear, then the
- *	value is a 24-bit OUI; if it is set then a separately allocated ID
- *	may be used, but no such IDs are allocated yet. New IDs should be
- *	added to this file when needed.
- * @subcmd: sub-command ID for the command
- */
-struct nl80211_vendor_cmd_info {
-	__u32 vendor_id;
-	__u32 subcmd;
-};
-
-/**
- * enum nl80211_tdls_peer_capability - TDLS peer flags.
- *
- * Used by tdls_mgmt() to determine which conditional elements need
- * to be added to TDLS Setup frames.
- *
- * @NL80211_TDLS_PEER_HT: TDLS peer is HT capable.
- * @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable.
- * @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable.
- */
-enum nl80211_tdls_peer_capability {
-	NL80211_TDLS_PEER_HT = 1<<0,
-	NL80211_TDLS_PEER_VHT = 1<<1,
-	NL80211_TDLS_PEER_WMM = 1<<2,
-};
-
-/**
- * enum nl80211_sched_scan_plan - scanning plan for scheduled scan
- * @__NL80211_SCHED_SCAN_PLAN_INVALID: attribute number 0 is reserved
- * @NL80211_SCHED_SCAN_PLAN_INTERVAL: interval between scan iterations. In
- *	seconds (u32).
- * @NL80211_SCHED_SCAN_PLAN_ITERATIONS: number of scan iterations in this
- *	scan plan (u32). The last scan plan must not specify this attribute
- *	because it will run infinitely. A value of zero is invalid as it will
- *	make the scan plan meaningless.
- * @NL80211_SCHED_SCAN_PLAN_MAX: highest scheduled scan plan attribute number
- *	currently defined
- * @__NL80211_SCHED_SCAN_PLAN_AFTER_LAST: internal use
- */
-enum nl80211_sched_scan_plan {
-	__NL80211_SCHED_SCAN_PLAN_INVALID,
-	NL80211_SCHED_SCAN_PLAN_INTERVAL,
-	NL80211_SCHED_SCAN_PLAN_ITERATIONS,
-
-	/* keep last */
-	__NL80211_SCHED_SCAN_PLAN_AFTER_LAST,
-	NL80211_SCHED_SCAN_PLAN_MAX =
-		__NL80211_SCHED_SCAN_PLAN_AFTER_LAST - 1
-};
-
-/**
- * struct nl80211_bss_select_rssi_adjust - RSSI adjustment parameters.
- *
- * @band: band of BSS that must match for RSSI value adjustment. The value
- *	of this field is according to &enum nl80211_band.
- * @delta: value used to adjust the RSSI value of matching BSS in dB.
- */
-struct nl80211_bss_select_rssi_adjust {
-	__u8 band;
-	__s8 delta;
-} __attribute__((packed));
-
-/**
- * enum nl80211_bss_select_attr - attributes for bss selection.
- *
- * @__NL80211_BSS_SELECT_ATTR_INVALID: reserved.
- * @NL80211_BSS_SELECT_ATTR_RSSI: Flag indicating only RSSI-based BSS selection
- *	is requested.
- * @NL80211_BSS_SELECT_ATTR_BAND_PREF: attribute indicating BSS
- *	selection should be done such that the specified band is preferred.
- *	When there are multiple BSS-es in the preferred band, the driver
- *	shall use RSSI-based BSS selection as a second step. The value of
- *	this attribute is according to &enum nl80211_band (u32).
- * @NL80211_BSS_SELECT_ATTR_RSSI_ADJUST: When present the RSSI level for
- *	BSS-es in the specified band is to be adjusted before doing
- *	RSSI-based BSS selection. The attribute value is a packed structure
- *	value as specified by &struct nl80211_bss_select_rssi_adjust.
- * @NL80211_BSS_SELECT_ATTR_MAX: highest bss select attribute number.
- * @__NL80211_BSS_SELECT_ATTR_AFTER_LAST: internal use.
- *
- * One and only one of these attributes are found within %NL80211_ATTR_BSS_SELECT
- * for %NL80211_CMD_CONNECT. It specifies the required BSS selection behaviour
- * which the driver shall use.
- */
-enum nl80211_bss_select_attr {
-	__NL80211_BSS_SELECT_ATTR_INVALID,
-	NL80211_BSS_SELECT_ATTR_RSSI,
-	NL80211_BSS_SELECT_ATTR_BAND_PREF,
-	NL80211_BSS_SELECT_ATTR_RSSI_ADJUST,
-
-	/* keep last */
-	__NL80211_BSS_SELECT_ATTR_AFTER_LAST,
-	NL80211_BSS_SELECT_ATTR_MAX = __NL80211_BSS_SELECT_ATTR_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_nan_function_type - NAN function type
- *
- * Defines the function type of a NAN function
- *
- * @NL80211_NAN_FUNC_PUBLISH: function is publish
- * @NL80211_NAN_FUNC_SUBSCRIBE: function is subscribe
- * @NL80211_NAN_FUNC_FOLLOW_UP: function is follow-up
- */
-enum nl80211_nan_function_type {
-	NL80211_NAN_FUNC_PUBLISH,
-	NL80211_NAN_FUNC_SUBSCRIBE,
-	NL80211_NAN_FUNC_FOLLOW_UP,
-
-	/* keep last */
-	__NL80211_NAN_FUNC_TYPE_AFTER_LAST,
-	NL80211_NAN_FUNC_MAX_TYPE = __NL80211_NAN_FUNC_TYPE_AFTER_LAST - 1,
-};
-
-/**
- * enum nl80211_nan_publish_type - NAN publish tx type
- *
- * Defines how to send publish Service Discovery Frames
- *
- * @NL80211_NAN_SOLICITED_PUBLISH: publish function is solicited
- * @NL80211_NAN_UNSOLICITED_PUBLISH: publish function is unsolicited
- */
-enum nl80211_nan_publish_type {
-	NL80211_NAN_SOLICITED_PUBLISH = 1 << 0,
-	NL80211_NAN_UNSOLICITED_PUBLISH = 1 << 1,
-};
-
-/**
- * enum nl80211_nan_func_term_reason - NAN functions termination reason
- *
- * Defines termination reasons of a NAN function
- *
- * @NL80211_NAN_FUNC_TERM_REASON_USER_REQUEST: requested by user
- * @NL80211_NAN_FUNC_TERM_REASON_TTL_EXPIRED: timeout
- * @NL80211_NAN_FUNC_TERM_REASON_ERROR: errored
- */
-enum nl80211_nan_func_term_reason {
-	NL80211_NAN_FUNC_TERM_REASON_USER_REQUEST,
-	NL80211_NAN_FUNC_TERM_REASON_TTL_EXPIRED,
-	NL80211_NAN_FUNC_TERM_REASON_ERROR,
-};
-
-#define NL80211_NAN_FUNC_SERVICE_ID_LEN 6
-#define NL80211_NAN_FUNC_SERVICE_SPEC_INFO_MAX_LEN 0xff
-#define NL80211_NAN_FUNC_SRF_MAX_LEN 0xff
-
-/**
- * enum nl80211_nan_func_attributes - NAN function attributes
- * @__NL80211_NAN_FUNC_INVALID: invalid
- * @NL80211_NAN_FUNC_TYPE: &enum nl80211_nan_function_type (u8).
- * @NL80211_NAN_FUNC_SERVICE_ID: 6 bytes of the service ID hash as
- *	specified in NAN spec. This is a binary attribute.
- * @NL80211_NAN_FUNC_PUBLISH_TYPE: relevant if the function's type is
- *	publish. Defines the transmission type for the publish Service Discovery
- *	Frame, see &enum nl80211_nan_publish_type. Its type is u8.
- * @NL80211_NAN_FUNC_PUBLISH_BCAST: relevant if the function is a solicited
- *	publish. Should the solicited publish Service Discovery Frame be sent to
- *	the NAN Broadcast address. This is a flag.
- * @NL80211_NAN_FUNC_SUBSCRIBE_ACTIVE: relevant if the function's type is
- *	subscribe. Is the subscribe active. This is a flag.
- * @NL80211_NAN_FUNC_FOLLOW_UP_ID: relevant if the function's type is follow up.
- *	The instance ID for the follow up Service Discovery Frame. This is u8.
- * @NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID: relevant if the function's type
- *	is follow up. This is a u8.
- *	The requestor instance ID for the follow up Service Discovery Frame.
- * @NL80211_NAN_FUNC_FOLLOW_UP_DEST: the MAC address of the recipient of the
- *	follow up Service Discovery Frame. This is a binary attribute.
- * @NL80211_NAN_FUNC_CLOSE_RANGE: is this function limited for devices in a
- *	close range. The range itself (RSSI) is defined by the device.
- *	This is a flag.
- * @NL80211_NAN_FUNC_TTL: strictly positive number of DWs this function should
- *	stay active. If not present infinite TTL is assumed. This is a u32.
- * @NL80211_NAN_FUNC_SERVICE_INFO: array of bytes describing the service
- *	specific info. This is a binary attribute.
- * @NL80211_NAN_FUNC_SRF: Service Receive Filter. This is a nested attribute.
- *	See &enum nl80211_nan_srf_attributes.
- * @NL80211_NAN_FUNC_RX_MATCH_FILTER: Receive Matching filter. This is a nested
- *	attribute. It is a list of binary values.
- * @NL80211_NAN_FUNC_TX_MATCH_FILTER: Transmit Matching filter. This is a
- *	nested attribute. It is a list of binary values.
- * @NL80211_NAN_FUNC_INSTANCE_ID: The instance ID of the function.
- *	Its type is u8 and it cannot be 0.
- * @NL80211_NAN_FUNC_TERM_REASON: NAN function termination reason.
- *	See &enum nl80211_nan_func_term_reason.
- *
- * @NUM_NL80211_NAN_FUNC_ATTR: internal
- * @NL80211_NAN_FUNC_ATTR_MAX: highest NAN function attribute
- */
-enum nl80211_nan_func_attributes {
-	__NL80211_NAN_FUNC_INVALID,
-	NL80211_NAN_FUNC_TYPE,
-	NL80211_NAN_FUNC_SERVICE_ID,
-	NL80211_NAN_FUNC_PUBLISH_TYPE,
-	NL80211_NAN_FUNC_PUBLISH_BCAST,
-	NL80211_NAN_FUNC_SUBSCRIBE_ACTIVE,
-	NL80211_NAN_FUNC_FOLLOW_UP_ID,
-	NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID,
-	NL80211_NAN_FUNC_FOLLOW_UP_DEST,
-	NL80211_NAN_FUNC_CLOSE_RANGE,
-	NL80211_NAN_FUNC_TTL,
-	NL80211_NAN_FUNC_SERVICE_INFO,
-	NL80211_NAN_FUNC_SRF,
-	NL80211_NAN_FUNC_RX_MATCH_FILTER,
-	NL80211_NAN_FUNC_TX_MATCH_FILTER,
-	NL80211_NAN_FUNC_INSTANCE_ID,
-	NL80211_NAN_FUNC_TERM_REASON,
-
-	/* keep last */
-	NUM_NL80211_NAN_FUNC_ATTR,
-	NL80211_NAN_FUNC_ATTR_MAX = NUM_NL80211_NAN_FUNC_ATTR - 1
-};
-
-/**
- * enum nl80211_nan_srf_attributes - NAN Service Response filter attributes
- * @__NL80211_NAN_SRF_INVALID: invalid
- * @NL80211_NAN_SRF_INCLUDE: present if the include bit of the SRF set.
- *	This is a flag.
- * @NL80211_NAN_SRF_BF: Bloom Filter. Present if and only if
- *	%NL80211_NAN_SRF_MAC_ADDRS isn't present. This attribute is binary.
- * @NL80211_NAN_SRF_BF_IDX: index of the Bloom Filter. Mandatory if
- *	%NL80211_NAN_SRF_BF is present. This is a u8.
- * @NL80211_NAN_SRF_MAC_ADDRS: list of MAC addresses for the SRF. Present if
- *	and only if %NL80211_NAN_SRF_BF isn't present. This is a nested
- *	attribute. Each nested attribute is a MAC address.
- * @NUM_NL80211_NAN_SRF_ATTR: internal
- * @NL80211_NAN_SRF_ATTR_MAX: highest NAN SRF attribute
- */
-enum nl80211_nan_srf_attributes {
-	__NL80211_NAN_SRF_INVALID,
-	NL80211_NAN_SRF_INCLUDE,
-	NL80211_NAN_SRF_BF,
-	NL80211_NAN_SRF_BF_IDX,
-	NL80211_NAN_SRF_MAC_ADDRS,
-
-	/* keep last */
-	NUM_NL80211_NAN_SRF_ATTR,
-	NL80211_NAN_SRF_ATTR_MAX = NUM_NL80211_NAN_SRF_ATTR - 1,
-};
-
-/**
- * enum nl80211_nan_match_attributes - NAN match attributes
- * @__NL80211_NAN_MATCH_INVALID: invalid
- * @NL80211_NAN_MATCH_FUNC_LOCAL: the local function that had the
- *	match. This is a nested attribute.
- *	See &enum nl80211_nan_func_attributes.
- * @NL80211_NAN_MATCH_FUNC_PEER: the peer function
- *	that caused the match. This is a nested attribute.
- *	See &enum nl80211_nan_func_attributes.
- *
- * @NUM_NL80211_NAN_MATCH_ATTR: internal
- * @NL80211_NAN_MATCH_ATTR_MAX: highest NAN match attribute
- */
-enum nl80211_nan_match_attributes {
-	__NL80211_NAN_MATCH_INVALID,
-	NL80211_NAN_MATCH_FUNC_LOCAL,
-	NL80211_NAN_MATCH_FUNC_PEER,
-
-	/* keep last */
-	NUM_NL80211_NAN_MATCH_ATTR,
-	NL80211_NAN_MATCH_ATTR_MAX = NUM_NL80211_NAN_MATCH_ATTR - 1
-};
-
-/**
- * nl80211_external_auth_action - Action to perform with external
- *     authentication request. Used by NL80211_ATTR_EXTERNAL_AUTH_ACTION.
- * @NL80211_EXTERNAL_AUTH_START: Start the authentication.
- * @NL80211_EXTERNAL_AUTH_ABORT: Abort the ongoing authentication.
- */
-enum nl80211_external_auth_action {
-	NL80211_EXTERNAL_AUTH_START,
-	NL80211_EXTERNAL_AUTH_ABORT,
-};
-
-/**
- * enum nl80211_ftm_responder_attributes - fine timing measurement
- *	responder attributes
- * @__NL80211_FTM_RESP_ATTR_INVALID: Invalid
- * @NL80211_FTM_RESP_ATTR_ENABLED: FTM responder is enabled
- * @NL80211_FTM_RESP_ATTR_LCI: The content of Measurement Report Element
- *	(9.4.2.22 in 802.11-2016) with type 8 - LCI (9.4.2.22.10),
- *	i.e. starting with the measurement token
- * @NL80211_FTM_RESP_ATTR_CIVIC: The content of Measurement Report Element
- *	(9.4.2.22 in 802.11-2016) with type 11 - Civic (Section 9.4.2.22.13),
- *	i.e. starting with the measurement token
- * @__NL80211_FTM_RESP_ATTR_LAST: Internal
- * @NL80211_FTM_RESP_ATTR_MAX: highest FTM responder attribute.
- */
-enum nl80211_ftm_responder_attributes {
-	__NL80211_FTM_RESP_ATTR_INVALID,
-
-	NL80211_FTM_RESP_ATTR_ENABLED,
-	NL80211_FTM_RESP_ATTR_LCI,
-	NL80211_FTM_RESP_ATTR_CIVICLOC,
-
-	/* keep last */
-	__NL80211_FTM_RESP_ATTR_LAST,
-	NL80211_FTM_RESP_ATTR_MAX = __NL80211_FTM_RESP_ATTR_LAST - 1,
-};
-
-/*
- * enum nl80211_ftm_responder_stats - FTM responder statistics
- *
- * These attribute types are used with %NL80211_ATTR_FTM_RESPONDER_STATS
- * when getting FTM responder statistics.
- *
- * @__NL80211_FTM_STATS_INVALID: attribute number 0 is reserved
- * @NL80211_FTM_STATS_SUCCESS_NUM: number of FTM sessions in which all frames
- *	were ssfully answered (u32)
- * @NL80211_FTM_STATS_PARTIAL_NUM: number of FTM sessions in which part of the
- *	frames were successfully answered (u32)
- * @NL80211_FTM_STATS_FAILED_NUM: number of failed FTM sessions (u32)
- * @NL80211_FTM_STATS_ASAP_NUM: number of ASAP sessions (u32)
- * @NL80211_FTM_STATS_NON_ASAP_NUM: number of non-ASAP sessions (u32)
- * @NL80211_FTM_STATS_TOTAL_DURATION_MSEC: total sessions durations - gives an
- *	indication of how much time the responder was busy (u64, msec)
- * @NL80211_FTM_STATS_UNKNOWN_TRIGGERS_NUM: number of unknown FTM triggers -
- *	triggers from initiators that didn't finish successfully the negotiation
- *	phase with the responder (u32)
- * @NL80211_FTM_STATS_RESCHEDULE_REQUESTS_NUM: number of FTM reschedule requests
- *	- initiator asks for a new scheduling although it already has scheduled
- *	FTM slot (u32)
- * @NL80211_FTM_STATS_OUT_OF_WINDOW_TRIGGERS_NUM: number of FTM triggers out of
- *	scheduled window (u32)
- * @NL80211_FTM_STATS_PAD: used for padding, ignore
- * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal
- * @NL80211_FTM_STATS_MAX: highest possible FTM responder stats attribute
- */
-enum nl80211_ftm_responder_stats {
-	__NL80211_FTM_STATS_INVALID,
-	NL80211_FTM_STATS_SUCCESS_NUM,
-	NL80211_FTM_STATS_PARTIAL_NUM,
-	NL80211_FTM_STATS_FAILED_NUM,
-	NL80211_FTM_STATS_ASAP_NUM,
-	NL80211_FTM_STATS_NON_ASAP_NUM,
-	NL80211_FTM_STATS_TOTAL_DURATION_MSEC,
-	NL80211_FTM_STATS_UNKNOWN_TRIGGERS_NUM,
-	NL80211_FTM_STATS_RESCHEDULE_REQUESTS_NUM,
-	NL80211_FTM_STATS_OUT_OF_WINDOW_TRIGGERS_NUM,
-	NL80211_FTM_STATS_PAD,
-
-	/* keep last */
-	__NL80211_FTM_STATS_AFTER_LAST,
-	NL80211_FTM_STATS_MAX = __NL80211_FTM_STATS_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_preamble - frame preamble types
- * @NL80211_PREAMBLE_LEGACY: legacy (HR/DSSS, OFDM, ERP PHY) preamble
- * @NL80211_PREAMBLE_HT: HT preamble
- * @NL80211_PREAMBLE_VHT: VHT preamble
- * @NL80211_PREAMBLE_DMG: DMG preamble
- * @NL80211_PREAMBLE_HE: HE preamble
- */
-enum nl80211_preamble {
-	NL80211_PREAMBLE_LEGACY,
-	NL80211_PREAMBLE_HT,
-	NL80211_PREAMBLE_VHT,
-	NL80211_PREAMBLE_DMG,
-	NL80211_PREAMBLE_HE,
-};
-
-/**
- * enum nl80211_peer_measurement_type - peer measurement types
- * @NL80211_PMSR_TYPE_INVALID: invalid/unused, needed as we use
- *	these numbers also for attributes
- *
- * @NL80211_PMSR_TYPE_FTM: flight time measurement
- *
- * @NUM_NL80211_PMSR_TYPES: internal
- * @NL80211_PMSR_TYPE_MAX: highest type number
- */
-enum nl80211_peer_measurement_type {
-	NL80211_PMSR_TYPE_INVALID,
-
-	NL80211_PMSR_TYPE_FTM,
-
-	NUM_NL80211_PMSR_TYPES,
-	NL80211_PMSR_TYPE_MAX = NUM_NL80211_PMSR_TYPES - 1
-};
-
-/**
- * enum nl80211_peer_measurement_status - peer measurement status
- * @NL80211_PMSR_STATUS_SUCCESS: measurement completed successfully
- * @NL80211_PMSR_STATUS_REFUSED: measurement was locally refused
- * @NL80211_PMSR_STATUS_TIMEOUT: measurement timed out
- * @NL80211_PMSR_STATUS_FAILURE: measurement failed, a type-dependent
- *	reason may be available in the response data
- */
-enum nl80211_peer_measurement_status {
-	NL80211_PMSR_STATUS_SUCCESS,
-	NL80211_PMSR_STATUS_REFUSED,
-	NL80211_PMSR_STATUS_TIMEOUT,
-	NL80211_PMSR_STATUS_FAILURE,
-};
-
-/**
- * enum nl80211_peer_measurement_req - peer measurement request attributes
- * @__NL80211_PMSR_REQ_ATTR_INVALID: invalid
- *
- * @NL80211_PMSR_REQ_ATTR_DATA: This is a nested attribute with measurement
- *	type-specific request data inside. The attributes used are from the
- *	enums named nl80211_peer_measurement_<type>_req.
- * @NL80211_PMSR_REQ_ATTR_GET_AP_TSF: include AP TSF timestamp, if supported
- *	(flag attribute)
- *
- * @NUM_NL80211_PMSR_REQ_ATTRS: internal
- * @NL80211_PMSR_REQ_ATTR_MAX: highest attribute number
- */
-enum nl80211_peer_measurement_req {
-	__NL80211_PMSR_REQ_ATTR_INVALID,
-
-	NL80211_PMSR_REQ_ATTR_DATA,
-	NL80211_PMSR_REQ_ATTR_GET_AP_TSF,
-
-	/* keep last */
-	NUM_NL80211_PMSR_REQ_ATTRS,
-	NL80211_PMSR_REQ_ATTR_MAX = NUM_NL80211_PMSR_REQ_ATTRS - 1
-};
-
-/**
- * enum nl80211_peer_measurement_resp - peer measurement response attributes
- * @__NL80211_PMSR_RESP_ATTR_INVALID: invalid
- *
- * @NL80211_PMSR_RESP_ATTR_DATA: This is a nested attribute with measurement
- *	type-specific results inside. The attributes used are from the enums
- *	named nl80211_peer_measurement_<type>_resp.
- * @NL80211_PMSR_RESP_ATTR_STATUS: u32 value with the measurement status
- *	(using values from &enum nl80211_peer_measurement_status.)
- * @NL80211_PMSR_RESP_ATTR_HOST_TIME: host time (%CLOCK_BOOTTIME) when the
- *	result was measured; this value is not expected to be accurate to
- *	more than 20ms. (u64, nanoseconds)
- * @NL80211_PMSR_RESP_ATTR_AP_TSF: TSF of the AP that the interface
- *	doing the measurement is connected to when the result was measured.
- *	This shall be accurately reported if supported and requested
- *	(u64, usec)
- * @NL80211_PMSR_RESP_ATTR_FINAL: If results are sent to the host partially
- *	(*e.g. with FTM per-burst data) this flag will be cleared on all but
- *	the last result; if all results are combined it's set on the single
- *	result.
- * @NL80211_PMSR_RESP_ATTR_PAD: padding for 64-bit attributes, ignore
- *
- * @NUM_NL80211_PMSR_RESP_ATTRS: internal
- * @NL80211_PMSR_RESP_ATTR_MAX: highest attribute number
- */
-enum nl80211_peer_measurement_resp {
-	__NL80211_PMSR_RESP_ATTR_INVALID,
-
-	NL80211_PMSR_RESP_ATTR_DATA,
-	NL80211_PMSR_RESP_ATTR_STATUS,
-	NL80211_PMSR_RESP_ATTR_HOST_TIME,
-	NL80211_PMSR_RESP_ATTR_AP_TSF,
-	NL80211_PMSR_RESP_ATTR_FINAL,
-	NL80211_PMSR_RESP_ATTR_PAD,
-
-	/* keep last */
-	NUM_NL80211_PMSR_RESP_ATTRS,
-	NL80211_PMSR_RESP_ATTR_MAX = NUM_NL80211_PMSR_RESP_ATTRS - 1
-};
-
-/**
- * enum nl80211_peer_measurement_peer_attrs - peer attributes for measurement
- * @__NL80211_PMSR_PEER_ATTR_INVALID: invalid
- *
- * @NL80211_PMSR_PEER_ATTR_ADDR: peer's MAC address
- * @NL80211_PMSR_PEER_ATTR_CHAN: channel definition, nested, using top-level
- *	attributes like %NL80211_ATTR_WIPHY_FREQ etc.
- * @NL80211_PMSR_PEER_ATTR_REQ: This is a nested attribute indexed by
- *	measurement type, with attributes from the
- *	&enum nl80211_peer_measurement_req inside.
- * @NL80211_PMSR_PEER_ATTR_RESP: This is a nested attribute indexed by
- *	measurement type, with attributes from the
- *	&enum nl80211_peer_measurement_resp inside.
- *
- * @NUM_NL80211_PMSR_PEER_ATTRS: internal
- * @NL80211_PMSR_PEER_ATTR_MAX: highest attribute number
- */
-enum nl80211_peer_measurement_peer_attrs {
-	__NL80211_PMSR_PEER_ATTR_INVALID,
-
-	NL80211_PMSR_PEER_ATTR_ADDR,
-	NL80211_PMSR_PEER_ATTR_CHAN,
-	NL80211_PMSR_PEER_ATTR_REQ,
-	NL80211_PMSR_PEER_ATTR_RESP,
-
-	/* keep last */
-	NUM_NL80211_PMSR_PEER_ATTRS,
-	NL80211_PMSR_PEER_ATTR_MAX = NUM_NL80211_PMSR_PEER_ATTRS - 1,
-};
-
-/**
- * enum nl80211_peer_measurement_attrs - peer measurement attributes
- * @__NL80211_PMSR_ATTR_INVALID: invalid
- *
- * @NL80211_PMSR_ATTR_MAX_PEERS: u32 attribute used for capability
- *	advertisement only, indicates the maximum number of peers
- *	measurements can be done with in a single request
- * @NL80211_PMSR_ATTR_REPORT_AP_TSF: flag attribute in capability
- *	indicating that the connected AP's TSF can be reported in
- *	measurement results
- * @NL80211_PMSR_ATTR_RANDOMIZE_MAC_ADDR: flag attribute in capability
- *	indicating that MAC address randomization is supported.
- * @NL80211_PMSR_ATTR_TYPE_CAPA: capabilities reported by the device,
- *	this contains a nesting indexed by measurement type, and
- *	type-specific capabilities inside, which are from the enums
- *	named nl80211_peer_measurement_<type>_capa.
- * @NL80211_PMSR_ATTR_PEERS: nested attribute, the nesting index is
- *	meaningless, just a list of peers to measure with, with the
- *	sub-attributes taken from
- *	&enum nl80211_peer_measurement_peer_attrs.
- *
- * @NUM_NL80211_PMSR_ATTR: internal
- * @NL80211_PMSR_ATTR_MAX: highest attribute number
- */
-enum nl80211_peer_measurement_attrs {
-	__NL80211_PMSR_ATTR_INVALID,
-
-	NL80211_PMSR_ATTR_MAX_PEERS,
-	NL80211_PMSR_ATTR_REPORT_AP_TSF,
-	NL80211_PMSR_ATTR_RANDOMIZE_MAC_ADDR,
-	NL80211_PMSR_ATTR_TYPE_CAPA,
-	NL80211_PMSR_ATTR_PEERS,
-
-	/* keep last */
-	NUM_NL80211_PMSR_ATTR,
-	NL80211_PMSR_ATTR_MAX = NUM_NL80211_PMSR_ATTR - 1
-};
-
-/**
- * enum nl80211_peer_measurement_ftm_capa - FTM capabilities
- * @__NL80211_PMSR_FTM_CAPA_ATTR_INVALID: invalid
- *
- * @NL80211_PMSR_FTM_CAPA_ATTR_ASAP: flag attribute indicating ASAP mode
- *	is supported
- * @NL80211_PMSR_FTM_CAPA_ATTR_NON_ASAP: flag attribute indicating non-ASAP
- *	mode is supported
- * @NL80211_PMSR_FTM_CAPA_ATTR_REQ_LCI: flag attribute indicating if LCI
- *	data can be requested during the measurement
- * @NL80211_PMSR_FTM_CAPA_ATTR_REQ_CIVICLOC: flag attribute indicating if civic
- *	location data can be requested during the measurement
- * @NL80211_PMSR_FTM_CAPA_ATTR_PREAMBLES: u32 bitmap attribute of bits
- *	from &enum nl80211_preamble.
- * @NL80211_PMSR_FTM_CAPA_ATTR_BANDWIDTHS: bitmap of values from
- *	&enum nl80211_chan_width indicating the supported channel
- *	bandwidths for FTM. Note that a higher channel bandwidth may be
- *	configured to allow for other measurements types with different
- *	bandwidth requirement in the same measurement.
- * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT: u32 attribute indicating
- *	the maximum bursts exponent that can be used (if not present anything
- *	is valid)
- * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST: u32 attribute indicating
- *	the maximum FTMs per burst (if not present anything is valid)
- * @NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED: flag attribute indicating if
- *	trigger based ranging measurement is supported
- * @NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED: flag attribute indicating
- *	if non trigger based ranging measurement is supported
- *
- * @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal
- * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number
- */
-enum nl80211_peer_measurement_ftm_capa {
-	__NL80211_PMSR_FTM_CAPA_ATTR_INVALID,
-
-	NL80211_PMSR_FTM_CAPA_ATTR_ASAP,
-	NL80211_PMSR_FTM_CAPA_ATTR_NON_ASAP,
-	NL80211_PMSR_FTM_CAPA_ATTR_REQ_LCI,
-	NL80211_PMSR_FTM_CAPA_ATTR_REQ_CIVICLOC,
-	NL80211_PMSR_FTM_CAPA_ATTR_PREAMBLES,
-	NL80211_PMSR_FTM_CAPA_ATTR_BANDWIDTHS,
-	NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT,
-	NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST,
-	NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED,
-	NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED,
-
-	/* keep last */
-	NUM_NL80211_PMSR_FTM_CAPA_ATTR,
-	NL80211_PMSR_FTM_CAPA_ATTR_MAX = NUM_NL80211_PMSR_FTM_CAPA_ATTR - 1
-};
-
-/**
- * enum nl80211_peer_measurement_ftm_req - FTM request attributes
- * @__NL80211_PMSR_FTM_REQ_ATTR_INVALID: invalid
- *
- * @NL80211_PMSR_FTM_REQ_ATTR_ASAP: ASAP mode requested (flag)
- * @NL80211_PMSR_FTM_REQ_ATTR_PREAMBLE: preamble type (see
- *	&enum nl80211_preamble), optional for DMG (u32)
- * @NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP: number of bursts exponent as in
- *	802.11-2016 9.4.2.168 "Fine Timing Measurement Parameters element"
- *	(u8, 0-15, optional with default 15 i.e. "no preference")
- * @NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD: interval between bursts in units
- *	of 100ms (u16, optional with default 0)
- * @NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION: burst duration, as in 802.11-2016
- *	Table 9-257 "Burst Duration field encoding" (u8, 0-15, optional with
- *	default 15 i.e. "no preference")
- * @NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST: number of successful FTM frames
- *	requested per burst
- *	(u8, 0-31, optional with default 0 i.e. "no preference")
- * @NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES: number of FTMR frame retries
- *	(u8, default 3)
- * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI: request LCI data (flag)
- * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC: request civic location data
- *	(flag)
- * @NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED: request trigger based ranging
- *	measurement (flag).
- *	This attribute and %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED are
- *	mutually exclusive.
- *      if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor
- *	%NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based
- *	ranging will be used.
- * @NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED: request non trigger based
- *	ranging measurement (flag)
- *	This attribute and %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED are
- *	mutually exclusive.
- *      if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor
- *	%NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based
- *	ranging will be used.
- *
- * @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal
- * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number
- */
-enum nl80211_peer_measurement_ftm_req {
-	__NL80211_PMSR_FTM_REQ_ATTR_INVALID,
-
-	NL80211_PMSR_FTM_REQ_ATTR_ASAP,
-	NL80211_PMSR_FTM_REQ_ATTR_PREAMBLE,
-	NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP,
-	NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD,
-	NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION,
-	NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST,
-	NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES,
-	NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI,
-	NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC,
-	NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED,
-	NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED,
-
-	/* keep last */
-	NUM_NL80211_PMSR_FTM_REQ_ATTR,
-	NL80211_PMSR_FTM_REQ_ATTR_MAX = NUM_NL80211_PMSR_FTM_REQ_ATTR - 1
-};
-
-/**
- * enum nl80211_peer_measurement_ftm_failure_reasons - FTM failure reasons
- * @NL80211_PMSR_FTM_FAILURE_UNSPECIFIED: unspecified failure, not used
- * @NL80211_PMSR_FTM_FAILURE_NO_RESPONSE: no response from the FTM responder
- * @NL80211_PMSR_FTM_FAILURE_REJECTED: FTM responder rejected measurement
- * @NL80211_PMSR_FTM_FAILURE_WRONG_CHANNEL: we already know the peer is
- *	on a different channel, so can't measure (if we didn't know, we'd
- *	try and get no response)
- * @NL80211_PMSR_FTM_FAILURE_PEER_NOT_CAPABLE: peer can't actually do FTM
- * @NL80211_PMSR_FTM_FAILURE_INVALID_TIMESTAMP: invalid T1/T4 timestamps
- *	received
- * @NL80211_PMSR_FTM_FAILURE_PEER_BUSY: peer reports busy, you may retry
- *	later (see %NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME)
- * @NL80211_PMSR_FTM_FAILURE_BAD_CHANGED_PARAMS: parameters were changed
- *	by the peer and are no longer supported
- */
-enum nl80211_peer_measurement_ftm_failure_reasons {
-	NL80211_PMSR_FTM_FAILURE_UNSPECIFIED,
-	NL80211_PMSR_FTM_FAILURE_NO_RESPONSE,
-	NL80211_PMSR_FTM_FAILURE_REJECTED,
-	NL80211_PMSR_FTM_FAILURE_WRONG_CHANNEL,
-	NL80211_PMSR_FTM_FAILURE_PEER_NOT_CAPABLE,
-	NL80211_PMSR_FTM_FAILURE_INVALID_TIMESTAMP,
-	NL80211_PMSR_FTM_FAILURE_PEER_BUSY,
-	NL80211_PMSR_FTM_FAILURE_BAD_CHANGED_PARAMS,
-};
-
-/**
- * enum nl80211_peer_measurement_ftm_resp - FTM response attributes
- * @__NL80211_PMSR_FTM_RESP_ATTR_INVALID: invalid
- *
- * @NL80211_PMSR_FTM_RESP_ATTR_FAIL_REASON: FTM-specific failure reason
- *	(u32, optional)
- * @NL80211_PMSR_FTM_RESP_ATTR_BURST_INDEX: optional, if bursts are reported
- *	as separate results then it will be the burst index 0...(N-1) and
- *	the top level will indicate partial results (u32)
- * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_ATTEMPTS: number of FTM Request frames
- *	transmitted (u32, optional)
- * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_SUCCESSES: number of FTM Request frames
- *	that were acknowleged (u32, optional)
- * @NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME: retry time received from the
- *	busy peer (u32, seconds)
- * @NL80211_PMSR_FTM_RESP_ATTR_NUM_BURSTS_EXP: actual number of bursts exponent
- *	used by the responder (similar to request, u8)
- * @NL80211_PMSR_FTM_RESP_ATTR_BURST_DURATION: actual burst duration used by
- *	the responder (similar to request, u8)
- * @NL80211_PMSR_FTM_RESP_ATTR_FTMS_PER_BURST: actual FTMs per burst used
- *	by the responder (similar to request, u8)
- * @NL80211_PMSR_FTM_RESP_ATTR_RSSI_AVG: average RSSI across all FTM action
- *	frames (optional, s32, 1/2 dBm)
- * @NL80211_PMSR_FTM_RESP_ATTR_RSSI_SPREAD: RSSI spread across all FTM action
- *	frames (optional, s32, 1/2 dBm)
- * @NL80211_PMSR_FTM_RESP_ATTR_TX_RATE: bitrate we used for the response to the
- *	FTM action frame (optional, nested, using &enum nl80211_rate_info
- *	attributes)
- * @NL80211_PMSR_FTM_RESP_ATTR_RX_RATE: bitrate the responder used for the FTM
- *	action frame (optional, nested, using &enum nl80211_rate_info attrs)
- * @NL80211_PMSR_FTM_RESP_ATTR_RTT_AVG: average RTT (s64, picoseconds, optional
- *	but one of RTT/DIST must be present)
- * @NL80211_PMSR_FTM_RESP_ATTR_RTT_VARIANCE: RTT variance (u64, ps^2, note that
- *	standard deviation is the square root of variance, optional)
- * @NL80211_PMSR_FTM_RESP_ATTR_RTT_SPREAD: RTT spread (u64, picoseconds,
- *	optional)
- * @NL80211_PMSR_FTM_RESP_ATTR_DIST_AVG: average distance (s64, mm, optional
- *	but one of RTT/DIST must be present)
- * @NL80211_PMSR_FTM_RESP_ATTR_DIST_VARIANCE: distance variance (u64, mm^2, note
- *	that standard deviation is the square root of variance, optional)
- * @NL80211_PMSR_FTM_RESP_ATTR_DIST_SPREAD: distance spread (u64, mm, optional)
- * @NL80211_PMSR_FTM_RESP_ATTR_LCI: LCI data from peer (binary, optional);
- *	this is the contents of the Measurement Report Element (802.11-2016
- *	9.4.2.22.1) starting with the Measurement Token, with Measurement
- *	Type 8.
- * @NL80211_PMSR_FTM_RESP_ATTR_CIVICLOC: civic location data from peer
- *	(binary, optional);
- *	this is the contents of the Measurement Report Element (802.11-2016
- *	9.4.2.22.1) starting with the Measurement Token, with Measurement
- *	Type 11.
- * @NL80211_PMSR_FTM_RESP_ATTR_PAD: ignore, for u64/s64 padding only
- *
- * @NUM_NL80211_PMSR_FTM_RESP_ATTR: internal
- * @NL80211_PMSR_FTM_RESP_ATTR_MAX: highest attribute number
- */
-enum nl80211_peer_measurement_ftm_resp {
-	__NL80211_PMSR_FTM_RESP_ATTR_INVALID,
-
-	NL80211_PMSR_FTM_RESP_ATTR_FAIL_REASON,
-	NL80211_PMSR_FTM_RESP_ATTR_BURST_INDEX,
-	NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_ATTEMPTS,
-	NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_SUCCESSES,
-	NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME,
-	NL80211_PMSR_FTM_RESP_ATTR_NUM_BURSTS_EXP,
-	NL80211_PMSR_FTM_RESP_ATTR_BURST_DURATION,
-	NL80211_PMSR_FTM_RESP_ATTR_FTMS_PER_BURST,
-	NL80211_PMSR_FTM_RESP_ATTR_RSSI_AVG,
-	NL80211_PMSR_FTM_RESP_ATTR_RSSI_SPREAD,
-	NL80211_PMSR_FTM_RESP_ATTR_TX_RATE,
-	NL80211_PMSR_FTM_RESP_ATTR_RX_RATE,
-	NL80211_PMSR_FTM_RESP_ATTR_RTT_AVG,
-	NL80211_PMSR_FTM_RESP_ATTR_RTT_VARIANCE,
-	NL80211_PMSR_FTM_RESP_ATTR_RTT_SPREAD,
-	NL80211_PMSR_FTM_RESP_ATTR_DIST_AVG,
-	NL80211_PMSR_FTM_RESP_ATTR_DIST_VARIANCE,
-	NL80211_PMSR_FTM_RESP_ATTR_DIST_SPREAD,
-	NL80211_PMSR_FTM_RESP_ATTR_LCI,
-	NL80211_PMSR_FTM_RESP_ATTR_CIVICLOC,
-	NL80211_PMSR_FTM_RESP_ATTR_PAD,
-
-	/* keep last */
-	NUM_NL80211_PMSR_FTM_RESP_ATTR,
-	NL80211_PMSR_FTM_RESP_ATTR_MAX = NUM_NL80211_PMSR_FTM_RESP_ATTR - 1
-};
-
-/**
- * enum nl80211_obss_pd_attributes - OBSS packet detection attributes
- * @__NL80211_HE_OBSS_PD_ATTR_INVALID: Invalid
- *
- * @NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET: the OBSS PD minimum tx power offset.
- * @NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET: the OBSS PD maximum tx power offset.
- *
- * @__NL80211_HE_OBSS_PD_ATTR_LAST: Internal
- * @NL80211_HE_OBSS_PD_ATTR_MAX: highest OBSS PD attribute.
- */
-enum nl80211_obss_pd_attributes {
-	__NL80211_HE_OBSS_PD_ATTR_INVALID,
-
-	NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET,
-	NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET,
-
-	/* keep last */
-	__NL80211_HE_OBSS_PD_ATTR_LAST,
-	NL80211_HE_OBSS_PD_ATTR_MAX = __NL80211_HE_OBSS_PD_ATTR_LAST - 1,
-};
-
-/**
- * enum nl80211_bss_color_attributes - BSS Color attributes
- * @__NL80211_HE_BSS_COLOR_ATTR_INVALID: Invalid
- *
- * @NL80211_HE_BSS_COLOR_ATTR_COLOR: the current BSS Color.
- * @NL80211_HE_BSS_COLOR_ATTR_DISABLED: is BSS coloring disabled.
- * @NL80211_HE_BSS_COLOR_ATTR_PARTIAL: the AID equation to be used..
- *
- * @__NL80211_HE_BSS_COLOR_ATTR_LAST: Internal
- * @NL80211_HE_BSS_COLOR_ATTR_MAX: highest BSS Color attribute.
- */
-enum nl80211_bss_color_attributes {
-	__NL80211_HE_BSS_COLOR_ATTR_INVALID,
-
-	NL80211_HE_BSS_COLOR_ATTR_COLOR,
-	NL80211_HE_BSS_COLOR_ATTR_DISABLED,
-	NL80211_HE_BSS_COLOR_ATTR_PARTIAL,
-
-	/* keep last */
-	__NL80211_HE_BSS_COLOR_ATTR_LAST,
-	NL80211_HE_BSS_COLOR_ATTR_MAX = __NL80211_HE_BSS_COLOR_ATTR_LAST - 1,
-};
-
-/**
- * enum nl80211_iftype_akm_attributes - interface type AKM attributes
- * @__NL80211_IFTYPE_AKM_ATTR_INVALID: Invalid
- *
- * @NL80211_IFTYPE_AKM_ATTR_IFTYPES: nested attribute containing a flag
- *	attribute for each interface type that supports AKM suites specified in
- *	%NL80211_IFTYPE_AKM_ATTR_SUITES
- * @NL80211_IFTYPE_AKM_ATTR_SUITES: an array of u32. Used to indicate supported
- *	AKM suites for the specified interface types.
- *
- * @__NL80211_IFTYPE_AKM_ATTR_LAST: Internal
- * @NL80211_IFTYPE_AKM_ATTR_MAX: highest interface type AKM attribute.
- */
-enum nl80211_iftype_akm_attributes {
-	__NL80211_IFTYPE_AKM_ATTR_INVALID,
-
-	NL80211_IFTYPE_AKM_ATTR_IFTYPES,
-	NL80211_IFTYPE_AKM_ATTR_SUITES,
-
-	/* keep last */
-	__NL80211_IFTYPE_AKM_ATTR_LAST,
-	NL80211_IFTYPE_AKM_ATTR_MAX = __NL80211_IFTYPE_AKM_ATTR_LAST - 1,
-};
-
-#endif /* __LINUX_NL80211_H */
+#ifndef __LINUX_NL80211_H 
+#define __LINUX_NL80211_H 
+/* 
+ * 802.11 netlink interface public header 
+ * 
+ * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net> 
+ * Copyright 2008 Michael Wu <flamingice@sourmilk.net> 
+ * Copyright 2008 Luis Carlos Cobo <luisca@cozybit.com> 
+ * Copyright 2008 Michael Buesch <m@bues.ch> 
+ * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com> 
+ * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com> 
+ * Copyright 2008 Colin McCabe <colin@cozybit.com> 
+ * Copyright 2015-2017	Intel Deutschland GmbH 
+ * Copyright (C) 2018-2020 Intel Corporation 
+ * 
+ * Permission to use, copy, modify, and/or distribute this software for any 
+ * purpose with or without fee is hereby granted, provided that the above 
+ * copyright notice and this permission notice appear in all copies. 
+ * 
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 
+ * 
+ */ 
+ 
+/* 
+ * This header file defines the userspace API to the wireless stack. Please 
+ * be careful not to break things - i.e. don't move anything around or so 
+ * unless you can demonstrate that it breaks neither API nor ABI. 
+ * 
+ * Additions to the API should be accompanied by actual implementations in 
+ * an upstream driver, so that example implementations exist in case there 
+ * are ever concerns about the precise semantics of the API or changes are 
+ * needed, and to ensure that code for dead (no longer implemented) API 
+ * can actually be identified and removed. 
+ * Nonetheless, semantics should also be documented carefully in this file. 
+ */ 
+ 
+#include <linux/types.h> 
+ 
+#define NL80211_GENL_NAME "nl80211" 
+ 
+#define NL80211_MULTICAST_GROUP_CONFIG		"config" 
+#define NL80211_MULTICAST_GROUP_SCAN		"scan" 
+#define NL80211_MULTICAST_GROUP_REG		"regulatory" 
+#define NL80211_MULTICAST_GROUP_MLME		"mlme" 
+#define NL80211_MULTICAST_GROUP_VENDOR		"vendor" 
+#define NL80211_MULTICAST_GROUP_NAN		"nan" 
+#define NL80211_MULTICAST_GROUP_TESTMODE	"testmode" 
+ 
+#define NL80211_EDMG_BW_CONFIG_MIN	4 
+#define NL80211_EDMG_BW_CONFIG_MAX	15 
+#define NL80211_EDMG_CHANNELS_MIN	1 
+#define NL80211_EDMG_CHANNELS_MAX	0x3c /* 0b00111100 */ 
+ 
+/** 
+ * DOC: Station handling 
+ * 
+ * Stations are added per interface, but a special case exists with VLAN 
+ * interfaces. When a station is bound to an AP interface, it may be moved 
+ * into a VLAN identified by a VLAN interface index (%NL80211_ATTR_STA_VLAN). 
+ * The station is still assumed to belong to the AP interface it was added 
+ * to. 
+ * 
+ * Station handling varies per interface type and depending on the driver's 
+ * capabilities. 
+ * 
+ * For drivers supporting TDLS with external setup (WIPHY_FLAG_SUPPORTS_TDLS 
+ * and WIPHY_FLAG_TDLS_EXTERNAL_SETUP), the station lifetime is as follows: 
+ *  - a setup station entry is added, not yet authorized, without any rate 
+ *    or capability information, this just exists to avoid race conditions 
+ *  - when the TDLS setup is done, a single NL80211_CMD_SET_STATION is valid 
+ *    to add rate and capability information to the station and at the same 
+ *    time mark it authorized. 
+ *  - %NL80211_TDLS_ENABLE_LINK is then used 
+ *  - after this, the only valid operation is to remove it by tearing down 
+ *    the TDLS link (%NL80211_TDLS_DISABLE_LINK) 
+ * 
+ * TODO: need more info for other interface types 
+ */ 
+ 
+/** 
+ * DOC: Frame transmission/registration support 
+ * 
+ * Frame transmission and registration support exists to allow userspace 
+ * management entities such as wpa_supplicant react to management frames 
+ * that are not being handled by the kernel. This includes, for example, 
+ * certain classes of action frames that cannot be handled in the kernel 
+ * for various reasons. 
+ * 
+ * Frame registration is done on a per-interface basis and registrations 
+ * cannot be removed other than by closing the socket. It is possible to 
+ * specify a registration filter to register, for example, only for a 
+ * certain type of action frame. In particular with action frames, those 
+ * that userspace registers for will not be returned as unhandled by the 
+ * driver, so that the registered application has to take responsibility 
+ * for doing that. 
+ * 
+ * The type of frame that can be registered for is also dependent on the 
+ * driver and interface type. The frame types are advertised in wiphy 
+ * attributes so applications know what to expect. 
+ * 
+ * NOTE: When an interface changes type while registrations are active, 
+ *       these registrations are ignored until the interface type is 
+ *       changed again. This means that changing the interface type can 
+ *       lead to a situation that couldn't otherwise be produced, but 
+ *       any such registrations will be dormant in the sense that they 
+ *       will not be serviced, i.e. they will not receive any frames. 
+ * 
+ * Frame transmission allows userspace to send for example the required 
+ * responses to action frames. It is subject to some sanity checking, 
+ * but many frames can be transmitted. When a frame was transmitted, its 
+ * status is indicated to the sending socket. 
+ * 
+ * For more technical details, see the corresponding command descriptions 
+ * below. 
+ */ 
+ 
+/** 
+ * DOC: Virtual interface / concurrency capabilities 
+ * 
+ * Some devices are able to operate with virtual MACs, they can have 
+ * more than one virtual interface. The capability handling for this 
+ * is a bit complex though, as there may be a number of restrictions 
+ * on the types of concurrency that are supported. 
+ * 
+ * To start with, each device supports the interface types listed in 
+ * the %NL80211_ATTR_SUPPORTED_IFTYPES attribute, but by listing the 
+ * types there no concurrency is implied. 
+ * 
+ * Once concurrency is desired, more attributes must be observed: 
+ * To start with, since some interface types are purely managed in 
+ * software, like the AP-VLAN type in mac80211 for example, there's 
+ * an additional list of these, they can be added at any time and 
+ * are only restricted by some semantic restrictions (e.g. AP-VLAN 
+ * cannot be added without a corresponding AP interface). This list 
+ * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute. 
+ * 
+ * Further, the list of supported combinations is exported. This is 
+ * in the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute. Basically, 
+ * it exports a list of "groups", and at any point in time the 
+ * interfaces that are currently active must fall into any one of 
+ * the advertised groups. Within each group, there are restrictions 
+ * on the number of interfaces of different types that are supported 
+ * and also the number of different channels, along with potentially 
+ * some other restrictions. See &enum nl80211_if_combination_attrs. 
+ * 
+ * All together, these attributes define the concurrency of virtual 
+ * interfaces that a given device supports. 
+ */ 
+ 
+/** 
+ * DOC: packet coalesce support 
+ * 
+ * In most cases, host that receives IPv4 and IPv6 multicast/broadcast 
+ * packets does not do anything with these packets. Therefore the 
+ * reception of these unwanted packets causes unnecessary processing 
+ * and power consumption. 
+ * 
+ * Packet coalesce feature helps to reduce number of received interrupts 
+ * to host by buffering these packets in firmware/hardware for some 
+ * predefined time. Received interrupt will be generated when one of the 
+ * following events occur. 
+ * a) Expiration of hardware timer whose expiration time is set to maximum 
+ * coalescing delay of matching coalesce rule. 
+ * b) Coalescing buffer in hardware reaches it's limit. 
+ * c) Packet doesn't match any of the configured coalesce rules. 
+ * 
+ * User needs to configure following parameters for creating a coalesce 
+ * rule. 
+ * a) Maximum coalescing delay 
+ * b) List of packet patterns which needs to be matched 
+ * c) Condition for coalescence. pattern 'match' or 'no match' 
+ * Multiple such rules can be created. 
+ */ 
+ 
+/** 
+ * DOC: WPA/WPA2 EAPOL handshake offload 
+ * 
+ * By setting @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK flag drivers 
+ * can indicate they support offloading EAPOL handshakes for WPA/WPA2 
+ * preshared key authentication. In %NL80211_CMD_CONNECT the preshared 
+ * key should be specified using %NL80211_ATTR_PMK. Drivers supporting 
+ * this offload may reject the %NL80211_CMD_CONNECT when no preshared 
+ * key material is provided, for example when that driver does not 
+ * support setting the temporal keys through %CMD_NEW_KEY. 
+ * 
+ * Similarly @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X flag can be 
+ * set by drivers indicating offload support of the PTK/GTK EAPOL 
+ * handshakes during 802.1X authentication. In order to use the offload 
+ * the %NL80211_CMD_CONNECT should have %NL80211_ATTR_WANT_1X_4WAY_HS 
+ * attribute flag. Drivers supporting this offload may reject the 
+ * %NL80211_CMD_CONNECT when the attribute flag is not present. 
+ * 
+ * For 802.1X the PMK or PMK-R0 are set by providing %NL80211_ATTR_PMK 
+ * using %NL80211_CMD_SET_PMK. For offloaded FT support also 
+ * %NL80211_ATTR_PMKR0_NAME must be provided. 
+ */ 
+ 
+/** 
+ * DOC: FILS shared key authentication offload 
+ * 
+ * FILS shared key authentication offload can be advertized by drivers by 
+ * setting @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD flag. The drivers that support 
+ * FILS shared key authentication offload should be able to construct the 
+ * authentication and association frames for FILS shared key authentication and 
+ * eventually do a key derivation as per IEEE 802.11ai. The below additional 
+ * parameters should be given to driver in %NL80211_CMD_CONNECT and/or in 
+ * %NL80211_CMD_UPDATE_CONNECT_PARAMS. 
+ *	%NL80211_ATTR_FILS_ERP_USERNAME - used to construct keyname_nai 
+ *	%NL80211_ATTR_FILS_ERP_REALM - used to construct keyname_nai 
+ *	%NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used to construct erp message 
+ *	%NL80211_ATTR_FILS_ERP_RRK - used to generate the rIK and rMSK 
+ * rIK should be used to generate an authentication tag on the ERP message and 
+ * rMSK should be used to derive a PMKSA. 
+ * rIK, rMSK should be generated and keyname_nai, sequence number should be used 
+ * as specified in IETF RFC 6696. 
+ * 
+ * When FILS shared key authentication is completed, driver needs to provide the 
+ * below additional parameters to userspace, which can be either after setting 
+ * up a connection or after roaming. 
+ *	%NL80211_ATTR_FILS_KEK - used for key renewal 
+ *	%NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used in further EAP-RP exchanges 
+ *	%NL80211_ATTR_PMKID - used to identify the PMKSA used/generated 
+ *	%Nl80211_ATTR_PMK - used to update PMKSA cache in userspace 
+ * The PMKSA can be maintained in userspace persistently so that it can be used 
+ * later after reboots or wifi turn off/on also. 
+ * 
+ * %NL80211_ATTR_FILS_CACHE_ID is the cache identifier advertized by a FILS 
+ * capable AP supporting PMK caching. It specifies the scope within which the 
+ * PMKSAs are cached in an ESS. %NL80211_CMD_SET_PMKSA and 
+ * %NL80211_CMD_DEL_PMKSA are enhanced to allow support for PMKSA caching based 
+ * on FILS cache identifier. Additionally %NL80211_ATTR_PMK is used with 
+ * %NL80211_SET_PMKSA to specify the PMK corresponding to a PMKSA for driver to 
+ * use in a FILS shared key connection with PMKSA caching. 
+ */ 
+ 
+/** 
+ * DOC: SAE authentication offload 
+ * 
+ * By setting @NL80211_EXT_FEATURE_SAE_OFFLOAD flag drivers can indicate they 
+ * support offloading SAE authentication for WPA3-Personal networks. In 
+ * %NL80211_CMD_CONNECT the password for SAE should be specified using 
+ * %NL80211_ATTR_SAE_PASSWORD. 
+ */ 
+ 
+/** 
+ * DOC: VLAN offload support for setting group keys and binding STAs to VLANs 
+ * 
+ * By setting @NL80211_EXT_FEATURE_VLAN_OFFLOAD flag drivers can indicate they 
+ * support offloading VLAN functionality in a manner where the driver exposes a 
+ * single netdev that uses VLAN tagged frames and separate VLAN-specific netdevs 
+ * can then be added using RTM_NEWLINK/IFLA_VLAN_ID similarly to the Ethernet 
+ * case. Frames received from stations that are not assigned to any VLAN are 
+ * delivered on the main netdev and frames to such stations can be sent through 
+ * that main netdev. 
+ * 
+ * %NL80211_CMD_NEW_KEY (for group keys), %NL80211_CMD_NEW_STATION, and 
+ * %NL80211_CMD_SET_STATION will optionally specify vlan_id using 
+ * %NL80211_ATTR_VLAN_ID. 
+ */ 
+ 
+/** 
+ * DOC: TID configuration 
+ * 
+ * TID config support can be checked in the %NL80211_ATTR_TID_CONFIG 
+ * attribute given in wiphy capabilities. 
+ * 
+ * The necessary configuration parameters are mentioned in 
+ * &enum nl80211_tid_config_attr and it will be passed to the 
+ * %NL80211_CMD_SET_TID_CONFIG command in %NL80211_ATTR_TID_CONFIG. 
+ * 
+ * If the configuration needs to be applied for specific peer then the MAC 
+ * address of the peer needs to be passed in %NL80211_ATTR_MAC, otherwise the 
+ * configuration will be applied for all the connected peers in the vif except 
+ * any peers that have peer specific configuration for the TID by default; if 
+ * the %NL80211_TID_CONFIG_ATTR_OVERRIDE flag is set, peer specific values 
+ * will be overwritten. 
+ * 
+ * All this configuration is valid only for STA's current connection 
+ * i.e. the configuration will be reset to default when the STA connects back 
+ * after disconnection/roaming, and this configuration will be cleared when 
+ * the interface goes down. 
+ */ 
+ 
+/** 
+ * enum nl80211_commands - supported nl80211 commands 
+ * 
+ * @NL80211_CMD_UNSPEC: unspecified command to catch errors 
+ * 
+ * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request 
+ *	to get a list of all present wiphys. 
+ * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or 
+ *	%NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME, 
+ *	%NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ (and the 
+ *	attributes determining the channel width; this is used for setting 
+ *	monitor mode channel),  %NL80211_ATTR_WIPHY_RETRY_SHORT, 
+ *	%NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, 
+ *	and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD. 
+ *	However, for setting the channel, see %NL80211_CMD_SET_CHANNEL 
+ *	instead, the support here is for backward compatibility only. 
+ * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request 
+ *	or rename notification. Has attributes %NL80211_ATTR_WIPHY and 
+ *	%NL80211_ATTR_WIPHY_NAME. 
+ * @NL80211_CMD_DEL_WIPHY: Wiphy deleted. Has attributes 
+ *	%NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME. 
+ * 
+ * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration; 
+ *	either a dump request for all interfaces or a specific get with a 
+ *	single %NL80211_ATTR_IFINDEX is supported. 
+ * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires 
+ *	%NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE. 
+ * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response 
+ *	to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX, 
+ *	%NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also 
+ *	be sent from userspace to request creation of a new virtual interface, 
+ *	then requires attributes %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFTYPE and 
+ *	%NL80211_ATTR_IFNAME. 
+ * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes 
+ *	%NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from 
+ *	userspace to request deletion of a virtual interface, then requires 
+ *	attribute %NL80211_ATTR_IFINDEX. 
+ * 
+ * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified 
+ *	by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC. 
+ * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT, 
+ *	%NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD. 
+ * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA, 
+ *	%NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER, 
+ *	and %NL80211_ATTR_KEY_SEQ attributes. 
+ * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX 
+ *	or %NL80211_ATTR_MAC. 
+ * 
+ * @NL80211_CMD_GET_BEACON: (not used) 
+ * @NL80211_CMD_SET_BEACON: change the beacon on an access point interface 
+ *	using the %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL 
+ *	attributes. For drivers that generate the beacon and probe responses 
+ *	internally, the following attributes must be provided: %NL80211_ATTR_IE, 
+ *	%NL80211_ATTR_IE_PROBE_RESP and %NL80211_ATTR_IE_ASSOC_RESP. 
+ * @NL80211_CMD_START_AP: Start AP operation on an AP interface, parameters 
+ *	are like for %NL80211_CMD_SET_BEACON, and additionally parameters that 
+ *	do not change are used, these include %NL80211_ATTR_BEACON_INTERVAL, 
+ *	%NL80211_ATTR_DTIM_PERIOD, %NL80211_ATTR_SSID, 
+ *	%NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE, 
+ *	%NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS, 
+ *	%NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY, 
+ *	%NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT, 
+ *	%NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS. 
+ *	The channel to use can be set on the interface or be given using the 
+ *	%NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width. 
+ * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP 
+ * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface 
+ * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP 
+ * 
+ * @NL80211_CMD_GET_STATION: Get station attributes for station identified by 
+ *	%NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. 
+ * @NL80211_CMD_SET_STATION: Set station attributes for station identified by 
+ *	%NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. 
+ * @NL80211_CMD_NEW_STATION: Add a station with given attributes to the 
+ *	the interface identified by %NL80211_ATTR_IFINDEX. 
+ * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC 
+ *	or, if no MAC address given, all stations, on the interface identified 
+ *	by %NL80211_ATTR_IFINDEX. %NL80211_ATTR_MGMT_SUBTYPE and 
+ *	%NL80211_ATTR_REASON_CODE can optionally be used to specify which type 
+ *	of disconnection indication should be sent to the station 
+ *	(Deauthentication or Disassociation frame and reason code for that 
+ *	frame). 
+ * 
+ * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to 
+ * 	destination %NL80211_ATTR_MAC on the interface identified by 
+ * 	%NL80211_ATTR_IFINDEX. 
+ * @NL80211_CMD_SET_MPATH:  Set mesh path attributes for mesh path to 
+ * 	destination %NL80211_ATTR_MAC on the interface identified by 
+ * 	%NL80211_ATTR_IFINDEX. 
+ * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by 
+ *	%NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP. 
+ * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by 
+ *	%NL80211_ATTR_MAC. 
+ * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the 
+ *	the interface identified by %NL80211_ATTR_IFINDEX. 
+ * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC 
+ *	or, if no MAC address given, all mesh paths, on the interface identified 
+ *	by %NL80211_ATTR_IFINDEX. 
+ * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by 
+ *	%NL80211_ATTR_IFINDEX. 
+ * 
+ * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set 
+ *	regulatory domain. If %NL80211_ATTR_WIPHY is specified and the device 
+ *	has a private regulatory domain, it will be returned. Otherwise, the 
+ *	global regdomain will be returned. 
+ *	A device will have a private regulatory domain if it uses the 
+ *	regulatory_hint() API. Even when a private regdomain is used the channel 
+ *	information will still be mended according to further hints from 
+ *	the regulatory core to help with compliance. A dump version of this API 
+ *	is now available which will returns the global regdomain as well as 
+ *	all private regdomains of present wiphys (for those that have it). 
+ *	If a wiphy is self-managed (%NL80211_ATTR_WIPHY_SELF_MANAGED_REG), then 
+ *	its private regdomain is the only valid one for it. The regulatory 
+ *	core is not used to help with compliance in this case. 
+ * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command 
+ *	after being queried by the kernel. CRDA replies by sending a regulatory 
+ *	domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our 
+ *	current alpha2 if it found a match. It also provides 
+ * 	NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each 
+ * 	regulatory rule is a nested set of attributes  given by 
+ * 	%NL80211_ATTR_REG_RULE_FREQ_[START|END] and 
+ * 	%NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by 
+ * 	%NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and 
+ * 	%NL80211_ATTR_REG_RULE_POWER_MAX_EIRP. 
+ * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain 
+ * 	to the specified ISO/IEC 3166-1 alpha2 country code. The core will 
+ * 	store this as a valid request and then query userspace for it. 
+ * 
+ * @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the 
+ *	interface identified by %NL80211_ATTR_IFINDEX 
+ * 
+ * @NL80211_CMD_SET_MESH_CONFIG: Set mesh networking properties for the 
+ *      interface identified by %NL80211_ATTR_IFINDEX 
+ * 
+ * @NL80211_CMD_SET_MGMT_EXTRA_IE: Set extra IEs for management frames. The 
+ *	interface is identified with %NL80211_ATTR_IFINDEX and the management 
+ *	frame subtype with %NL80211_ATTR_MGMT_SUBTYPE. The extra IE data to be 
+ *	added to the end of the specified management frame is specified with 
+ *	%NL80211_ATTR_IE. If the command succeeds, the requested data will be 
+ *	added to all specified management frames generated by 
+ *	kernel/firmware/driver. 
+ *	Note: This command has been removed and it is only reserved at this 
+ *	point to avoid re-using existing command number. The functionality this 
+ *	command was planned for has been provided with cleaner design with the 
+ *	option to specify additional IEs in NL80211_CMD_TRIGGER_SCAN, 
+ *	NL80211_CMD_AUTHENTICATE, NL80211_CMD_ASSOCIATE, 
+ *	NL80211_CMD_DEAUTHENTICATE, and NL80211_CMD_DISASSOCIATE. 
+ * 
+ * @NL80211_CMD_GET_SCAN: get scan results 
+ * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters 
+ *	%NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the 
+ *	probe requests at CCK rate or not. %NL80211_ATTR_BSSID can be used to 
+ *	specify a BSSID to scan for; if not included, the wildcard BSSID will 
+ *	be used. 
+ * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to 
+ *	NL80211_CMD_GET_SCAN and on the "scan" multicast group) 
+ * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons, 
+ *	partial scan results may be available 
+ * 
+ * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain 
+ *	intervals and certain number of cycles, as specified by 
+ *	%NL80211_ATTR_SCHED_SCAN_PLANS. If %NL80211_ATTR_SCHED_SCAN_PLANS is 
+ *	not specified and only %NL80211_ATTR_SCHED_SCAN_INTERVAL is specified, 
+ *	scheduled scan will run in an infinite loop with the specified interval. 
+ *	These attributes are mutually exculsive, 
+ *	i.e. NL80211_ATTR_SCHED_SCAN_INTERVAL must not be passed if 
+ *	NL80211_ATTR_SCHED_SCAN_PLANS is defined. 
+ *	If for some reason scheduled scan is aborted by the driver, all scan 
+ *	plans are canceled (including scan plans that did not start yet). 
+ *	Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS) 
+ *	are passed, they are used in the probe requests.  For 
+ *	broadcast, a broadcast SSID must be passed (ie. an empty 
+ *	string).  If no SSID is passed, no probe requests are sent and 
+ *	a passive scan is performed.  %NL80211_ATTR_SCAN_FREQUENCIES, 
+ *	if passed, define which channels should be scanned; if not 
+ *	passed, all channels allowed for the current regulatory domain 
+ *	are used.  Extra IEs can also be passed from the userspace by 
+ *	using the %NL80211_ATTR_IE attribute.  The first cycle of the 
+ *	scheduled scan can be delayed by %NL80211_ATTR_SCHED_SCAN_DELAY 
+ *	is supplied. If the device supports multiple concurrent scheduled 
+ *	scans, it will allow such when the caller provides the flag attribute 
+ *	%NL80211_ATTR_SCHED_SCAN_MULTI to indicate user-space support for it. 
+ * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if 
+ *	scheduled scan is not running. The caller may assume that as soon 
+ *	as the call returns, it is safe to start a new scheduled scan again. 
+ * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan 
+ *	results available. 
+ * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has 
+ *	stopped.  The driver may issue this event at any time during a 
+ *	scheduled scan.  One reason for stopping the scan is if the hardware 
+ *	does not support starting an association or a normal scan while running 
+ *	a scheduled scan.  This event is also sent when the 
+ *	%NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface 
+ *	is brought down while a scheduled scan was running. 
+ * 
+ * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation 
+ *      or noise level 
+ * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to 
+ *	NL80211_CMD_GET_SURVEY and on the "scan" multicast group) 
+ * 
+ * @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry using %NL80211_ATTR_MAC 
+ *	(for the BSSID), %NL80211_ATTR_PMKID, and optionally %NL80211_ATTR_PMK 
+ *	(PMK is used for PTKSA derivation in case of FILS shared key offload) or 
+ *	using %NL80211_ATTR_SSID, %NL80211_ATTR_FILS_CACHE_ID, 
+ *	%NL80211_ATTR_PMKID, and %NL80211_ATTR_PMK in case of FILS 
+ *	authentication where %NL80211_ATTR_FILS_CACHE_ID is the identifier 
+ *	advertized by a FILS capable AP identifying the scope of PMKSA in an 
+ *	ESS. 
+ * @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC 
+ *	(for the BSSID) and %NL80211_ATTR_PMKID or using %NL80211_ATTR_SSID, 
+ *	%NL80211_ATTR_FILS_CACHE_ID, and %NL80211_ATTR_PMKID in case of FILS 
+ *	authentication. 
+ * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries. 
+ * 
+ * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain 
+ * 	has been changed and provides details of the request information 
+ * 	that caused the change such as who initiated the regulatory request 
+ * 	(%NL80211_ATTR_REG_INITIATOR), the wiphy_idx 
+ * 	(%NL80211_ATTR_REG_ALPHA2) on which the request was made from if 
+ * 	the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or 
+ * 	%NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain 
+ * 	set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is 
+ * 	%NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on 
+ * 	to (%NL80211_ATTR_REG_ALPHA2). 
+ * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon 
+ * 	has been found while world roaming thus enabling active scan or 
+ * 	any mode of operation that initiates TX (beacons) on a channel 
+ * 	where we would not have been able to do either before. As an example 
+ * 	if you are world roaming (regulatory domain set to world or if your 
+ * 	driver is using a custom world roaming regulatory domain) and while 
+ * 	doing a passive scan on the 5 GHz band you find an AP there (if not 
+ * 	on a DFS channel) you will now be able to actively scan for that AP 
+ * 	or use AP mode on your card on that same channel. Note that this will 
+ * 	never be used for channels 1-11 on the 2 GHz band as they are always 
+ * 	enabled world wide. This beacon hint is only sent if your device had 
+ * 	either disabled active scanning or beaconing on a channel. We send to 
+ * 	userspace the wiphy on which we removed a restriction from 
+ * 	(%NL80211_ATTR_WIPHY) and the channel on which this occurred 
+ * 	before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER) 
+ * 	the beacon hint was processed. 
+ * 
+ * @NL80211_CMD_AUTHENTICATE: authentication request and notification. 
+ *	This command is used both as a command (request to authenticate) and 
+ *	as an event on the "mlme" multicast group indicating completion of the 
+ *	authentication process. 
+ *	When used as a command, %NL80211_ATTR_IFINDEX is used to identify the 
+ *	interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and 
+ *	BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify 
+ *	the SSID (mainly for association, but is included in authentication 
+ *	request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used 
+ *	to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE 
+ *	is used to specify the authentication type. %NL80211_ATTR_IE is used to 
+ *	define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs) 
+ *	to be added to the frame. 
+ *	When used as an event, this reports reception of an Authentication 
+ *	frame in station and IBSS modes when the local MLME processed the 
+ *	frame, i.e., it was for the local STA and was received in correct 
+ *	state. This is similar to MLME-AUTHENTICATE.confirm primitive in the 
+ *	MLME SAP interface (kernel providing MLME, userspace SME). The 
+ *	included %NL80211_ATTR_FRAME attribute contains the management frame 
+ *	(including both the header and frame body, but not FCS). This event is 
+ *	also used to indicate if the authentication attempt timed out. In that 
+ *	case the %NL80211_ATTR_FRAME attribute is replaced with a 
+ *	%NL80211_ATTR_TIMED_OUT flag (and %NL80211_ATTR_MAC to indicate which 
+ *	pending authentication timed out). 
+ * @NL80211_CMD_ASSOCIATE: association request and notification; like 
+ *	NL80211_CMD_AUTHENTICATE but for Association and Reassociation 
+ *	(similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request, 
+ *	MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives). The 
+ *	%NL80211_ATTR_PREV_BSSID attribute is used to specify whether the 
+ *	request is for the initial association to an ESS (that attribute not 
+ *	included) or for reassociation within the ESS (that attribute is 
+ *	included). 
+ * @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like 
+ *	NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to 
+ *	MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication 
+ *	primitives). 
+ * @NL80211_CMD_DISASSOCIATE: disassociation request and notification; like 
+ *	NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to 
+ *	MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives). 
+ * 
+ * @NL80211_CMD_MICHAEL_MIC_FAILURE: notification of a locally detected Michael 
+ *	MIC (part of TKIP) failure; sent on the "mlme" multicast group; the 
+ *	event includes %NL80211_ATTR_MAC to describe the source MAC address of 
+ *	the frame with invalid MIC, %NL80211_ATTR_KEY_TYPE to show the key 
+ *	type, %NL80211_ATTR_KEY_IDX to indicate the key identifier, and 
+ *	%NL80211_ATTR_KEY_SEQ to indicate the TSC value of the frame; this 
+ *	event matches with MLME-MICHAELMICFAILURE.indication() primitive 
+ * 
+ * @NL80211_CMD_JOIN_IBSS: Join a new IBSS -- given at least an SSID and a 
+ *	FREQ attribute (for the initial frequency if no peer can be found) 
+ *	and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those 
+ *	should be fixed rather than automatically determined. Can only be 
+ *	executed on a network interface that is UP, and fixed BSSID/FREQ 
+ *	may be rejected. Another optional parameter is the beacon interval, 
+ *	given in the %NL80211_ATTR_BEACON_INTERVAL attribute, which if not 
+ *	given defaults to 100 TU (102.4ms). 
+ * @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is 
+ *	determined by the network interface. 
+ * 
+ * @NL80211_CMD_TESTMODE: testmode command, takes a wiphy (or ifindex) attribute 
+ *	to identify the device, and the TESTDATA blob attribute to pass through 
+ *	to the driver. 
+ * 
+ * @NL80211_CMD_CONNECT: connection request and notification; this command 
+ *	requests to connect to a specified network but without separating 
+ *	auth and assoc steps. For this, you need to specify the SSID in a 
+ *	%NL80211_ATTR_SSID attribute, and can optionally specify the association 
+ *	IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP, 
+ *	%NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, 
+ *	%NL80211_ATTR_CONTROL_PORT_ETHERTYPE, 
+ *	%NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, 
+ *	%NL80211_ATTR_CONTROL_PORT_OVER_NL80211, %NL80211_ATTR_MAC_HINT, and 
+ *	%NL80211_ATTR_WIPHY_FREQ_HINT. 
+ *	If included, %NL80211_ATTR_MAC and %NL80211_ATTR_WIPHY_FREQ are 
+ *	restrictions on BSS selection, i.e., they effectively prevent roaming 
+ *	within the ESS. %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT 
+ *	can be included to provide a recommendation of the initial BSS while 
+ *	allowing the driver to roam to other BSSes within the ESS and also to 
+ *	ignore this recommendation if the indicated BSS is not ideal. Only one 
+ *	set of BSSID,frequency parameters is used (i.e., either the enforcing 
+ *	%NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict 
+ *	%NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT). 
+ *	Driver shall not modify the IEs specified through %NL80211_ATTR_IE if 
+ *	%NL80211_ATTR_MAC is included. However, if %NL80211_ATTR_MAC_HINT is 
+ *	included, these IEs through %NL80211_ATTR_IE are specified by the user 
+ *	space based on the best possible BSS selected. Thus, if the driver ends 
+ *	up selecting a different BSS, it can modify these IEs accordingly (e.g. 
+ *	userspace asks the driver to perform PMKSA caching with BSS1 and the 
+ *	driver ends up selecting BSS2 with different PMKSA cache entry; RSNIE 
+ *	has to get updated with the apt PMKID). 
+ *	%NL80211_ATTR_PREV_BSSID can be used to request a reassociation within 
+ *	the ESS in case the device is already associated and an association with 
+ *	a different BSS is desired. 
+ *	Background scan period can optionally be 
+ *	specified in %NL80211_ATTR_BG_SCAN_PERIOD, 
+ *	if not specified default background scan configuration 
+ *	in driver is used and if period value is 0, bg scan will be disabled. 
+ *	This attribute is ignored if driver does not support roam scan. 
+ *	It is also sent as an event, with the BSSID and response IEs when the 
+ *	connection is established or failed to be established. This can be 
+ *	determined by the %NL80211_ATTR_STATUS_CODE attribute (0 = success, 
+ *	non-zero = failure). If %NL80211_ATTR_TIMED_OUT is included in the 
+ *	event, the connection attempt failed due to not being able to initiate 
+ *	authentication/association or not receiving a response from the AP. 
+ *	Non-zero %NL80211_ATTR_STATUS_CODE value is indicated in that case as 
+ *	well to remain backwards compatible. 
+ *	When establishing a security association, drivers that support 4 way 
+ *	handshake offload should send %NL80211_CMD_PORT_AUTHORIZED event when 
+ *	the 4 way handshake is completed successfully. 
+ * @NL80211_CMD_ROAM: Notification indicating the card/driver roamed by itself. 
+ *	When a security association was established with the new AP (e.g. if 
+ *	the FT protocol was used for roaming or the driver completed the 4 way 
+ *	handshake), this event should be followed by an 
+ *	%NL80211_CMD_PORT_AUTHORIZED event. 
+ * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify 
+ *	userspace that a connection was dropped by the AP or due to other 
+ *	reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and 
+ *	%NL80211_ATTR_REASON_CODE attributes are used. 
+ * 
+ * @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices 
+ *	associated with this wiphy must be down and will follow. 
+ * 
+ * @NL80211_CMD_REMAIN_ON_CHANNEL: Request to remain awake on the specified 
+ *	channel for the specified amount of time. This can be used to do 
+ *	off-channel operations like transmit a Public Action frame and wait for 
+ *	a response while being associated to an AP on another channel. 
+ *	%NL80211_ATTR_IFINDEX is used to specify which interface (and thus 
+ *	radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the 
+ *	frequency for the operation. 
+ *	%NL80211_ATTR_DURATION is used to specify the duration in milliseconds 
+ *	to remain on the channel. This command is also used as an event to 
+ *	notify when the requested duration starts (it may take a while for the 
+ *	driver to schedule this time due to other concurrent needs for the 
+ *	radio). 
+ *	When called, this operation returns a cookie (%NL80211_ATTR_COOKIE) 
+ *	that will be included with any events pertaining to this request; 
+ *	the cookie is also used to cancel the request. 
+ * @NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL: This command can be used to cancel a 
+ *	pending remain-on-channel duration if the desired operation has been 
+ *	completed prior to expiration of the originally requested duration. 
+ *	%NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify the 
+ *	radio. The %NL80211_ATTR_COOKIE attribute must be given as well to 
+ *	uniquely identify the request. 
+ *	This command is also used as an event to notify when a requested 
+ *	remain-on-channel duration has expired. 
+ * 
+ * @NL80211_CMD_SET_TX_BITRATE_MASK: Set the mask of rates to be used in TX 
+ *	rate selection. %NL80211_ATTR_IFINDEX is used to specify the interface 
+ *	and @NL80211_ATTR_TX_RATES the set of allowed rates. 
+ * 
+ * @NL80211_CMD_REGISTER_FRAME: Register for receiving certain mgmt frames 
+ *	(via @NL80211_CMD_FRAME) for processing in userspace. This command 
+ *	requires an interface index, a frame type attribute (optional for 
+ *	backward compatibility reasons, if not given assumes action frames) 
+ *	and a match attribute containing the first few bytes of the frame 
+ *	that should match, e.g. a single byte for only a category match or 
+ *	four bytes for vendor frames including the OUI. The registration 
+ *	cannot be dropped, but is removed automatically when the netlink 
+ *	socket is closed. Multiple registrations can be made. 
+ * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for 
+ *	backward compatibility 
+ * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This 
+ *	command is used both as a request to transmit a management frame and 
+ *	as an event indicating reception of a frame that was not processed in 
+ *	kernel code, but is for us (i.e., which may need to be processed in a 
+ *	user space application). %NL80211_ATTR_FRAME is used to specify the 
+ *	frame contents (including header). %NL80211_ATTR_WIPHY_FREQ is used 
+ *	to indicate on which channel the frame is to be transmitted or was 
+ *	received. If this channel is not the current channel (remain-on-channel 
+ *	or the operational channel) the device will switch to the given channel 
+ *	and transmit the frame, optionally waiting for a response for the time 
+ *	specified using %NL80211_ATTR_DURATION. When called, this operation 
+ *	returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the 
+ *	TX status event pertaining to the TX request. 
+ *	%NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the 
+ *	management frames at CCK rate or not in 2GHz band. 
+ *	%NL80211_ATTR_CSA_C_OFFSETS_TX is an array of offsets to CSA 
+ *	counters which will be updated to the current value. This attribute 
+ *	is used during CSA period. 
+ * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this 
+ *	command may be used with the corresponding cookie to cancel the wait 
+ *	time if it is known that it is no longer necessary.  This command is 
+ *	also sent as an event whenever the driver has completed the off-channel 
+ *	wait time. 
+ * @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility. 
+ * @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame 
+ *	transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies 
+ *	the TX command and %NL80211_ATTR_FRAME includes the contents of the 
+ *	frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged 
+ *	the frame. 
+ * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for 
+ *	backward compatibility. 
+ * 
+ * @NL80211_CMD_SET_POWER_SAVE: Set powersave, using %NL80211_ATTR_PS_STATE 
+ * @NL80211_CMD_GET_POWER_SAVE: Get powersave status in %NL80211_ATTR_PS_STATE 
+ * 
+ * @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command 
+ *	is used to configure connection quality monitoring notification trigger 
+ *	levels. 
+ * @NL80211_CMD_NOTIFY_CQM: Connection quality monitor notification. This 
+ *	command is used as an event to indicate the that a trigger level was 
+ *	reached. 
+ * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ 
+ *	and the attributes determining channel width) the given interface 
+ *	(identifed by %NL80211_ATTR_IFINDEX) shall operate on. 
+ *	In case multiple channels are supported by the device, the mechanism 
+ *	with which it switches channels is implementation-defined. 
+ *	When a monitor interface is given, it can only switch channel while 
+ *	no other interfaces are operating to avoid disturbing the operation 
+ *	of any other interfaces, and other interfaces will again take 
+ *	precedence when they are used. 
+ * 
+ * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface. 
+ * 
+ * @NL80211_CMD_SET_MULTICAST_TO_UNICAST: Configure if this AP should perform 
+ *	multicast to unicast conversion. When enabled, all multicast packets 
+ *	with ethertype ARP, IPv4 or IPv6 (possibly within an 802.1Q header) 
+ *	will be sent out to each station once with the destination (multicast) 
+ *	MAC address replaced by the station's MAC address. Note that this may 
+ *	break certain expectations of the receiver, e.g. the ability to drop 
+ *	unicast IP packets encapsulated in multicast L2 frames, or the ability 
+ *	to not send destination unreachable messages in such cases. 
+ *	This can only be toggled per BSS. Configure this on an interface of 
+ *	type %NL80211_IFTYPE_AP. It applies to all its VLAN interfaces 
+ *	(%NL80211_IFTYPE_AP_VLAN), except for those in 4addr (WDS) mode. 
+ *	If %NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED is not present with this 
+ *	command, the feature is disabled. 
+ * 
+ * @NL80211_CMD_JOIN_MESH: Join a mesh. The mesh ID must be given, and initial 
+ *	mesh config parameters may be given. 
+ * @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the 
+ *	network is determined by the network interface. 
+ * 
+ * @NL80211_CMD_UNPROT_DEAUTHENTICATE: Unprotected deauthentication frame 
+ *	notification. This event is used to indicate that an unprotected 
+ *	deauthentication frame was dropped when MFP is in use. 
+ * @NL80211_CMD_UNPROT_DISASSOCIATE: Unprotected disassociation frame 
+ *	notification. This event is used to indicate that an unprotected 
+ *	disassociation frame was dropped when MFP is in use. 
+ * 
+ * @NL80211_CMD_NEW_PEER_CANDIDATE: Notification on the reception of a 
+ *      beacon or probe response from a compatible mesh peer.  This is only 
+ *      sent while no station information (sta_info) exists for the new peer 
+ *      candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH, 
+ *      @NL80211_MESH_SETUP_USERSPACE_AMPE, or 
+ *      @NL80211_MESH_SETUP_USERSPACE_MPM is set.  On reception of this 
+ *      notification, userspace may decide to create a new station 
+ *      (@NL80211_CMD_NEW_STATION).  To stop this notification from 
+ *      reoccurring, the userspace authentication daemon may want to create the 
+ *      new station with the AUTHENTICATED flag unset and maybe change it later 
+ *      depending on the authentication result. 
+ * 
+ * @NL80211_CMD_GET_WOWLAN: get Wake-on-Wireless-LAN (WoWLAN) settings. 
+ * @NL80211_CMD_SET_WOWLAN: set Wake-on-Wireless-LAN (WoWLAN) settings. 
+ *	Since wireless is more complex than wired ethernet, it supports 
+ *	various triggers. These triggers can be configured through this 
+ *	command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For 
+ *	more background information, see 
+ *	http://wireless.kernel.org/en/users/Documentation/WoWLAN. 
+ *	The @NL80211_CMD_SET_WOWLAN command can also be used as a notification 
+ *	from the driver reporting the wakeup reason. In this case, the 
+ *	@NL80211_ATTR_WOWLAN_TRIGGERS attribute will contain the reason 
+ *	for the wakeup, if it was caused by wireless. If it is not present 
+ *	in the wakeup notification, the wireless device didn't cause the 
+ *	wakeup but reports that it was woken up. 
+ * 
+ * @NL80211_CMD_SET_REKEY_OFFLOAD: This command is used give the driver 
+ *	the necessary information for supporting GTK rekey offload. This 
+ *	feature is typically used during WoWLAN. The configuration data 
+ *	is contained in %NL80211_ATTR_REKEY_DATA (which is nested and 
+ *	contains the data in sub-attributes). After rekeying happened, 
+ *	this command may also be sent by the driver as an MLME event to 
+ *	inform userspace of the new replay counter. 
+ * 
+ * @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace 
+ *	of PMKSA caching dandidates. 
+ * 
+ * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup). 
+ *	In addition, this can be used as an event to request userspace to take 
+ *	actions on TDLS links (set up a new link or tear down an existing one). 
+ *	In such events, %NL80211_ATTR_TDLS_OPERATION indicates the requested 
+ *	operation, %NL80211_ATTR_MAC contains the peer MAC address, and 
+ *	%NL80211_ATTR_REASON_CODE the reason code to be used (only with 
+ *	%NL80211_TDLS_TEARDOWN). 
+ * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame. The 
+ *	%NL80211_ATTR_TDLS_ACTION attribute determines the type of frame to be 
+ *	sent. Public Action codes (802.11-2012 8.1.5.1) will be sent as 
+ *	802.11 management frames, while TDLS action codes (802.11-2012 
+ *	8.5.13.1) will be encapsulated and sent as data frames. The currently 
+ *	supported Public Action code is %WLAN_PUB_ACTION_TDLS_DISCOVER_RES 
+ *	and the currently supported TDLS actions codes are given in 
+ *	&enum ieee80211_tdls_actioncode. 
+ * 
+ * @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP 
+ *	(or GO) interface (i.e. hostapd) to ask for unexpected frames to 
+ *	implement sending deauth to stations that send unexpected class 3 
+ *	frames. Also used as the event sent by the kernel when such a frame 
+ *	is received. 
+ *	For the event, the %NL80211_ATTR_MAC attribute carries the TA and 
+ *	other attributes like the interface index are present. 
+ *	If used as the command it must have an interface index and you can 
+ *	only unsubscribe from the event by closing the socket. Subscription 
+ *	is also for %NL80211_CMD_UNEXPECTED_4ADDR_FRAME events. 
+ * 
+ * @NL80211_CMD_UNEXPECTED_4ADDR_FRAME: Sent as an event indicating that the 
+ *	associated station identified by %NL80211_ATTR_MAC sent a 4addr frame 
+ *	and wasn't already in a 4-addr VLAN. The event will be sent similarly 
+ *	to the %NL80211_CMD_UNEXPECTED_FRAME event, to the same listener. 
+ * 
+ * @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface 
+ *	by sending a null data frame to it and reporting when the frame is 
+ *	acknowleged. This is used to allow timing out inactive clients. Uses 
+ *	%NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a 
+ *	direct reply with an %NL80211_ATTR_COOKIE that is later used to match 
+ *	up the event with the request. The event includes the same data and 
+ *	has %NL80211_ATTR_ACK set if the frame was ACKed. 
+ * 
+ * @NL80211_CMD_REGISTER_BEACONS: Register this socket to receive beacons from 
+ *	other BSSes when any interfaces are in AP mode. This helps implement 
+ *	OLBC handling in hostapd. Beacons are reported in %NL80211_CMD_FRAME 
+ *	messages. Note that per PHY only one application may register. 
+ * 
+ * @NL80211_CMD_SET_NOACK_MAP: sets a bitmap for the individual TIDs whether 
+ *      No Acknowledgement Policy should be applied. 
+ * 
+ * @NL80211_CMD_CH_SWITCH_NOTIFY: An AP or GO may decide to switch channels 
+ *	independently of the userspace SME, send this event indicating 
+ *	%NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ and the 
+ *	attributes determining channel width.  This indication may also be 
+ *	sent when a remotely-initiated switch (e.g., when a STA receives a CSA 
+ *	from the remote AP) is completed; 
+ * 
+ * @NL80211_CMD_CH_SWITCH_STARTED_NOTIFY: Notify that a channel switch 
+ *	has been started on an interface, regardless of the initiator 
+ *	(ie. whether it was requested from a remote device or 
+ *	initiated on our own).  It indicates that 
+ *	%NL80211_ATTR_IFINDEX will be on %NL80211_ATTR_WIPHY_FREQ 
+ *	after %NL80211_ATTR_CH_SWITCH_COUNT TBTT's.  The userspace may 
+ *	decide to react to this indication by requesting other 
+ *	interfaces to change channel as well. 
+ * 
+ * @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by 
+ *	its %NL80211_ATTR_WDEV identifier. It must have been created with 
+ *	%NL80211_CMD_NEW_INTERFACE previously. After it has been started, the 
+ *	P2P Device can be used for P2P operations, e.g. remain-on-channel and 
+ *	public action frame TX. 
+ * @NL80211_CMD_STOP_P2P_DEVICE: Stop the given P2P Device, identified by 
+ *	its %NL80211_ATTR_WDEV identifier. 
+ * 
+ * @NL80211_CMD_CONN_FAILED: connection request to an AP failed; used to 
+ *	notify userspace that AP has rejected the connection request from a 
+ *	station, due to particular reason. %NL80211_ATTR_CONN_FAILED_REASON 
+ *	is used for this. 
+ * 
+ * @NL80211_CMD_SET_MCAST_RATE: Change the rate used to send multicast frames 
+ *	for IBSS or MESH vif. 
+ * 
+ * @NL80211_CMD_SET_MAC_ACL: sets ACL for MAC address based access control. 
+ *	This is to be used with the drivers advertising the support of MAC 
+ *	address based access control. List of MAC addresses is passed in 
+ *	%NL80211_ATTR_MAC_ADDRS and ACL policy is passed in 
+ *	%NL80211_ATTR_ACL_POLICY. Driver will enable ACL with this list, if it 
+ *	is not already done. The new list will replace any existing list. Driver 
+ *	will clear its ACL when the list of MAC addresses passed is empty. This 
+ *	command is used in AP/P2P GO mode. Driver has to make sure to clear its 
+ *	ACL list during %NL80211_CMD_STOP_AP. 
+ * 
+ * @NL80211_CMD_RADAR_DETECT: Start a Channel availability check (CAC). Once 
+ *	a radar is detected or the channel availability scan (CAC) has finished 
+ *	or was aborted, or a radar was detected, usermode will be notified with 
+ *	this event. This command is also used to notify userspace about radars 
+ *	while operating on this channel. 
+ *	%NL80211_ATTR_RADAR_EVENT is used to inform about the type of the 
+ *	event. 
+ * 
+ * @NL80211_CMD_GET_PROTOCOL_FEATURES: Get global nl80211 protocol features, 
+ *	i.e. features for the nl80211 protocol rather than device features. 
+ *	Returns the features in the %NL80211_ATTR_PROTOCOL_FEATURES bitmap. 
+ * 
+ * @NL80211_CMD_UPDATE_FT_IES: Pass down the most up-to-date Fast Transition 
+ *	Information Element to the WLAN driver 
+ * 
+ * @NL80211_CMD_FT_EVENT: Send a Fast transition event from the WLAN driver 
+ *	to the supplicant. This will carry the target AP's MAC address along 
+ *	with the relevant Information Elements. This event is used to report 
+ *	received FT IEs (MDIE, FTIE, RSN IE, TIE, RICIE). 
+ * 
+ * @NL80211_CMD_CRIT_PROTOCOL_START: Indicates user-space will start running 
+ *	a critical protocol that needs more reliability in the connection to 
+ *	complete. 
+ * 
+ * @NL80211_CMD_CRIT_PROTOCOL_STOP: Indicates the connection reliability can 
+ *	return back to normal. 
+ * 
+ * @NL80211_CMD_GET_COALESCE: Get currently supported coalesce rules. 
+ * @NL80211_CMD_SET_COALESCE: Configure coalesce rules or clear existing rules. 
+ * 
+ * @NL80211_CMD_CHANNEL_SWITCH: Perform a channel switch by announcing the 
+ *	the new channel information (Channel Switch Announcement - CSA) 
+ *	in the beacon for some time (as defined in the 
+ *	%NL80211_ATTR_CH_SWITCH_COUNT parameter) and then change to the 
+ *	new channel. Userspace provides the new channel information (using 
+ *	%NL80211_ATTR_WIPHY_FREQ and the attributes determining channel 
+ *	width). %NL80211_ATTR_CH_SWITCH_BLOCK_TX may be supplied to inform 
+ *	other station that transmission must be blocked until the channel 
+ *	switch is complete. 
+ * 
+ * @NL80211_CMD_VENDOR: Vendor-specified command/event. The command is specified 
+ *	by the %NL80211_ATTR_VENDOR_ID attribute and a sub-command in 
+ *	%NL80211_ATTR_VENDOR_SUBCMD. Parameter(s) can be transported in 
+ *	%NL80211_ATTR_VENDOR_DATA. 
+ *	For feature advertisement, the %NL80211_ATTR_VENDOR_DATA attribute is 
+ *	used in the wiphy data as a nested attribute containing descriptions 
+ *	(&struct nl80211_vendor_cmd_info) of the supported vendor commands. 
+ *	This may also be sent as an event with the same attributes. 
+ * 
+ * @NL80211_CMD_SET_QOS_MAP: Set Interworking QoS mapping for IP DSCP values. 
+ *	The QoS mapping information is included in %NL80211_ATTR_QOS_MAP. If 
+ *	that attribute is not included, QoS mapping is disabled. Since this 
+ *	QoS mapping is relevant for IP packets, it is only valid during an 
+ *	association. This is cleared on disassociation and AP restart. 
+ * 
+ * @NL80211_CMD_ADD_TX_TS: Ask the kernel to add a traffic stream for the given 
+ *	%NL80211_ATTR_TSID and %NL80211_ATTR_MAC with %NL80211_ATTR_USER_PRIO 
+ *	and %NL80211_ATTR_ADMITTED_TIME parameters. 
+ *	Note that the action frame handshake with the AP shall be handled by 
+ *	userspace via the normal management RX/TX framework, this only sets 
+ *	up the TX TS in the driver/device. 
+ *	If the admitted time attribute is not added then the request just checks 
+ *	if a subsequent setup could be successful, the intent is to use this to 
+ *	avoid setting up a session with the AP when local restrictions would 
+ *	make that impossible. However, the subsequent "real" setup may still 
+ *	fail even if the check was successful. 
+ * @NL80211_CMD_DEL_TX_TS: Remove an existing TS with the %NL80211_ATTR_TSID 
+ *	and %NL80211_ATTR_MAC parameters. It isn't necessary to call this 
+ *	before removing a station entry entirely, or before disassociating 
+ *	or similar, cleanup will happen in the driver/device in this case. 
+ * 
+ * @NL80211_CMD_GET_MPP: Get mesh path attributes for mesh proxy path to 
+ *	destination %NL80211_ATTR_MAC on the interface identified by 
+ *	%NL80211_ATTR_IFINDEX. 
+ * 
+ * @NL80211_CMD_JOIN_OCB: Join the OCB network. The center frequency and 
+ *	bandwidth of a channel must be given. 
+ * @NL80211_CMD_LEAVE_OCB: Leave the OCB network -- no special arguments, the 
+ *	network is determined by the network interface. 
+ * 
+ * @NL80211_CMD_TDLS_CHANNEL_SWITCH: Start channel-switching with a TDLS peer, 
+ *	identified by the %NL80211_ATTR_MAC parameter. A target channel is 
+ *	provided via %NL80211_ATTR_WIPHY_FREQ and other attributes determining 
+ *	channel width/type. The target operating class is given via 
+ *	%NL80211_ATTR_OPER_CLASS. 
+ *	The driver is responsible for continually initiating channel-switching 
+ *	operations and returning to the base channel for communication with the 
+ *	AP. 
+ * @NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH: Stop channel-switching with a TDLS 
+ *	peer given by %NL80211_ATTR_MAC. Both peers must be on the base channel 
+ *	when this command completes. 
+ * 
+ * @NL80211_CMD_WIPHY_REG_CHANGE: Similar to %NL80211_CMD_REG_CHANGE, but used 
+ *	as an event to indicate changes for devices with wiphy-specific regdom 
+ *	management. 
+ * 
+ * @NL80211_CMD_ABORT_SCAN: Stop an ongoing scan. Returns -ENOENT if a scan is 
+ *	not running. The driver indicates the status of the scan through 
+ *	cfg80211_scan_done(). 
+ * 
+ * @NL80211_CMD_START_NAN: Start NAN operation, identified by its 
+ *	%NL80211_ATTR_WDEV interface. This interface must have been 
+ *	previously created with %NL80211_CMD_NEW_INTERFACE. After it 
+ *	has been started, the NAN interface will create or join a 
+ *	cluster. This command must have a valid 
+ *	%NL80211_ATTR_NAN_MASTER_PREF attribute and optional 
+ *	%NL80211_ATTR_BANDS attributes.  If %NL80211_ATTR_BANDS is 
+ *	omitted or set to 0, it means don't-care and the device will 
+ *	decide what to use.  After this command NAN functions can be 
+ *	added. 
+ * @NL80211_CMD_STOP_NAN: Stop the NAN operation, identified by 
+ *	its %NL80211_ATTR_WDEV interface. 
+ * @NL80211_CMD_ADD_NAN_FUNCTION: Add a NAN function. The function is defined 
+ *	with %NL80211_ATTR_NAN_FUNC nested attribute. When called, this 
+ *	operation returns the strictly positive and unique instance id 
+ *	(%NL80211_ATTR_NAN_FUNC_INST_ID) and a cookie (%NL80211_ATTR_COOKIE) 
+ *	of the function upon success. 
+ *	Since instance ID's can be re-used, this cookie is the right 
+ *	way to identify the function. This will avoid races when a termination 
+ *	event is handled by the user space after it has already added a new 
+ *	function that got the same instance id from the kernel as the one 
+ *	which just terminated. 
+ *	This cookie may be used in NAN events even before the command 
+ *	returns, so userspace shouldn't process NAN events until it processes 
+ *	the response to this command. 
+ *	Look at %NL80211_ATTR_SOCKET_OWNER as well. 
+ * @NL80211_CMD_DEL_NAN_FUNCTION: Delete a NAN function by cookie. 
+ *	This command is also used as a notification sent when a NAN function is 
+ *	terminated. This will contain a %NL80211_ATTR_NAN_FUNC_INST_ID 
+ *	and %NL80211_ATTR_COOKIE attributes. 
+ * @NL80211_CMD_CHANGE_NAN_CONFIG: Change current NAN 
+ *	configuration. NAN must be operational (%NL80211_CMD_START_NAN 
+ *	was executed).  It must contain at least one of the following 
+ *	attributes: %NL80211_ATTR_NAN_MASTER_PREF, 
+ *	%NL80211_ATTR_BANDS.  If %NL80211_ATTR_BANDS is omitted, the 
+ *	current configuration is not changed.  If it is present but 
+ *	set to zero, the configuration is changed to don't-care 
+ *	(i.e. the device can decide what to do). 
+ * @NL80211_CMD_NAN_FUNC_MATCH: Notification sent when a match is reported. 
+ *	This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and 
+ *	%NL80211_ATTR_COOKIE. 
+ * 
+ * @NL80211_CMD_UPDATE_CONNECT_PARAMS: Update one or more connect parameters 
+ *	for subsequent roaming cases if the driver or firmware uses internal 
+ *	BSS selection. This command can be issued only while connected and it 
+ *	does not result in a change for the current association. Currently, 
+ *	only the %NL80211_ATTR_IE data is used and updated with this command. 
+ * 
+ * @NL80211_CMD_SET_PMK: For offloaded 4-Way handshake, set the PMK or PMK-R0 
+ *	for the given authenticator address (specified with %NL80211_ATTR_MAC). 
+ *	When %NL80211_ATTR_PMKR0_NAME is set, %NL80211_ATTR_PMK specifies the 
+ *	PMK-R0, otherwise it specifies the PMK. 
+ * @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously 
+ *	configured PMK for the authenticator address identified by 
+ *	%NL80211_ATTR_MAC. 
+ * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates that the 4 way 
+ *	handshake was completed successfully by the driver. The BSSID is 
+ *	specified with %NL80211_ATTR_MAC. Drivers that support 4 way handshake 
+ *	offload should send this event after indicating 802.11 association with 
+ *	%NL80211_CMD_CONNECT or %NL80211_CMD_ROAM. If the 4 way handshake failed 
+ *	%NL80211_CMD_DISCONNECT should be indicated instead. 
+ * 
+ * @NL80211_CMD_CONTROL_PORT_FRAME: Control Port (e.g. PAE) frame TX request 
+ *	and RX notification.  This command is used both as a request to transmit 
+ *	a control port frame and as a notification that a control port frame 
+ *	has been received. %NL80211_ATTR_FRAME is used to specify the 
+ *	frame contents.  The frame is the raw EAPoL data, without ethernet or 
+ *	802.11 headers. 
+ *	When used as an event indication %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, 
+ *	%NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT and %NL80211_ATTR_MAC are added 
+ *	indicating the protocol type of the received frame; whether the frame 
+ *	was received unencrypted and the MAC address of the peer respectively. 
+ * 
+ * @NL80211_CMD_RELOAD_REGDB: Request that the regdb firmware file is reloaded. 
+ * 
+ * @NL80211_CMD_EXTERNAL_AUTH: This interface is exclusively defined for host 
+ *	drivers that do not define separate commands for authentication and 
+ *	association, but rely on user space for the authentication to happen. 
+ *	This interface acts both as the event request (driver to user space) 
+ *	to trigger the authentication and command response (userspace to 
+ *	driver) to indicate the authentication status. 
+ * 
+ *	User space uses the %NL80211_CMD_CONNECT command to the host driver to 
+ *	trigger a connection. The host driver selects a BSS and further uses 
+ *	this interface to offload only the authentication part to the user 
+ *	space. Authentication frames are passed between the driver and user 
+ *	space through the %NL80211_CMD_FRAME interface. Host driver proceeds 
+ *	further with the association after getting successful authentication 
+ *	status. User space indicates the authentication status through 
+ *	%NL80211_ATTR_STATUS_CODE attribute in %NL80211_CMD_EXTERNAL_AUTH 
+ *	command interface. 
+ * 
+ *	Host driver reports this status on an authentication failure to the 
+ *	user space through the connect result as the user space would have 
+ *	initiated the connection through the connect request. 
+ * 
+ * @NL80211_CMD_STA_OPMODE_CHANGED: An event that notify station's 
+ *	ht opmode or vht opmode changes using any of %NL80211_ATTR_SMPS_MODE, 
+ *	%NL80211_ATTR_CHANNEL_WIDTH,%NL80211_ATTR_NSS attributes with its 
+ *	address(specified in %NL80211_ATTR_MAC). 
+ * 
+ * @NL80211_CMD_GET_FTM_RESPONDER_STATS: Retrieve FTM responder statistics, in 
+ *	the %NL80211_ATTR_FTM_RESPONDER_STATS attribute. 
+ * 
+ * @NL80211_CMD_PEER_MEASUREMENT_START: start a (set of) peer measurement(s) 
+ *	with the given parameters, which are encapsulated in the nested 
+ *	%NL80211_ATTR_PEER_MEASUREMENTS attribute. Optionally, MAC address 
+ *	randomization may be enabled and configured by specifying the 
+ *	%NL80211_ATTR_MAC and %NL80211_ATTR_MAC_MASK attributes. 
+ *	If a timeout is requested, use the %NL80211_ATTR_TIMEOUT attribute. 
+ *	A u64 cookie for further %NL80211_ATTR_COOKIE use is is returned in 
+ *	the netlink extended ack message. 
+ * 
+ *	To cancel a measurement, close the socket that requested it. 
+ * 
+ *	Measurement results are reported to the socket that requested the 
+ *	measurement using @NL80211_CMD_PEER_MEASUREMENT_RESULT when they 
+ *	become available, so applications must ensure a large enough socket 
+ *	buffer size. 
+ * 
+ *	Depending on driver support it may or may not be possible to start 
+ *	multiple concurrent measurements. 
+ * @NL80211_CMD_PEER_MEASUREMENT_RESULT: This command number is used for the 
+ *	result notification from the driver to the requesting socket. 
+ * @NL80211_CMD_PEER_MEASUREMENT_COMPLETE: Notification only, indicating that 
+ *	the measurement completed, using the measurement cookie 
+ *	(%NL80211_ATTR_COOKIE). 
+ * 
+ * @NL80211_CMD_NOTIFY_RADAR: Notify the kernel that a radar signal was 
+ *	detected and reported by a neighboring device on the channel 
+ *	indicated by %NL80211_ATTR_WIPHY_FREQ and other attributes 
+ *	determining the width and type. 
+ * 
+ * @NL80211_CMD_UPDATE_OWE_INFO: This interface allows the host driver to 
+ *	offload OWE processing to user space. This intends to support 
+ *	OWE AKM by the host drivers that implement SME but rely 
+ *	on the user space for the cryptographic/DH IE processing in AP mode. 
+ * 
+ * @NL80211_CMD_PROBE_MESH_LINK: The requirement for mesh link metric 
+ *	refreshing, is that from one mesh point we be able to send some data 
+ *	frames to other mesh points which are not currently selected as a 
+ *	primary traffic path, but which are only 1 hop away. The absence of 
+ *	the primary path to the chosen node makes it necessary to apply some 
+ *	form of marking on a chosen packet stream so that the packets can be 
+ *	properly steered to the selected node for testing, and not by the 
+ *	regular mesh path lookup. Further, the packets must be of type data 
+ *	so that the rate control (often embedded in firmware) is used for 
+ *	rate selection. 
+ * 
+ *	Here attribute %NL80211_ATTR_MAC is used to specify connected mesh 
+ *	peer MAC address and %NL80211_ATTR_FRAME is used to specify the frame 
+ *	content. The frame is ethernet data. 
+ * 
+ * @NL80211_CMD_SET_TID_CONFIG: Data frame TID specific configuration 
+ *	is passed using %NL80211_ATTR_TID_CONFIG attribute. 
+ * 
+ * @NL80211_CMD_MAX: highest used command number 
+ * @__NL80211_CMD_AFTER_LAST: internal use 
+ */ 
+enum nl80211_commands { 
+/* don't change the order or add anything between, this is ABI! */ 
+	NL80211_CMD_UNSPEC, 
+ 
+	NL80211_CMD_GET_WIPHY,		/* can dump */ 
+	NL80211_CMD_SET_WIPHY, 
+	NL80211_CMD_NEW_WIPHY, 
+	NL80211_CMD_DEL_WIPHY, 
+ 
+	NL80211_CMD_GET_INTERFACE,	/* can dump */ 
+	NL80211_CMD_SET_INTERFACE, 
+	NL80211_CMD_NEW_INTERFACE, 
+	NL80211_CMD_DEL_INTERFACE, 
+ 
+	NL80211_CMD_GET_KEY, 
+	NL80211_CMD_SET_KEY, 
+	NL80211_CMD_NEW_KEY, 
+	NL80211_CMD_DEL_KEY, 
+ 
+	NL80211_CMD_GET_BEACON, 
+	NL80211_CMD_SET_BEACON, 
+	NL80211_CMD_START_AP, 
+	NL80211_CMD_NEW_BEACON = NL80211_CMD_START_AP, 
+	NL80211_CMD_STOP_AP, 
+	NL80211_CMD_DEL_BEACON = NL80211_CMD_STOP_AP, 
+ 
+	NL80211_CMD_GET_STATION, 
+	NL80211_CMD_SET_STATION, 
+	NL80211_CMD_NEW_STATION, 
+	NL80211_CMD_DEL_STATION, 
+ 
+	NL80211_CMD_GET_MPATH, 
+	NL80211_CMD_SET_MPATH, 
+	NL80211_CMD_NEW_MPATH, 
+	NL80211_CMD_DEL_MPATH, 
+ 
+	NL80211_CMD_SET_BSS, 
+ 
+	NL80211_CMD_SET_REG, 
+	NL80211_CMD_REQ_SET_REG, 
+ 
+	NL80211_CMD_GET_MESH_CONFIG, 
+	NL80211_CMD_SET_MESH_CONFIG, 
+ 
+	NL80211_CMD_SET_MGMT_EXTRA_IE /* reserved; not used */, 
+ 
+	NL80211_CMD_GET_REG, 
+ 
+	NL80211_CMD_GET_SCAN, 
+	NL80211_CMD_TRIGGER_SCAN, 
+	NL80211_CMD_NEW_SCAN_RESULTS, 
+	NL80211_CMD_SCAN_ABORTED, 
+ 
+	NL80211_CMD_REG_CHANGE, 
+ 
+	NL80211_CMD_AUTHENTICATE, 
+	NL80211_CMD_ASSOCIATE, 
+	NL80211_CMD_DEAUTHENTICATE, 
+	NL80211_CMD_DISASSOCIATE, 
+ 
+	NL80211_CMD_MICHAEL_MIC_FAILURE, 
+ 
+	NL80211_CMD_REG_BEACON_HINT, 
+ 
+	NL80211_CMD_JOIN_IBSS, 
+	NL80211_CMD_LEAVE_IBSS, 
+ 
+	NL80211_CMD_TESTMODE, 
+ 
+	NL80211_CMD_CONNECT, 
+	NL80211_CMD_ROAM, 
+	NL80211_CMD_DISCONNECT, 
+ 
+	NL80211_CMD_SET_WIPHY_NETNS, 
+ 
+	NL80211_CMD_GET_SURVEY, 
+	NL80211_CMD_NEW_SURVEY_RESULTS, 
+ 
+	NL80211_CMD_SET_PMKSA, 
+	NL80211_CMD_DEL_PMKSA, 
+	NL80211_CMD_FLUSH_PMKSA, 
+ 
+	NL80211_CMD_REMAIN_ON_CHANNEL, 
+	NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL, 
+ 
+	NL80211_CMD_SET_TX_BITRATE_MASK, 
+ 
+	NL80211_CMD_REGISTER_FRAME, 
+	NL80211_CMD_REGISTER_ACTION = NL80211_CMD_REGISTER_FRAME, 
+	NL80211_CMD_FRAME, 
+	NL80211_CMD_ACTION = NL80211_CMD_FRAME, 
+	NL80211_CMD_FRAME_TX_STATUS, 
+	NL80211_CMD_ACTION_TX_STATUS = NL80211_CMD_FRAME_TX_STATUS, 
+ 
+	NL80211_CMD_SET_POWER_SAVE, 
+	NL80211_CMD_GET_POWER_SAVE, 
+ 
+	NL80211_CMD_SET_CQM, 
+	NL80211_CMD_NOTIFY_CQM, 
+ 
+	NL80211_CMD_SET_CHANNEL, 
+	NL80211_CMD_SET_WDS_PEER, 
+ 
+	NL80211_CMD_FRAME_WAIT_CANCEL, 
+ 
+	NL80211_CMD_JOIN_MESH, 
+	NL80211_CMD_LEAVE_MESH, 
+ 
+	NL80211_CMD_UNPROT_DEAUTHENTICATE, 
+	NL80211_CMD_UNPROT_DISASSOCIATE, 
+ 
+	NL80211_CMD_NEW_PEER_CANDIDATE, 
+ 
+	NL80211_CMD_GET_WOWLAN, 
+	NL80211_CMD_SET_WOWLAN, 
+ 
+	NL80211_CMD_START_SCHED_SCAN, 
+	NL80211_CMD_STOP_SCHED_SCAN, 
+	NL80211_CMD_SCHED_SCAN_RESULTS, 
+	NL80211_CMD_SCHED_SCAN_STOPPED, 
+ 
+	NL80211_CMD_SET_REKEY_OFFLOAD, 
+ 
+	NL80211_CMD_PMKSA_CANDIDATE, 
+ 
+	NL80211_CMD_TDLS_OPER, 
+	NL80211_CMD_TDLS_MGMT, 
+ 
+	NL80211_CMD_UNEXPECTED_FRAME, 
+ 
+	NL80211_CMD_PROBE_CLIENT, 
+ 
+	NL80211_CMD_REGISTER_BEACONS, 
+ 
+	NL80211_CMD_UNEXPECTED_4ADDR_FRAME, 
+ 
+	NL80211_CMD_SET_NOACK_MAP, 
+ 
+	NL80211_CMD_CH_SWITCH_NOTIFY, 
+ 
+	NL80211_CMD_START_P2P_DEVICE, 
+	NL80211_CMD_STOP_P2P_DEVICE, 
+ 
+	NL80211_CMD_CONN_FAILED, 
+ 
+	NL80211_CMD_SET_MCAST_RATE, 
+ 
+	NL80211_CMD_SET_MAC_ACL, 
+ 
+	NL80211_CMD_RADAR_DETECT, 
+ 
+	NL80211_CMD_GET_PROTOCOL_FEATURES, 
+ 
+	NL80211_CMD_UPDATE_FT_IES, 
+	NL80211_CMD_FT_EVENT, 
+ 
+	NL80211_CMD_CRIT_PROTOCOL_START, 
+	NL80211_CMD_CRIT_PROTOCOL_STOP, 
+ 
+	NL80211_CMD_GET_COALESCE, 
+	NL80211_CMD_SET_COALESCE, 
+ 
+	NL80211_CMD_CHANNEL_SWITCH, 
+ 
+	NL80211_CMD_VENDOR, 
+ 
+	NL80211_CMD_SET_QOS_MAP, 
+ 
+	NL80211_CMD_ADD_TX_TS, 
+	NL80211_CMD_DEL_TX_TS, 
+ 
+	NL80211_CMD_GET_MPP, 
+ 
+	NL80211_CMD_JOIN_OCB, 
+	NL80211_CMD_LEAVE_OCB, 
+ 
+	NL80211_CMD_CH_SWITCH_STARTED_NOTIFY, 
+ 
+	NL80211_CMD_TDLS_CHANNEL_SWITCH, 
+	NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH, 
+ 
+	NL80211_CMD_WIPHY_REG_CHANGE, 
+ 
+	NL80211_CMD_ABORT_SCAN, 
+ 
+	NL80211_CMD_START_NAN, 
+	NL80211_CMD_STOP_NAN, 
+	NL80211_CMD_ADD_NAN_FUNCTION, 
+	NL80211_CMD_DEL_NAN_FUNCTION, 
+	NL80211_CMD_CHANGE_NAN_CONFIG, 
+	NL80211_CMD_NAN_MATCH, 
+ 
+	NL80211_CMD_SET_MULTICAST_TO_UNICAST, 
+ 
+	NL80211_CMD_UPDATE_CONNECT_PARAMS, 
+ 
+	NL80211_CMD_SET_PMK, 
+	NL80211_CMD_DEL_PMK, 
+ 
+	NL80211_CMD_PORT_AUTHORIZED, 
+ 
+	NL80211_CMD_RELOAD_REGDB, 
+ 
+	NL80211_CMD_EXTERNAL_AUTH, 
+ 
+	NL80211_CMD_STA_OPMODE_CHANGED, 
+ 
+	NL80211_CMD_CONTROL_PORT_FRAME, 
+ 
+	NL80211_CMD_GET_FTM_RESPONDER_STATS, 
+ 
+	NL80211_CMD_PEER_MEASUREMENT_START, 
+	NL80211_CMD_PEER_MEASUREMENT_RESULT, 
+	NL80211_CMD_PEER_MEASUREMENT_COMPLETE, 
+ 
+	NL80211_CMD_NOTIFY_RADAR, 
+ 
+	NL80211_CMD_UPDATE_OWE_INFO, 
+ 
+	NL80211_CMD_PROBE_MESH_LINK, 
+ 
+	NL80211_CMD_SET_TID_CONFIG, 
+ 
+	/* add new commands above here */ 
+ 
+	/* used to define NL80211_CMD_MAX below */ 
+	__NL80211_CMD_AFTER_LAST, 
+	NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1 
+}; 
+ 
+/* 
+ * Allow user space programs to use #ifdef on new commands by defining them 
+ * here 
+ */ 
+#define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS 
+#define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE 
+#define NL80211_CMD_REG_CHANGE NL80211_CMD_REG_CHANGE 
+#define NL80211_CMD_AUTHENTICATE NL80211_CMD_AUTHENTICATE 
+#define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE 
+#define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE 
+#define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE 
+#define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT 
+ 
+#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS 
+ 
+/* source-level API compatibility */ 
+#define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG 
+#define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG 
+#define NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE NL80211_MESH_SETUP_IE 
+ 
+/** 
+ * enum nl80211_attrs - nl80211 netlink attributes 
+ * 
+ * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors 
+ * 
+ * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf. 
+ *	/sys/class/ieee80211/<phyname>/index 
+ * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming) 
+ * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters 
+ * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz, 
+ *	defines the channel together with the (deprecated) 
+ *	%NL80211_ATTR_WIPHY_CHANNEL_TYPE attribute or the attributes 
+ *	%NL80211_ATTR_CHANNEL_WIDTH and if needed %NL80211_ATTR_CENTER_FREQ1 
+ *	and %NL80211_ATTR_CENTER_FREQ2 
+ * @NL80211_ATTR_CHANNEL_WIDTH: u32 attribute containing one of the values 
+ *	of &enum nl80211_chan_width, describing the channel width. See the 
+ *	documentation of the enum for more information. 
+ * @NL80211_ATTR_CENTER_FREQ1: Center frequency of the first part of the 
+ *	channel, used for anything but 20 MHz bandwidth 
+ * @NL80211_ATTR_CENTER_FREQ2: Center frequency of the second part of the 
+ *	channel, used only for 80+80 MHz bandwidth 
+ * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ 
+ *	if HT20 or HT40 are to be used (i.e., HT disabled if not included): 
+ *	NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including 
+ *		this attribute) 
+ *	NL80211_CHAN_HT20 = HT20 only 
+ *	NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel 
+ *	NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel 
+ *	This attribute is now deprecated. 
+ * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is 
+ *	less than or equal to the RTS threshold; allowed range: 1..255; 
+ *	dot11ShortRetryLimit; u8 
+ * @NL80211_ATTR_WIPHY_RETRY_LONG: TX retry limit for frames whose length is 
+ *	greater than the RTS threshold; allowed range: 1..255; 
+ *	dot11ShortLongLimit; u8 
+ * @NL80211_ATTR_WIPHY_FRAG_THRESHOLD: fragmentation threshold, i.e., maximum 
+ *	length in octets for frames; allowed range: 256..8000, disable 
+ *	fragmentation with (u32)-1; dot11FragmentationThreshold; u32 
+ * @NL80211_ATTR_WIPHY_RTS_THRESHOLD: RTS threshold (TX frames with length 
+ *	larger than or equal to this use RTS/CTS handshake); allowed range: 
+ *	0..65536, disable with (u32)-1; dot11RTSThreshold; u32 
+ * @NL80211_ATTR_WIPHY_COVERAGE_CLASS: Coverage Class as defined by IEEE 802.11 
+ *	section 7.3.2.9; dot11CoverageClass; u8 
+ * 
+ * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on 
+ * @NL80211_ATTR_IFNAME: network interface name 
+ * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype 
+ * 
+ * @NL80211_ATTR_WDEV: wireless device identifier, used for pseudo-devices 
+ *	that don't have a netdev (u64) 
+ * 
+ * @NL80211_ATTR_MAC: MAC address (various uses) 
+ * 
+ * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of 
+ *	16 bytes encryption key followed by 8 bytes each for TX and RX MIC 
+ *	keys 
+ * @NL80211_ATTR_KEY_IDX: key ID (u8, 0-3) 
+ * @NL80211_ATTR_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11 
+ *	section 7.3.2.25.1, e.g. 0x000FAC04) 
+ * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and 
+ *	CCMP keys, each six bytes in little endian 
+ * @NL80211_ATTR_KEY_DEFAULT: Flag attribute indicating the key is default key 
+ * @NL80211_ATTR_KEY_DEFAULT_MGMT: Flag attribute indicating the key is the 
+ *	default management key 
+ * @NL80211_ATTR_CIPHER_SUITES_PAIRWISE: For crypto settings for connect or 
+ *	other commands, indicates which pairwise cipher suites are used 
+ * @NL80211_ATTR_CIPHER_SUITE_GROUP: For crypto settings for connect or 
+ *	other commands, indicates which group cipher suite is used 
+ * 
+ * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU 
+ * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing 
+ * @NL80211_ATTR_BEACON_HEAD: portion of the beacon before the TIM IE 
+ * @NL80211_ATTR_BEACON_TAIL: portion of the beacon after the TIM IE 
+ * 
+ * @NL80211_ATTR_STA_AID: Association ID for the station (u16) 
+ * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of 
+ *	&enum nl80211_sta_flags (deprecated, use %NL80211_ATTR_STA_FLAGS2) 
+ * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by 
+ *	IEEE 802.11 7.3.1.6 (u16). 
+ * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported 
+ *	rates as defined by IEEE 802.11 7.3.2.2 but without the length 
+ *	restriction (at most %NL80211_MAX_SUPP_RATES). 
+ * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station 
+ *	to, or the AP interface the station was originally added to to. 
+ * @NL80211_ATTR_STA_INFO: information about a station, part of station info 
+ *	given for %NL80211_CMD_GET_STATION, nested attribute containing 
+ *	info as possible, see &enum nl80211_sta_info. 
+ * 
+ * @NL80211_ATTR_WIPHY_BANDS: Information about an operating bands, 
+ *	consisting of a nested array. 
+ * 
+ * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes). 
+ * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link 
+ *	(see &enum nl80211_plink_action). 
+ * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path. 
+ * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path 
+ * 	info given for %NL80211_CMD_GET_MPATH, nested attribute described at 
+ *	&enum nl80211_mpath_info. 
+ * 
+ * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of 
+ *      &enum nl80211_mntr_flags. 
+ * 
+ * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the 
+ * 	current regulatory domain should be set to or is already set to. 
+ * 	For example, 'CR', for Costa Rica. This attribute is used by the kernel 
+ * 	to query the CRDA to retrieve one regulatory domain. This attribute can 
+ * 	also be used by userspace to query the kernel for the currently set 
+ * 	regulatory domain. We chose an alpha2 as that is also used by the 
+ * 	IEEE-802.11 country information element to identify a country. 
+ * 	Users can also simply ask the wireless core to set regulatory domain 
+ * 	to a specific alpha2. 
+ * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory 
+ *	rules. 
+ * 
+ * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1) 
+ * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled 
+ *	(u8, 0 or 1) 
+ * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled 
+ *	(u8, 0 or 1) 
+ * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic 
+ *	rates in format defined by IEEE 802.11 7.3.2.2 but without the length 
+ *	restriction (at most %NL80211_MAX_SUPP_RATES). 
+ * 
+ * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from 
+ *	association request when used with NL80211_CMD_NEW_STATION) 
+ * 
+ * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all 
+ *	supported interface types, each a flag attribute with the number 
+ *	of the interface mode. 
+ * 
+ * @NL80211_ATTR_MGMT_SUBTYPE: Management frame subtype for 
+ *	%NL80211_CMD_SET_MGMT_EXTRA_IE. 
+ * 
+ * @NL80211_ATTR_IE: Information element(s) data (used, e.g., with 
+ *	%NL80211_CMD_SET_MGMT_EXTRA_IE). 
+ * 
+ * @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with 
+ *	a single scan request, a wiphy attribute. 
+ * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS: number of SSIDs you can 
+ *	scan with a single scheduled scan request, a wiphy attribute. 
+ * @NL80211_ATTR_MAX_SCAN_IE_LEN: maximum length of information elements 
+ *	that can be added to a scan request 
+ * @NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN: maximum length of information 
+ *	elements that can be added to a scheduled scan request 
+ * @NL80211_ATTR_MAX_MATCH_SETS: maximum number of sets that can be 
+ *	used with @NL80211_ATTR_SCHED_SCAN_MATCH, a wiphy attribute. 
+ * 
+ * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz) 
+ * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive 
+ *	scanning and include a zero-length SSID (wildcard) for wildcard scan 
+ * @NL80211_ATTR_BSS: scan result BSS 
+ * 
+ * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain 
+ * 	currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_* 
+ * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently 
+ * 	set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*) 
+ * 
+ * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies 
+ *	an array of command numbers (i.e. a mapping index to command number) 
+ *	that the driver for the given wiphy supports. 
+ * 
+ * @NL80211_ATTR_FRAME: frame data (binary attribute), including frame header 
+ *	and body, but not FCS; used, e.g., with NL80211_CMD_AUTHENTICATE and 
+ *	NL80211_CMD_ASSOCIATE events 
+ * @NL80211_ATTR_SSID: SSID (binary attribute, 0..32 octets) 
+ * @NL80211_ATTR_AUTH_TYPE: AuthenticationType, see &enum nl80211_auth_type, 
+ *	represented as a u32 
+ * @NL80211_ATTR_REASON_CODE: ReasonCode for %NL80211_CMD_DEAUTHENTICATE and 
+ *	%NL80211_CMD_DISASSOCIATE, u16 
+ * 
+ * @NL80211_ATTR_KEY_TYPE: Key Type, see &enum nl80211_key_type, represented as 
+ *	a u32 
+ * 
+ * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change 
+ * 	due to considerations from a beacon hint. This attribute reflects 
+ * 	the state of the channel _before_ the beacon hint processing. This 
+ * 	attributes consists of a nested attribute containing 
+ * 	NL80211_FREQUENCY_ATTR_* 
+ * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change 
+ * 	due to considerations from a beacon hint. This attribute reflects 
+ * 	the state of the channel _after_ the beacon hint processing. This 
+ * 	attributes consists of a nested attribute containing 
+ * 	NL80211_FREQUENCY_ATTR_* 
+ * 
+ * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported 
+ *	cipher suites 
+ * 
+ * @NL80211_ATTR_FREQ_FIXED: a flag indicating the IBSS should not try to look 
+ *	for other networks on different channels 
+ * 
+ * @NL80211_ATTR_TIMED_OUT: a flag indicating than an operation timed out; this 
+ *	is used, e.g., with %NL80211_CMD_AUTHENTICATE event 
+ * 
+ * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is 
+ *	used for the association (&enum nl80211_mfp, represented as a u32); 
+ *	this attribute can be used with %NL80211_CMD_ASSOCIATE and 
+ *	%NL80211_CMD_CONNECT requests. %NL80211_MFP_OPTIONAL is not allowed for 
+ *	%NL80211_CMD_ASSOCIATE since user space SME is expected and hence, it 
+ *	must have decided whether to use management frame protection or not. 
+ *	Setting %NL80211_MFP_OPTIONAL with a %NL80211_CMD_CONNECT request will 
+ *	let the driver (or the firmware) decide whether to use MFP or not. 
+ * 
+ * @NL80211_ATTR_STA_FLAGS2: Attribute containing a 
+ *	&struct nl80211_sta_flag_update. 
+ * 
+ * @NL80211_ATTR_CONTROL_PORT: A flag indicating whether user space controls 
+ *	IEEE 802.1X port, i.e., sets/clears %NL80211_STA_FLAG_AUTHORIZED, in 
+ *	station mode. If the flag is included in %NL80211_CMD_ASSOCIATE 
+ *	request, the driver will assume that the port is unauthorized until 
+ *	authorized by user space. Otherwise, port is marked authorized by 
+ *	default in station mode. 
+ * @NL80211_ATTR_CONTROL_PORT_ETHERTYPE: A 16-bit value indicating the 
+ *	ethertype that will be used for key negotiation. It can be 
+ *	specified with the associate and connect commands. If it is not 
+ *	specified, the value defaults to 0x888E (PAE, 802.1X). This 
+ *	attribute is also used as a flag in the wiphy information to 
+ *	indicate that protocols other than PAE are supported. 
+ * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with 
+ *	%NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom 
+ *	ethertype frames used for key negotiation must not be encrypted. 
+ * @NL80211_ATTR_CONTROL_PORT_OVER_NL80211: A flag indicating whether control 
+ *	port frames (e.g. of type given in %NL80211_ATTR_CONTROL_PORT_ETHERTYPE) 
+ *	will be sent directly to the network interface or sent via the NL80211 
+ *	socket.  If this attribute is missing, then legacy behavior of sending 
+ *	control port frames directly to the network interface is used.  If the 
+ *	flag is included, then control port frames are sent over NL80211 instead 
+ *	using %CMD_CONTROL_PORT_FRAME.  If control port routing over NL80211 is 
+ *	to be used then userspace must also use the %NL80211_ATTR_SOCKET_OWNER 
+ *	flag. When used with %NL80211_ATTR_CONTROL_PORT_NO_PREAUTH, pre-auth 
+ *	frames are not forwared over the control port. 
+ * 
+ * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver. 
+ *	We recommend using nested, driver-specific attributes within this. 
+ * 
+ * @NL80211_ATTR_DISCONNECTED_BY_AP: A flag indicating that the DISCONNECT 
+ *	event was due to the AP disconnecting the station, and not due to 
+ *	a local disconnect request. 
+ * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT 
+ *	event (u16) 
+ * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating 
+ *	that protected APs should be used. This is also used with NEW_BEACON to 
+ *	indicate that the BSS is to use protection. 
+ * 
+ * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON 
+ *	to indicate which unicast key ciphers will be used with the connection 
+ *	(an array of u32). 
+ * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to 
+ *	indicate which group key cipher will be used with the connection (a 
+ *	u32). 
+ * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to 
+ *	indicate which WPA version(s) the AP we want to associate with is using 
+ *	(a u32 with flags from &enum nl80211_wpa_versions). 
+ * @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to 
+ *	indicate which key management algorithm(s) to use (an array of u32). 
+ *	This attribute is also sent in response to @NL80211_CMD_GET_WIPHY, 
+ *	indicating the supported AKM suites, intended for specific drivers which 
+ *	implement SME and have constraints on which AKMs are supported and also 
+ *	the cases where an AKM support is offloaded to the driver/firmware. 
+ *	If there is no such notification from the driver, user space should 
+ *	assume the driver supports all the AKM suites. 
+ * 
+ * @NL80211_ATTR_REQ_IE: (Re)association request information elements as 
+ *	sent out by the card, for ROAM and successful CONNECT events. 
+ * @NL80211_ATTR_RESP_IE: (Re)association response information elements as 
+ *	sent by peer, for ROAM and successful CONNECT events. 
+ * 
+ * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used in ASSOCIATE and CONNECT 
+ *	commands to specify a request to reassociate within an ESS, i.e., to use 
+ *	Reassociate Request frame (with the value of this attribute in the 
+ *	Current AP address field) instead of Association Request frame which is 
+ *	used for the initial association to an ESS. 
+ * 
+ * @NL80211_ATTR_KEY: key information in a nested attribute with 
+ *	%NL80211_KEY_* sub-attributes 
+ * @NL80211_ATTR_KEYS: array of keys for static WEP keys for connect() 
+ *	and join_ibss(), key information is in a nested attribute each 
+ *	with %NL80211_KEY_* sub-attributes 
+ * 
+ * @NL80211_ATTR_PID: Process ID of a network namespace. 
+ * 
+ * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for 
+ *	dumps. This number increases whenever the object list being 
+ *	dumped changes, and as such userspace can verify that it has 
+ *	obtained a complete and consistent snapshot by verifying that 
+ *	all dump messages contain the same generation number. If it 
+ *	changed then the list changed and the dump should be repeated 
+ *	completely from scratch. 
+ * 
+ * @NL80211_ATTR_4ADDR: Use 4-address frames on a virtual interface 
+ * 
+ * @NL80211_ATTR_SURVEY_INFO: survey information about a channel, part of 
+ *      the survey response for %NL80211_CMD_GET_SURVEY, nested attribute 
+ *      containing info as possible, see &enum survey_info. 
+ * 
+ * @NL80211_ATTR_PMKID: PMK material for PMKSA caching. 
+ * @NL80211_ATTR_MAX_NUM_PMKIDS: maximum number of PMKIDs a firmware can 
+ *	cache, a wiphy attribute. 
+ * 
+ * @NL80211_ATTR_DURATION: Duration of an operation in milliseconds, u32. 
+ * @NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION: Device attribute that 
+ *	specifies the maximum duration that can be requested with the 
+ *	remain-on-channel operation, in milliseconds, u32. 
+ * 
+ * @NL80211_ATTR_COOKIE: Generic 64-bit cookie to identify objects. 
+ * 
+ * @NL80211_ATTR_TX_RATES: Nested set of attributes 
+ *	(enum nl80211_tx_rate_attributes) describing TX rates per band. The 
+ *	enum nl80211_band value is used as the index (nla_type() of the nested 
+ *	data. If a band is not included, it will be configured to allow all 
+ *	rates based on negotiated supported rates information. This attribute 
+ *	is used with %NL80211_CMD_SET_TX_BITRATE_MASK and with starting AP, 
+ *	and joining mesh networks (not IBSS yet). In the later case, it must 
+ *	specify just a single bitrate, which is to be used for the beacon. 
+ *	The driver must also specify support for this with the extended 
+ *	features NL80211_EXT_FEATURE_BEACON_RATE_LEGACY, 
+ *	NL80211_EXT_FEATURE_BEACON_RATE_HT and 
+ *	NL80211_EXT_FEATURE_BEACON_RATE_VHT. 
+ * 
+ * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain 
+ *	at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME. 
+ * @NL80211_ATTR_FRAME_TYPE: A u16 indicating the frame type/subtype for the 
+ *	@NL80211_CMD_REGISTER_FRAME command. 
+ * @NL80211_ATTR_TX_FRAME_TYPES: wiphy capability attribute, which is a 
+ *	nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing 
+ *	information about which frame types can be transmitted with 
+ *	%NL80211_CMD_FRAME. 
+ * @NL80211_ATTR_RX_FRAME_TYPES: wiphy capability attribute, which is a 
+ *	nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing 
+ *	information about which frame types can be registered for RX. 
+ * 
+ * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was 
+ *	acknowledged by the recipient. 
+ * 
+ * @NL80211_ATTR_PS_STATE: powersave state, using &enum nl80211_ps_state values. 
+ * 
+ * @NL80211_ATTR_CQM: connection quality monitor configuration in a 
+ *	nested attribute with %NL80211_ATTR_CQM_* sub-attributes. 
+ * 
+ * @NL80211_ATTR_LOCAL_STATE_CHANGE: Flag attribute to indicate that a command 
+ *	is requesting a local authentication/association state change without 
+ *	invoking actual management frame exchange. This can be used with 
+ *	NL80211_CMD_AUTHENTICATE, NL80211_CMD_DEAUTHENTICATE, 
+ *	NL80211_CMD_DISASSOCIATE. 
+ * 
+ * @NL80211_ATTR_AP_ISOLATE: (AP mode) Do not forward traffic between stations 
+ *	connected to this BSS. 
+ * 
+ * @NL80211_ATTR_WIPHY_TX_POWER_SETTING: Transmit power setting type. See 
+ *      &enum nl80211_tx_power_setting for possible values. 
+ * @NL80211_ATTR_WIPHY_TX_POWER_LEVEL: Transmit power level in signed mBm units. 
+ *      This is used in association with @NL80211_ATTR_WIPHY_TX_POWER_SETTING 
+ *      for non-automatic settings. 
+ * 
+ * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly 
+ *	means support for per-station GTKs. 
+ * 
+ * @NL80211_ATTR_WIPHY_ANTENNA_TX: Bitmap of allowed antennas for transmitting. 
+ *	This can be used to mask out antennas which are not attached or should 
+ *	not be used for transmitting. If an antenna is not selected in this 
+ *	bitmap the hardware is not allowed to transmit on this antenna. 
+ * 
+ *	Each bit represents one antenna, starting with antenna 1 at the first 
+ *	bit. Depending on which antennas are selected in the bitmap, 802.11n 
+ *	drivers can derive which chainmasks to use (if all antennas belonging to 
+ *	a particular chain are disabled this chain should be disabled) and if 
+ *	a chain has diversity antennas wether diversity should be used or not. 
+ *	HT capabilities (STBC, TX Beamforming, Antenna selection) can be 
+ *	derived from the available chains after applying the antenna mask. 
+ *	Non-802.11n drivers can derive wether to use diversity or not. 
+ *	Drivers may reject configurations or RX/TX mask combinations they cannot 
+ *	support by returning -EINVAL. 
+ * 
+ * @NL80211_ATTR_WIPHY_ANTENNA_RX: Bitmap of allowed antennas for receiving. 
+ *	This can be used to mask out antennas which are not attached or should 
+ *	not be used for receiving. If an antenna is not selected in this bitmap 
+ *	the hardware should not be configured to receive on this antenna. 
+ *	For a more detailed description see @NL80211_ATTR_WIPHY_ANTENNA_TX. 
+ * 
+ * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX: Bitmap of antennas which are available 
+ *	for configuration as TX antennas via the above parameters. 
+ * 
+ * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX: Bitmap of antennas which are available 
+ *	for configuration as RX antennas via the above parameters. 
+ * 
+ * @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS 
+ * 
+ * @NL80211_ATTR_OFFCHANNEL_TX_OK: For management frame TX, the frame may be 
+ *	transmitted on another channel when the channel given doesn't match 
+ *	the current channel. If the current channel doesn't match and this 
+ *	flag isn't set, the frame will be rejected. This is also used as an 
+ *	nl80211 capability flag. 
+ * 
+ * @NL80211_ATTR_BSS_HT_OPMODE: HT operation mode (u16) 
+ * 
+ * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags 
+ *	attributes, specifying what a key should be set as default as. 
+ *	See &enum nl80211_key_default_types. 
+ * 
+ * @NL80211_ATTR_MESH_SETUP: Optional mesh setup parameters.  These cannot be 
+ *	changed once the mesh is active. 
+ * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute 
+ *	containing attributes from &enum nl80211_meshconf_params. 
+ * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver 
+ *	allows auth frames in a mesh to be passed to userspace for processing via 
+ *	the @NL80211_MESH_SETUP_USERSPACE_AUTH flag. 
+ * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as defined in 
+ *	&enum nl80211_plink_state. Used when userspace is driving the peer link 
+ *	management state machine.  @NL80211_MESH_SETUP_USERSPACE_AMPE or 
+ *	@NL80211_MESH_SETUP_USERSPACE_MPM must be enabled. 
+ * 
+ * @NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED: indicates, as part of the wiphy 
+ *	capabilities, the supported WoWLAN triggers 
+ * @NL80211_ATTR_WOWLAN_TRIGGERS: used by %NL80211_CMD_SET_WOWLAN to 
+ *	indicate which WoW triggers should be enabled. This is also 
+ *	used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN 
+ *	triggers. 
+ * 
+ * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan 
+ *	cycles, in msecs. 
+ * 
+ * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more 
+ *	sets of attributes to match during scheduled scans.  Only BSSs 
+ *	that match any of the sets will be reported.  These are 
+ *	pass-thru filter rules. 
+ *	For a match to succeed, the BSS must match all attributes of a 
+ *	set.  Since not every hardware supports matching all types of 
+ *	attributes, there is no guarantee that the reported BSSs are 
+ *	fully complying with the match sets and userspace needs to be 
+ *	able to ignore them by itself. 
+ *	Thus, the implementation is somewhat hardware-dependent, but 
+ *	this is only an optimization and the userspace application 
+ *	needs to handle all the non-filtered results anyway. 
+ *	If the match attributes don't make sense when combined with 
+ *	the values passed in @NL80211_ATTR_SCAN_SSIDS (eg. if an SSID 
+ *	is included in the probe request, but the match attributes 
+ *	will never let it go through), -EINVAL may be returned. 
+ *	If omitted, no filtering is done. 
+ * 
+ * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported 
+ *	interface combinations. In each nested item, it contains attributes 
+ *	defined in &enum nl80211_if_combination_attrs. 
+ * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like 
+ *	%NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that 
+ *	are managed in software: interfaces of these types aren't subject to 
+ *	any restrictions in their number or combinations. 
+ * 
+ * @NL80211_ATTR_REKEY_DATA: nested attribute containing the information 
+ *	necessary for GTK rekeying in the device, see &enum nl80211_rekey_data. 
+ * 
+ * @NL80211_ATTR_SCAN_SUPP_RATES: rates per to be advertised as supported in scan, 
+ *	nested array attribute containing an entry for each band, with the entry 
+ *	being a list of supported rates as defined by IEEE 802.11 7.3.2.2 but 
+ *	without the length restriction (at most %NL80211_MAX_SUPP_RATES). 
+ * 
+ * @NL80211_ATTR_HIDDEN_SSID: indicates whether SSID is to be hidden from Beacon 
+ *	and Probe Response (when response to wildcard Probe Request); see 
+ *	&enum nl80211_hidden_ssid, represented as a u32 
+ * 
+ * @NL80211_ATTR_IE_PROBE_RESP: Information element(s) for Probe Response frame. 
+ *	This is used with %NL80211_CMD_NEW_BEACON and %NL80211_CMD_SET_BEACON to 
+ *	provide extra IEs (e.g., WPS/P2P IE) into Probe Response frames when the 
+ *	driver (or firmware) replies to Probe Request frames. 
+ * @NL80211_ATTR_IE_ASSOC_RESP: Information element(s) for (Re)Association 
+ *	Response frames. This is used with %NL80211_CMD_NEW_BEACON and 
+ *	%NL80211_CMD_SET_BEACON to provide extra IEs (e.g., WPS/P2P IE) into 
+ *	(Re)Association Response frames when the driver (or firmware) replies to 
+ *	(Re)Association Request frames. 
+ * 
+ * @NL80211_ATTR_STA_WME: Nested attribute containing the wme configuration 
+ *	of the station, see &enum nl80211_sta_wme_attr. 
+ * @NL80211_ATTR_SUPPORT_AP_UAPSD: the device supports uapsd when working 
+ *	as AP. 
+ * 
+ * @NL80211_ATTR_ROAM_SUPPORT: Indicates whether the firmware is capable of 
+ *	roaming to another AP in the same ESS if the signal lever is low. 
+ * 
+ * @NL80211_ATTR_PMKSA_CANDIDATE: Nested attribute containing the PMKSA caching 
+ *	candidate information, see &enum nl80211_pmksa_candidate_attr. 
+ * 
+ * @NL80211_ATTR_TX_NO_CCK_RATE: Indicates whether to use CCK rate or not 
+ *	for management frames transmission. In order to avoid p2p probe/action 
+ *	frames are being transmitted at CCK rate in 2GHz band, the user space 
+ *	applications use this attribute. 
+ *	This attribute is used with %NL80211_CMD_TRIGGER_SCAN and 
+ *	%NL80211_CMD_FRAME commands. 
+ * 
+ * @NL80211_ATTR_TDLS_ACTION: Low level TDLS action code (e.g. link setup 
+ *	request, link setup confirm, link teardown, etc.). Values are 
+ *	described in the TDLS (802.11z) specification. 
+ * @NL80211_ATTR_TDLS_DIALOG_TOKEN: Non-zero token for uniquely identifying a 
+ *	TDLS conversation between two devices. 
+ * @NL80211_ATTR_TDLS_OPERATION: High level TDLS operation; see 
+ *	&enum nl80211_tdls_operation, represented as a u8. 
+ * @NL80211_ATTR_TDLS_SUPPORT: A flag indicating the device can operate 
+ *	as a TDLS peer sta. 
+ * @NL80211_ATTR_TDLS_EXTERNAL_SETUP: The TDLS discovery/setup and teardown 
+ *	procedures should be performed by sending TDLS packets via 
+ *	%NL80211_CMD_TDLS_MGMT. Otherwise %NL80211_CMD_TDLS_OPER should be 
+ *	used for asking the driver to perform a TDLS operation. 
+ * 
+ * @NL80211_ATTR_DEVICE_AP_SME: This u32 attribute may be listed for devices 
+ *	that have AP support to indicate that they have the AP SME integrated 
+ *	with support for the features listed in this attribute, see 
+ *	&enum nl80211_ap_sme_features. 
+ * 
+ * @NL80211_ATTR_DONT_WAIT_FOR_ACK: Used with %NL80211_CMD_FRAME, this tells 
+ *	the driver to not wait for an acknowledgement. Note that due to this, 
+ *	it will also not give a status callback nor return a cookie. This is 
+ *	mostly useful for probe responses to save airtime. 
+ * 
+ * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from 
+ *	&enum nl80211_feature_flags and is advertised in wiphy information. 
+ * @NL80211_ATTR_PROBE_RESP_OFFLOAD: Indicates that the HW responds to probe 
+ *	requests while operating in AP-mode. 
+ *	This attribute holds a bitmap of the supported protocols for 
+ *	offloading (see &enum nl80211_probe_resp_offload_support_attr). 
+ * 
+ * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire 
+ *	probe-response frame. The DA field in the 802.11 header is zero-ed out, 
+ *	to be filled by the FW. 
+ * @NL80211_ATTR_DISABLE_HT:  Force HT capable interfaces to disable 
+ *      this feature.  Currently, only supported in mac80211 drivers. 
+ * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the 
+ *      ATTR_HT_CAPABILITY to which attention should be paid. 
+ *      Currently, only mac80211 NICs support this feature. 
+ *      The values that may be configured are: 
+ *       MCS rates, MAX-AMSDU, HT-20-40 and HT_CAP_SGI_40 
+ *       AMPDU density and AMPDU factor. 
+ *      All values are treated as suggestions and may be ignored 
+ *      by the driver as required.  The actual values may be seen in 
+ *      the station debugfs ht_caps file. 
+ * 
+ * @NL80211_ATTR_DFS_REGION: region for regulatory rules which this country 
+ *    abides to when initiating radiation on DFS channels. A country maps 
+ *    to one DFS region. 
+ * 
+ * @NL80211_ATTR_NOACK_MAP: This u16 bitmap contains the No Ack Policy of 
+ *      up to 16 TIDs. 
+ * 
+ * @NL80211_ATTR_INACTIVITY_TIMEOUT: timeout value in seconds, this can be 
+ *	used by the drivers which has MLME in firmware and does not have support 
+ *	to report per station tx/rx activity to free up the station entry from 
+ *	the list. This needs to be used when the driver advertises the 
+ *	capability to timeout the stations. 
+ * 
+ * @NL80211_ATTR_RX_SIGNAL_DBM: signal strength in dBm (as a 32-bit int); 
+ *	this attribute is (depending on the driver capabilities) added to 
+ *	received frames indicated with %NL80211_CMD_FRAME. 
+ * 
+ * @NL80211_ATTR_BG_SCAN_PERIOD: Background scan period in seconds 
+ *      or 0 to disable background scan. 
+ * 
+ * @NL80211_ATTR_USER_REG_HINT_TYPE: type of regulatory hint passed from 
+ *	userspace. If unset it is assumed the hint comes directly from 
+ *	a user. If set code could specify exactly what type of source 
+ *	was used to provide the hint. For the different types of 
+ *	allowed user regulatory hints see nl80211_user_reg_hint_type. 
+ * 
+ * @NL80211_ATTR_CONN_FAILED_REASON: The reason for which AP has rejected 
+ *	the connection request from a station. nl80211_connect_failed_reason 
+ *	enum has different reasons of connection failure. 
+ * 
+ * @NL80211_ATTR_AUTH_DATA: Fields and elements in Authentication frames. 
+ *	This contains the authentication frame body (non-IE and IE data), 
+ *	excluding the Authentication algorithm number, i.e., starting at the 
+ *	Authentication transaction sequence number field. It is used with 
+ *	authentication algorithms that need special fields to be added into 
+ *	the frames (SAE and FILS). Currently, only the SAE cases use the 
+ *	initial two fields (Authentication transaction sequence number and 
+ *	Status code). However, those fields are included in the attribute data 
+ *	for all authentication algorithms to keep the attribute definition 
+ *	consistent. 
+ * 
+ * @NL80211_ATTR_VHT_CAPABILITY: VHT Capability information element (from 
+ *	association request when used with NL80211_CMD_NEW_STATION) 
+ * 
+ * @NL80211_ATTR_SCAN_FLAGS: scan request control flags (u32) 
+ * 
+ * @NL80211_ATTR_P2P_CTWINDOW: P2P GO Client Traffic Window (u8), used with 
+ *	the START_AP and SET_BSS commands 
+ * @NL80211_ATTR_P2P_OPPPS: P2P GO opportunistic PS (u8), used with the 
+ *	START_AP and SET_BSS commands. This can have the values 0 or 1; 
+ *	if not given in START_AP 0 is assumed, if not given in SET_BSS 
+ *	no change is made. 
+ * 
+ * @NL80211_ATTR_LOCAL_MESH_POWER_MODE: local mesh STA link-specific power mode 
+ *	defined in &enum nl80211_mesh_power_mode. 
+ * 
+ * @NL80211_ATTR_ACL_POLICY: ACL policy, see &enum nl80211_acl_policy, 
+ *	carried in a u32 attribute 
+ * 
+ * @NL80211_ATTR_MAC_ADDRS: Array of nested MAC addresses, used for 
+ *	MAC ACL. 
+ * 
+ * @NL80211_ATTR_MAC_ACL_MAX: u32 attribute to advertise the maximum 
+ *	number of MAC addresses that a device can support for MAC 
+ *	ACL. 
+ * 
+ * @NL80211_ATTR_RADAR_EVENT: Type of radar event for notification to userspace, 
+ *	contains a value of enum nl80211_radar_event (u32). 
+ * 
+ * @NL80211_ATTR_EXT_CAPA: 802.11 extended capabilities that the kernel driver 
+ *	has and handles. The format is the same as the IE contents. See 
+ *	802.11-2012 8.4.2.29 for more information. 
+ * @NL80211_ATTR_EXT_CAPA_MASK: Extended capabilities that the kernel driver 
+ *	has set in the %NL80211_ATTR_EXT_CAPA value, for multibit fields. 
+ * 
+ * @NL80211_ATTR_STA_CAPABILITY: Station capabilities (u16) are advertised to 
+ *	the driver, e.g., to enable TDLS power save (PU-APSD). 
+ * 
+ * @NL80211_ATTR_STA_EXT_CAPABILITY: Station extended capabilities are 
+ *	advertised to the driver, e.g., to enable TDLS off channel operations 
+ *	and PU-APSD. 
+ * 
+ * @NL80211_ATTR_PROTOCOL_FEATURES: global nl80211 feature flags, see 
+ *	&enum nl80211_protocol_features, the attribute is a u32. 
+ * 
+ * @NL80211_ATTR_SPLIT_WIPHY_DUMP: flag attribute, userspace supports 
+ *	receiving the data for a single wiphy split across multiple 
+ *	messages, given with wiphy dump message 
+ * 
+ * @NL80211_ATTR_MDID: Mobility Domain Identifier 
+ * 
+ * @NL80211_ATTR_IE_RIC: Resource Information Container Information 
+ *	Element 
+ * 
+ * @NL80211_ATTR_CRIT_PROT_ID: critical protocol identifier requiring increased 
+ *	reliability, see &enum nl80211_crit_proto_id (u16). 
+ * @NL80211_ATTR_MAX_CRIT_PROT_DURATION: duration in milliseconds in which 
+ *      the connection should have increased reliability (u16). 
+ * 
+ * @NL80211_ATTR_PEER_AID: Association ID for the peer TDLS station (u16). 
+ *	This is similar to @NL80211_ATTR_STA_AID but with a difference of being 
+ *	allowed to be used with the first @NL80211_CMD_SET_STATION command to 
+ *	update a TDLS peer STA entry. 
+ * 
+ * @NL80211_ATTR_COALESCE_RULE: Coalesce rule information. 
+ * 
+ * @NL80211_ATTR_CH_SWITCH_COUNT: u32 attribute specifying the number of TBTT's 
+ *	until the channel switch event. 
+ * @NL80211_ATTR_CH_SWITCH_BLOCK_TX: flag attribute specifying that transmission 
+ *	must be blocked on the current channel (before the channel switch 
+ *	operation). 
+ * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information 
+ *	for the time while performing a channel switch. 
+ * @NL80211_ATTR_CSA_C_OFF_BEACON: An array of offsets (u16) to the channel 
+ *	switch counters in the beacons tail (%NL80211_ATTR_BEACON_TAIL). 
+ * @NL80211_ATTR_CSA_C_OFF_PRESP: An array of offsets (u16) to the channel 
+ *	switch counters in the probe response (%NL80211_ATTR_PROBE_RESP). 
+ * 
+ * @NL80211_ATTR_RXMGMT_FLAGS: flags for nl80211_send_mgmt(), u32. 
+ *	As specified in the &enum nl80211_rxmgmt_flags. 
+ * 
+ * @NL80211_ATTR_STA_SUPPORTED_CHANNELS: array of supported channels. 
+ * 
+ * @NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES: array of supported 
+ *      supported operating classes. 
+ * 
+ * @NL80211_ATTR_HANDLE_DFS: A flag indicating whether user space 
+ *	controls DFS operation in IBSS mode. If the flag is included in 
+ *	%NL80211_CMD_JOIN_IBSS request, the driver will allow use of DFS 
+ *	channels and reports radar events to userspace. Userspace is required 
+ *	to react to radar events, e.g. initiate a channel switch or leave the 
+ *	IBSS network. 
+ * 
+ * @NL80211_ATTR_SUPPORT_5_MHZ: A flag indicating that the device supports 
+ *	5 MHz channel bandwidth. 
+ * @NL80211_ATTR_SUPPORT_10_MHZ: A flag indicating that the device supports 
+ *	10 MHz channel bandwidth. 
+ * 
+ * @NL80211_ATTR_OPMODE_NOTIF: Operating mode field from Operating Mode 
+ *	Notification Element based on association request when used with 
+ *	%NL80211_CMD_NEW_STATION or %NL80211_CMD_SET_STATION (only when 
+ *	%NL80211_FEATURE_FULL_AP_CLIENT_STATE is supported, or with TDLS); 
+ *	u8 attribute. 
+ * 
+ * @NL80211_ATTR_VENDOR_ID: The vendor ID, either a 24-bit OUI or, if 
+ *	%NL80211_VENDOR_ID_IS_LINUX is set, a special Linux ID (not used yet) 
+ * @NL80211_ATTR_VENDOR_SUBCMD: vendor sub-command 
+ * @NL80211_ATTR_VENDOR_DATA: data for the vendor command, if any; this 
+ *	attribute is also used for vendor command feature advertisement 
+ * @NL80211_ATTR_VENDOR_EVENTS: used for event list advertising in the wiphy 
+ *	info, containing a nested array of possible events 
+ * 
+ * @NL80211_ATTR_QOS_MAP: IP DSCP mapping for Interworking QoS mapping. This 
+ *	data is in the format defined for the payload of the QoS Map Set element 
+ *	in IEEE Std 802.11-2012, 8.4.2.97. 
+ * 
+ * @NL80211_ATTR_MAC_HINT: MAC address recommendation as initial BSS 
+ * @NL80211_ATTR_WIPHY_FREQ_HINT: frequency of the recommended initial BSS 
+ * 
+ * @NL80211_ATTR_MAX_AP_ASSOC_STA: Device attribute that indicates how many 
+ *	associated stations are supported in AP mode (including P2P GO); u32. 
+ *	Since drivers may not have a fixed limit on the maximum number (e.g., 
+ *	other concurrent operations may affect this), drivers are allowed to 
+ *	advertise values that cannot always be met. In such cases, an attempt 
+ *	to add a new station entry with @NL80211_CMD_NEW_STATION may fail. 
+ * 
+ * @NL80211_ATTR_CSA_C_OFFSETS_TX: An array of csa counter offsets (u16) which 
+ *	should be updated when the frame is transmitted. 
+ * @NL80211_ATTR_MAX_CSA_COUNTERS: U8 attribute used to advertise the maximum 
+ *	supported number of csa counters. 
+ * 
+ * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32. 
+ *	As specified in the &enum nl80211_tdls_peer_capability. 
+ * 
+ * @NL80211_ATTR_SOCKET_OWNER: Flag attribute, if set during interface 
+ *	creation then the new interface will be owned by the netlink socket 
+ *	that created it and will be destroyed when the socket is closed. 
+ *	If set during scheduled scan start then the new scan req will be 
+ *	owned by the netlink socket that created it and the scheduled scan will 
+ *	be stopped when the socket is closed. 
+ *	If set during configuration of regulatory indoor operation then the 
+ *	regulatory indoor configuration would be owned by the netlink socket 
+ *	that configured the indoor setting, and the indoor operation would be 
+ *	cleared when the socket is closed. 
+ *	If set during NAN interface creation, the interface will be destroyed 
+ *	if the socket is closed just like any other interface. Moreover, NAN 
+ *	notifications will be sent in unicast to that socket. Without this 
+ *	attribute, the notifications will be sent to the %NL80211_MCGRP_NAN 
+ *	multicast group. 
+ *	If set during %NL80211_CMD_ASSOCIATE or %NL80211_CMD_CONNECT the 
+ *	station will deauthenticate when the socket is closed. 
+ *	If set during %NL80211_CMD_JOIN_IBSS the IBSS will be automatically 
+ *	torn down when the socket is closed. 
+ *	If set during %NL80211_CMD_JOIN_MESH the mesh setup will be 
+ *	automatically torn down when the socket is closed. 
+ *	If set during %NL80211_CMD_START_AP the AP will be automatically 
+ *	disabled when the socket is closed. 
+ * 
+ * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is 
+ *	the TDLS link initiator. 
+ * 
+ * @NL80211_ATTR_USE_RRM: flag for indicating whether the current connection 
+ *	shall support Radio Resource Measurements (11k). This attribute can be 
+ *	used with %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests. 
+ *	User space applications are expected to use this flag only if the 
+ *	underlying device supports these minimal RRM features: 
+ *		%NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES, 
+ *		%NL80211_FEATURE_QUIET, 
+ *	Or, if global RRM is supported, see: 
+ *		%NL80211_EXT_FEATURE_RRM 
+ *	If this flag is used, driver must add the Power Capabilities IE to the 
+ *	association request. In addition, it must also set the RRM capability 
+ *	flag in the association request's Capability Info field. 
+ * 
+ * @NL80211_ATTR_WIPHY_DYN_ACK: flag attribute used to enable ACK timeout 
+ *	estimation algorithm (dynack). In order to activate dynack 
+ *	%NL80211_FEATURE_ACKTO_ESTIMATION feature flag must be set by lower 
+ *	drivers to indicate dynack capability. Dynack is automatically disabled 
+ *	setting valid value for coverage class. 
+ * 
+ * @NL80211_ATTR_TSID: a TSID value (u8 attribute) 
+ * @NL80211_ATTR_USER_PRIO: user priority value (u8 attribute) 
+ * @NL80211_ATTR_ADMITTED_TIME: admitted time in units of 32 microseconds 
+ *	(per second) (u16 attribute) 
+ * 
+ * @NL80211_ATTR_SMPS_MODE: SMPS mode to use (ap mode). see 
+ *	&enum nl80211_smps_mode. 
+ * 
+ * @NL80211_ATTR_OPER_CLASS: operating class 
+ * 
+ * @NL80211_ATTR_MAC_MASK: MAC address mask 
+ * 
+ * @NL80211_ATTR_WIPHY_SELF_MANAGED_REG: flag attribute indicating this device 
+ *	is self-managing its regulatory information and any regulatory domain 
+ *	obtained from it is coming from the device's wiphy and not the global 
+ *	cfg80211 regdomain. 
+ * 
+ * @NL80211_ATTR_EXT_FEATURES: extended feature flags contained in a byte 
+ *	array. The feature flags are identified by their bit index (see &enum 
+ *	nl80211_ext_feature_index). The bit index is ordered starting at the 
+ *	least-significant bit of the first byte in the array, ie. bit index 0 
+ *	is located at bit 0 of byte 0. bit index 25 would be located at bit 1 
+ *	of byte 3 (u8 array). 
+ * 
+ * @NL80211_ATTR_SURVEY_RADIO_STATS: Request overall radio statistics to be 
+ *	returned along with other survey data. If set, @NL80211_CMD_GET_SURVEY 
+ *	may return a survey entry without a channel indicating global radio 
+ *	statistics (only some values are valid and make sense.) 
+ *	For devices that don't return such an entry even then, the information 
+ *	should be contained in the result as the sum of the respective counters 
+ *	over all channels. 
+ * 
+ * @NL80211_ATTR_SCHED_SCAN_DELAY: delay before the first cycle of a 
+ *	scheduled scan is started.  Or the delay before a WoWLAN 
+ *	net-detect scan is started, counting from the moment the 
+ *	system is suspended.  This value is a u32, in seconds. 
+ 
+ * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device 
+ *      is operating in an indoor environment. 
+ * 
+ * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS: maximum number of scan plans for 
+ *	scheduled scan supported by the device (u32), a wiphy attribute. 
+ * @NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL: maximum interval (in seconds) for 
+ *	a scan plan (u32), a wiphy attribute. 
+ * @NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS: maximum number of iterations in 
+ *	a scan plan (u32), a wiphy attribute. 
+ * @NL80211_ATTR_SCHED_SCAN_PLANS: a list of scan plans for scheduled scan. 
+ *	Each scan plan defines the number of scan iterations and the interval 
+ *	between scans. The last scan plan will always run infinitely, 
+ *	thus it must not specify the number of iterations, only the interval 
+ *	between scans. The scan plans are executed sequentially. 
+ *	Each scan plan is a nested attribute of &enum nl80211_sched_scan_plan. 
+ * @NL80211_ATTR_PBSS: flag attribute. If set it means operate 
+ *	in a PBSS. Specified in %NL80211_CMD_CONNECT to request 
+ *	connecting to a PCP, and in %NL80211_CMD_START_AP to start 
+ *	a PCP instead of AP. Relevant for DMG networks only. 
+ * @NL80211_ATTR_BSS_SELECT: nested attribute for driver supporting the 
+ *	BSS selection feature. When used with %NL80211_CMD_GET_WIPHY it contains 
+ *	attributes according &enum nl80211_bss_select_attr to indicate what 
+ *	BSS selection behaviours are supported. When used with %NL80211_CMD_CONNECT 
+ *	it contains the behaviour-specific attribute containing the parameters for 
+ *	BSS selection to be done by driver and/or firmware. 
+ * 
+ * @NL80211_ATTR_STA_SUPPORT_P2P_PS: whether P2P PS mechanism supported 
+ *	or not. u8, one of the values of &enum nl80211_sta_p2p_ps_status 
+ * 
+ * @NL80211_ATTR_PAD: attribute used for padding for 64-bit alignment 
+ * 
+ * @NL80211_ATTR_IFTYPE_EXT_CAPA: Nested attribute of the following attributes: 
+ *	%NL80211_ATTR_IFTYPE, %NL80211_ATTR_EXT_CAPA, 
+ *	%NL80211_ATTR_EXT_CAPA_MASK, to specify the extended capabilities per 
+ *	interface type. 
+ * 
+ * @NL80211_ATTR_MU_MIMO_GROUP_DATA: array of 24 bytes that defines a MU-MIMO 
+ *	groupID for monitor mode. 
+ *	The first 8 bytes are a mask that defines the membership in each 
+ *	group (there are 64 groups, group 0 and 63 are reserved), 
+ *	each bit represents a group and set to 1 for being a member in 
+ *	that group and 0 for not being a member. 
+ *	The remaining 16 bytes define the position in each group: 2 bits for 
+ *	each group. 
+ *	(smaller group numbers represented on most significant bits and bigger 
+ *	group numbers on least significant bits.) 
+ *	This attribute is used only if all interfaces are in monitor mode. 
+ *	Set this attribute in order to monitor packets using the given MU-MIMO 
+ *	groupID data. 
+ *	to turn off that feature set all the bits of the groupID to zero. 
+ * @NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR: mac address for the sniffer to follow 
+ *	when using MU-MIMO air sniffer. 
+ *	to turn that feature off set an invalid mac address 
+ *	(e.g. FF:FF:FF:FF:FF:FF) 
+ * 
+ * @NL80211_ATTR_SCAN_START_TIME_TSF: The time at which the scan was actually 
+ *	started (u64). The time is the TSF of the BSS the interface that 
+ *	requested the scan is connected to (if available, otherwise this 
+ *	attribute must not be included). 
+ * @NL80211_ATTR_SCAN_START_TIME_TSF_BSSID: The BSS according to which 
+ *	%NL80211_ATTR_SCAN_START_TIME_TSF is set. 
+ * @NL80211_ATTR_MEASUREMENT_DURATION: measurement duration in TUs (u16). If 
+ *	%NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY is not set, this is the 
+ *	maximum measurement duration allowed. This attribute is used with 
+ *	measurement requests. It can also be used with %NL80211_CMD_TRIGGER_SCAN 
+ *	if the scan is used for beacon report radio measurement. 
+ * @NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY: flag attribute that indicates 
+ *	that the duration specified with %NL80211_ATTR_MEASUREMENT_DURATION is 
+ *	mandatory. If this flag is not set, the duration is the maximum duration 
+ *	and the actual measurement duration may be shorter. 
+ * 
+ * @NL80211_ATTR_MESH_PEER_AID: Association ID for the mesh peer (u16). This is 
+ *	used to pull the stored data for mesh peer in power save state. 
+ * 
+ * @NL80211_ATTR_NAN_MASTER_PREF: the master preference to be used by 
+ *	%NL80211_CMD_START_NAN and optionally with 
+ *	%NL80211_CMD_CHANGE_NAN_CONFIG. Its type is u8 and it can't be 0. 
+ *	Also, values 1 and 255 are reserved for certification purposes and 
+ *	should not be used during a normal device operation. 
+ * @NL80211_ATTR_BANDS: operating bands configuration.  This is a u32 
+ *	bitmask of BIT(NL80211_BAND_*) as described in %enum 
+ *	nl80211_band.  For instance, for NL80211_BAND_2GHZ, bit 0 
+ *	would be set.  This attribute is used with 
+ *	%NL80211_CMD_START_NAN and %NL80211_CMD_CHANGE_NAN_CONFIG, and 
+ *	it is optional.  If no bands are set, it means don't-care and 
+ *	the device will decide what to use. 
+ * @NL80211_ATTR_NAN_FUNC: a function that can be added to NAN. See 
+ *	&enum nl80211_nan_func_attributes for description of this nested 
+ *	attribute. 
+ * @NL80211_ATTR_NAN_MATCH: used to report a match. This is a nested attribute. 
+ *	See &enum nl80211_nan_match_attributes. 
+ * @NL80211_ATTR_FILS_KEK: KEK for FILS (Re)Association Request/Response frame 
+ *	protection. 
+ * @NL80211_ATTR_FILS_NONCES: Nonces (part of AAD) for FILS (Re)Association 
+ *	Request/Response frame protection. This attribute contains the 16 octet 
+ *	STA Nonce followed by 16 octets of AP Nonce. 
+ * 
+ * @NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED: Indicates whether or not multicast 
+ *	packets should be send out as unicast to all stations (flag attribute). 
+ * 
+ * @NL80211_ATTR_BSSID: The BSSID of the AP. Note that %NL80211_ATTR_MAC is also 
+ *	used in various commands/events for specifying the BSSID. 
+ * 
+ * @NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI: Relative RSSI threshold by which 
+ *	other BSSs has to be better or slightly worse than the current 
+ *	connected BSS so that they get reported to user space. 
+ *	This will give an opportunity to userspace to consider connecting to 
+ *	other matching BSSs which have better or slightly worse RSSI than 
+ *	the current connected BSS by using an offloaded operation to avoid 
+ *	unnecessary wakeups. 
+ * 
+ * @NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST: When present the RSSI level for BSSs in 
+ *	the specified band is to be adjusted before doing 
+ *	%NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI based comparison to figure out 
+ *	better BSSs. The attribute value is a packed structure 
+ *	value as specified by &struct nl80211_bss_select_rssi_adjust. 
+ * 
+ * @NL80211_ATTR_TIMEOUT_REASON: The reason for which an operation timed out. 
+ *	u32 attribute with an &enum nl80211_timeout_reason value. This is used, 
+ *	e.g., with %NL80211_CMD_CONNECT event. 
+ * 
+ * @NL80211_ATTR_FILS_ERP_USERNAME: EAP Re-authentication Protocol (ERP) 
+ *	username part of NAI used to refer keys rRK and rIK. This is used with 
+ *	%NL80211_CMD_CONNECT. 
+ * 
+ * @NL80211_ATTR_FILS_ERP_REALM: EAP Re-authentication Protocol (ERP) realm part 
+ *	of NAI specifying the domain name of the ER server. This is used with 
+ *	%NL80211_CMD_CONNECT. 
+ * 
+ * @NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM: Unsigned 16-bit ERP next sequence number 
+ *	to use in ERP messages. This is used in generating the FILS wrapped data 
+ *	for FILS authentication and is used with %NL80211_CMD_CONNECT. 
+ * 
+ * @NL80211_ATTR_FILS_ERP_RRK: ERP re-authentication Root Key (rRK) for the 
+ *	NAI specified by %NL80211_ATTR_FILS_ERP_USERNAME and 
+ *	%NL80211_ATTR_FILS_ERP_REALM. This is used for generating rIK and rMSK 
+ *	from successful FILS authentication and is used with 
+ *	%NL80211_CMD_CONNECT. 
+ * 
+ * @NL80211_ATTR_FILS_CACHE_ID: A 2-octet identifier advertized by a FILS AP 
+ *	identifying the scope of PMKSAs. This is used with 
+ *	@NL80211_CMD_SET_PMKSA and @NL80211_CMD_DEL_PMKSA. 
+ * 
+ * @NL80211_ATTR_PMK: attribute for passing PMK key material. Used with 
+ *	%NL80211_CMD_SET_PMKSA for the PMKSA identified by %NL80211_ATTR_PMKID. 
+ *	For %NL80211_CMD_CONNECT it is used to provide PSK for offloading 4-way 
+ *	handshake for WPA/WPA2-PSK networks. For 802.1X authentication it is 
+ *	used with %NL80211_CMD_SET_PMK. For offloaded FT support this attribute 
+ *	specifies the PMK-R0 if NL80211_ATTR_PMKR0_NAME is included as well. 
+ * 
+ * @NL80211_ATTR_SCHED_SCAN_MULTI: flag attribute which user-space shall use to 
+ *	indicate that it supports multiple active scheduled scan requests. 
+ * @NL80211_ATTR_SCHED_SCAN_MAX_REQS: indicates maximum number of scheduled 
+ *	scan request that may be active for the device (u32). 
+ * 
+ * @NL80211_ATTR_WANT_1X_4WAY_HS: flag attribute which user-space can include 
+ *	in %NL80211_CMD_CONNECT to indicate that for 802.1X authentication it 
+ *	wants to use the supported offload of the 4-way handshake. 
+ * @NL80211_ATTR_PMKR0_NAME: PMK-R0 Name for offloaded FT. 
+ * @NL80211_ATTR_PORT_AUTHORIZED: (reserved) 
+ * 
+ * @NL80211_ATTR_EXTERNAL_AUTH_ACTION: Identify the requested external 
+ *     authentication operation (u32 attribute with an 
+ *     &enum nl80211_external_auth_action value). This is used with the 
+ *     %NL80211_CMD_EXTERNAL_AUTH request event. 
+ * @NL80211_ATTR_EXTERNAL_AUTH_SUPPORT: Flag attribute indicating that the user 
+ *	space supports external authentication. This attribute shall be used 
+ *	with %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP request. The driver 
+ *	may offload authentication processing to user space if this capability 
+ *	is indicated in the respective requests from the user space. 
+ * 
+ * @NL80211_ATTR_NSS: Station's New/updated  RX_NSS value notified using this 
+ *	u8 attribute. This is used with %NL80211_CMD_STA_OPMODE_CHANGED. 
+ * 
+ * @NL80211_ATTR_TXQ_STATS: TXQ statistics (nested attribute, see &enum 
+ *      nl80211_txq_stats) 
+ * @NL80211_ATTR_TXQ_LIMIT: Total packet limit for the TXQ queues for this phy. 
+ *      The smaller of this and the memory limit is enforced. 
+ * @NL80211_ATTR_TXQ_MEMORY_LIMIT: Total memory memory limit (in bytes) for the 
+ *      TXQ queues for this phy. The smaller of this and the packet limit is 
+ *      enforced. 
+ * @NL80211_ATTR_TXQ_QUANTUM: TXQ scheduler quantum (bytes). Number of bytes 
+ *      a flow is assigned on each round of the DRR scheduler. 
+ * @NL80211_ATTR_HE_CAPABILITY: HE Capability information element (from 
+ *	association request when used with NL80211_CMD_NEW_STATION). Can be set 
+ *	only if %NL80211_STA_FLAG_WME is set. 
+ * 
+ * @NL80211_ATTR_FTM_RESPONDER: nested attribute which user-space can include 
+ *	in %NL80211_CMD_START_AP or %NL80211_CMD_SET_BEACON for fine timing 
+ *	measurement (FTM) responder functionality and containing parameters as 
+ *	possible, see &enum nl80211_ftm_responder_attr 
+ * 
+ * @NL80211_ATTR_FTM_RESPONDER_STATS: Nested attribute with FTM responder 
+ *	statistics, see &enum nl80211_ftm_responder_stats. 
+ * 
+ * @NL80211_ATTR_TIMEOUT: Timeout for the given operation in milliseconds (u32), 
+ *	if the attribute is not given no timeout is requested. Note that 0 is an 
+ *	invalid value. 
+ * 
+ * @NL80211_ATTR_PEER_MEASUREMENTS: peer measurements request (and result) 
+ *	data, uses nested attributes specified in 
+ *	&enum nl80211_peer_measurement_attrs. 
+ *	This is also used for capability advertisement in the wiphy information, 
+ *	with the appropriate sub-attributes. 
+ * 
+ * @NL80211_ATTR_AIRTIME_WEIGHT: Station's weight when scheduled by the airtime 
+ *	scheduler. 
+ * 
+ * @NL80211_ATTR_STA_TX_POWER_SETTING: Transmit power setting type (u8) for 
+ *	station associated with the AP. See &enum nl80211_tx_power_setting for 
+ *	possible values. 
+ * @NL80211_ATTR_STA_TX_POWER: Transmit power level (s16) in dBm units. This 
+ *	allows to set Tx power for a station. If this attribute is not included, 
+ *	the default per-interface tx power setting will be overriding. Driver 
+ *	should be picking up the lowest tx power, either tx power per-interface 
+ *	or per-station. 
+ * 
+ * @NL80211_ATTR_SAE_PASSWORD: attribute for passing SAE password material. It 
+ *	is used with %NL80211_CMD_CONNECT to provide password for offloading 
+ *	SAE authentication for WPA3-Personal networks. 
+ * 
+ * @NL80211_ATTR_TWT_RESPONDER: Enable target wait time responder support. 
+ * 
+ * @NL80211_ATTR_HE_OBSS_PD: nested attribute for OBSS Packet Detection 
+ *	functionality. 
+ * 
+ * @NL80211_ATTR_WIPHY_EDMG_CHANNELS: bitmap that indicates the 2.16 GHz 
+ *	channel(s) that are allowed to be used for EDMG transmissions. 
+ *	Defined by IEEE P802.11ay/D4.0 section 9.4.2.251. (u8 attribute) 
+ * @NL80211_ATTR_WIPHY_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes 
+ *	the allowed channel bandwidth configurations. (u8 attribute) 
+ *	Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13. 
+ * 
+ * @NL80211_ATTR_VLAN_ID: VLAN ID (1..4094) for the station and VLAN group key 
+ *	(u16). 
+ * 
+ * @NL80211_ATTR_HE_BSS_COLOR: nested attribute for BSS Color Settings. 
+ * 
+ * @NL80211_ATTR_IFTYPE_AKM_SUITES: nested array attribute, with each entry 
+ *	using attributes from &enum nl80211_iftype_akm_attributes. This 
+ *	attribute is sent in a response to %NL80211_CMD_GET_WIPHY indicating 
+ *	supported AKM suites capability per interface. AKMs advertised in 
+ *	%NL80211_ATTR_AKM_SUITES are default capabilities if AKM suites not 
+ *	advertised for a specific interface type. 
+ * 
+ * @NL80211_ATTR_TID_CONFIG: TID specific configuration in a 
+ *	nested attribute with &enum nl80211_tid_config_attr sub-attributes; 
+ *	on output (in wiphy attributes) it contains only the feature sub- 
+ *	attributes. 
+ * 
+ * @NL80211_ATTR_CONTROL_PORT_NO_PREAUTH: disable preauth frame rx on control 
+ *	port in order to forward/receive them as ordinary data frames. 
+ * 
+ * @NL80211_ATTR_PMK_LIFETIME: Maximum lifetime for PMKSA in seconds (u32, 
+ *	dot11RSNAConfigPMKReauthThreshold; 0 is not a valid value). 
+ *	An optional parameter configured through %NL80211_CMD_SET_PMKSA. 
+ *	Drivers that trigger roaming need to know the lifetime of the 
+ *	configured PMKSA for triggering the full vs. PMKSA caching based 
+ *	authentication. This timeout helps authentication methods like SAE, 
+ *	where PMK gets updated only by going through a full (new SAE) 
+ *	authentication instead of getting updated during an association for EAP 
+ *	authentication. No new full authentication within the PMK expiry shall 
+ *	result in a disassociation at the end of the lifetime. 
+ * 
+ * @NL80211_ATTR_PMK_REAUTH_THRESHOLD: Reauthentication threshold time, in 
+ *	terms of percentage of %NL80211_ATTR_PMK_LIFETIME 
+ *	(u8, dot11RSNAConfigPMKReauthThreshold, 1..100). This is an optional 
+ *	parameter configured through %NL80211_CMD_SET_PMKSA. Requests the 
+ *	driver to trigger a full authentication roam (without PMKSA caching) 
+ *	after the reauthentication threshold time, but before the PMK lifetime 
+ *	has expired. 
+ * 
+ *	Authentication methods like SAE need to be able to generate a new PMKSA 
+ *	entry without having to force a disconnection after the PMK timeout. If 
+ *	no roaming occurs between the reauth threshold and PMK expiration, 
+ *	disassociation is still forced. 
+ * 
+ * @NUM_NL80211_ATTR: total number of nl80211_attrs available 
+ * @NL80211_ATTR_MAX: highest attribute number currently defined 
+ * @__NL80211_ATTR_AFTER_LAST: internal use 
+ */ 
+enum nl80211_attrs { 
+/* don't change the order or add anything between, this is ABI! */ 
+	NL80211_ATTR_UNSPEC, 
+ 
+	NL80211_ATTR_WIPHY, 
+	NL80211_ATTR_WIPHY_NAME, 
+ 
+	NL80211_ATTR_IFINDEX, 
+	NL80211_ATTR_IFNAME, 
+	NL80211_ATTR_IFTYPE, 
+ 
+	NL80211_ATTR_MAC, 
+ 
+	NL80211_ATTR_KEY_DATA, 
+	NL80211_ATTR_KEY_IDX, 
+	NL80211_ATTR_KEY_CIPHER, 
+	NL80211_ATTR_KEY_SEQ, 
+	NL80211_ATTR_KEY_DEFAULT, 
+ 
+	NL80211_ATTR_BEACON_INTERVAL, 
+	NL80211_ATTR_DTIM_PERIOD, 
+	NL80211_ATTR_BEACON_HEAD, 
+	NL80211_ATTR_BEACON_TAIL, 
+ 
+	NL80211_ATTR_STA_AID, 
+	NL80211_ATTR_STA_FLAGS, 
+	NL80211_ATTR_STA_LISTEN_INTERVAL, 
+	NL80211_ATTR_STA_SUPPORTED_RATES, 
+	NL80211_ATTR_STA_VLAN, 
+	NL80211_ATTR_STA_INFO, 
+ 
+	NL80211_ATTR_WIPHY_BANDS, 
+ 
+	NL80211_ATTR_MNTR_FLAGS, 
+ 
+	NL80211_ATTR_MESH_ID, 
+	NL80211_ATTR_STA_PLINK_ACTION, 
+	NL80211_ATTR_MPATH_NEXT_HOP, 
+	NL80211_ATTR_MPATH_INFO, 
+ 
+	NL80211_ATTR_BSS_CTS_PROT, 
+	NL80211_ATTR_BSS_SHORT_PREAMBLE, 
+	NL80211_ATTR_BSS_SHORT_SLOT_TIME, 
+ 
+	NL80211_ATTR_HT_CAPABILITY, 
+ 
+	NL80211_ATTR_SUPPORTED_IFTYPES, 
+ 
+	NL80211_ATTR_REG_ALPHA2, 
+	NL80211_ATTR_REG_RULES, 
+ 
+	NL80211_ATTR_MESH_CONFIG, 
+ 
+	NL80211_ATTR_BSS_BASIC_RATES, 
+ 
+	NL80211_ATTR_WIPHY_TXQ_PARAMS, 
+	NL80211_ATTR_WIPHY_FREQ, 
+	NL80211_ATTR_WIPHY_CHANNEL_TYPE, 
+ 
+	NL80211_ATTR_KEY_DEFAULT_MGMT, 
+ 
+	NL80211_ATTR_MGMT_SUBTYPE, 
+	NL80211_ATTR_IE, 
+ 
+	NL80211_ATTR_MAX_NUM_SCAN_SSIDS, 
+ 
+	NL80211_ATTR_SCAN_FREQUENCIES, 
+	NL80211_ATTR_SCAN_SSIDS, 
+	NL80211_ATTR_GENERATION, /* replaces old SCAN_GENERATION */ 
+	NL80211_ATTR_BSS, 
+ 
+	NL80211_ATTR_REG_INITIATOR, 
+	NL80211_ATTR_REG_TYPE, 
+ 
+	NL80211_ATTR_SUPPORTED_COMMANDS, 
+ 
+	NL80211_ATTR_FRAME, 
+	NL80211_ATTR_SSID, 
+	NL80211_ATTR_AUTH_TYPE, 
+	NL80211_ATTR_REASON_CODE, 
+ 
+	NL80211_ATTR_KEY_TYPE, 
+ 
+	NL80211_ATTR_MAX_SCAN_IE_LEN, 
+	NL80211_ATTR_CIPHER_SUITES, 
+ 
+	NL80211_ATTR_FREQ_BEFORE, 
+	NL80211_ATTR_FREQ_AFTER, 
+ 
+	NL80211_ATTR_FREQ_FIXED, 
+ 
+ 
+	NL80211_ATTR_WIPHY_RETRY_SHORT, 
+	NL80211_ATTR_WIPHY_RETRY_LONG, 
+	NL80211_ATTR_WIPHY_FRAG_THRESHOLD, 
+	NL80211_ATTR_WIPHY_RTS_THRESHOLD, 
+ 
+	NL80211_ATTR_TIMED_OUT, 
+ 
+	NL80211_ATTR_USE_MFP, 
+ 
+	NL80211_ATTR_STA_FLAGS2, 
+ 
+	NL80211_ATTR_CONTROL_PORT, 
+ 
+	NL80211_ATTR_TESTDATA, 
+ 
+	NL80211_ATTR_PRIVACY, 
+ 
+	NL80211_ATTR_DISCONNECTED_BY_AP, 
+	NL80211_ATTR_STATUS_CODE, 
+ 
+	NL80211_ATTR_CIPHER_SUITES_PAIRWISE, 
+	NL80211_ATTR_CIPHER_SUITE_GROUP, 
+	NL80211_ATTR_WPA_VERSIONS, 
+	NL80211_ATTR_AKM_SUITES, 
+ 
+	NL80211_ATTR_REQ_IE, 
+	NL80211_ATTR_RESP_IE, 
+ 
+	NL80211_ATTR_PREV_BSSID, 
+ 
+	NL80211_ATTR_KEY, 
+	NL80211_ATTR_KEYS, 
+ 
+	NL80211_ATTR_PID, 
+ 
+	NL80211_ATTR_4ADDR, 
+ 
+	NL80211_ATTR_SURVEY_INFO, 
+ 
+	NL80211_ATTR_PMKID, 
+	NL80211_ATTR_MAX_NUM_PMKIDS, 
+ 
+	NL80211_ATTR_DURATION, 
+ 
+	NL80211_ATTR_COOKIE, 
+ 
+	NL80211_ATTR_WIPHY_COVERAGE_CLASS, 
+ 
+	NL80211_ATTR_TX_RATES, 
+ 
+	NL80211_ATTR_FRAME_MATCH, 
+ 
+	NL80211_ATTR_ACK, 
+ 
+	NL80211_ATTR_PS_STATE, 
+ 
+	NL80211_ATTR_CQM, 
+ 
+	NL80211_ATTR_LOCAL_STATE_CHANGE, 
+ 
+	NL80211_ATTR_AP_ISOLATE, 
+ 
+	NL80211_ATTR_WIPHY_TX_POWER_SETTING, 
+	NL80211_ATTR_WIPHY_TX_POWER_LEVEL, 
+ 
+	NL80211_ATTR_TX_FRAME_TYPES, 
+	NL80211_ATTR_RX_FRAME_TYPES, 
+	NL80211_ATTR_FRAME_TYPE, 
+ 
+	NL80211_ATTR_CONTROL_PORT_ETHERTYPE, 
+	NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, 
+ 
+	NL80211_ATTR_SUPPORT_IBSS_RSN, 
+ 
+	NL80211_ATTR_WIPHY_ANTENNA_TX, 
+	NL80211_ATTR_WIPHY_ANTENNA_RX, 
+ 
+	NL80211_ATTR_MCAST_RATE, 
+ 
+	NL80211_ATTR_OFFCHANNEL_TX_OK, 
+ 
+	NL80211_ATTR_BSS_HT_OPMODE, 
+ 
+	NL80211_ATTR_KEY_DEFAULT_TYPES, 
+ 
+	NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION, 
+ 
+	NL80211_ATTR_MESH_SETUP, 
+ 
+	NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX, 
+	NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX, 
+ 
+	NL80211_ATTR_SUPPORT_MESH_AUTH, 
+	NL80211_ATTR_STA_PLINK_STATE, 
+ 
+	NL80211_ATTR_WOWLAN_TRIGGERS, 
+	NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, 
+ 
+	NL80211_ATTR_SCHED_SCAN_INTERVAL, 
+ 
+	NL80211_ATTR_INTERFACE_COMBINATIONS, 
+	NL80211_ATTR_SOFTWARE_IFTYPES, 
+ 
+	NL80211_ATTR_REKEY_DATA, 
+ 
+	NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS, 
+	NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN, 
+ 
+	NL80211_ATTR_SCAN_SUPP_RATES, 
+ 
+	NL80211_ATTR_HIDDEN_SSID, 
+ 
+	NL80211_ATTR_IE_PROBE_RESP, 
+	NL80211_ATTR_IE_ASSOC_RESP, 
+ 
+	NL80211_ATTR_STA_WME, 
+	NL80211_ATTR_SUPPORT_AP_UAPSD, 
+ 
+	NL80211_ATTR_ROAM_SUPPORT, 
+ 
+	NL80211_ATTR_SCHED_SCAN_MATCH, 
+	NL80211_ATTR_MAX_MATCH_SETS, 
+ 
+	NL80211_ATTR_PMKSA_CANDIDATE, 
+ 
+	NL80211_ATTR_TX_NO_CCK_RATE, 
+ 
+	NL80211_ATTR_TDLS_ACTION, 
+	NL80211_ATTR_TDLS_DIALOG_TOKEN, 
+	NL80211_ATTR_TDLS_OPERATION, 
+	NL80211_ATTR_TDLS_SUPPORT, 
+	NL80211_ATTR_TDLS_EXTERNAL_SETUP, 
+ 
+	NL80211_ATTR_DEVICE_AP_SME, 
+ 
+	NL80211_ATTR_DONT_WAIT_FOR_ACK, 
+ 
+	NL80211_ATTR_FEATURE_FLAGS, 
+ 
+	NL80211_ATTR_PROBE_RESP_OFFLOAD, 
+ 
+	NL80211_ATTR_PROBE_RESP, 
+ 
+	NL80211_ATTR_DFS_REGION, 
+ 
+	NL80211_ATTR_DISABLE_HT, 
+	NL80211_ATTR_HT_CAPABILITY_MASK, 
+ 
+	NL80211_ATTR_NOACK_MAP, 
+ 
+	NL80211_ATTR_INACTIVITY_TIMEOUT, 
+ 
+	NL80211_ATTR_RX_SIGNAL_DBM, 
+ 
+	NL80211_ATTR_BG_SCAN_PERIOD, 
+ 
+	NL80211_ATTR_WDEV, 
+ 
+	NL80211_ATTR_USER_REG_HINT_TYPE, 
+ 
+	NL80211_ATTR_CONN_FAILED_REASON, 
+ 
+	NL80211_ATTR_AUTH_DATA, 
+ 
+	NL80211_ATTR_VHT_CAPABILITY, 
+ 
+	NL80211_ATTR_SCAN_FLAGS, 
+ 
+	NL80211_ATTR_CHANNEL_WIDTH, 
+	NL80211_ATTR_CENTER_FREQ1, 
+	NL80211_ATTR_CENTER_FREQ2, 
+ 
+	NL80211_ATTR_P2P_CTWINDOW, 
+	NL80211_ATTR_P2P_OPPPS, 
+ 
+	NL80211_ATTR_LOCAL_MESH_POWER_MODE, 
+ 
+	NL80211_ATTR_ACL_POLICY, 
+ 
+	NL80211_ATTR_MAC_ADDRS, 
+ 
+	NL80211_ATTR_MAC_ACL_MAX, 
+ 
+	NL80211_ATTR_RADAR_EVENT, 
+ 
+	NL80211_ATTR_EXT_CAPA, 
+	NL80211_ATTR_EXT_CAPA_MASK, 
+ 
+	NL80211_ATTR_STA_CAPABILITY, 
+	NL80211_ATTR_STA_EXT_CAPABILITY, 
+ 
+	NL80211_ATTR_PROTOCOL_FEATURES, 
+	NL80211_ATTR_SPLIT_WIPHY_DUMP, 
+ 
+	NL80211_ATTR_DISABLE_VHT, 
+	NL80211_ATTR_VHT_CAPABILITY_MASK, 
+ 
+	NL80211_ATTR_MDID, 
+	NL80211_ATTR_IE_RIC, 
+ 
+	NL80211_ATTR_CRIT_PROT_ID, 
+	NL80211_ATTR_MAX_CRIT_PROT_DURATION, 
+ 
+	NL80211_ATTR_PEER_AID, 
+ 
+	NL80211_ATTR_COALESCE_RULE, 
+ 
+	NL80211_ATTR_CH_SWITCH_COUNT, 
+	NL80211_ATTR_CH_SWITCH_BLOCK_TX, 
+	NL80211_ATTR_CSA_IES, 
+	NL80211_ATTR_CSA_C_OFF_BEACON, 
+	NL80211_ATTR_CSA_C_OFF_PRESP, 
+ 
+	NL80211_ATTR_RXMGMT_FLAGS, 
+ 
+	NL80211_ATTR_STA_SUPPORTED_CHANNELS, 
+ 
+	NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES, 
+ 
+	NL80211_ATTR_HANDLE_DFS, 
+ 
+	NL80211_ATTR_SUPPORT_5_MHZ, 
+	NL80211_ATTR_SUPPORT_10_MHZ, 
+ 
+	NL80211_ATTR_OPMODE_NOTIF, 
+ 
+	NL80211_ATTR_VENDOR_ID, 
+	NL80211_ATTR_VENDOR_SUBCMD, 
+	NL80211_ATTR_VENDOR_DATA, 
+	NL80211_ATTR_VENDOR_EVENTS, 
+ 
+	NL80211_ATTR_QOS_MAP, 
+ 
+	NL80211_ATTR_MAC_HINT, 
+	NL80211_ATTR_WIPHY_FREQ_HINT, 
+ 
+	NL80211_ATTR_MAX_AP_ASSOC_STA, 
+ 
+	NL80211_ATTR_TDLS_PEER_CAPABILITY, 
+ 
+	NL80211_ATTR_SOCKET_OWNER, 
+ 
+	NL80211_ATTR_CSA_C_OFFSETS_TX, 
+	NL80211_ATTR_MAX_CSA_COUNTERS, 
+ 
+	NL80211_ATTR_TDLS_INITIATOR, 
+ 
+	NL80211_ATTR_USE_RRM, 
+ 
+	NL80211_ATTR_WIPHY_DYN_ACK, 
+ 
+	NL80211_ATTR_TSID, 
+	NL80211_ATTR_USER_PRIO, 
+	NL80211_ATTR_ADMITTED_TIME, 
+ 
+	NL80211_ATTR_SMPS_MODE, 
+ 
+	NL80211_ATTR_OPER_CLASS, 
+ 
+	NL80211_ATTR_MAC_MASK, 
+ 
+	NL80211_ATTR_WIPHY_SELF_MANAGED_REG, 
+ 
+	NL80211_ATTR_EXT_FEATURES, 
+ 
+	NL80211_ATTR_SURVEY_RADIO_STATS, 
+ 
+	NL80211_ATTR_NETNS_FD, 
+ 
+	NL80211_ATTR_SCHED_SCAN_DELAY, 
+ 
+	NL80211_ATTR_REG_INDOOR, 
+ 
+	NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS, 
+	NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL, 
+	NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS, 
+	NL80211_ATTR_SCHED_SCAN_PLANS, 
+ 
+	NL80211_ATTR_PBSS, 
+ 
+	NL80211_ATTR_BSS_SELECT, 
+ 
+	NL80211_ATTR_STA_SUPPORT_P2P_PS, 
+ 
+	NL80211_ATTR_PAD, 
+ 
+	NL80211_ATTR_IFTYPE_EXT_CAPA, 
+ 
+	NL80211_ATTR_MU_MIMO_GROUP_DATA, 
+	NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR, 
+ 
+	NL80211_ATTR_SCAN_START_TIME_TSF, 
+	NL80211_ATTR_SCAN_START_TIME_TSF_BSSID, 
+	NL80211_ATTR_MEASUREMENT_DURATION, 
+	NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY, 
+ 
+	NL80211_ATTR_MESH_PEER_AID, 
+ 
+	NL80211_ATTR_NAN_MASTER_PREF, 
+	NL80211_ATTR_BANDS, 
+	NL80211_ATTR_NAN_FUNC, 
+	NL80211_ATTR_NAN_MATCH, 
+ 
+	NL80211_ATTR_FILS_KEK, 
+	NL80211_ATTR_FILS_NONCES, 
+ 
+	NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED, 
+ 
+	NL80211_ATTR_BSSID, 
+ 
+	NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI, 
+	NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST, 
+ 
+	NL80211_ATTR_TIMEOUT_REASON, 
+ 
+	NL80211_ATTR_FILS_ERP_USERNAME, 
+	NL80211_ATTR_FILS_ERP_REALM, 
+	NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM, 
+	NL80211_ATTR_FILS_ERP_RRK, 
+	NL80211_ATTR_FILS_CACHE_ID, 
+ 
+	NL80211_ATTR_PMK, 
+ 
+	NL80211_ATTR_SCHED_SCAN_MULTI, 
+	NL80211_ATTR_SCHED_SCAN_MAX_REQS, 
+ 
+	NL80211_ATTR_WANT_1X_4WAY_HS, 
+	NL80211_ATTR_PMKR0_NAME, 
+	NL80211_ATTR_PORT_AUTHORIZED, 
+ 
+	NL80211_ATTR_EXTERNAL_AUTH_ACTION, 
+	NL80211_ATTR_EXTERNAL_AUTH_SUPPORT, 
+ 
+	NL80211_ATTR_NSS, 
+	NL80211_ATTR_ACK_SIGNAL, 
+ 
+	NL80211_ATTR_CONTROL_PORT_OVER_NL80211, 
+ 
+	NL80211_ATTR_TXQ_STATS, 
+	NL80211_ATTR_TXQ_LIMIT, 
+	NL80211_ATTR_TXQ_MEMORY_LIMIT, 
+	NL80211_ATTR_TXQ_QUANTUM, 
+ 
+	NL80211_ATTR_HE_CAPABILITY, 
+ 
+	NL80211_ATTR_FTM_RESPONDER, 
+ 
+	NL80211_ATTR_FTM_RESPONDER_STATS, 
+ 
+	NL80211_ATTR_TIMEOUT, 
+ 
+	NL80211_ATTR_PEER_MEASUREMENTS, 
+ 
+	NL80211_ATTR_AIRTIME_WEIGHT, 
+	NL80211_ATTR_STA_TX_POWER_SETTING, 
+	NL80211_ATTR_STA_TX_POWER, 
+ 
+	NL80211_ATTR_SAE_PASSWORD, 
+ 
+	NL80211_ATTR_TWT_RESPONDER, 
+ 
+	NL80211_ATTR_HE_OBSS_PD, 
+ 
+	NL80211_ATTR_WIPHY_EDMG_CHANNELS, 
+	NL80211_ATTR_WIPHY_EDMG_BW_CONFIG, 
+ 
+	NL80211_ATTR_VLAN_ID, 
+ 
+	NL80211_ATTR_HE_BSS_COLOR, 
+ 
+	NL80211_ATTR_IFTYPE_AKM_SUITES, 
+ 
+	NL80211_ATTR_TID_CONFIG, 
+ 
+	NL80211_ATTR_CONTROL_PORT_NO_PREAUTH, 
+ 
+	NL80211_ATTR_PMK_LIFETIME, 
+	NL80211_ATTR_PMK_REAUTH_THRESHOLD, 
+ 
+	/* add attributes here, update the policy in nl80211.c */ 
+ 
+	__NL80211_ATTR_AFTER_LAST, 
+	NUM_NL80211_ATTR = __NL80211_ATTR_AFTER_LAST, 
+	NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1 
+}; 
+ 
+/* source-level API compatibility */ 
+#define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION 
+#define	NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG 
+#define NL80211_ATTR_IFACE_SOCKET_OWNER NL80211_ATTR_SOCKET_OWNER 
+#define NL80211_ATTR_SAE_DATA NL80211_ATTR_AUTH_DATA 
+ 
+/* 
+ * Allow user space programs to use #ifdef on new attributes by defining them 
+ * here 
+ */ 
+#define NL80211_CMD_CONNECT NL80211_CMD_CONNECT 
+#define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY 
+#define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES 
+#define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS 
+#define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ 
+#define NL80211_ATTR_WIPHY_CHANNEL_TYPE NL80211_ATTR_WIPHY_CHANNEL_TYPE 
+#define NL80211_ATTR_MGMT_SUBTYPE NL80211_ATTR_MGMT_SUBTYPE 
+#define NL80211_ATTR_IE NL80211_ATTR_IE 
+#define NL80211_ATTR_REG_INITIATOR NL80211_ATTR_REG_INITIATOR 
+#define NL80211_ATTR_REG_TYPE NL80211_ATTR_REG_TYPE 
+#define NL80211_ATTR_FRAME NL80211_ATTR_FRAME 
+#define NL80211_ATTR_SSID NL80211_ATTR_SSID 
+#define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE 
+#define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE 
+#define NL80211_ATTR_CIPHER_SUITES_PAIRWISE NL80211_ATTR_CIPHER_SUITES_PAIRWISE 
+#define NL80211_ATTR_CIPHER_SUITE_GROUP NL80211_ATTR_CIPHER_SUITE_GROUP 
+#define NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS 
+#define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES 
+#define NL80211_ATTR_KEY NL80211_ATTR_KEY 
+#define NL80211_ATTR_KEYS NL80211_ATTR_KEYS 
+#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS 
+ 
+#define NL80211_WIPHY_NAME_MAXLEN		64 
+ 
+#define NL80211_MAX_SUPP_RATES			32 
+#define NL80211_MAX_SUPP_HT_RATES		77 
+#define NL80211_MAX_SUPP_REG_RULES		128 
+#define NL80211_TKIP_DATA_OFFSET_ENCR_KEY	0 
+#define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY	16 
+#define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY	24 
+#define NL80211_HT_CAPABILITY_LEN		26 
+#define NL80211_VHT_CAPABILITY_LEN		12 
+#define NL80211_HE_MIN_CAPABILITY_LEN           16 
+#define NL80211_HE_MAX_CAPABILITY_LEN           54 
+#define NL80211_MAX_NR_CIPHER_SUITES		5 
+#define NL80211_MAX_NR_AKM_SUITES		2 
+ 
+#define NL80211_MIN_REMAIN_ON_CHANNEL_TIME	10 
+ 
+/* default RSSI threshold for scan results if none specified. */ 
+#define NL80211_SCAN_RSSI_THOLD_OFF		-300 
+ 
+#define NL80211_CQM_TXE_MAX_INTVL		1800 
+ 
+/** 
+ * enum nl80211_iftype - (virtual) interface types 
+ * 
+ * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides 
+ * @NL80211_IFTYPE_ADHOC: independent BSS member 
+ * @NL80211_IFTYPE_STATION: managed BSS member 
+ * @NL80211_IFTYPE_AP: access point 
+ * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points; VLAN interfaces 
+ *	are a bit special in that they must always be tied to a pre-existing 
+ *	AP type interface. 
+ * @NL80211_IFTYPE_WDS: wireless distribution interface 
+ * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames 
+ * @NL80211_IFTYPE_MESH_POINT: mesh point 
+ * @NL80211_IFTYPE_P2P_CLIENT: P2P client 
+ * @NL80211_IFTYPE_P2P_GO: P2P group owner 
+ * @NL80211_IFTYPE_P2P_DEVICE: P2P device interface type, this is not a netdev 
+ *	and therefore can't be created in the normal ways, use the 
+ *	%NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE 
+ *	commands to create and destroy one 
+ * @NL80211_IF_TYPE_OCB: Outside Context of a BSS 
+ *	This mode corresponds to the MIB variable dot11OCBActivated=true 
+ * @NL80211_IFTYPE_NAN: NAN device interface type (not a netdev) 
+ * @NL80211_IFTYPE_MAX: highest interface type number currently defined 
+ * @NUM_NL80211_IFTYPES: number of defined interface types 
+ * 
+ * These values are used with the %NL80211_ATTR_IFTYPE 
+ * to set the type of an interface. 
+ * 
+ */ 
+enum nl80211_iftype { 
+	NL80211_IFTYPE_UNSPECIFIED, 
+	NL80211_IFTYPE_ADHOC, 
+	NL80211_IFTYPE_STATION, 
+	NL80211_IFTYPE_AP, 
+	NL80211_IFTYPE_AP_VLAN, 
+	NL80211_IFTYPE_WDS, 
+	NL80211_IFTYPE_MONITOR, 
+	NL80211_IFTYPE_MESH_POINT, 
+	NL80211_IFTYPE_P2P_CLIENT, 
+	NL80211_IFTYPE_P2P_GO, 
+	NL80211_IFTYPE_P2P_DEVICE, 
+	NL80211_IFTYPE_OCB, 
+	NL80211_IFTYPE_NAN, 
+ 
+	/* keep last */ 
+	NUM_NL80211_IFTYPES, 
+	NL80211_IFTYPE_MAX = NUM_NL80211_IFTYPES - 1 
+}; 
+ 
+/** 
+ * enum nl80211_sta_flags - station flags 
+ * 
+ * Station flags. When a station is added to an AP interface, it is 
+ * assumed to be already associated (and hence authenticated.) 
+ * 
+ * @__NL80211_STA_FLAG_INVALID: attribute number 0 is reserved 
+ * @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X) 
+ * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames 
+ *	with short barker preamble 
+ * @NL80211_STA_FLAG_WME: station is WME/QoS capable 
+ * @NL80211_STA_FLAG_MFP: station uses management frame protection 
+ * @NL80211_STA_FLAG_AUTHENTICATED: station is authenticated 
+ * @NL80211_STA_FLAG_TDLS_PEER: station is a TDLS peer -- this flag should 
+ *	only be used in managed mode (even in the flags mask). Note that the 
+ *	flag can't be changed, it is only valid while adding a station, and 
+ *	attempts to change it will silently be ignored (rather than rejected 
+ *	as errors.) 
+ * @NL80211_STA_FLAG_ASSOCIATED: station is associated; used with drivers 
+ *	that support %NL80211_FEATURE_FULL_AP_CLIENT_STATE to transition a 
+ *	previously added station into associated state 
+ * @NL80211_STA_FLAG_MAX: highest station flag number currently defined 
+ * @__NL80211_STA_FLAG_AFTER_LAST: internal use 
+ */ 
+enum nl80211_sta_flags { 
+	__NL80211_STA_FLAG_INVALID, 
+	NL80211_STA_FLAG_AUTHORIZED, 
+	NL80211_STA_FLAG_SHORT_PREAMBLE, 
+	NL80211_STA_FLAG_WME, 
+	NL80211_STA_FLAG_MFP, 
+	NL80211_STA_FLAG_AUTHENTICATED, 
+	NL80211_STA_FLAG_TDLS_PEER, 
+	NL80211_STA_FLAG_ASSOCIATED, 
+ 
+	/* keep last */ 
+	__NL80211_STA_FLAG_AFTER_LAST, 
+	NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1 
+}; 
+ 
+/** 
+ * enum nl80211_sta_p2p_ps_status - station support of P2P PS 
+ * 
+ * @NL80211_P2P_PS_UNSUPPORTED: station doesn't support P2P PS mechanism 
+ * @@NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism 
+ * @NUM_NL80211_P2P_PS_STATUS: number of values 
+ */ 
+enum nl80211_sta_p2p_ps_status { 
+	NL80211_P2P_PS_UNSUPPORTED = 0, 
+	NL80211_P2P_PS_SUPPORTED, 
+ 
+	NUM_NL80211_P2P_PS_STATUS, 
+}; 
+ 
+#define NL80211_STA_FLAG_MAX_OLD_API	NL80211_STA_FLAG_TDLS_PEER 
+ 
+/** 
+ * struct nl80211_sta_flag_update - station flags mask/set 
+ * @mask: mask of station flags to set 
+ * @set: which values to set them to 
+ * 
+ * Both mask and set contain bits as per &enum nl80211_sta_flags. 
+ */ 
+struct nl80211_sta_flag_update { 
+	__u32 mask; 
+	__u32 set; 
+} __attribute__((packed)); 
+ 
+/** 
+ * enum nl80211_he_gi - HE guard interval 
+ * @NL80211_RATE_INFO_HE_GI_0_8: 0.8 usec 
+ * @NL80211_RATE_INFO_HE_GI_1_6: 1.6 usec 
+ * @NL80211_RATE_INFO_HE_GI_3_2: 3.2 usec 
+ */ 
+enum nl80211_he_gi { 
+	NL80211_RATE_INFO_HE_GI_0_8, 
+	NL80211_RATE_INFO_HE_GI_1_6, 
+	NL80211_RATE_INFO_HE_GI_3_2, 
+}; 
+ 
+/** 
+ * enum nl80211_he_ru_alloc - HE RU allocation values 
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_26: 26-tone RU allocation 
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_52: 52-tone RU allocation 
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_106: 106-tone RU allocation 
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_242: 242-tone RU allocation 
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_484: 484-tone RU allocation 
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_996: 996-tone RU allocation 
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_2x996: 2x996-tone RU allocation 
+ */ 
+enum nl80211_he_ru_alloc { 
+	NL80211_RATE_INFO_HE_RU_ALLOC_26, 
+	NL80211_RATE_INFO_HE_RU_ALLOC_52, 
+	NL80211_RATE_INFO_HE_RU_ALLOC_106, 
+	NL80211_RATE_INFO_HE_RU_ALLOC_242, 
+	NL80211_RATE_INFO_HE_RU_ALLOC_484, 
+	NL80211_RATE_INFO_HE_RU_ALLOC_996, 
+	NL80211_RATE_INFO_HE_RU_ALLOC_2x996, 
+}; 
+ 
+/** 
+ * enum nl80211_rate_info - bitrate information 
+ * 
+ * These attribute types are used with %NL80211_STA_INFO_TXRATE 
+ * when getting information about the bitrate of a station. 
+ * There are 2 attributes for bitrate, a legacy one that represents 
+ * a 16-bit value, and new one that represents a 32-bit value. 
+ * If the rate value fits into 16 bit, both attributes are reported 
+ * with the same value. If the rate is too high to fit into 16 bits 
+ * (>6.5535Gbps) only 32-bit attribute is included. 
+ * User space tools encouraged to use the 32-bit attribute and fall 
+ * back to the 16-bit one for compatibility with older kernels. 
+ * 
+ * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved 
+ * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s) 
+ * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8) 
+ * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 MHz dualchannel bitrate 
+ * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval 
+ * @NL80211_RATE_INFO_BITRATE32: total bitrate (u32, 100kbit/s) 
+ * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined 
+ * @NL80211_RATE_INFO_VHT_MCS: MCS index for VHT (u8) 
+ * @NL80211_RATE_INFO_VHT_NSS: number of streams in VHT (u8) 
+ * @NL80211_RATE_INFO_80_MHZ_WIDTH: 80 MHz VHT rate 
+ * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: unused - 80+80 is treated the 
+ *	same as 160 for purposes of the bitrates 
+ * @NL80211_RATE_INFO_160_MHZ_WIDTH: 160 MHz VHT rate 
+ * @NL80211_RATE_INFO_10_MHZ_WIDTH: 10 MHz width - note that this is 
+ *	a legacy rate and will be reported as the actual bitrate, i.e. 
+ *	half the base (20 MHz) rate 
+ * @NL80211_RATE_INFO_5_MHZ_WIDTH: 5 MHz width - note that this is 
+ *	a legacy rate and will be reported as the actual bitrate, i.e. 
+ *	a quarter of the base (20 MHz) rate 
+ * @NL80211_RATE_INFO_HE_MCS: HE MCS index (u8, 0-11) 
+ * @NL80211_RATE_INFO_HE_NSS: HE NSS value (u8, 1-8) 
+ * @NL80211_RATE_INFO_HE_GI: HE guard interval identifier 
+ *	(u8, see &enum nl80211_he_gi) 
+ * @NL80211_RATE_INFO_HE_DCM: HE DCM value (u8, 0/1) 
+ * @NL80211_RATE_INFO_RU_ALLOC: HE RU allocation, if not present then 
+ *	non-OFDMA was used (u8, see &enum nl80211_he_ru_alloc) 
+ * @__NL80211_RATE_INFO_AFTER_LAST: internal use 
+ */ 
+enum nl80211_rate_info { 
+	__NL80211_RATE_INFO_INVALID, 
+	NL80211_RATE_INFO_BITRATE, 
+	NL80211_RATE_INFO_MCS, 
+	NL80211_RATE_INFO_40_MHZ_WIDTH, 
+	NL80211_RATE_INFO_SHORT_GI, 
+	NL80211_RATE_INFO_BITRATE32, 
+	NL80211_RATE_INFO_VHT_MCS, 
+	NL80211_RATE_INFO_VHT_NSS, 
+	NL80211_RATE_INFO_80_MHZ_WIDTH, 
+	NL80211_RATE_INFO_80P80_MHZ_WIDTH, 
+	NL80211_RATE_INFO_160_MHZ_WIDTH, 
+	NL80211_RATE_INFO_10_MHZ_WIDTH, 
+	NL80211_RATE_INFO_5_MHZ_WIDTH, 
+	NL80211_RATE_INFO_HE_MCS, 
+	NL80211_RATE_INFO_HE_NSS, 
+	NL80211_RATE_INFO_HE_GI, 
+	NL80211_RATE_INFO_HE_DCM, 
+	NL80211_RATE_INFO_HE_RU_ALLOC, 
+ 
+	/* keep last */ 
+	__NL80211_RATE_INFO_AFTER_LAST, 
+	NL80211_RATE_INFO_MAX = __NL80211_RATE_INFO_AFTER_LAST - 1 
+}; 
+ 
+/** 
+ * enum nl80211_sta_bss_param - BSS information collected by STA 
+ * 
+ * These attribute types are used with %NL80211_STA_INFO_BSS_PARAM 
+ * when getting information about the bitrate of a station. 
+ * 
+ * @__NL80211_STA_BSS_PARAM_INVALID: attribute number 0 is reserved 
+ * @NL80211_STA_BSS_PARAM_CTS_PROT: whether CTS protection is enabled (flag) 
+ * @NL80211_STA_BSS_PARAM_SHORT_PREAMBLE:  whether short preamble is enabled 
+ *	(flag) 
+ * @NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME:  whether short slot time is enabled 
+ *	(flag) 
+ * @NL80211_STA_BSS_PARAM_DTIM_PERIOD: DTIM period for beaconing (u8) 
+ * @NL80211_STA_BSS_PARAM_BEACON_INTERVAL: Beacon interval (u16) 
+ * @NL80211_STA_BSS_PARAM_MAX: highest sta_bss_param number currently defined 
+ * @__NL80211_STA_BSS_PARAM_AFTER_LAST: internal use 
+ */ 
+enum nl80211_sta_bss_param { 
+	__NL80211_STA_BSS_PARAM_INVALID, 
+	NL80211_STA_BSS_PARAM_CTS_PROT, 
+	NL80211_STA_BSS_PARAM_SHORT_PREAMBLE, 
+	NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME, 
+	NL80211_STA_BSS_PARAM_DTIM_PERIOD, 
+	NL80211_STA_BSS_PARAM_BEACON_INTERVAL, 
+ 
+	/* keep last */ 
+	__NL80211_STA_BSS_PARAM_AFTER_LAST, 
+	NL80211_STA_BSS_PARAM_MAX = __NL80211_STA_BSS_PARAM_AFTER_LAST - 1 
+}; 
+ 
+/** 
+ * enum nl80211_sta_info - station information 
+ * 
+ * These attribute types are used with %NL80211_ATTR_STA_INFO 
+ * when getting information about a station. 
+ * 
+ * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved 
+ * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs) 
+ * @NL80211_STA_INFO_RX_BYTES: total received bytes (MPDU length) 
+ *	(u32, from this station) 
+ * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (MPDU length) 
+ *	(u32, to this station) 
+ * @NL80211_STA_INFO_RX_BYTES64: total received bytes (MPDU length) 
+ *	(u64, from this station) 
+ * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (MPDU length) 
+ *	(u64, to this station) 
+ * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm) 
+ * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute 
+ * 	containing info as possible, see &enum nl80211_rate_info 
+ * @NL80211_STA_INFO_RX_PACKETS: total received packet (MSDUs and MMPDUs) 
+ *	(u32, from this station) 
+ * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (MSDUs and MMPDUs) 
+ *	(u32, to this station) 
+ * @NL80211_STA_INFO_TX_RETRIES: total retries (MPDUs) (u32, to this station) 
+ * @NL80211_STA_INFO_TX_FAILED: total failed packets (MPDUs) 
+ *	(u32, to this station) 
+ * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm) 
+ * @NL80211_STA_INFO_LLID: the station's mesh LLID 
+ * @NL80211_STA_INFO_PLID: the station's mesh PLID 
+ * @NL80211_STA_INFO_PLINK_STATE: peer link state for the station 
+ *	(see %enum nl80211_plink_state) 
+ * @NL80211_STA_INFO_RX_BITRATE: last unicast data frame rx rate, nested 
+ *	attribute, like NL80211_STA_INFO_TX_BITRATE. 
+ * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute 
+ *     containing info as possible, see &enum nl80211_sta_bss_param 
+ * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected 
+ * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update. 
+ * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32) 
+ * @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64) 
+ * @NL80211_STA_INFO_LOCAL_PM: local mesh STA link-specific power mode 
+ * @NL80211_STA_INFO_PEER_PM: peer mesh STA link-specific power mode 
+ * @NL80211_STA_INFO_NONPEER_PM: neighbor mesh STA power save mode towards 
+ *	non-peer STA 
+ * @NL80211_STA_INFO_CHAIN_SIGNAL: per-chain signal strength of last PPDU 
+ *	Contains a nested array of signal strength attributes (u8, dBm) 
+ * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average 
+ *	Same format as NL80211_STA_INFO_CHAIN_SIGNAL. 
+ * @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the 
+ *	802.11 header (u32, kbps) 
+ * @NL80211_STA_INFO_RX_DROP_MISC: RX packets dropped for unspecified reasons 
+ *	(u64) 
+ * @NL80211_STA_INFO_BEACON_RX: number of beacons received from this peer (u64) 
+ * @NL80211_STA_INFO_BEACON_SIGNAL_AVG: signal strength average 
+ *	for beacons only (u8, dBm) 
+ * @NL80211_STA_INFO_TID_STATS: per-TID statistics (see &enum nl80211_tid_stats) 
+ *	This is a nested attribute where each the inner attribute number is the 
+ *	TID+1 and the special TID 16 (i.e. value 17) is used for non-QoS frames; 
+ *	each one of those is again nested with &enum nl80211_tid_stats 
+ *	attributes carrying the actual values. 
+ * @NL80211_STA_INFO_RX_DURATION: aggregate PPDU duration for all frames 
+ *	received from the station (u64, usec) 
+ * @NL80211_STA_INFO_PAD: attribute used for padding for 64-bit alignment 
+ * @NL80211_STA_INFO_ACK_SIGNAL: signal strength of the last ACK frame(u8, dBm) 
+ * @NL80211_STA_INFO_ACK_SIGNAL_AVG: avg signal strength of ACK frames (s8, dBm) 
+ * @NL80211_STA_INFO_RX_MPDUS: total number of received packets (MPDUs) 
+ *	(u32, from this station) 
+ * @NL80211_STA_INFO_FCS_ERROR_COUNT: total number of packets (MPDUs) received 
+ *	with an FCS error (u32, from this station). This count may not include 
+ *	some packets with an FCS error due to TA corruption. Hence this counter 
+ *	might not be fully accurate. 
+ * @NL80211_STA_INFO_CONNECTED_TO_GATE: set to true if STA has a path to a 
+ *	mesh gate (u8, 0 or 1) 
+ * @NL80211_STA_INFO_TX_DURATION: aggregate PPDU duration for all frames 
+ *	sent to the station (u64, usec) 
+ * @NL80211_STA_INFO_AIRTIME_WEIGHT: current airtime weight for station (u16) 
+ * @NL80211_STA_INFO_AIRTIME_LINK_METRIC: airtime link metric for mesh station 
+ * @NL80211_STA_INFO_ASSOC_AT_BOOTTIME: Timestamp (CLOCK_BOOTTIME, nanoseconds) 
+ *	of STA's association 
+ * @__NL80211_STA_INFO_AFTER_LAST: internal 
+ * @NL80211_STA_INFO_MAX: highest possible station info attribute 
+ */ 
+enum nl80211_sta_info { 
+	__NL80211_STA_INFO_INVALID, 
+	NL80211_STA_INFO_INACTIVE_TIME, 
+	NL80211_STA_INFO_RX_BYTES, 
+	NL80211_STA_INFO_TX_BYTES, 
+	NL80211_STA_INFO_LLID, 
+	NL80211_STA_INFO_PLID, 
+	NL80211_STA_INFO_PLINK_STATE, 
+	NL80211_STA_INFO_SIGNAL, 
+	NL80211_STA_INFO_TX_BITRATE, 
+	NL80211_STA_INFO_RX_PACKETS, 
+	NL80211_STA_INFO_TX_PACKETS, 
+	NL80211_STA_INFO_TX_RETRIES, 
+	NL80211_STA_INFO_TX_FAILED, 
+	NL80211_STA_INFO_SIGNAL_AVG, 
+	NL80211_STA_INFO_RX_BITRATE, 
+	NL80211_STA_INFO_BSS_PARAM, 
+	NL80211_STA_INFO_CONNECTED_TIME, 
+	NL80211_STA_INFO_STA_FLAGS, 
+	NL80211_STA_INFO_BEACON_LOSS, 
+	NL80211_STA_INFO_T_OFFSET, 
+	NL80211_STA_INFO_LOCAL_PM, 
+	NL80211_STA_INFO_PEER_PM, 
+	NL80211_STA_INFO_NONPEER_PM, 
+	NL80211_STA_INFO_RX_BYTES64, 
+	NL80211_STA_INFO_TX_BYTES64, 
+	NL80211_STA_INFO_CHAIN_SIGNAL, 
+	NL80211_STA_INFO_CHAIN_SIGNAL_AVG, 
+	NL80211_STA_INFO_EXPECTED_THROUGHPUT, 
+	NL80211_STA_INFO_RX_DROP_MISC, 
+	NL80211_STA_INFO_BEACON_RX, 
+	NL80211_STA_INFO_BEACON_SIGNAL_AVG, 
+	NL80211_STA_INFO_TID_STATS, 
+	NL80211_STA_INFO_RX_DURATION, 
+	NL80211_STA_INFO_PAD, 
+	NL80211_STA_INFO_ACK_SIGNAL, 
+	NL80211_STA_INFO_ACK_SIGNAL_AVG, 
+	NL80211_STA_INFO_RX_MPDUS, 
+	NL80211_STA_INFO_FCS_ERROR_COUNT, 
+	NL80211_STA_INFO_CONNECTED_TO_GATE, 
+	NL80211_STA_INFO_TX_DURATION, 
+	NL80211_STA_INFO_AIRTIME_WEIGHT, 
+	NL80211_STA_INFO_AIRTIME_LINK_METRIC, 
+	NL80211_STA_INFO_ASSOC_AT_BOOTTIME, 
+ 
+	/* keep last */ 
+	__NL80211_STA_INFO_AFTER_LAST, 
+	NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1 
+}; 
+ 
+/* we renamed this - stay compatible */ 
+#define NL80211_STA_INFO_DATA_ACK_SIGNAL_AVG NL80211_STA_INFO_ACK_SIGNAL_AVG 
+ 
+ 
+/** 
+ * enum nl80211_tid_stats - per TID statistics attributes 
+ * @__NL80211_TID_STATS_INVALID: attribute number 0 is reserved 
+ * @NL80211_TID_STATS_RX_MSDU: number of MSDUs received (u64) 
+ * @NL80211_TID_STATS_TX_MSDU: number of MSDUs transmitted (or 
+ *	attempted to transmit; u64) 
+ * @NL80211_TID_STATS_TX_MSDU_RETRIES: number of retries for 
+ *	transmitted MSDUs (not counting the first attempt; u64) 
+ * @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted 
+ *	MSDUs (u64) 
+ * @NL80211_TID_STATS_PAD: attribute used for padding for 64-bit alignment 
+ * @NL80211_TID_STATS_TXQ_STATS: TXQ stats (nested attribute) 
+ * @NUM_NL80211_TID_STATS: number of attributes here 
+ * @NL80211_TID_STATS_MAX: highest numbered attribute here 
+ */ 
+enum nl80211_tid_stats { 
+	__NL80211_TID_STATS_INVALID, 
+	NL80211_TID_STATS_RX_MSDU, 
+	NL80211_TID_STATS_TX_MSDU, 
+	NL80211_TID_STATS_TX_MSDU_RETRIES, 
+	NL80211_TID_STATS_TX_MSDU_FAILED, 
+	NL80211_TID_STATS_PAD, 
+	NL80211_TID_STATS_TXQ_STATS, 
+ 
+	/* keep last */ 
+	NUM_NL80211_TID_STATS, 
+	NL80211_TID_STATS_MAX = NUM_NL80211_TID_STATS - 1 
+}; 
+ 
+/** 
+ * enum nl80211_txq_stats - per TXQ statistics attributes 
+ * @__NL80211_TXQ_STATS_INVALID: attribute number 0 is reserved 
+ * @NUM_NL80211_TXQ_STATS: number of attributes here 
+ * @NL80211_TXQ_STATS_BACKLOG_BYTES: number of bytes currently backlogged 
+ * @NL80211_TXQ_STATS_BACKLOG_PACKETS: number of packets currently 
+ *      backlogged 
+ * @NL80211_TXQ_STATS_FLOWS: total number of new flows seen 
+ * @NL80211_TXQ_STATS_DROPS: total number of packet drops 
+ * @NL80211_TXQ_STATS_ECN_MARKS: total number of packet ECN marks 
+ * @NL80211_TXQ_STATS_OVERLIMIT: number of drops due to queue space overflow 
+ * @NL80211_TXQ_STATS_OVERMEMORY: number of drops due to memory limit overflow 
+ *      (only for per-phy stats) 
+ * @NL80211_TXQ_STATS_COLLISIONS: number of hash collisions 
+ * @NL80211_TXQ_STATS_TX_BYTES: total number of bytes dequeued from TXQ 
+ * @NL80211_TXQ_STATS_TX_PACKETS: total number of packets dequeued from TXQ 
+ * @NL80211_TXQ_STATS_MAX_FLOWS: number of flow buckets for PHY 
+ * @NL80211_TXQ_STATS_MAX: highest numbered attribute here 
+ */ 
+enum nl80211_txq_stats { 
+	__NL80211_TXQ_STATS_INVALID, 
+	NL80211_TXQ_STATS_BACKLOG_BYTES, 
+	NL80211_TXQ_STATS_BACKLOG_PACKETS, 
+	NL80211_TXQ_STATS_FLOWS, 
+	NL80211_TXQ_STATS_DROPS, 
+	NL80211_TXQ_STATS_ECN_MARKS, 
+	NL80211_TXQ_STATS_OVERLIMIT, 
+	NL80211_TXQ_STATS_OVERMEMORY, 
+	NL80211_TXQ_STATS_COLLISIONS, 
+	NL80211_TXQ_STATS_TX_BYTES, 
+	NL80211_TXQ_STATS_TX_PACKETS, 
+	NL80211_TXQ_STATS_MAX_FLOWS, 
+ 
+	/* keep last */ 
+	NUM_NL80211_TXQ_STATS, 
+	NL80211_TXQ_STATS_MAX = NUM_NL80211_TXQ_STATS - 1 
+}; 
+ 
+/** 
+ * enum nl80211_mpath_flags - nl80211 mesh path flags 
+ * 
+ * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active 
+ * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running 
+ * @NL80211_MPATH_FLAG_SN_VALID: the mesh path contains a valid SN 
+ * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set 
+ * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded 
+ */ 
+enum nl80211_mpath_flags { 
+	NL80211_MPATH_FLAG_ACTIVE =	1<<0, 
+	NL80211_MPATH_FLAG_RESOLVING =	1<<1, 
+	NL80211_MPATH_FLAG_SN_VALID =	1<<2, 
+	NL80211_MPATH_FLAG_FIXED =	1<<3, 
+	NL80211_MPATH_FLAG_RESOLVED =	1<<4, 
+}; 
+ 
+/** 
+ * enum nl80211_mpath_info - mesh path information 
+ * 
+ * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting 
+ * information about a mesh path. 
+ * 
+ * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved 
+ * @NL80211_MPATH_INFO_FRAME_QLEN: number of queued frames for this destination 
+ * @NL80211_MPATH_INFO_SN: destination sequence number 
+ * @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path 
+ * @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now 
+ * @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in 
+ * 	&enum nl80211_mpath_flags; 
+ * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec 
+ * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries 
+ * @NL80211_MPATH_INFO_HOP_COUNT: hop count to destination 
+ * @NL80211_MPATH_INFO_PATH_CHANGE: total number of path changes to destination 
+ * @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number 
+ *	currently defined 
+ * @__NL80211_MPATH_INFO_AFTER_LAST: internal use 
+ */ 
+enum nl80211_mpath_info { 
+	__NL80211_MPATH_INFO_INVALID, 
+	NL80211_MPATH_INFO_FRAME_QLEN, 
+	NL80211_MPATH_INFO_SN, 
+	NL80211_MPATH_INFO_METRIC, 
+	NL80211_MPATH_INFO_EXPTIME, 
+	NL80211_MPATH_INFO_FLAGS, 
+	NL80211_MPATH_INFO_DISCOVERY_TIMEOUT, 
+	NL80211_MPATH_INFO_DISCOVERY_RETRIES, 
+	NL80211_MPATH_INFO_HOP_COUNT, 
+	NL80211_MPATH_INFO_PATH_CHANGE, 
+ 
+	/* keep last */ 
+	__NL80211_MPATH_INFO_AFTER_LAST, 
+	NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 1 
+}; 
+ 
+/** 
+ * enum nl80211_band_iftype_attr - Interface type data attributes 
+ * 
+ * @__NL80211_BAND_IFTYPE_ATTR_INVALID: attribute number 0 is reserved 
+ * @NL80211_BAND_IFTYPE_ATTR_IFTYPES: nested attribute containing a flag attribute 
+ *     for each interface type that supports the band data 
+ * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC: HE MAC capabilities as in HE 
+ *     capabilities IE 
+ * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY: HE PHY capabilities as in HE 
+ *     capabilities IE 
+ * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET: HE supported NSS/MCS as in HE 
+ *     capabilities IE 
+ * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE: HE PPE thresholds information as 
+ *     defined in HE capabilities IE 
+ * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band HE capability attribute currently 
+ *     defined 
+ * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use 
+ */ 
+enum nl80211_band_iftype_attr { 
+	__NL80211_BAND_IFTYPE_ATTR_INVALID, 
+ 
+	NL80211_BAND_IFTYPE_ATTR_IFTYPES, 
+	NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC, 
+	NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY, 
+	NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET, 
+	NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE, 
+ 
+	/* keep last */ 
+	__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST, 
+	NL80211_BAND_IFTYPE_ATTR_MAX = __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST - 1 
+}; 
+ 
+/** 
+ * enum nl80211_band_attr - band attributes 
+ * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved 
+ * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band, 
+ *	an array of nested frequency attributes 
+ * @NL80211_BAND_ATTR_RATES: supported bitrates in this band, 
+ *	an array of nested bitrate attributes 
+ * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as 
+ *	defined in 802.11n 
+ * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE 
+ * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n 
+ * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n 
+ * @NL80211_BAND_ATTR_VHT_MCS_SET: 32-byte attribute containing the MCS set as 
+ *	defined in 802.11ac 
+ * @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE 
+ * @NL80211_BAND_ATTR_IFTYPE_DATA: nested array attribute, with each entry using 
+ *	attributes from &enum nl80211_band_iftype_attr 
+ * @NL80211_BAND_ATTR_EDMG_CHANNELS: bitmap that indicates the 2.16 GHz 
+ *	channel(s) that are allowed to be used for EDMG transmissions. 
+ *	Defined by IEEE P802.11ay/D4.0 section 9.4.2.251. 
+ * @NL80211_BAND_ATTR_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes 
+ *	the allowed channel bandwidth configurations. 
+ *	Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13. 
+ * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined 
+ * @__NL80211_BAND_ATTR_AFTER_LAST: internal use 
+ */ 
+enum nl80211_band_attr { 
+	__NL80211_BAND_ATTR_INVALID, 
+	NL80211_BAND_ATTR_FREQS, 
+	NL80211_BAND_ATTR_RATES, 
+ 
+	NL80211_BAND_ATTR_HT_MCS_SET, 
+	NL80211_BAND_ATTR_HT_CAPA, 
+	NL80211_BAND_ATTR_HT_AMPDU_FACTOR, 
+	NL80211_BAND_ATTR_HT_AMPDU_DENSITY, 
+ 
+	NL80211_BAND_ATTR_VHT_MCS_SET, 
+	NL80211_BAND_ATTR_VHT_CAPA, 
+	NL80211_BAND_ATTR_IFTYPE_DATA, 
+ 
+	NL80211_BAND_ATTR_EDMG_CHANNELS, 
+	NL80211_BAND_ATTR_EDMG_BW_CONFIG, 
+ 
+	/* keep last */ 
+	__NL80211_BAND_ATTR_AFTER_LAST, 
+	NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1 
+}; 
+ 
+#define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA 
+ 
+/** 
+ * enum nl80211_wmm_rule - regulatory wmm rule 
+ * 
+ * @__NL80211_WMMR_INVALID: attribute number 0 is reserved 
+ * @NL80211_WMMR_CW_MIN: Minimum contention window slot. 
+ * @NL80211_WMMR_CW_MAX: Maximum contention window slot. 
+ * @NL80211_WMMR_AIFSN: Arbitration Inter Frame Space. 
+ * @NL80211_WMMR_TXOP: Maximum allowed tx operation time. 
+ * @nl80211_WMMR_MAX: highest possible wmm rule. 
+ * @__NL80211_WMMR_LAST: Internal use. 
+ */ 
+enum nl80211_wmm_rule { 
+	__NL80211_WMMR_INVALID, 
+	NL80211_WMMR_CW_MIN, 
+	NL80211_WMMR_CW_MAX, 
+	NL80211_WMMR_AIFSN, 
+	NL80211_WMMR_TXOP, 
+ 
+	/* keep last */ 
+	__NL80211_WMMR_LAST, 
+	NL80211_WMMR_MAX = __NL80211_WMMR_LAST - 1 
+}; 
+ 
+/** 
+ * enum nl80211_frequency_attr - frequency attributes 
+ * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved 
+ * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz 
+ * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current 
+ *	regulatory domain. 
+ * @NL80211_FREQUENCY_ATTR_NO_IR: no mechanisms that initiate radiation 
+ * 	are permitted on this channel, this includes sending probe 
+ * 	requests, or modes of operation that require beaconing. 
+ * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory 
+ *	on this channel in current regulatory domain. 
+ * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm 
+ *	(100 * dBm). 
+ * @NL80211_FREQUENCY_ATTR_DFS_STATE: current state for DFS 
+ *	(enum nl80211_dfs_state) 
+ * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in miliseconds for how long 
+ *	this channel is in this DFS state. 
+ * @NL80211_FREQUENCY_ATTR_NO_HT40_MINUS: HT40- isn't possible with this 
+ *	channel as the control channel 
+ * @NL80211_FREQUENCY_ATTR_NO_HT40_PLUS: HT40+ isn't possible with this 
+ *	channel as the control channel 
+ * @NL80211_FREQUENCY_ATTR_NO_80MHZ: any 80 MHz channel using this channel 
+ *	as the primary or any of the secondary channels isn't possible, 
+ *	this includes 80+80 channels 
+ * @NL80211_FREQUENCY_ATTR_NO_160MHZ: any 160 MHz (but not 80+80) channel 
+ *	using this channel as the primary or any of the secondary channels 
+ *	isn't possible 
+ * @NL80211_FREQUENCY_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds. 
+ * @NL80211_FREQUENCY_ATTR_INDOOR_ONLY: Only indoor use is permitted on this 
+ *	channel. A channel that has the INDOOR_ONLY attribute can only be 
+ *	used when there is a clear assessment that the device is operating in 
+ *	an indoor surroundings, i.e., it is connected to AC power (and not 
+ *	through portable DC inverters) or is under the control of a master 
+ *	that is acting as an AP and is connected to AC power. 
+ * @NL80211_FREQUENCY_ATTR_IR_CONCURRENT: IR operation is allowed on this 
+ *	channel if it's connected concurrently to a BSS on the same channel on 
+ *	the 2 GHz band or to a channel in the same UNII band (on the 5 GHz 
+ *	band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO or TDLS 
+ *	off-channel on a channel that has the IR_CONCURRENT attribute set can be 
+ *	done when there is a clear assessment that the device is operating under 
+ *	the guidance of an authorized master, i.e., setting up a GO or TDLS 
+ *	off-channel while the device is also connected to an AP with DFS and 
+ *	radar detection on the UNII band (it is up to user-space, i.e., 
+ *	wpa_supplicant to perform the required verifications). Using this 
+ *	attribute for IR is disallowed for master interfaces (IBSS, AP). 
+ * @NL80211_FREQUENCY_ATTR_NO_20MHZ: 20 MHz operation is not allowed 
+ *	on this channel in current regulatory domain. 
+ * @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed 
+ *	on this channel in current regulatory domain. 
+ * @NL80211_FREQUENCY_ATTR_WMM: this channel has wmm limitations. 
+ *	This is a nested attribute that contains the wmm limitation per AC. 
+ *	(see &enum nl80211_wmm_rule) 
+ * @NL80211_FREQUENCY_ATTR_NO_HE: HE operation is not allowed on this channel 
+ *	in current regulatory domain. 
+ * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number 
+ *	currently defined 
+ * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use 
+ * 
+ * See https://apps.fcc.gov/eas/comments/GetPublishedDocument.html?id=327&tn=528122 
+ * for more information on the FCC description of the relaxations allowed 
+ * by NL80211_FREQUENCY_ATTR_INDOOR_ONLY and 
+ * NL80211_FREQUENCY_ATTR_IR_CONCURRENT. 
+ */ 
+enum nl80211_frequency_attr { 
+	__NL80211_FREQUENCY_ATTR_INVALID, 
+	NL80211_FREQUENCY_ATTR_FREQ, 
+	NL80211_FREQUENCY_ATTR_DISABLED, 
+	NL80211_FREQUENCY_ATTR_NO_IR, 
+	__NL80211_FREQUENCY_ATTR_NO_IBSS, 
+	NL80211_FREQUENCY_ATTR_RADAR, 
+	NL80211_FREQUENCY_ATTR_MAX_TX_POWER, 
+	NL80211_FREQUENCY_ATTR_DFS_STATE, 
+	NL80211_FREQUENCY_ATTR_DFS_TIME, 
+	NL80211_FREQUENCY_ATTR_NO_HT40_MINUS, 
+	NL80211_FREQUENCY_ATTR_NO_HT40_PLUS, 
+	NL80211_FREQUENCY_ATTR_NO_80MHZ, 
+	NL80211_FREQUENCY_ATTR_NO_160MHZ, 
+	NL80211_FREQUENCY_ATTR_DFS_CAC_TIME, 
+	NL80211_FREQUENCY_ATTR_INDOOR_ONLY, 
+	NL80211_FREQUENCY_ATTR_IR_CONCURRENT, 
+	NL80211_FREQUENCY_ATTR_NO_20MHZ, 
+	NL80211_FREQUENCY_ATTR_NO_10MHZ, 
+	NL80211_FREQUENCY_ATTR_WMM, 
+	NL80211_FREQUENCY_ATTR_NO_HE, 
+ 
+	/* keep last */ 
+	__NL80211_FREQUENCY_ATTR_AFTER_LAST, 
+	NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1 
+}; 
+ 
+#define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER 
+#define NL80211_FREQUENCY_ATTR_PASSIVE_SCAN	NL80211_FREQUENCY_ATTR_NO_IR 
+#define NL80211_FREQUENCY_ATTR_NO_IBSS		NL80211_FREQUENCY_ATTR_NO_IR 
+#define NL80211_FREQUENCY_ATTR_NO_IR		NL80211_FREQUENCY_ATTR_NO_IR 
+#define NL80211_FREQUENCY_ATTR_GO_CONCURRENT \ 
+					NL80211_FREQUENCY_ATTR_IR_CONCURRENT 
+ 
+/** 
+ * enum nl80211_bitrate_attr - bitrate attributes 
+ * @__NL80211_BITRATE_ATTR_INVALID: attribute number 0 is reserved 
+ * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps 
+ * @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported 
+ *	in 2.4 GHz band. 
+ * @NL80211_BITRATE_ATTR_MAX: highest bitrate attribute number 
+ *	currently defined 
+ * @__NL80211_BITRATE_ATTR_AFTER_LAST: internal use 
+ */ 
+enum nl80211_bitrate_attr { 
+	__NL80211_BITRATE_ATTR_INVALID, 
+	NL80211_BITRATE_ATTR_RATE, 
+	NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE, 
+ 
+	/* keep last */ 
+	__NL80211_BITRATE_ATTR_AFTER_LAST, 
+	NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 1 
+}; 
+ 
+/** 
+ * enum nl80211_initiator - Indicates the initiator of a reg domain request 
+ * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world 
+ * 	regulatory domain. 
+ * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the 
+ * 	regulatory domain. 
+ * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the 
+ * 	wireless core it thinks its knows the regulatory domain we should be in. 
+ * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an 
+ * 	802.11 country information element with regulatory information it 
+ * 	thinks we should consider. cfg80211 only processes the country 
+ *	code from the IE, and relies on the regulatory domain information 
+ *	structure passed by userspace (CRDA) from our wireless-regdb. 
+ *	If a channel is enabled but the country code indicates it should 
+ *	be disabled we disable the channel and re-enable it upon disassociation. 
+ */ 
+enum nl80211_reg_initiator { 
+	NL80211_REGDOM_SET_BY_CORE, 
+	NL80211_REGDOM_SET_BY_USER, 
+	NL80211_REGDOM_SET_BY_DRIVER, 
+	NL80211_REGDOM_SET_BY_COUNTRY_IE, 
+}; 
+ 
+/** 
+ * enum nl80211_reg_type - specifies the type of regulatory domain 
+ * @NL80211_REGDOM_TYPE_COUNTRY: the regulatory domain set is one that pertains 
+ *	to a specific country. When this is set you can count on the 
+ *	ISO / IEC 3166 alpha2 country code being valid. 
+ * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory 
+ * 	domain. 
+ * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom 
+ * 	driver specific world regulatory domain. These do not apply system-wide 
+ * 	and are only applicable to the individual devices which have requested 
+ * 	them to be applied. 
+ * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product 
+ *	of an intersection between two regulatory domains -- the previously 
+ *	set regulatory domain on the system and the last accepted regulatory 
+ *	domain request to be processed. 
+ */ 
+enum nl80211_reg_type { 
+	NL80211_REGDOM_TYPE_COUNTRY, 
+	NL80211_REGDOM_TYPE_WORLD, 
+	NL80211_REGDOM_TYPE_CUSTOM_WORLD, 
+	NL80211_REGDOM_TYPE_INTERSECTION, 
+}; 
+ 
+/** 
+ * enum nl80211_reg_rule_attr - regulatory rule attributes 
+ * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved 
+ * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional 
+ * 	considerations for a given frequency range. These are the 
+ * 	&enum nl80211_reg_rule_flags. 
+ * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory 
+ * 	rule in KHz. This is not a center of frequency but an actual regulatory 
+ * 	band edge. 
+ * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule 
+ * 	in KHz. This is not a center a frequency but an actual regulatory 
+ * 	band edge. 
+ * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this 
+ *	frequency range, in KHz. 
+ * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain 
+ * 	for a given frequency range. The value is in mBi (100 * dBi). 
+ * 	If you don't have one then don't send this. 
+ * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for 
+ * 	a given frequency range. The value is in mBm (100 * dBm). 
+ * @NL80211_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds. 
+ *	If not present or 0 default CAC time will be used. 
+ * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number 
+ *	currently defined 
+ * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use 
+ */ 
+enum nl80211_reg_rule_attr { 
+	__NL80211_REG_RULE_ATTR_INVALID, 
+	NL80211_ATTR_REG_RULE_FLAGS, 
+ 
+	NL80211_ATTR_FREQ_RANGE_START, 
+	NL80211_ATTR_FREQ_RANGE_END, 
+	NL80211_ATTR_FREQ_RANGE_MAX_BW, 
+ 
+	NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN, 
+	NL80211_ATTR_POWER_RULE_MAX_EIRP, 
+ 
+	NL80211_ATTR_DFS_CAC_TIME, 
+ 
+	/* keep last */ 
+	__NL80211_REG_RULE_ATTR_AFTER_LAST, 
+	NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1 
+}; 
+ 
+/** 
+ * enum nl80211_sched_scan_match_attr - scheduled scan match attributes 
+ * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved 
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching, 
+ *	only report BSS with matching SSID. 
+ *	(This cannot be used together with BSSID.) 
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a 
+ *	BSS in scan results. Filtering is turned off if not specified. Note that 
+ *	if this attribute is in a match set of its own, then it is treated as 
+ *	the default value for all matchsets with an SSID, rather than being a 
+ *	matchset of its own without an RSSI filter. This is due to problems with 
+ *	how this API was implemented in the past. Also, due to the same problem, 
+ *	the only way to create a matchset with only an RSSI filter (with this 
+ *	attribute) is if there's only a single matchset with the RSSI attribute. 
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI: Flag indicating whether 
+ *	%NL80211_SCHED_SCAN_MATCH_ATTR_RSSI to be used as absolute RSSI or 
+ *	relative to current bss's RSSI. 
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST: When present the RSSI level for 
+ *	BSS-es in the specified band is to be adjusted before doing 
+ *	RSSI-based BSS selection. The attribute value is a packed structure 
+ *	value as specified by &struct nl80211_bss_select_rssi_adjust. 
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_BSSID: BSSID to be used for matching 
+ *	(this cannot be used together with SSID). 
+ * @NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI: Nested attribute that carries the 
+ *	band specific minimum rssi thresholds for the bands defined in 
+ *	enum nl80211_band. The minimum rssi threshold value(s32) specific to a 
+ *	band shall be encapsulated in attribute with type value equals to one 
+ *	of the NL80211_BAND_* defined in enum nl80211_band. For example, the 
+ *	minimum rssi threshold value for 2.4GHZ band shall be encapsulated 
+ *	within an attribute of type NL80211_BAND_2GHZ. And one or more of such 
+ *	attributes will be nested within this attribute. 
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter 
+ *	attribute number currently defined 
+ * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use 
+ */ 
+enum nl80211_sched_scan_match_attr { 
+	__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID, 
+ 
+	NL80211_SCHED_SCAN_MATCH_ATTR_SSID, 
+	NL80211_SCHED_SCAN_MATCH_ATTR_RSSI, 
+	NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI, 
+	NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST, 
+	NL80211_SCHED_SCAN_MATCH_ATTR_BSSID, 
+	NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI, 
+ 
+	/* keep last */ 
+	__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST, 
+	NL80211_SCHED_SCAN_MATCH_ATTR_MAX = 
+		__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST - 1 
+}; 
+ 
+/* only for backward compatibility */ 
+#define NL80211_ATTR_SCHED_SCAN_MATCH_SSID NL80211_SCHED_SCAN_MATCH_ATTR_SSID 
+ 
+/** 
+ * enum nl80211_reg_rule_flags - regulatory rule flags 
+ * 
+ * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed 
+ * @NL80211_RRF_NO_CCK: CCK modulation not allowed 
+ * @NL80211_RRF_NO_INDOOR: indoor operation not allowed 
+ * @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed 
+ * @NL80211_RRF_DFS: DFS support is required to be used 
+ * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links 
+ * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links 
+ * @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed, 
+ * 	this includes probe requests or modes of operation that require 
+ * 	beaconing. 
+ * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated 
+ *	base on contiguous rules and wider channels will be allowed to cross 
+ *	multiple contiguous/overlapping frequency ranges. 
+ * @NL80211_RRF_IR_CONCURRENT: See %NL80211_FREQUENCY_ATTR_IR_CONCURRENT 
+ * @NL80211_RRF_NO_HT40MINUS: channels can't be used in HT40- operation 
+ * @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation 
+ * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed 
+ * @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed 
+ * @NL80211_RRF_NO_HE: HE operation not allowed 
+ */ 
+enum nl80211_reg_rule_flags { 
+	NL80211_RRF_NO_OFDM		= 1<<0, 
+	NL80211_RRF_NO_CCK		= 1<<1, 
+	NL80211_RRF_NO_INDOOR		= 1<<2, 
+	NL80211_RRF_NO_OUTDOOR		= 1<<3, 
+	NL80211_RRF_DFS			= 1<<4, 
+	NL80211_RRF_PTP_ONLY		= 1<<5, 
+	NL80211_RRF_PTMP_ONLY		= 1<<6, 
+	NL80211_RRF_NO_IR		= 1<<7, 
+	__NL80211_RRF_NO_IBSS		= 1<<8, 
+	NL80211_RRF_AUTO_BW		= 1<<11, 
+	NL80211_RRF_IR_CONCURRENT	= 1<<12, 
+	NL80211_RRF_NO_HT40MINUS	= 1<<13, 
+	NL80211_RRF_NO_HT40PLUS		= 1<<14, 
+	NL80211_RRF_NO_80MHZ		= 1<<15, 
+	NL80211_RRF_NO_160MHZ		= 1<<16, 
+	NL80211_RRF_NO_HE		= 1<<17, 
+}; 
+ 
+#define NL80211_RRF_PASSIVE_SCAN	NL80211_RRF_NO_IR 
+#define NL80211_RRF_NO_IBSS		NL80211_RRF_NO_IR 
+#define NL80211_RRF_NO_IR		NL80211_RRF_NO_IR 
+#define NL80211_RRF_NO_HT40		(NL80211_RRF_NO_HT40MINUS |\ 
+					 NL80211_RRF_NO_HT40PLUS) 
+#define NL80211_RRF_GO_CONCURRENT	NL80211_RRF_IR_CONCURRENT 
+ 
+/* For backport compatibility with older userspace */ 
+#define NL80211_RRF_NO_IR_ALL		(NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS) 
+ 
+/** 
+ * enum nl80211_dfs_regions - regulatory DFS regions 
+ * 
+ * @NL80211_DFS_UNSET: Country has no DFS master region specified 
+ * @NL80211_DFS_FCC: Country follows DFS master rules from FCC 
+ * @NL80211_DFS_ETSI: Country follows DFS master rules from ETSI 
+ * @NL80211_DFS_JP: Country follows DFS master rules from JP/MKK/Telec 
+ */ 
+enum nl80211_dfs_regions { 
+	NL80211_DFS_UNSET	= 0, 
+	NL80211_DFS_FCC		= 1, 
+	NL80211_DFS_ETSI	= 2, 
+	NL80211_DFS_JP		= 3, 
+}; 
+ 
+/** 
+ * enum nl80211_user_reg_hint_type - type of user regulatory hint 
+ * 
+ * @NL80211_USER_REG_HINT_USER: a user sent the hint. This is always 
+ *	assumed if the attribute is not set. 
+ * @NL80211_USER_REG_HINT_CELL_BASE: the hint comes from a cellular 
+ *	base station. Device drivers that have been tested to work 
+ *	properly to support this type of hint can enable these hints 
+ *	by setting the NL80211_FEATURE_CELL_BASE_REG_HINTS feature 
+ *	capability on the struct wiphy. The wireless core will 
+ *	ignore all cell base station hints until at least one device 
+ *	present has been registered with the wireless core that 
+ *	has listed NL80211_FEATURE_CELL_BASE_REG_HINTS as a 
+ *	supported feature. 
+ * @NL80211_USER_REG_HINT_INDOOR: a user sent an hint indicating that the 
+ *	platform is operating in an indoor environment. 
+ */ 
+enum nl80211_user_reg_hint_type { 
+	NL80211_USER_REG_HINT_USER	= 0, 
+	NL80211_USER_REG_HINT_CELL_BASE = 1, 
+	NL80211_USER_REG_HINT_INDOOR    = 2, 
+}; 
+ 
+/** 
+ * enum nl80211_survey_info - survey information 
+ * 
+ * These attribute types are used with %NL80211_ATTR_SURVEY_INFO 
+ * when getting information about a survey. 
+ * 
+ * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved 
+ * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel 
+ * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm) 
+ * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used 
+ * @NL80211_SURVEY_INFO_TIME: amount of time (in ms) that the radio 
+ *	was turned on (on channel or globally) 
+ * @NL80211_SURVEY_INFO_TIME_BUSY: amount of the time the primary 
+ *	channel was sensed busy (either due to activity or energy detect) 
+ * @NL80211_SURVEY_INFO_TIME_EXT_BUSY: amount of time the extension 
+ *	channel was sensed busy 
+ * @NL80211_SURVEY_INFO_TIME_RX: amount of time the radio spent 
+ *	receiving data (on channel or globally) 
+ * @NL80211_SURVEY_INFO_TIME_TX: amount of time the radio spent 
+ *	transmitting data (on channel or globally) 
+ * @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan 
+ *	(on this channel or globally) 
+ * @NL80211_SURVEY_INFO_PAD: attribute used for padding for 64-bit alignment 
+ * @NL80211_SURVEY_INFO_TIME_BSS_RX: amount of time the radio spent 
+ *	receiving frames destined to the local BSS 
+ * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number 
+ *	currently defined 
+ * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use 
+ */ 
+enum nl80211_survey_info { 
+	__NL80211_SURVEY_INFO_INVALID, 
+	NL80211_SURVEY_INFO_FREQUENCY, 
+	NL80211_SURVEY_INFO_NOISE, 
+	NL80211_SURVEY_INFO_IN_USE, 
+	NL80211_SURVEY_INFO_TIME, 
+	NL80211_SURVEY_INFO_TIME_BUSY, 
+	NL80211_SURVEY_INFO_TIME_EXT_BUSY, 
+	NL80211_SURVEY_INFO_TIME_RX, 
+	NL80211_SURVEY_INFO_TIME_TX, 
+	NL80211_SURVEY_INFO_TIME_SCAN, 
+	NL80211_SURVEY_INFO_PAD, 
+	NL80211_SURVEY_INFO_TIME_BSS_RX, 
+ 
+	/* keep last */ 
+	__NL80211_SURVEY_INFO_AFTER_LAST, 
+	NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1 
+}; 
+ 
+/* keep old names for compatibility */ 
+#define NL80211_SURVEY_INFO_CHANNEL_TIME		NL80211_SURVEY_INFO_TIME 
+#define NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY		NL80211_SURVEY_INFO_TIME_BUSY 
+#define NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY	NL80211_SURVEY_INFO_TIME_EXT_BUSY 
+#define NL80211_SURVEY_INFO_CHANNEL_TIME_RX		NL80211_SURVEY_INFO_TIME_RX 
+#define NL80211_SURVEY_INFO_CHANNEL_TIME_TX		NL80211_SURVEY_INFO_TIME_TX 
+ 
+/** 
+ * enum nl80211_mntr_flags - monitor configuration flags 
+ * 
+ * Monitor configuration flags. 
+ * 
+ * @__NL80211_MNTR_FLAG_INVALID: reserved 
+ * 
+ * @NL80211_MNTR_FLAG_FCSFAIL: pass frames with bad FCS 
+ * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP 
+ * @NL80211_MNTR_FLAG_CONTROL: pass control frames 
+ * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering 
+ * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing. 
+ *	overrides all other flags. 
+ * @NL80211_MNTR_FLAG_ACTIVE: use the configured MAC address 
+ *	and ACK incoming unicast packets. 
+ * 
+ * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use 
+ * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag 
+ */ 
+enum nl80211_mntr_flags { 
+	__NL80211_MNTR_FLAG_INVALID, 
+	NL80211_MNTR_FLAG_FCSFAIL, 
+	NL80211_MNTR_FLAG_PLCPFAIL, 
+	NL80211_MNTR_FLAG_CONTROL, 
+	NL80211_MNTR_FLAG_OTHER_BSS, 
+	NL80211_MNTR_FLAG_COOK_FRAMES, 
+	NL80211_MNTR_FLAG_ACTIVE, 
+ 
+	/* keep last */ 
+	__NL80211_MNTR_FLAG_AFTER_LAST, 
+	NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1 
+}; 
+ 
+/** 
+ * enum nl80211_mesh_power_mode - mesh power save modes 
+ * 
+ * @NL80211_MESH_POWER_UNKNOWN: The mesh power mode of the mesh STA is 
+ *	not known or has not been set yet. 
+ * @NL80211_MESH_POWER_ACTIVE: Active mesh power mode. The mesh STA is 
+ *	in Awake state all the time. 
+ * @NL80211_MESH_POWER_LIGHT_SLEEP: Light sleep mode. The mesh STA will 
+ *	alternate between Active and Doze states, but will wake up for 
+ *	neighbor's beacons. 
+ * @NL80211_MESH_POWER_DEEP_SLEEP: Deep sleep mode. The mesh STA will 
+ *	alternate between Active and Doze states, but may not wake up 
+ *	for neighbor's beacons. 
+ * 
+ * @__NL80211_MESH_POWER_AFTER_LAST - internal use 
+ * @NL80211_MESH_POWER_MAX - highest possible power save level 
+ */ 
+ 
+enum nl80211_mesh_power_mode { 
+	NL80211_MESH_POWER_UNKNOWN, 
+	NL80211_MESH_POWER_ACTIVE, 
+	NL80211_MESH_POWER_LIGHT_SLEEP, 
+	NL80211_MESH_POWER_DEEP_SLEEP, 
+ 
+	__NL80211_MESH_POWER_AFTER_LAST, 
+	NL80211_MESH_POWER_MAX = __NL80211_MESH_POWER_AFTER_LAST - 1 
+}; 
+ 
+/** 
+ * enum nl80211_meshconf_params - mesh configuration parameters 
+ * 
+ * Mesh configuration parameters. These can be changed while the mesh is 
+ * active. 
+ * 
+ * @__NL80211_MESHCONF_INVALID: internal use 
+ * 
+ * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in 
+ *	millisecond units, used by the Peer Link Open message 
+ * 
+ * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in 
+ *	millisecond units, used by the peer link management to close a peer link 
+ * 
+ * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in 
+ *	millisecond units 
+ * 
+ * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed 
+ *	on this mesh interface 
+ * 
+ * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link 
+ *	open retries that can be sent to establish a new peer link instance in a 
+ *	mesh 
+ * 
+ * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh 
+ *	point. 
+ * 
+ * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically open 
+ *	peer links when we detect compatible mesh peers. Disabled if 
+ *	@NL80211_MESH_SETUP_USERSPACE_MPM or @NL80211_MESH_SETUP_USERSPACE_AMPE are 
+ *	set. 
+ * 
+ * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames 
+ *	containing a PREQ that an MP can send to a particular destination (path 
+ *	target) 
+ * 
+ * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths 
+ *	(in milliseconds) 
+ * 
+ * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait 
+ *	until giving up on a path discovery (in milliseconds) 
+ * 
+ * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh 
+ *	points receiving a PREQ shall consider the forwarding information from 
+ *	the root to be valid. (TU = time unit) 
+ * 
+ * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in 
+ *	TUs) during which an MP can send only one action frame containing a PREQ 
+ *	reference element 
+ * 
+ * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs) 
+ *	that it takes for an HWMP information element to propagate across the 
+ *	mesh 
+ * 
+ * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not 
+ * 
+ * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a 
+ *	source mesh point for path selection elements. 
+ * 
+ * @NL80211_MESHCONF_HWMP_RANN_INTERVAL:  The interval of time (in TUs) between 
+ *	root announcements are transmitted. 
+ * 
+ * @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has 
+ *	access to a broader network beyond the MBSS.  This is done via Root 
+ *	Announcement frames. 
+ * 
+ * @NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL: The minimum interval of time (in 
+ *	TUs) during which a mesh STA can send only one Action frame containing a 
+ *	PERR element. 
+ * 
+ * @NL80211_MESHCONF_FORWARDING: set Mesh STA as forwarding or non-forwarding 
+ *	or forwarding entity (default is TRUE - forwarding entity) 
+ * 
+ * @NL80211_MESHCONF_RSSI_THRESHOLD: RSSI threshold in dBm. This specifies the 
+ *	threshold for average signal strength of candidate station to establish 
+ *	a peer link. 
+ * 
+ * @NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR: maximum number of neighbors 
+ *	to synchronize to for 11s default synchronization method 
+ *	(see 11C.12.2.2) 
+ * 
+ * @NL80211_MESHCONF_HT_OPMODE: set mesh HT protection mode. 
+ * 
+ * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute 
+ * 
+ * @NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT: The time (in TUs) for 
+ *	which mesh STAs receiving a proactive PREQ shall consider the forwarding 
+ *	information to the root mesh STA to be valid. 
+ * 
+ * @NL80211_MESHCONF_HWMP_ROOT_INTERVAL: The interval of time (in TUs) between 
+ *	proactive PREQs are transmitted. 
+ * 
+ * @NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL: The minimum interval of time 
+ *	(in TUs) during which a mesh STA can send only one Action frame 
+ *	containing a PREQ element for root path confirmation. 
+ * 
+ * @NL80211_MESHCONF_POWER_MODE: Default mesh power mode for new peer links. 
+ *	type &enum nl80211_mesh_power_mode (u32) 
+ * 
+ * @NL80211_MESHCONF_AWAKE_WINDOW: awake window duration (in TUs) 
+ * 
+ * @NL80211_MESHCONF_PLINK_TIMEOUT: If no tx activity is seen from a STA we've 
+ *	established peering with for longer than this time (in seconds), then 
+ *	remove it from the STA's list of peers. You may set this to 0 to disable 
+ *	the removal of the STA. Default is 30 minutes. 
+ * 
+ * @NL80211_MESHCONF_CONNECTED_TO_GATE: If set to true then this mesh STA 
+ *	will advertise that it is connected to a gate in the mesh formation 
+ *	field.  If left unset then the mesh formation field will only 
+ *	advertise such if there is an active root mesh path. 
+ * 
+ * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use 
+ */ 
+enum nl80211_meshconf_params { 
+	__NL80211_MESHCONF_INVALID, 
+	NL80211_MESHCONF_RETRY_TIMEOUT, 
+	NL80211_MESHCONF_CONFIRM_TIMEOUT, 
+	NL80211_MESHCONF_HOLDING_TIMEOUT, 
+	NL80211_MESHCONF_MAX_PEER_LINKS, 
+	NL80211_MESHCONF_MAX_RETRIES, 
+	NL80211_MESHCONF_TTL, 
+	NL80211_MESHCONF_AUTO_OPEN_PLINKS, 
+	NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES, 
+	NL80211_MESHCONF_PATH_REFRESH_TIME, 
+	NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT, 
+	NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT, 
+	NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, 
+	NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME, 
+	NL80211_MESHCONF_HWMP_ROOTMODE, 
+	NL80211_MESHCONF_ELEMENT_TTL, 
+	NL80211_MESHCONF_HWMP_RANN_INTERVAL, 
+	NL80211_MESHCONF_GATE_ANNOUNCEMENTS, 
+	NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL, 
+	NL80211_MESHCONF_FORWARDING, 
+	NL80211_MESHCONF_RSSI_THRESHOLD, 
+	NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR, 
+	NL80211_MESHCONF_HT_OPMODE, 
+	NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT, 
+	NL80211_MESHCONF_HWMP_ROOT_INTERVAL, 
+	NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, 
+	NL80211_MESHCONF_POWER_MODE, 
+	NL80211_MESHCONF_AWAKE_WINDOW, 
+	NL80211_MESHCONF_PLINK_TIMEOUT, 
+	NL80211_MESHCONF_CONNECTED_TO_GATE, 
+ 
+	/* keep last */ 
+	__NL80211_MESHCONF_ATTR_AFTER_LAST, 
+	NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1 
+}; 
+ 
+/** 
+ * enum nl80211_mesh_setup_params - mesh setup parameters 
+ * 
+ * Mesh setup parameters.  These are used to start/join a mesh and cannot be 
+ * changed while the mesh is active. 
+ * 
+ * @__NL80211_MESH_SETUP_INVALID: Internal use 
+ * 
+ * @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a 
+ *	vendor specific path selection algorithm or disable it to use the 
+ *	default HWMP. 
+ * 
+ * @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a 
+ *	vendor specific path metric or disable it to use the default Airtime 
+ *	metric. 
+ * 
+ * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a 
+ *	robust security network ie, or a vendor specific information element 
+ *	that vendors will use to identify the path selection methods and 
+ *	metrics in use. 
+ * 
+ * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication 
+ *	daemon will be authenticating mesh candidates. 
+ * 
+ * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication 
+ *	daemon will be securing peer link frames.  AMPE is a secured version of 
+ *	Mesh Peering Management (MPM) and is implemented with the assistance of 
+ *	a userspace daemon.  When this flag is set, the kernel will send peer 
+ *	management frames to a userspace daemon that will implement AMPE 
+ *	functionality (security capabilities selection, key confirmation, and 
+ *	key management).  When the flag is unset (default), the kernel can 
+ *	autonomously complete (unsecured) mesh peering without the need of a 
+ *	userspace daemon. 
+ * 
+ * @NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC: Enable this option to use a 
+ *	vendor specific synchronization method or disable it to use the default 
+ *	neighbor offset synchronization 
+ * 
+ * @NL80211_MESH_SETUP_USERSPACE_MPM: Enable this option if userspace will 
+ *	implement an MPM which handles peer allocation and state. 
+ * 
+ * @NL80211_MESH_SETUP_AUTH_PROTOCOL: Inform the kernel of the authentication 
+ *	method (u8, as defined in IEEE 8.4.2.100.6, e.g. 0x1 for SAE). 
+ *	Default is no authentication method required. 
+ * 
+ * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number 
+ * 
+ * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use 
+ */ 
+enum nl80211_mesh_setup_params { 
+	__NL80211_MESH_SETUP_INVALID, 
+	NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL, 
+	NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC, 
+	NL80211_MESH_SETUP_IE, 
+	NL80211_MESH_SETUP_USERSPACE_AUTH, 
+	NL80211_MESH_SETUP_USERSPACE_AMPE, 
+	NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC, 
+	NL80211_MESH_SETUP_USERSPACE_MPM, 
+	NL80211_MESH_SETUP_AUTH_PROTOCOL, 
+ 
+	/* keep last */ 
+	__NL80211_MESH_SETUP_ATTR_AFTER_LAST, 
+	NL80211_MESH_SETUP_ATTR_MAX = __NL80211_MESH_SETUP_ATTR_AFTER_LAST - 1 
+}; 
+ 
+/** 
+ * enum nl80211_txq_attr - TX queue parameter attributes 
+ * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved 
+ * @NL80211_TXQ_ATTR_AC: AC identifier (NL80211_AC_*) 
+ * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning 
+ *	disabled 
+ * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form 
+ *	2^n-1 in the range 1..32767] 
+ * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form 
+ *	2^n-1 in the range 1..32767] 
+ * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255] 
+ * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal 
+ * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number 
+ */ 
+enum nl80211_txq_attr { 
+	__NL80211_TXQ_ATTR_INVALID, 
+	NL80211_TXQ_ATTR_AC, 
+	NL80211_TXQ_ATTR_TXOP, 
+	NL80211_TXQ_ATTR_CWMIN, 
+	NL80211_TXQ_ATTR_CWMAX, 
+	NL80211_TXQ_ATTR_AIFS, 
+ 
+	/* keep last */ 
+	__NL80211_TXQ_ATTR_AFTER_LAST, 
+	NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1 
+}; 
+ 
+enum nl80211_ac { 
+	NL80211_AC_VO, 
+	NL80211_AC_VI, 
+	NL80211_AC_BE, 
+	NL80211_AC_BK, 
+	NL80211_NUM_ACS 
+}; 
+ 
+/* backward compat */ 
+#define NL80211_TXQ_ATTR_QUEUE	NL80211_TXQ_ATTR_AC 
+#define NL80211_TXQ_Q_VO	NL80211_AC_VO 
+#define NL80211_TXQ_Q_VI	NL80211_AC_VI 
+#define NL80211_TXQ_Q_BE	NL80211_AC_BE 
+#define NL80211_TXQ_Q_BK	NL80211_AC_BK 
+ 
+/** 
+ * enum nl80211_channel_type - channel type 
+ * @NL80211_CHAN_NO_HT: 20 MHz, non-HT channel 
+ * @NL80211_CHAN_HT20: 20 MHz HT channel 
+ * @NL80211_CHAN_HT40MINUS: HT40 channel, secondary channel 
+ *	below the control channel 
+ * @NL80211_CHAN_HT40PLUS: HT40 channel, secondary channel 
+ *	above the control channel 
+ */ 
+enum nl80211_channel_type { 
+	NL80211_CHAN_NO_HT, 
+	NL80211_CHAN_HT20, 
+	NL80211_CHAN_HT40MINUS, 
+	NL80211_CHAN_HT40PLUS 
+}; 
+ 
+/** 
+ * enum nl80211_key_mode - Key mode 
+ * 
+ * @NL80211_KEY_RX_TX: (Default) 
+ *	Key can be used for Rx and Tx immediately 
+ * 
+ * The following modes can only be selected for unicast keys and when the 
+ * driver supports @NL80211_EXT_FEATURE_EXT_KEY_ID: 
+ * 
+ * @NL80211_KEY_NO_TX: Only allowed in combination with @NL80211_CMD_NEW_KEY: 
+ *	Unicast key can only be used for Rx, Tx not allowed, yet 
+ * @NL80211_KEY_SET_TX: Only allowed in combination with @NL80211_CMD_SET_KEY: 
+ *	The unicast key identified by idx and mac is cleared for Tx and becomes 
+ *	the preferred Tx key for the station. 
+ */ 
+enum nl80211_key_mode { 
+	NL80211_KEY_RX_TX, 
+	NL80211_KEY_NO_TX, 
+	NL80211_KEY_SET_TX 
+}; 
+ 
+/** 
+ * enum nl80211_chan_width - channel width definitions 
+ * 
+ * These values are used with the %NL80211_ATTR_CHANNEL_WIDTH 
+ * attribute. 
+ * 
+ * @NL80211_CHAN_WIDTH_20_NOHT: 20 MHz, non-HT channel 
+ * @NL80211_CHAN_WIDTH_20: 20 MHz HT channel 
+ * @NL80211_CHAN_WIDTH_40: 40 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 
+ *	attribute must be provided as well 
+ * @NL80211_CHAN_WIDTH_80: 80 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 
+ *	attribute must be provided as well 
+ * @NL80211_CHAN_WIDTH_80P80: 80+80 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 
+ *	and %NL80211_ATTR_CENTER_FREQ2 attributes must be provided as well 
+ * @NL80211_CHAN_WIDTH_160: 160 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 
+ *	attribute must be provided as well 
+ * @NL80211_CHAN_WIDTH_5: 5 MHz OFDM channel 
+ * @NL80211_CHAN_WIDTH_10: 10 MHz OFDM channel 
+ */ 
+enum nl80211_chan_width { 
+	NL80211_CHAN_WIDTH_20_NOHT, 
+	NL80211_CHAN_WIDTH_20, 
+	NL80211_CHAN_WIDTH_40, 
+	NL80211_CHAN_WIDTH_80, 
+	NL80211_CHAN_WIDTH_80P80, 
+	NL80211_CHAN_WIDTH_160, 
+	NL80211_CHAN_WIDTH_5, 
+	NL80211_CHAN_WIDTH_10, 
+}; 
+ 
+/** 
+ * enum nl80211_bss_scan_width - control channel width for a BSS 
+ * 
+ * These values are used with the %NL80211_BSS_CHAN_WIDTH attribute. 
+ * 
+ * @NL80211_BSS_CHAN_WIDTH_20: control channel is 20 MHz wide or compatible 
+ * @NL80211_BSS_CHAN_WIDTH_10: control channel is 10 MHz wide 
+ * @NL80211_BSS_CHAN_WIDTH_5: control channel is 5 MHz wide 
+ */ 
+enum nl80211_bss_scan_width { 
+	NL80211_BSS_CHAN_WIDTH_20, 
+	NL80211_BSS_CHAN_WIDTH_10, 
+	NL80211_BSS_CHAN_WIDTH_5, 
+}; 
+ 
+/** 
+ * enum nl80211_bss - netlink attributes for a BSS 
+ * 
+ * @__NL80211_BSS_INVALID: invalid 
+ * @NL80211_BSS_BSSID: BSSID of the BSS (6 octets) 
+ * @NL80211_BSS_FREQUENCY: frequency in MHz (u32) 
+ * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64) 
+ *	(if @NL80211_BSS_PRESP_DATA is present then this is known to be 
+ *	from a probe response, otherwise it may be from the same beacon 
+ *	that the NL80211_BSS_BEACON_TSF will be from) 
+ * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16) 
+ * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16) 
+ * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the 
+ *	raw information elements from the probe response/beacon (bin); 
+ *	if the %NL80211_BSS_BEACON_IES attribute is present and the data is 
+ *	different then the IEs here are from a Probe Response frame; otherwise 
+ *	they are from a Beacon frame. 
+ *	However, if the driver does not indicate the source of the IEs, these 
+ *	IEs may be from either frame subtype. 
+ *	If present, the @NL80211_BSS_PRESP_DATA attribute indicates that the 
+ *	data here is known to be from a probe response, without any heuristics. 
+ * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon 
+ *	in mBm (100 * dBm) (s32) 
+ * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon 
+ *	in unspecified units, scaled to 0..100 (u8) 
+ * @NL80211_BSS_STATUS: status, if this BSS is "used" 
+ * @NL80211_BSS_SEEN_MS_AGO: age of this BSS entry in ms 
+ * @NL80211_BSS_BEACON_IES: binary attribute containing the raw information 
+ *	elements from a Beacon frame (bin); not present if no Beacon frame has 
+ *	yet been received 
+ * @NL80211_BSS_CHAN_WIDTH: channel width of the control channel 
+ *	(u32, enum nl80211_bss_scan_width) 
+ * @NL80211_BSS_BEACON_TSF: TSF of the last received beacon (u64) 
+ *	(not present if no beacon frame has been received yet) 
+ * @NL80211_BSS_PRESP_DATA: the data in @NL80211_BSS_INFORMATION_ELEMENTS and 
+ *	@NL80211_BSS_TSF is known to be from a probe response (flag attribute) 
+ * @NL80211_BSS_LAST_SEEN_BOOTTIME: CLOCK_BOOTTIME timestamp when this entry 
+ *	was last updated by a received frame. The value is expected to be 
+ *	accurate to about 10ms. (u64, nanoseconds) 
+ * @NL80211_BSS_PAD: attribute used for padding for 64-bit alignment 
+ * @NL80211_BSS_PARENT_TSF: the time at the start of reception of the first 
+ *	octet of the timestamp field of the last beacon/probe received for 
+ *	this BSS. The time is the TSF of the BSS specified by 
+ *	@NL80211_BSS_PARENT_BSSID. (u64). 
+ * @NL80211_BSS_PARENT_BSSID: the BSS according to which @NL80211_BSS_PARENT_TSF 
+ *	is set. 
+ * @NL80211_BSS_CHAIN_SIGNAL: per-chain signal strength of last BSS update. 
+ *	Contains a nested array of signal strength attributes (u8, dBm), 
+ *	using the nesting index as the antenna number. 
+ * @__NL80211_BSS_AFTER_LAST: internal 
+ * @NL80211_BSS_MAX: highest BSS attribute 
+ */ 
+enum nl80211_bss { 
+	__NL80211_BSS_INVALID, 
+	NL80211_BSS_BSSID, 
+	NL80211_BSS_FREQUENCY, 
+	NL80211_BSS_TSF, 
+	NL80211_BSS_BEACON_INTERVAL, 
+	NL80211_BSS_CAPABILITY, 
+	NL80211_BSS_INFORMATION_ELEMENTS, 
+	NL80211_BSS_SIGNAL_MBM, 
+	NL80211_BSS_SIGNAL_UNSPEC, 
+	NL80211_BSS_STATUS, 
+	NL80211_BSS_SEEN_MS_AGO, 
+	NL80211_BSS_BEACON_IES, 
+	NL80211_BSS_CHAN_WIDTH, 
+	NL80211_BSS_BEACON_TSF, 
+	NL80211_BSS_PRESP_DATA, 
+	NL80211_BSS_LAST_SEEN_BOOTTIME, 
+	NL80211_BSS_PAD, 
+	NL80211_BSS_PARENT_TSF, 
+	NL80211_BSS_PARENT_BSSID, 
+	NL80211_BSS_CHAIN_SIGNAL, 
+ 
+	/* keep last */ 
+	__NL80211_BSS_AFTER_LAST, 
+	NL80211_BSS_MAX = __NL80211_BSS_AFTER_LAST - 1 
+}; 
+ 
+/** 
+ * enum nl80211_bss_status - BSS "status" 
+ * @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS. 
+ *	Note that this is no longer used since cfg80211 no longer 
+ *	keeps track of whether or not authentication was done with 
+ *	a given BSS. 
+ * @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS. 
+ * @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS. 
+ * 
+ * The BSS status is a BSS attribute in scan dumps, which 
+ * indicates the status the interface has wrt. this BSS. 
+ */ 
+enum nl80211_bss_status { 
+	NL80211_BSS_STATUS_AUTHENTICATED, 
+	NL80211_BSS_STATUS_ASSOCIATED, 
+	NL80211_BSS_STATUS_IBSS_JOINED, 
+}; 
+ 
+/** 
+ * enum nl80211_auth_type - AuthenticationType 
+ * 
+ * @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication 
+ * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only) 
+ * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r) 
+ * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP) 
+ * @NL80211_AUTHTYPE_SAE: Simultaneous authentication of equals 
+ * @NL80211_AUTHTYPE_FILS_SK: Fast Initial Link Setup shared key 
+ * @NL80211_AUTHTYPE_FILS_SK_PFS: Fast Initial Link Setup shared key with PFS 
+ * @NL80211_AUTHTYPE_FILS_PK: Fast Initial Link Setup public key 
+ * @__NL80211_AUTHTYPE_NUM: internal 
+ * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm 
+ * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by 
+ *	trying multiple times); this is invalid in netlink -- leave out 
+ *	the attribute for this on CONNECT commands. 
+ */ 
+enum nl80211_auth_type { 
+	NL80211_AUTHTYPE_OPEN_SYSTEM, 
+	NL80211_AUTHTYPE_SHARED_KEY, 
+	NL80211_AUTHTYPE_FT, 
+	NL80211_AUTHTYPE_NETWORK_EAP, 
+	NL80211_AUTHTYPE_SAE, 
+	NL80211_AUTHTYPE_FILS_SK, 
+	NL80211_AUTHTYPE_FILS_SK_PFS, 
+	NL80211_AUTHTYPE_FILS_PK, 
+ 
+	/* keep last */ 
+	__NL80211_AUTHTYPE_NUM, 
+	NL80211_AUTHTYPE_MAX = __NL80211_AUTHTYPE_NUM - 1, 
+	NL80211_AUTHTYPE_AUTOMATIC 
+}; 
+ 
+/** 
+ * enum nl80211_key_type - Key Type 
+ * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key 
+ * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key 
+ * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS) 
+ * @NUM_NL80211_KEYTYPES: number of defined key types 
+ */ 
+enum nl80211_key_type { 
+	NL80211_KEYTYPE_GROUP, 
+	NL80211_KEYTYPE_PAIRWISE, 
+	NL80211_KEYTYPE_PEERKEY, 
+ 
+	NUM_NL80211_KEYTYPES 
+}; 
+ 
+/** 
+ * enum nl80211_mfp - Management frame protection state 
+ * @NL80211_MFP_NO: Management frame protection not used 
+ * @NL80211_MFP_REQUIRED: Management frame protection required 
+ * @NL80211_MFP_OPTIONAL: Management frame protection is optional 
+ */ 
+enum nl80211_mfp { 
+	NL80211_MFP_NO, 
+	NL80211_MFP_REQUIRED, 
+	NL80211_MFP_OPTIONAL, 
+}; 
+ 
+enum nl80211_wpa_versions { 
+	NL80211_WPA_VERSION_1 = 1 << 0, 
+	NL80211_WPA_VERSION_2 = 1 << 1, 
+	NL80211_WPA_VERSION_3 = 1 << 2, 
+}; 
+ 
+/** 
+ * enum nl80211_key_default_types - key default types 
+ * @__NL80211_KEY_DEFAULT_TYPE_INVALID: invalid 
+ * @NL80211_KEY_DEFAULT_TYPE_UNICAST: key should be used as default 
+ *	unicast key 
+ * @NL80211_KEY_DEFAULT_TYPE_MULTICAST: key should be used as default 
+ *	multicast key 
+ * @NUM_NL80211_KEY_DEFAULT_TYPES: number of default types 
+ */ 
+enum nl80211_key_default_types { 
+	__NL80211_KEY_DEFAULT_TYPE_INVALID, 
+	NL80211_KEY_DEFAULT_TYPE_UNICAST, 
+	NL80211_KEY_DEFAULT_TYPE_MULTICAST, 
+ 
+	NUM_NL80211_KEY_DEFAULT_TYPES 
+}; 
+ 
+/** 
+ * enum nl80211_key_attributes - key attributes 
+ * @__NL80211_KEY_INVALID: invalid 
+ * @NL80211_KEY_DATA: (temporal) key data; for TKIP this consists of 
+ *	16 bytes encryption key followed by 8 bytes each for TX and RX MIC 
+ *	keys 
+ * @NL80211_KEY_IDX: key ID (u8, 0-3) 
+ * @NL80211_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11 
+ *	section 7.3.2.25.1, e.g. 0x000FAC04) 
+ * @NL80211_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and 
+ *	CCMP keys, each six bytes in little endian 
+ * @NL80211_KEY_DEFAULT: flag indicating default key 
+ * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key 
+ * @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not 
+ *	specified the default depends on whether a MAC address was 
+ *	given with the command using the key or not (u32) 
+ * @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags 
+ *	attributes, specifying what a key should be set as default as. 
+ *	See &enum nl80211_key_default_types. 
+ * @NL80211_KEY_MODE: the mode from enum nl80211_key_mode. 
+ *	Defaults to @NL80211_KEY_RX_TX. 
+ * @NL80211_KEY_DEFAULT_BEACON: flag indicating default Beacon frame key 
+ * 
+ * @__NL80211_KEY_AFTER_LAST: internal 
+ * @NL80211_KEY_MAX: highest key attribute 
+ */ 
+enum nl80211_key_attributes { 
+	__NL80211_KEY_INVALID, 
+	NL80211_KEY_DATA, 
+	NL80211_KEY_IDX, 
+	NL80211_KEY_CIPHER, 
+	NL80211_KEY_SEQ, 
+	NL80211_KEY_DEFAULT, 
+	NL80211_KEY_DEFAULT_MGMT, 
+	NL80211_KEY_TYPE, 
+	NL80211_KEY_DEFAULT_TYPES, 
+	NL80211_KEY_MODE, 
+	NL80211_KEY_DEFAULT_BEACON, 
+ 
+	/* keep last */ 
+	__NL80211_KEY_AFTER_LAST, 
+	NL80211_KEY_MAX = __NL80211_KEY_AFTER_LAST - 1 
+}; 
+ 
+/** 
+ * enum nl80211_tx_rate_attributes - TX rate set attributes 
+ * @__NL80211_TXRATE_INVALID: invalid 
+ * @NL80211_TXRATE_LEGACY: Legacy (non-MCS) rates allowed for TX rate selection 
+ *	in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with 
+ *	1 = 500 kbps) but without the IE length restriction (at most 
+ *	%NL80211_MAX_SUPP_RATES in a single array). 
+ * @NL80211_TXRATE_HT: HT (MCS) rates allowed for TX rate selection 
+ *	in an array of MCS numbers. 
+ * @NL80211_TXRATE_VHT: VHT rates allowed for TX rate selection, 
+ *	see &struct nl80211_txrate_vht 
+ * @NL80211_TXRATE_GI: configure GI, see &enum nl80211_txrate_gi 
+ * @__NL80211_TXRATE_AFTER_LAST: internal 
+ * @NL80211_TXRATE_MAX: highest TX rate attribute 
+ */ 
+enum nl80211_tx_rate_attributes { 
+	__NL80211_TXRATE_INVALID, 
+	NL80211_TXRATE_LEGACY, 
+	NL80211_TXRATE_HT, 
+	NL80211_TXRATE_VHT, 
+	NL80211_TXRATE_GI, 
+ 
+	/* keep last */ 
+	__NL80211_TXRATE_AFTER_LAST, 
+	NL80211_TXRATE_MAX = __NL80211_TXRATE_AFTER_LAST - 1 
+}; 
+ 
+#define NL80211_TXRATE_MCS NL80211_TXRATE_HT 
+#define NL80211_VHT_NSS_MAX		8 
+ 
+/** 
+ * struct nl80211_txrate_vht - VHT MCS/NSS txrate bitmap 
+ * @mcs: MCS bitmap table for each NSS (array index 0 for 1 stream, etc.) 
+ */ 
+struct nl80211_txrate_vht { 
+	__u16 mcs[NL80211_VHT_NSS_MAX]; 
+}; 
+ 
+enum nl80211_txrate_gi { 
+	NL80211_TXRATE_DEFAULT_GI, 
+	NL80211_TXRATE_FORCE_SGI, 
+	NL80211_TXRATE_FORCE_LGI, 
+}; 
+ 
+/** 
+ * enum nl80211_band - Frequency band 
+ * @NL80211_BAND_2GHZ: 2.4 GHz ISM band 
+ * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz) 
+ * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 69.12 GHz) 
+ * @NL80211_BAND_6GHZ: around 6 GHz band (5.9 - 7.2 GHz) 
+ * @NUM_NL80211_BANDS: number of bands, avoid using this in userspace 
+ *	since newer kernel versions may support more bands 
+ */ 
+enum nl80211_band { 
+	NL80211_BAND_2GHZ, 
+	NL80211_BAND_5GHZ, 
+	NL80211_BAND_60GHZ, 
+	NL80211_BAND_6GHZ, 
+ 
+	NUM_NL80211_BANDS, 
+}; 
+ 
+/** 
+ * enum nl80211_ps_state - powersave state 
+ * @NL80211_PS_DISABLED: powersave is disabled 
+ * @NL80211_PS_ENABLED: powersave is enabled 
+ */ 
+enum nl80211_ps_state { 
+	NL80211_PS_DISABLED, 
+	NL80211_PS_ENABLED, 
+}; 
+ 
+/** 
+ * enum nl80211_attr_cqm - connection quality monitor attributes 
+ * @__NL80211_ATTR_CQM_INVALID: invalid 
+ * @NL80211_ATTR_CQM_RSSI_THOLD: RSSI threshold in dBm. This value specifies 
+ *	the threshold for the RSSI level at which an event will be sent. Zero 
+ *	to disable.  Alternatively, if %NL80211_EXT_FEATURE_CQM_RSSI_LIST is 
+ *	set, multiple values can be supplied as a low-to-high sorted array of 
+ *	threshold values in dBm.  Events will be sent when the RSSI value 
+ *	crosses any of the thresholds. 
+ * @NL80211_ATTR_CQM_RSSI_HYST: RSSI hysteresis in dBm. This value specifies 
+ *	the minimum amount the RSSI level must change after an event before a 
+ *	new event may be issued (to reduce effects of RSSI oscillation). 
+ * @NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT: RSSI threshold event 
+ * @NL80211_ATTR_CQM_PKT_LOSS_EVENT: a u32 value indicating that this many 
+ *	consecutive packets were not acknowledged by the peer 
+ * @NL80211_ATTR_CQM_TXE_RATE: TX error rate in %. Minimum % of TX failures 
+ *	during the given %NL80211_ATTR_CQM_TXE_INTVL before an 
+ *	%NL80211_CMD_NOTIFY_CQM with reported %NL80211_ATTR_CQM_TXE_RATE and 
+ *	%NL80211_ATTR_CQM_TXE_PKTS is generated. 
+ * @NL80211_ATTR_CQM_TXE_PKTS: number of attempted packets in a given 
+ *	%NL80211_ATTR_CQM_TXE_INTVL before %NL80211_ATTR_CQM_TXE_RATE is 
+ *	checked. 
+ * @NL80211_ATTR_CQM_TXE_INTVL: interval in seconds. Specifies the periodic 
+ *	interval in which %NL80211_ATTR_CQM_TXE_PKTS and 
+ *	%NL80211_ATTR_CQM_TXE_RATE must be satisfied before generating an 
+ *	%NL80211_CMD_NOTIFY_CQM. Set to 0 to turn off TX error reporting. 
+ * @NL80211_ATTR_CQM_BEACON_LOSS_EVENT: flag attribute that's set in a beacon 
+ *	loss event 
+ * @NL80211_ATTR_CQM_RSSI_LEVEL: the RSSI value in dBm that triggered the 
+ *	RSSI threshold event. 
+ * @__NL80211_ATTR_CQM_AFTER_LAST: internal 
+ * @NL80211_ATTR_CQM_MAX: highest key attribute 
+ */ 
+enum nl80211_attr_cqm { 
+	__NL80211_ATTR_CQM_INVALID, 
+	NL80211_ATTR_CQM_RSSI_THOLD, 
+	NL80211_ATTR_CQM_RSSI_HYST, 
+	NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT, 
+	NL80211_ATTR_CQM_PKT_LOSS_EVENT, 
+	NL80211_ATTR_CQM_TXE_RATE, 
+	NL80211_ATTR_CQM_TXE_PKTS, 
+	NL80211_ATTR_CQM_TXE_INTVL, 
+	NL80211_ATTR_CQM_BEACON_LOSS_EVENT, 
+	NL80211_ATTR_CQM_RSSI_LEVEL, 
+ 
+	/* keep last */ 
+	__NL80211_ATTR_CQM_AFTER_LAST, 
+	NL80211_ATTR_CQM_MAX = __NL80211_ATTR_CQM_AFTER_LAST - 1 
+}; 
+ 
+/** 
+ * enum nl80211_cqm_rssi_threshold_event - RSSI threshold event 
+ * @NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW: The RSSI level is lower than the 
+ *      configured threshold 
+ * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the 
+ *      configured threshold 
+ * @NL80211_CQM_RSSI_BEACON_LOSS_EVENT: (reserved, never sent) 
+ */ 
+enum nl80211_cqm_rssi_threshold_event { 
+	NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW, 
+	NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH, 
+	NL80211_CQM_RSSI_BEACON_LOSS_EVENT, 
+}; 
+ 
+ 
+/** 
+ * enum nl80211_tx_power_setting - TX power adjustment 
+ * @NL80211_TX_POWER_AUTOMATIC: automatically determine transmit power 
+ * @NL80211_TX_POWER_LIMITED: limit TX power by the mBm parameter 
+ * @NL80211_TX_POWER_FIXED: fix TX power to the mBm parameter 
+ */ 
+enum nl80211_tx_power_setting { 
+	NL80211_TX_POWER_AUTOMATIC, 
+	NL80211_TX_POWER_LIMITED, 
+	NL80211_TX_POWER_FIXED, 
+}; 
+ 
+/** 
+ * enum nl80211_tid_config - TID config state 
+ * @NL80211_TID_CONFIG_ENABLE: Enable config for the TID 
+ * @NL80211_TID_CONFIG_DISABLE: Disable config for the TID 
+ */ 
+enum nl80211_tid_config { 
+	NL80211_TID_CONFIG_ENABLE, 
+	NL80211_TID_CONFIG_DISABLE, 
+}; 
+ 
+/* enum nl80211_tid_config_attr - TID specific configuration. 
+ * @NL80211_TID_CONFIG_ATTR_PAD: pad attribute for 64-bit values 
+ * @NL80211_TID_CONFIG_ATTR_VIF_SUPP: a bitmap (u64) of attributes supported 
+ *	for per-vif configuration; doesn't list the ones that are generic 
+ *	(%NL80211_TID_CONFIG_ATTR_TIDS, %NL80211_TID_CONFIG_ATTR_OVERRIDE). 
+ * @NL80211_TID_CONFIG_ATTR_PEER_SUPP: same as the previous per-vif one, but 
+ *	per peer instead. 
+ * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribue, if no peer 
+ *	is selected, if set indicates that the new configuration overrides 
+ *	all previous peer configurations, otherwise previous peer specific 
+ *	configurations should be left untouched. If peer is selected then 
+ *	it will reset particular TID configuration of that peer and it will 
+ *	not accept other TID config attributes along with peer. 
+ * @NL80211_TID_CONFIG_ATTR_TIDS: a bitmask value of TIDs (bit 0 to 7) 
+ *	Its type is u16. 
+ * @NL80211_TID_CONFIG_ATTR_NOACK: Configure ack policy for the TID. 
+ *	specified in %NL80211_TID_CONFIG_ATTR_TID. see %enum nl80211_tid_config. 
+ *	Its type is u8. 
+ * @NL80211_TID_CONFIG_ATTR_RETRY_SHORT: Number of retries used with data frame 
+ *	transmission, user-space sets this configuration in 
+ *	&NL80211_CMD_SET_TID_CONFIG. It is u8 type, min value is 1 and 
+ *	the max value is advertised by the driver in this attribute on 
+ *	output in wiphy capabilities. 
+ * @NL80211_TID_CONFIG_ATTR_RETRY_LONG: Number of retries used with data frame 
+ *	transmission, user-space sets this configuration in 
+ *	&NL80211_CMD_SET_TID_CONFIG. Its type is u8, min value is 1 and 
+ *	the max value is advertised by the driver in this attribute on 
+ *	output in wiphy capabilities. 
+ * @NL80211_TID_CONFIG_ATTR_AMPDU_CTRL: Enable/Disable aggregation for the TIDs 
+ *	specified in %NL80211_TID_CONFIG_ATTR_TIDS. Its type is u8, using 
+ *	the values from &nl80211_tid_config. 
+ * @NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL: Enable/Disable RTS_CTS for the TIDs 
+ *	specified in %NL80211_TID_CONFIG_ATTR_TIDS. It is u8 type, using 
+ *	the values from &nl80211_tid_config. 
+ */ 
+enum nl80211_tid_config_attr { 
+	__NL80211_TID_CONFIG_ATTR_INVALID, 
+	NL80211_TID_CONFIG_ATTR_PAD, 
+	NL80211_TID_CONFIG_ATTR_VIF_SUPP, 
+	NL80211_TID_CONFIG_ATTR_PEER_SUPP, 
+	NL80211_TID_CONFIG_ATTR_OVERRIDE, 
+	NL80211_TID_CONFIG_ATTR_TIDS, 
+	NL80211_TID_CONFIG_ATTR_NOACK, 
+	NL80211_TID_CONFIG_ATTR_RETRY_SHORT, 
+	NL80211_TID_CONFIG_ATTR_RETRY_LONG, 
+	NL80211_TID_CONFIG_ATTR_AMPDU_CTRL, 
+	NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL, 
+ 
+	/* keep last */ 
+	__NL80211_TID_CONFIG_ATTR_AFTER_LAST, 
+	NL80211_TID_CONFIG_ATTR_MAX = __NL80211_TID_CONFIG_ATTR_AFTER_LAST - 1 
+}; 
+ 
+/** 
+ * enum nl80211_packet_pattern_attr - packet pattern attribute 
+ * @__NL80211_PKTPAT_INVALID: invalid number for nested attribute 
+ * @NL80211_PKTPAT_PATTERN: the pattern, values where the mask has 
+ *	a zero bit are ignored 
+ * @NL80211_PKTPAT_MASK: pattern mask, must be long enough to have 
+ *	a bit for each byte in the pattern. The lowest-order bit corresponds 
+ *	to the first byte of the pattern, but the bytes of the pattern are 
+ *	in a little-endian-like format, i.e. the 9th byte of the pattern 
+ *	corresponds to the lowest-order bit in the second byte of the mask. 
+ *	For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where 
+ *	xx indicates "don't care") would be represented by a pattern of 
+ *	twelve zero bytes, and a mask of "0xed,0x01". 
+ *	Note that the pattern matching is done as though frames were not 
+ *	802.11 frames but 802.3 frames, i.e. the frame is fully unpacked 
+ *	first (including SNAP header unpacking) and then matched. 
+ * @NL80211_PKTPAT_OFFSET: packet offset, pattern is matched after 
+ *	these fixed number of bytes of received packet 
+ * @NUM_NL80211_PKTPAT: number of attributes 
+ * @MAX_NL80211_PKTPAT: max attribute number 
+ */ 
+enum nl80211_packet_pattern_attr { 
+	__NL80211_PKTPAT_INVALID, 
+	NL80211_PKTPAT_MASK, 
+	NL80211_PKTPAT_PATTERN, 
+	NL80211_PKTPAT_OFFSET, 
+ 
+	NUM_NL80211_PKTPAT, 
+	MAX_NL80211_PKTPAT = NUM_NL80211_PKTPAT - 1, 
+}; 
+ 
+/** 
+ * struct nl80211_pattern_support - packet pattern support information 
+ * @max_patterns: maximum number of patterns supported 
+ * @min_pattern_len: minimum length of each pattern 
+ * @max_pattern_len: maximum length of each pattern 
+ * @max_pkt_offset: maximum Rx packet offset 
+ * 
+ * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when 
+ * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED or in 
+ * %NL80211_ATTR_COALESCE_RULE_PKT_PATTERN when that is part of 
+ * %NL80211_ATTR_COALESCE_RULE in the capability information given 
+ * by the kernel to userspace. 
+ */ 
+struct nl80211_pattern_support { 
+	__u32 max_patterns; 
+	__u32 min_pattern_len; 
+	__u32 max_pattern_len; 
+	__u32 max_pkt_offset; 
+} __attribute__((packed)); 
+ 
+/* only for backward compatibility */ 
+#define __NL80211_WOWLAN_PKTPAT_INVALID __NL80211_PKTPAT_INVALID 
+#define NL80211_WOWLAN_PKTPAT_MASK NL80211_PKTPAT_MASK 
+#define NL80211_WOWLAN_PKTPAT_PATTERN NL80211_PKTPAT_PATTERN 
+#define NL80211_WOWLAN_PKTPAT_OFFSET NL80211_PKTPAT_OFFSET 
+#define NUM_NL80211_WOWLAN_PKTPAT NUM_NL80211_PKTPAT 
+#define MAX_NL80211_WOWLAN_PKTPAT MAX_NL80211_PKTPAT 
+#define nl80211_wowlan_pattern_support nl80211_pattern_support 
+ 
+/** 
+ * enum nl80211_wowlan_triggers - WoWLAN trigger definitions 
+ * @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes 
+ * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put 
+ *	the chip into a special state -- works best with chips that have 
+ *	support for low-power operation already (flag) 
+ *	Note that this mode is incompatible with all of the others, if 
+ *	any others are even supported by the device. 
+ * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect 
+ *	is detected is implementation-specific (flag) 
+ * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed 
+ *	by 16 repetitions of MAC addr, anywhere in payload) (flag) 
+ * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns 
+ *	which are passed in an array of nested attributes, each nested attribute 
+ *	defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern. 
+ *	Each pattern defines a wakeup packet. Packet offset is associated with 
+ *	each pattern which is used while matching the pattern. The matching is 
+ *	done on the MSDU, i.e. as though the packet was an 802.3 packet, so the 
+ *	pattern matching is done after the packet is converted to the MSDU. 
+ * 
+ *	In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute 
+ *	carrying a &struct nl80211_pattern_support. 
+ * 
+ *	When reporting wakeup. it is a u32 attribute containing the 0-based 
+ *	index of the pattern that caused the wakeup, in the patterns passed 
+ *	to the kernel when configuring. 
+ * @NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED: Not a real trigger, and cannot be 
+ *	used when setting, used only to indicate that GTK rekeying is supported 
+ *	by the device (flag) 
+ * @NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE: wake up on GTK rekey failure (if 
+ *	done by the device) (flag) 
+ * @NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST: wake up on EAP Identity Request 
+ *	packet (flag) 
+ * @NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE: wake up on 4-way handshake (flag) 
+ * @NL80211_WOWLAN_TRIG_RFKILL_RELEASE: wake up when rfkill is released 
+ *	(on devices that have rfkill in the device) (flag) 
+ * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211: For wakeup reporting only, contains 
+ *	the 802.11 packet that caused the wakeup, e.g. a deauth frame. The frame 
+ *	may be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN 
+ *	attribute contains the original length. 
+ * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN: Original length of the 802.11 
+ *	packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211 
+ *	attribute if the packet was truncated somewhere. 
+ * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023: For wakeup reporting only, contains the 
+ *	802.11 packet that caused the wakeup, e.g. a magic packet. The frame may 
+ *	be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN attribute 
+ *	contains the original length. 
+ * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN: Original length of the 802.3 
+ *	packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023 
+ *	attribute if the packet was truncated somewhere. 
+ * @NL80211_WOWLAN_TRIG_TCP_CONNECTION: TCP connection wake, see DOC section 
+ *	"TCP connection wakeup" for more details. This is a nested attribute 
+ *	containing the exact information for establishing and keeping alive 
+ *	the TCP connection. 
+ * @NL80211_WOWLAN_TRIG_TCP_WAKEUP_MATCH: For wakeup reporting only, the 
+ *	wakeup packet was received on the TCP connection 
+ * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST: For wakeup reporting only, the 
+ *	TCP connection was lost or failed to be established 
+ * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS: For wakeup reporting only, 
+ *	the TCP connection ran out of tokens to use for data to send to the 
+ *	service 
+ * @NL80211_WOWLAN_TRIG_NET_DETECT: wake up when a configured network 
+ *	is detected.  This is a nested attribute that contains the 
+ *	same attributes used with @NL80211_CMD_START_SCHED_SCAN.  It 
+ *	specifies how the scan is performed (e.g. the interval, the 
+ *	channels to scan and the initial delay) as well as the scan 
+ *	results that will trigger a wake (i.e. the matchsets).  This 
+ *	attribute is also sent in a response to 
+ *	@NL80211_CMD_GET_WIPHY, indicating the number of match sets 
+ *	supported by the driver (u32). 
+ * @NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS: nested attribute 
+ *	containing an array with information about what triggered the 
+ *	wake up.  If no elements are present in the array, it means 
+ *	that the information is not available.  If more than one 
+ *	element is present, it means that more than one match 
+ *	occurred. 
+ *	Each element in the array is a nested attribute that contains 
+ *	one optional %NL80211_ATTR_SSID attribute and one optional 
+ *	%NL80211_ATTR_SCAN_FREQUENCIES attribute.  At least one of 
+ *	these attributes must be present.  If 
+ *	%NL80211_ATTR_SCAN_FREQUENCIES contains more than one 
+ *	frequency, it means that the match occurred in more than one 
+ *	channel. 
+ * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers 
+ * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number 
+ * 
+ * These nested attributes are used to configure the wakeup triggers and 
+ * to report the wakeup reason(s). 
+ */ 
+enum nl80211_wowlan_triggers { 
+	__NL80211_WOWLAN_TRIG_INVALID, 
+	NL80211_WOWLAN_TRIG_ANY, 
+	NL80211_WOWLAN_TRIG_DISCONNECT, 
+	NL80211_WOWLAN_TRIG_MAGIC_PKT, 
+	NL80211_WOWLAN_TRIG_PKT_PATTERN, 
+	NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED, 
+	NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE, 
+	NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST, 
+	NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE, 
+	NL80211_WOWLAN_TRIG_RFKILL_RELEASE, 
+	NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211, 
+	NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN, 
+	NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023, 
+	NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN, 
+	NL80211_WOWLAN_TRIG_TCP_CONNECTION, 
+	NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH, 
+	NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST, 
+	NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS, 
+	NL80211_WOWLAN_TRIG_NET_DETECT, 
+	NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS, 
+ 
+	/* keep last */ 
+	NUM_NL80211_WOWLAN_TRIG, 
+	MAX_NL80211_WOWLAN_TRIG = NUM_NL80211_WOWLAN_TRIG - 1 
+}; 
+ 
+/** 
+ * DOC: TCP connection wakeup 
+ * 
+ * Some devices can establish a TCP connection in order to be woken up by a 
+ * packet coming in from outside their network segment, or behind NAT. If 
+ * configured, the device will establish a TCP connection to the given 
+ * service, and periodically send data to that service. The first data 
+ * packet is usually transmitted after SYN/ACK, also ACKing the SYN/ACK. 
+ * The data packets can optionally include a (little endian) sequence 
+ * number (in the TCP payload!) that is generated by the device, and, also 
+ * optionally, a token from a list of tokens. This serves as a keep-alive 
+ * with the service, and for NATed connections, etc. 
+ * 
+ * During this keep-alive period, the server doesn't send any data to the 
+ * client. When receiving data, it is compared against the wakeup pattern 
+ * (and mask) and if it matches, the host is woken up. Similarly, if the 
+ * connection breaks or cannot be established to start with, the host is 
+ * also woken up. 
+ * 
+ * Developer's note: ARP offload is required for this, otherwise TCP 
+ * response packets might not go through correctly. 
+ */ 
+ 
+/** 
+ * struct nl80211_wowlan_tcp_data_seq - WoWLAN TCP data sequence 
+ * @start: starting value 
+ * @offset: offset of sequence number in packet 
+ * @len: length of the sequence value to write, 1 through 4 
+ * 
+ * Note: don't confuse with the TCP sequence number(s), this is for the 
+ * keepalive packet payload. The actual value is written into the packet 
+ * in little endian. 
+ */ 
+struct nl80211_wowlan_tcp_data_seq { 
+	__u32 start, offset, len; 
+}; 
+ 
+/** 
+ * struct nl80211_wowlan_tcp_data_token - WoWLAN TCP data token config 
+ * @offset: offset of token in packet 
+ * @len: length of each token 
+ * @token_stream: stream of data to be used for the tokens, the length must 
+ *	be a multiple of @len for this to make sense 
+ */ 
+struct nl80211_wowlan_tcp_data_token { 
+	__u32 offset, len; 
+	__u8 token_stream[]; 
+}; 
+ 
+/** 
+ * struct nl80211_wowlan_tcp_data_token_feature - data token features 
+ * @min_len: minimum token length 
+ * @max_len: maximum token length 
+ * @bufsize: total available token buffer size (max size of @token_stream) 
+ */ 
+struct nl80211_wowlan_tcp_data_token_feature { 
+	__u32 min_len, max_len, bufsize; 
+}; 
+ 
+/** 
+ * enum nl80211_wowlan_tcp_attrs - WoWLAN TCP connection parameters 
+ * @__NL80211_WOWLAN_TCP_INVALID: invalid number for nested attributes 
+ * @NL80211_WOWLAN_TCP_SRC_IPV4: source IPv4 address (in network byte order) 
+ * @NL80211_WOWLAN_TCP_DST_IPV4: destination IPv4 address 
+ *	(in network byte order) 
+ * @NL80211_WOWLAN_TCP_DST_MAC: destination MAC address, this is given because 
+ *	route lookup when configured might be invalid by the time we suspend, 
+ *	and doing a route lookup when suspending is no longer possible as it 
+ *	might require ARP querying. 
+ * @NL80211_WOWLAN_TCP_SRC_PORT: source port (u16); optional, if not given a 
+ *	socket and port will be allocated 
+ * @NL80211_WOWLAN_TCP_DST_PORT: destination port (u16) 
+ * @NL80211_WOWLAN_TCP_DATA_PAYLOAD: data packet payload, at least one byte. 
+ *	For feature advertising, a u32 attribute holding the maximum length 
+ *	of the data payload. 
+ * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ: data packet sequence configuration 
+ *	(if desired), a &struct nl80211_wowlan_tcp_data_seq. For feature 
+ *	advertising it is just a flag 
+ * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN: data packet token configuration, 
+ *	see &struct nl80211_wowlan_tcp_data_token and for advertising see 
+ *	&struct nl80211_wowlan_tcp_data_token_feature. 
+ * @NL80211_WOWLAN_TCP_DATA_INTERVAL: data interval in seconds, maximum 
+ *	interval in feature advertising (u32) 
+ * @NL80211_WOWLAN_TCP_WAKE_PAYLOAD: wake packet payload, for advertising a 
+ *	u32 attribute holding the maximum length 
+ * @NL80211_WOWLAN_TCP_WAKE_MASK: Wake packet payload mask, not used for 
+ *	feature advertising. The mask works like @NL80211_PKTPAT_MASK 
+ *	but on the TCP payload only. 
+ * @NUM_NL80211_WOWLAN_TCP: number of TCP attributes 
+ * @MAX_NL80211_WOWLAN_TCP: highest attribute number 
+ */ 
+enum nl80211_wowlan_tcp_attrs { 
+	__NL80211_WOWLAN_TCP_INVALID, 
+	NL80211_WOWLAN_TCP_SRC_IPV4, 
+	NL80211_WOWLAN_TCP_DST_IPV4, 
+	NL80211_WOWLAN_TCP_DST_MAC, 
+	NL80211_WOWLAN_TCP_SRC_PORT, 
+	NL80211_WOWLAN_TCP_DST_PORT, 
+	NL80211_WOWLAN_TCP_DATA_PAYLOAD, 
+	NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ, 
+	NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN, 
+	NL80211_WOWLAN_TCP_DATA_INTERVAL, 
+	NL80211_WOWLAN_TCP_WAKE_PAYLOAD, 
+	NL80211_WOWLAN_TCP_WAKE_MASK, 
+ 
+	/* keep last */ 
+	NUM_NL80211_WOWLAN_TCP, 
+	MAX_NL80211_WOWLAN_TCP = NUM_NL80211_WOWLAN_TCP - 1 
+}; 
+ 
+/** 
+ * struct nl80211_coalesce_rule_support - coalesce rule support information 
+ * @max_rules: maximum number of rules supported 
+ * @pat: packet pattern support information 
+ * @max_delay: maximum supported coalescing delay in msecs 
+ * 
+ * This struct is carried in %NL80211_ATTR_COALESCE_RULE in the 
+ * capability information given by the kernel to userspace. 
+ */ 
+struct nl80211_coalesce_rule_support { 
+	__u32 max_rules; 
+	struct nl80211_pattern_support pat; 
+	__u32 max_delay; 
+} __attribute__((packed)); 
+ 
+/** 
+ * enum nl80211_attr_coalesce_rule - coalesce rule attribute 
+ * @__NL80211_COALESCE_RULE_INVALID: invalid number for nested attribute 
+ * @NL80211_ATTR_COALESCE_RULE_DELAY: delay in msecs used for packet coalescing 
+ * @NL80211_ATTR_COALESCE_RULE_CONDITION: condition for packet coalescence, 
+ *	see &enum nl80211_coalesce_condition. 
+ * @NL80211_ATTR_COALESCE_RULE_PKT_PATTERN: packet offset, pattern is matched 
+ *	after these fixed number of bytes of received packet 
+ * @NUM_NL80211_ATTR_COALESCE_RULE: number of attributes 
+ * @NL80211_ATTR_COALESCE_RULE_MAX: max attribute number 
+ */ 
+enum nl80211_attr_coalesce_rule { 
+	__NL80211_COALESCE_RULE_INVALID, 
+	NL80211_ATTR_COALESCE_RULE_DELAY, 
+	NL80211_ATTR_COALESCE_RULE_CONDITION, 
+	NL80211_ATTR_COALESCE_RULE_PKT_PATTERN, 
+ 
+	/* keep last */ 
+	NUM_NL80211_ATTR_COALESCE_RULE, 
+	NL80211_ATTR_COALESCE_RULE_MAX = NUM_NL80211_ATTR_COALESCE_RULE - 1 
+}; 
+ 
+/** 
+ * enum nl80211_coalesce_condition - coalesce rule conditions 
+ * @NL80211_COALESCE_CONDITION_MATCH: coalaesce Rx packets when patterns 
+ *	in a rule are matched. 
+ * @NL80211_COALESCE_CONDITION_NO_MATCH: coalesce Rx packets when patterns 
+ *	in a rule are not matched. 
+ */ 
+enum nl80211_coalesce_condition { 
+	NL80211_COALESCE_CONDITION_MATCH, 
+	NL80211_COALESCE_CONDITION_NO_MATCH 
+}; 
+ 
+/** 
+ * enum nl80211_iface_limit_attrs - limit attributes 
+ * @NL80211_IFACE_LIMIT_UNSPEC: (reserved) 
+ * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that 
+ *	can be chosen from this set of interface types (u32) 
+ * @NL80211_IFACE_LIMIT_TYPES: nested attribute containing a 
+ *	flag attribute for each interface type in this set 
+ * @NUM_NL80211_IFACE_LIMIT: number of attributes 
+ * @MAX_NL80211_IFACE_LIMIT: highest attribute number 
+ */ 
+enum nl80211_iface_limit_attrs { 
+	NL80211_IFACE_LIMIT_UNSPEC, 
+	NL80211_IFACE_LIMIT_MAX, 
+	NL80211_IFACE_LIMIT_TYPES, 
+ 
+	/* keep last */ 
+	NUM_NL80211_IFACE_LIMIT, 
+	MAX_NL80211_IFACE_LIMIT = NUM_NL80211_IFACE_LIMIT - 1 
+}; 
+ 
+/** 
+ * enum nl80211_if_combination_attrs -- interface combination attributes 
+ * 
+ * @NL80211_IFACE_COMB_UNSPEC: (reserved) 
+ * @NL80211_IFACE_COMB_LIMITS: Nested attributes containing the limits 
+ *	for given interface types, see &enum nl80211_iface_limit_attrs. 
+ * @NL80211_IFACE_COMB_MAXNUM: u32 attribute giving the total number of 
+ *	interfaces that can be created in this group. This number doesn't 
+ *	apply to interfaces purely managed in software, which are listed 
+ *	in a separate attribute %NL80211_ATTR_INTERFACES_SOFTWARE. 
+ * @NL80211_IFACE_COMB_STA_AP_BI_MATCH: flag attribute specifying that 
+ *	beacon intervals within this group must be all the same even for 
+ *	infrastructure and AP/GO combinations, i.e. the GO(s) must adopt 
+ *	the infrastructure network's beacon interval. 
+ * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many 
+ *	different channels may be used within this group. 
+ * @NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS: u32 attribute containing the bitmap 
+ *	of supported channel widths for radar detection. 
+ * @NL80211_IFACE_COMB_RADAR_DETECT_REGIONS: u32 attribute containing the bitmap 
+ *	of supported regulatory regions for radar detection. 
+ * @NL80211_IFACE_COMB_BI_MIN_GCD: u32 attribute specifying the minimum GCD of 
+ *	different beacon intervals supported by all the interface combinations 
+ *	in this group (if not present, all beacon intervals be identical). 
+ * @NUM_NL80211_IFACE_COMB: number of attributes 
+ * @MAX_NL80211_IFACE_COMB: highest attribute number 
+ * 
+ * Examples: 
+ *	limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2 
+ *	=> allows an AP and a STA that must match BIs 
+ * 
+ *	numbers = [ #{AP, P2P-GO} <= 8 ], BI min gcd, channels = 1, max = 8, 
+ *	=> allows 8 of AP/GO that can have BI gcd >= min gcd 
+ * 
+ *	numbers = [ #{STA} <= 2 ], channels = 2, max = 2 
+ *	=> allows two STAs on different channels 
+ * 
+ *	numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4 
+ *	=> allows a STA plus three P2P interfaces 
+ * 
+ * The list of these four possibilities could completely be contained 
+ * within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate 
+ * that any of these groups must match. 
+ * 
+ * "Combinations" of just a single interface will not be listed here, 
+ * a single interface of any valid interface type is assumed to always 
+ * be possible by itself. This means that implicitly, for each valid 
+ * interface type, the following group always exists: 
+ *	numbers = [ #{<type>} <= 1 ], channels = 1, max = 1 
+ */ 
+enum nl80211_if_combination_attrs { 
+	NL80211_IFACE_COMB_UNSPEC, 
+	NL80211_IFACE_COMB_LIMITS, 
+	NL80211_IFACE_COMB_MAXNUM, 
+	NL80211_IFACE_COMB_STA_AP_BI_MATCH, 
+	NL80211_IFACE_COMB_NUM_CHANNELS, 
+	NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS, 
+	NL80211_IFACE_COMB_RADAR_DETECT_REGIONS, 
+	NL80211_IFACE_COMB_BI_MIN_GCD, 
+ 
+	/* keep last */ 
+	NUM_NL80211_IFACE_COMB, 
+	MAX_NL80211_IFACE_COMB = NUM_NL80211_IFACE_COMB - 1 
+}; 
+ 
+ 
+/** 
+ * enum nl80211_plink_state - state of a mesh peer link finite state machine 
+ * 
+ * @NL80211_PLINK_LISTEN: initial state, considered the implicit 
+ *	state of non existent mesh peer links 
+ * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to 
+ *	this mesh peer 
+ * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received 
+ *	from this mesh peer 
+ * @NL80211_PLINK_CNF_RCVD: mesh plink confirm frame has been 
+ *	received from this mesh peer 
+ * @NL80211_PLINK_ESTAB: mesh peer link is established 
+ * @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled 
+ * @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh 
+ *	plink are discarded 
+ * @NUM_NL80211_PLINK_STATES: number of peer link states 
+ * @MAX_NL80211_PLINK_STATES: highest numerical value of plink states 
+ */ 
+enum nl80211_plink_state { 
+	NL80211_PLINK_LISTEN, 
+	NL80211_PLINK_OPN_SNT, 
+	NL80211_PLINK_OPN_RCVD, 
+	NL80211_PLINK_CNF_RCVD, 
+	NL80211_PLINK_ESTAB, 
+	NL80211_PLINK_HOLDING, 
+	NL80211_PLINK_BLOCKED, 
+ 
+	/* keep last */ 
+	NUM_NL80211_PLINK_STATES, 
+	MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1 
+}; 
+ 
+/** 
+ * enum nl80211_plink_action - actions to perform in mesh peers 
+ * 
+ * @NL80211_PLINK_ACTION_NO_ACTION: perform no action 
+ * @NL80211_PLINK_ACTION_OPEN: start mesh peer link establishment 
+ * @NL80211_PLINK_ACTION_BLOCK: block traffic from this mesh peer 
+ * @NUM_NL80211_PLINK_ACTIONS: number of possible actions 
+ */ 
+enum plink_actions { 
+	NL80211_PLINK_ACTION_NO_ACTION, 
+	NL80211_PLINK_ACTION_OPEN, 
+	NL80211_PLINK_ACTION_BLOCK, 
+ 
+	NUM_NL80211_PLINK_ACTIONS, 
+}; 
+ 
+ 
+#define NL80211_KCK_LEN			16 
+#define NL80211_KEK_LEN			16 
+#define NL80211_REPLAY_CTR_LEN		8 
+ 
+/** 
+ * enum nl80211_rekey_data - attributes for GTK rekey offload 
+ * @__NL80211_REKEY_DATA_INVALID: invalid number for nested attributes 
+ * @NL80211_REKEY_DATA_KEK: key encryption key (binary) 
+ * @NL80211_REKEY_DATA_KCK: key confirmation key (binary) 
+ * @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary) 
+ * @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal) 
+ * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal) 
+ */ 
+enum nl80211_rekey_data { 
+	__NL80211_REKEY_DATA_INVALID, 
+	NL80211_REKEY_DATA_KEK, 
+	NL80211_REKEY_DATA_KCK, 
+	NL80211_REKEY_DATA_REPLAY_CTR, 
+ 
+	/* keep last */ 
+	NUM_NL80211_REKEY_DATA, 
+	MAX_NL80211_REKEY_DATA = NUM_NL80211_REKEY_DATA - 1 
+}; 
+ 
+/** 
+ * enum nl80211_hidden_ssid - values for %NL80211_ATTR_HIDDEN_SSID 
+ * @NL80211_HIDDEN_SSID_NOT_IN_USE: do not hide SSID (i.e., broadcast it in 
+ *	Beacon frames) 
+ * @NL80211_HIDDEN_SSID_ZERO_LEN: hide SSID by using zero-length SSID element 
+ *	in Beacon frames 
+ * @NL80211_HIDDEN_SSID_ZERO_CONTENTS: hide SSID by using correct length of SSID 
+ *	element in Beacon frames but zero out each byte in the SSID 
+ */ 
+enum nl80211_hidden_ssid { 
+	NL80211_HIDDEN_SSID_NOT_IN_USE, 
+	NL80211_HIDDEN_SSID_ZERO_LEN, 
+	NL80211_HIDDEN_SSID_ZERO_CONTENTS 
+}; 
+ 
+/** 
+ * enum nl80211_sta_wme_attr - station WME attributes 
+ * @__NL80211_STA_WME_INVALID: invalid number for nested attribute 
+ * @NL80211_STA_WME_UAPSD_QUEUES: bitmap of uapsd queues. the format 
+ *	is the same as the AC bitmap in the QoS info field. 
+ * @NL80211_STA_WME_MAX_SP: max service period. the format is the same 
+ *	as the MAX_SP field in the QoS info field (but already shifted down). 
+ * @__NL80211_STA_WME_AFTER_LAST: internal 
+ * @NL80211_STA_WME_MAX: highest station WME attribute 
+ */ 
+enum nl80211_sta_wme_attr { 
+	__NL80211_STA_WME_INVALID, 
+	NL80211_STA_WME_UAPSD_QUEUES, 
+	NL80211_STA_WME_MAX_SP, 
+ 
+	/* keep last */ 
+	__NL80211_STA_WME_AFTER_LAST, 
+	NL80211_STA_WME_MAX = __NL80211_STA_WME_AFTER_LAST - 1 
+}; 
+ 
+/** 
+ * enum nl80211_pmksa_candidate_attr - attributes for PMKSA caching candidates 
+ * @__NL80211_PMKSA_CANDIDATE_INVALID: invalid number for nested attributes 
+ * @NL80211_PMKSA_CANDIDATE_INDEX: candidate index (u32; the smaller, the higher 
+ *	priority) 
+ * @NL80211_PMKSA_CANDIDATE_BSSID: candidate BSSID (6 octets) 
+ * @NL80211_PMKSA_CANDIDATE_PREAUTH: RSN pre-authentication supported (flag) 
+ * @NUM_NL80211_PMKSA_CANDIDATE: number of PMKSA caching candidate attributes 
+ *	(internal) 
+ * @MAX_NL80211_PMKSA_CANDIDATE: highest PMKSA caching candidate attribute 
+ *	(internal) 
+ */ 
+enum nl80211_pmksa_candidate_attr { 
+	__NL80211_PMKSA_CANDIDATE_INVALID, 
+	NL80211_PMKSA_CANDIDATE_INDEX, 
+	NL80211_PMKSA_CANDIDATE_BSSID, 
+	NL80211_PMKSA_CANDIDATE_PREAUTH, 
+ 
+	/* keep last */ 
+	NUM_NL80211_PMKSA_CANDIDATE, 
+	MAX_NL80211_PMKSA_CANDIDATE = NUM_NL80211_PMKSA_CANDIDATE - 1 
+}; 
+ 
+/** 
+ * enum nl80211_tdls_operation - values for %NL80211_ATTR_TDLS_OPERATION 
+ * @NL80211_TDLS_DISCOVERY_REQ: Send a TDLS discovery request 
+ * @NL80211_TDLS_SETUP: Setup TDLS link 
+ * @NL80211_TDLS_TEARDOWN: Teardown a TDLS link which is already established 
+ * @NL80211_TDLS_ENABLE_LINK: Enable TDLS link 
+ * @NL80211_TDLS_DISABLE_LINK: Disable TDLS link 
+ */ 
+enum nl80211_tdls_operation { 
+	NL80211_TDLS_DISCOVERY_REQ, 
+	NL80211_TDLS_SETUP, 
+	NL80211_TDLS_TEARDOWN, 
+	NL80211_TDLS_ENABLE_LINK, 
+	NL80211_TDLS_DISABLE_LINK, 
+}; 
+ 
+/* 
+ * enum nl80211_ap_sme_features - device-integrated AP features 
+ * Reserved for future use, no bits are defined in 
+ * NL80211_ATTR_DEVICE_AP_SME yet. 
+enum nl80211_ap_sme_features { 
+}; 
+ */ 
+ 
+/** 
+ * enum nl80211_feature_flags - device/driver features 
+ * @NL80211_FEATURE_SK_TX_STATUS: This driver supports reflecting back 
+ *	TX status to the socket error queue when requested with the 
+ *	socket option. 
+ * @NL80211_FEATURE_HT_IBSS: This driver supports IBSS with HT datarates. 
+ * @NL80211_FEATURE_INACTIVITY_TIMER: This driver takes care of freeing up 
+ *	the connected inactive stations in AP mode. 
+ * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested 
+ *	to work properly to suppport receiving regulatory hints from 
+ *	cellular base stations. 
+ * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: (no longer available, only 
+ *	here to reserve the value for API/ABI compatibility) 
+ * @NL80211_FEATURE_SAE: This driver supports simultaneous authentication of 
+ *	equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station 
+ *	mode 
+ * @NL80211_FEATURE_LOW_PRIORITY_SCAN: This driver supports low priority scan 
+ * @NL80211_FEATURE_SCAN_FLUSH: Scan flush is supported 
+ * @NL80211_FEATURE_AP_SCAN: Support scanning using an AP vif 
+ * @NL80211_FEATURE_VIF_TXPOWER: The driver supports per-vif TX power setting 
+ * @NL80211_FEATURE_NEED_OBSS_SCAN: The driver expects userspace to perform 
+ *	OBSS scans and generate 20/40 BSS coex reports. This flag is used only 
+ *	for drivers implementing the CONNECT API, for AUTH/ASSOC it is implied. 
+ * @NL80211_FEATURE_P2P_GO_CTWIN: P2P GO implementation supports CT Window 
+ *	setting 
+ * @NL80211_FEATURE_P2P_GO_OPPPS: P2P GO implementation supports opportunistic 
+ *	powersave 
+ * @NL80211_FEATURE_FULL_AP_CLIENT_STATE: The driver supports full state 
+ *	transitions for AP clients. Without this flag (and if the driver 
+ *	doesn't have the AP SME in the device) the driver supports adding 
+ *	stations only when they're associated and adds them in associated 
+ *	state (to later be transitioned into authorized), with this flag 
+ *	they should be added before even sending the authentication reply 
+ *	and then transitioned into authenticated, associated and authorized 
+ *	states using station flags. 
+ *	Note that even for drivers that support this, the default is to add 
+ *	stations in authenticated/associated state, so to add unauthenticated 
+ *	stations the authenticated/associated bits have to be set in the mask. 
+ * @NL80211_FEATURE_ADVERTISE_CHAN_LIMITS: cfg80211 advertises channel limits 
+ *	(HT40, VHT 80/160 MHz) if this flag is set 
+ * @NL80211_FEATURE_USERSPACE_MPM: This driver supports a userspace Mesh 
+ *	Peering Management entity which may be implemented by registering for 
+ *	beacons or NL80211_CMD_NEW_PEER_CANDIDATE events. The mesh beacon is 
+ *	still generated by the driver. 
+ * @NL80211_FEATURE_ACTIVE_MONITOR: This driver supports an active monitor 
+ *	interface. An active monitor interface behaves like a normal monitor 
+ *	interface, but gets added to the driver. It ensures that incoming 
+ *	unicast packets directed at the configured interface address get ACKed. 
+ * @NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE: This driver supports dynamic 
+ *	channel bandwidth change (e.g., HT 20 <-> 40 MHz channel) during the 
+ *	lifetime of a BSS. 
+ * @NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES: This device adds a DS Parameter 
+ *	Set IE to probe requests. 
+ * @NL80211_FEATURE_WFA_TPC_IE_IN_PROBES: This device adds a WFA TPC Report IE 
+ *	to probe requests. 
+ * @NL80211_FEATURE_QUIET: This device, in client mode, supports Quiet Period 
+ *	requests sent to it by an AP. 
+ * @NL80211_FEATURE_TX_POWER_INSERTION: This device is capable of inserting the 
+ *	current tx power value into the TPC Report IE in the spectrum 
+ *	management TPC Report action frame, and in the Radio Measurement Link 
+ *	Measurement Report action frame. 
+ * @NL80211_FEATURE_ACKTO_ESTIMATION: This driver supports dynamic ACK timeout 
+ *	estimation (dynack). %NL80211_ATTR_WIPHY_DYN_ACK flag attribute is used 
+ *	to enable dynack. 
+ * @NL80211_FEATURE_STATIC_SMPS: Device supports static spatial 
+ *	multiplexing powersave, ie. can turn off all but one chain 
+ *	even on HT connections that should be using more chains. 
+ * @NL80211_FEATURE_DYNAMIC_SMPS: Device supports dynamic spatial 
+ *	multiplexing powersave, ie. can turn off all but one chain 
+ *	and then wake the rest up as required after, for example, 
+ *	rts/cts handshake. 
+ * @NL80211_FEATURE_SUPPORTS_WMM_ADMISSION: the device supports setting up WMM 
+ *	TSPEC sessions (TID aka TSID 0-7) with the %NL80211_CMD_ADD_TX_TS 
+ *	command. Standard IEEE 802.11 TSPEC setup is not yet supported, it 
+ *	needs to be able to handle Block-Ack agreements and other things. 
+ * @NL80211_FEATURE_MAC_ON_CREATE: Device supports configuring 
+ *	the vif's MAC address upon creation. 
+ *	See 'macaddr' field in the vif_params (cfg80211.h). 
+ * @NL80211_FEATURE_TDLS_CHANNEL_SWITCH: Driver supports channel switching when 
+ *	operating as a TDLS peer. 
+ * @NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR: This device/driver supports using a 
+ *	random MAC address during scan (if the device is unassociated); the 
+ *	%NL80211_SCAN_FLAG_RANDOM_ADDR flag may be set for scans and the MAC 
+ *	address mask/value will be used. 
+ * @NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR: This device/driver supports 
+ *	using a random MAC address for every scan iteration during scheduled 
+ *	scan (while not associated), the %NL80211_SCAN_FLAG_RANDOM_ADDR may 
+ *	be set for scheduled scan and the MAC address mask/value will be used. 
+ * @NL80211_FEATURE_ND_RANDOM_MAC_ADDR: This device/driver supports using a 
+ *	random MAC address for every scan iteration during "net detect", i.e. 
+ *	scan in unassociated WoWLAN, the %NL80211_SCAN_FLAG_RANDOM_ADDR may 
+ *	be set for scheduled scan and the MAC address mask/value will be used. 
+ */ 
+enum nl80211_feature_flags { 
+	NL80211_FEATURE_SK_TX_STATUS			= 1 << 0, 
+	NL80211_FEATURE_HT_IBSS				= 1 << 1, 
+	NL80211_FEATURE_INACTIVITY_TIMER		= 1 << 2, 
+	NL80211_FEATURE_CELL_BASE_REG_HINTS		= 1 << 3, 
+	NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL	= 1 << 4, 
+	NL80211_FEATURE_SAE				= 1 << 5, 
+	NL80211_FEATURE_LOW_PRIORITY_SCAN		= 1 << 6, 
+	NL80211_FEATURE_SCAN_FLUSH			= 1 << 7, 
+	NL80211_FEATURE_AP_SCAN				= 1 << 8, 
+	NL80211_FEATURE_VIF_TXPOWER			= 1 << 9, 
+	NL80211_FEATURE_NEED_OBSS_SCAN			= 1 << 10, 
+	NL80211_FEATURE_P2P_GO_CTWIN			= 1 << 11, 
+	NL80211_FEATURE_P2P_GO_OPPPS			= 1 << 12, 
+	/* bit 13 is reserved */ 
+	NL80211_FEATURE_ADVERTISE_CHAN_LIMITS		= 1 << 14, 
+	NL80211_FEATURE_FULL_AP_CLIENT_STATE		= 1 << 15, 
+	NL80211_FEATURE_USERSPACE_MPM			= 1 << 16, 
+	NL80211_FEATURE_ACTIVE_MONITOR			= 1 << 17, 
+	NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE	= 1 << 18, 
+	NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES	= 1 << 19, 
+	NL80211_FEATURE_WFA_TPC_IE_IN_PROBES		= 1 << 20, 
+	NL80211_FEATURE_QUIET				= 1 << 21, 
+	NL80211_FEATURE_TX_POWER_INSERTION		= 1 << 22, 
+	NL80211_FEATURE_ACKTO_ESTIMATION		= 1 << 23, 
+	NL80211_FEATURE_STATIC_SMPS			= 1 << 24, 
+	NL80211_FEATURE_DYNAMIC_SMPS			= 1 << 25, 
+	NL80211_FEATURE_SUPPORTS_WMM_ADMISSION		= 1 << 26, 
+	NL80211_FEATURE_MAC_ON_CREATE			= 1 << 27, 
+	NL80211_FEATURE_TDLS_CHANNEL_SWITCH		= 1 << 28, 
+	NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR		= 1 << 29, 
+	NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR	= 1 << 30, 
+	NL80211_FEATURE_ND_RANDOM_MAC_ADDR		= 1U << 31, 
+}; 
+ 
+/** 
+ * enum nl80211_ext_feature_index - bit index of extended features. 
+ * @NL80211_EXT_FEATURE_VHT_IBSS: This driver supports IBSS with VHT datarates. 
+ * @NL80211_EXT_FEATURE_RRM: This driver supports RRM. When featured, user can 
+ *	can request to use RRM (see %NL80211_ATTR_USE_RRM) with 
+ *	%NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests, which will set 
+ *	the ASSOC_REQ_USE_RRM flag in the association request even if 
+ *	NL80211_FEATURE_QUIET is not advertized. 
+ * @NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER: This device supports MU-MIMO air 
+ *	sniffer which means that it can be configured to hear packets from 
+ *	certain groups which can be configured by the 
+ *	%NL80211_ATTR_MU_MIMO_GROUP_DATA attribute, 
+ *	or can be configured to follow a station by configuring the 
+ *	%NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR attribute. 
+ * @NL80211_EXT_FEATURE_SCAN_START_TIME: This driver includes the actual 
+ *	time the scan started in scan results event. The time is the TSF of 
+ *	the BSS that the interface that requested the scan is connected to 
+ *	(if available). 
+ * @NL80211_EXT_FEATURE_BSS_PARENT_TSF: Per BSS, this driver reports the 
+ *	time the last beacon/probe was received. The time is the TSF of the 
+ *	BSS that the interface that requested the scan is connected to 
+ *	(if available). 
+ * @NL80211_EXT_FEATURE_SET_SCAN_DWELL: This driver supports configuration of 
+ *	channel dwell time. 
+ * @NL80211_EXT_FEATURE_BEACON_RATE_LEGACY: Driver supports beacon rate 
+ *	configuration (AP/mesh), supporting a legacy (non HT/VHT) rate. 
+ * @NL80211_EXT_FEATURE_BEACON_RATE_HT: Driver supports beacon rate 
+ *	configuration (AP/mesh) with HT rates. 
+ * @NL80211_EXT_FEATURE_BEACON_RATE_VHT: Driver supports beacon rate 
+ *	configuration (AP/mesh) with VHT rates. 
+ * @NL80211_EXT_FEATURE_FILS_STA: This driver supports Fast Initial Link Setup 
+ *	with user space SME (NL80211_CMD_AUTHENTICATE) in station mode. 
+ * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA: This driver supports randomized TA 
+ *	in @NL80211_CMD_FRAME while not associated. 
+ * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED: This driver supports 
+ *	randomized TA in @NL80211_CMD_FRAME while associated. 
+ * @NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI: The driver supports sched_scan 
+ *	for reporting BSSs with better RSSI than the current connected BSS 
+ *	(%NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI). 
+ * @NL80211_EXT_FEATURE_CQM_RSSI_LIST: With this driver the 
+ *	%NL80211_ATTR_CQM_RSSI_THOLD attribute accepts a list of zero or more 
+ *	RSSI threshold values to monitor rather than exactly one threshold. 
+ * @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD: Driver SME supports FILS shared key 
+ *	authentication with %NL80211_CMD_CONNECT. 
+ * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK: Device wants to do 4-way 
+ *	handshake with PSK in station mode (PSK is passed as part of the connect 
+ *	and associate commands), doing it in the host might not be supported. 
+ * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X: Device wants to do doing 4-way 
+ *	handshake with 802.1X in station mode (will pass EAP frames to the host 
+ *	and accept the set_pmk/del_pmk commands), doing it in the host might not 
+ *	be supported. 
+ * @NL80211_EXT_FEATURE_FILS_MAX_CHANNEL_TIME: Driver is capable of overriding 
+ *	the max channel attribute in the FILS request params IE with the 
+ *	actual dwell time. 
+ * @NL80211_EXT_FEATURE_ACCEPT_BCAST_PROBE_RESP: Driver accepts broadcast probe 
+ *	response 
+ * @NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE: Driver supports sending 
+ *	the first probe request in each channel at rate of at least 5.5Mbps. 
+ * @NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: Driver supports 
+ *	probe request tx deferral and suppression 
+ * @NL80211_EXT_FEATURE_MFP_OPTIONAL: Driver supports the %NL80211_MFP_OPTIONAL 
+ *	value in %NL80211_ATTR_USE_MFP. 
+ * @NL80211_EXT_FEATURE_LOW_SPAN_SCAN: Driver supports low span scan. 
+ * @NL80211_EXT_FEATURE_LOW_POWER_SCAN: Driver supports low power scan. 
+ * @NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN: Driver supports high accuracy scan. 
+ * @NL80211_EXT_FEATURE_DFS_OFFLOAD: HW/driver will offload DFS actions. 
+ *	Device or driver will do all DFS-related actions by itself, 
+ *	informing user-space about CAC progress, radar detection event, 
+ *	channel change triggered by radar detection event. 
+ *	No need to start CAC from user-space, no need to react to 
+ *	"radar detected" event. 
+ * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211: Driver supports sending and 
+ *	receiving control port frames over nl80211 instead of the netdevice. 
+ * @NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT: This driver/device supports 
+ *	(average) ACK signal strength reporting. 
+ * @NL80211_EXT_FEATURE_TXQS: Driver supports FQ-CoDel-enabled intermediate 
+ *      TXQs. 
+ * @NL80211_EXT_FEATURE_SCAN_RANDOM_SN: Driver/device supports randomizing the 
+ *	SN in probe request frames if requested by %NL80211_SCAN_FLAG_RANDOM_SN. 
+ * @NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT: Driver/device can omit all data 
+ *	except for supported rates from the probe request content if requested 
+ *	by the %NL80211_SCAN_FLAG_MIN_PREQ_CONTENT flag. 
+ * @NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER: Driver supports enabling fine 
+ *	timing measurement responder role. 
+ * 
+ * @NL80211_EXT_FEATURE_CAN_REPLACE_PTK0: Driver/device confirm that they are 
+ *      able to rekey an in-use key correctly. Userspace must not rekey PTK keys 
+ *      if this flag is not set. Ignoring this can leak clear text packets and/or 
+ *      freeze the connection. 
+ * @NL80211_EXT_FEATURE_EXT_KEY_ID: Driver supports "Extended Key ID for 
+ *      Individually Addressed Frames" from IEEE802.11-2016. 
+ * 
+ * @NL80211_EXT_FEATURE_AIRTIME_FAIRNESS: Driver supports getting airtime 
+ *	fairness for transmitted packets and has enabled airtime fairness 
+ *	scheduling. 
+ * 
+ * @NL80211_EXT_FEATURE_AP_PMKSA_CACHING: Driver/device supports PMKSA caching 
+ *	(set/del PMKSA operations) in AP mode. 
+ * 
+ * @NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD: Driver supports 
+ *	filtering of sched scan results using band specific RSSI thresholds. 
+ * 
+ * @NL80211_EXT_FEATURE_STA_TX_PWR: This driver supports controlling tx power 
+ *	to a station. 
+ * 
+ * @NL80211_EXT_FEATURE_SAE_OFFLOAD: Device wants to do SAE authentication in 
+ *	station mode (SAE password is passed as part of the connect command). 
+ * 
+ * @NL80211_EXT_FEATURE_VLAN_OFFLOAD: The driver supports a single netdev 
+ *	with VLAN tagged frames and separate VLAN-specific netdevs added using 
+ *	vconfig similarly to the Ethernet case. 
+ * 
+ * @NL80211_EXT_FEATURE_AQL: The driver supports the Airtime Queue Limit (AQL) 
+ *	feature, which prevents bufferbloat by using the expected transmission 
+ *	time to limit the amount of data buffered in the hardware. 
+ * 
+ * @NL80211_EXT_FEATURE_BEACON_PROTECTION: The driver supports Beacon protection 
+ *	and can receive key configuration for BIGTK using key indexes 6 and 7. 
+ * 
+ * @NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH: The driver can disable the 
+ *	forwarding of preauth frames over the control port. They are then 
+ *	handled as ordinary data frames. 
+ * 
+ * @NL80211_EXT_FEATURE_PROTECTED_TWT: Driver supports protected TWT frames 
+ * 
+ * @NL80211_EXT_FEATURE_DEL_IBSS_STA: The driver supports removing stations 
+ *      in IBSS mode, essentially by dropping their state. 
+ * 
+ * @NUM_NL80211_EXT_FEATURES: number of extended features. 
+ * @MAX_NL80211_EXT_FEATURES: highest extended feature index. 
+ */ 
+enum nl80211_ext_feature_index { 
+	NL80211_EXT_FEATURE_VHT_IBSS, 
+	NL80211_EXT_FEATURE_RRM, 
+	NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER, 
+	NL80211_EXT_FEATURE_SCAN_START_TIME, 
+	NL80211_EXT_FEATURE_BSS_PARENT_TSF, 
+	NL80211_EXT_FEATURE_SET_SCAN_DWELL, 
+	NL80211_EXT_FEATURE_BEACON_RATE_LEGACY, 
+	NL80211_EXT_FEATURE_BEACON_RATE_HT, 
+	NL80211_EXT_FEATURE_BEACON_RATE_VHT, 
+	NL80211_EXT_FEATURE_FILS_STA, 
+	NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA, 
+	NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED, 
+	NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI, 
+	NL80211_EXT_FEATURE_CQM_RSSI_LIST, 
+	NL80211_EXT_FEATURE_FILS_SK_OFFLOAD, 
+	NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK, 
+	NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X, 
+	NL80211_EXT_FEATURE_FILS_MAX_CHANNEL_TIME, 
+	NL80211_EXT_FEATURE_ACCEPT_BCAST_PROBE_RESP, 
+	NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE, 
+	NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION, 
+	NL80211_EXT_FEATURE_MFP_OPTIONAL, 
+	NL80211_EXT_FEATURE_LOW_SPAN_SCAN, 
+	NL80211_EXT_FEATURE_LOW_POWER_SCAN, 
+	NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN, 
+	NL80211_EXT_FEATURE_DFS_OFFLOAD, 
+	NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211, 
+	NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT, 
+	/* we renamed this - stay compatible */ 
+	NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT = NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT, 
+	NL80211_EXT_FEATURE_TXQS, 
+	NL80211_EXT_FEATURE_SCAN_RANDOM_SN, 
+	NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT, 
+	NL80211_EXT_FEATURE_CAN_REPLACE_PTK0, 
+	NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER, 
+	NL80211_EXT_FEATURE_AIRTIME_FAIRNESS, 
+	NL80211_EXT_FEATURE_AP_PMKSA_CACHING, 
+	NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD, 
+	NL80211_EXT_FEATURE_EXT_KEY_ID, 
+	NL80211_EXT_FEATURE_STA_TX_PWR, 
+	NL80211_EXT_FEATURE_SAE_OFFLOAD, 
+	NL80211_EXT_FEATURE_VLAN_OFFLOAD, 
+	NL80211_EXT_FEATURE_AQL, 
+	NL80211_EXT_FEATURE_BEACON_PROTECTION, 
+	NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH, 
+	NL80211_EXT_FEATURE_PROTECTED_TWT, 
+	NL80211_EXT_FEATURE_DEL_IBSS_STA, 
+ 
+	/* add new features before the definition below */ 
+	NUM_NL80211_EXT_FEATURES, 
+	MAX_NL80211_EXT_FEATURES = NUM_NL80211_EXT_FEATURES - 1 
+}; 
+ 
+/** 
+ * enum nl80211_probe_resp_offload_support_attr - optional supported 
+ *	protocols for probe-response offloading by the driver/FW. 
+ *	To be used with the %NL80211_ATTR_PROBE_RESP_OFFLOAD attribute. 
+ *	Each enum value represents a bit in the bitmap of supported 
+ *	protocols. Typically a subset of probe-requests belonging to a 
+ *	supported protocol will be excluded from offload and uploaded 
+ *	to the host. 
+ * 
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS: Support for WPS ver. 1 
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2: Support for WPS ver. 2 
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P: Support for P2P 
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U: Support for 802.11u 
+ */ 
+enum nl80211_probe_resp_offload_support_attr { 
+	NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS =	1<<0, 
+	NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 =	1<<1, 
+	NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P =	1<<2, 
+	NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U =	1<<3, 
+}; 
+ 
+/** 
+ * enum nl80211_connect_failed_reason - connection request failed reasons 
+ * @NL80211_CONN_FAIL_MAX_CLIENTS: Maximum number of clients that can be 
+ *	handled by the AP is reached. 
+ * @NL80211_CONN_FAIL_BLOCKED_CLIENT: Connection request is rejected due to ACL. 
+ */ 
+enum nl80211_connect_failed_reason { 
+	NL80211_CONN_FAIL_MAX_CLIENTS, 
+	NL80211_CONN_FAIL_BLOCKED_CLIENT, 
+}; 
+ 
+/** 
+ * enum nl80211_timeout_reason - timeout reasons 
+ * 
+ * @NL80211_TIMEOUT_UNSPECIFIED: Timeout reason unspecified. 
+ * @NL80211_TIMEOUT_SCAN: Scan (AP discovery) timed out. 
+ * @NL80211_TIMEOUT_AUTH: Authentication timed out. 
+ * @NL80211_TIMEOUT_ASSOC: Association timed out. 
+ */ 
+enum nl80211_timeout_reason { 
+	NL80211_TIMEOUT_UNSPECIFIED, 
+	NL80211_TIMEOUT_SCAN, 
+	NL80211_TIMEOUT_AUTH, 
+	NL80211_TIMEOUT_ASSOC, 
+}; 
+ 
+/** 
+ * enum nl80211_scan_flags -  scan request control flags 
+ * 
+ * Scan request control flags are used to control the handling 
+ * of NL80211_CMD_TRIGGER_SCAN and NL80211_CMD_START_SCHED_SCAN 
+ * requests. 
+ * 
+ * NL80211_SCAN_FLAG_LOW_SPAN, NL80211_SCAN_FLAG_LOW_POWER, and 
+ * NL80211_SCAN_FLAG_HIGH_ACCURACY flags are exclusive of each other, i.e., only 
+ * one of them can be used in the request. 
+ * 
+ * @NL80211_SCAN_FLAG_LOW_PRIORITY: scan request has low priority 
+ * @NL80211_SCAN_FLAG_FLUSH: flush cache before scanning 
+ * @NL80211_SCAN_FLAG_AP: force a scan even if the interface is configured 
+ *	as AP and the beaconing has already been configured. This attribute is 
+ *	dangerous because will destroy stations performance as a lot of frames 
+ *	will be lost while scanning off-channel, therefore it must be used only 
+ *	when really needed 
+ * @NL80211_SCAN_FLAG_RANDOM_ADDR: use a random MAC address for this scan (or 
+ *	for scheduled scan: a different one for every scan iteration). When the 
+ *	flag is set, depending on device capabilities the @NL80211_ATTR_MAC and 
+ *	@NL80211_ATTR_MAC_MASK attributes may also be given in which case only 
+ *	the masked bits will be preserved from the MAC address and the remainder 
+ *	randomised. If the attributes are not given full randomisation (46 bits, 
+ *	locally administered 1, multicast 0) is assumed. 
+ *	This flag must not be requested when the feature isn't supported, check 
+ *	the nl80211 feature flags for the device. 
+ * @NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME: fill the dwell time in the FILS 
+ *	request parameters IE in the probe request 
+ * @NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP: accept broadcast probe responses 
+ * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE: send probe request frames at 
+ *	rate of at least 5.5M. In case non OCE AP is discovered in the channel, 
+ *	only the first probe req in the channel will be sent in high rate. 
+ * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: allow probe request 
+ *	tx deferral (dot11FILSProbeDelay shall be set to 15ms) 
+ *	and suppression (if it has received a broadcast Probe Response frame, 
+ *	Beacon frame or FILS Discovery frame from an AP that the STA considers 
+ *	a suitable candidate for (re-)association - suitable in terms of 
+ *	SSID and/or RSSI. 
+ * @NL80211_SCAN_FLAG_LOW_SPAN: Span corresponds to the total time taken to 
+ *	accomplish the scan. Thus, this flag intends the driver to perform the 
+ *	scan request with lesser span/duration. It is specific to the driver 
+ *	implementations on how this is accomplished. Scan accuracy may get 
+ *	impacted with this flag. 
+ * @NL80211_SCAN_FLAG_LOW_POWER: This flag intends the scan attempts to consume 
+ *	optimal possible power. Drivers can resort to their specific means to 
+ *	optimize the power. Scan accuracy may get impacted with this flag. 
+ * @NL80211_SCAN_FLAG_HIGH_ACCURACY: Accuracy here intends to the extent of scan 
+ *	results obtained. Thus HIGH_ACCURACY scan flag aims to get maximum 
+ *	possible scan results. This flag hints the driver to use the best 
+ *	possible scan configuration to improve the accuracy in scanning. 
+ *	Latency and power use may get impacted with this flag. 
+ * @NL80211_SCAN_FLAG_RANDOM_SN: randomize the sequence number in probe 
+ *	request frames from this scan to avoid correlation/tracking being 
+ *	possible. 
+ * @NL80211_SCAN_FLAG_MIN_PREQ_CONTENT: minimize probe request content to 
+ *	only have supported rates and no additional capabilities (unless 
+ *	added by userspace explicitly.) 
+ */ 
+enum nl80211_scan_flags { 
+	NL80211_SCAN_FLAG_LOW_PRIORITY				= 1<<0, 
+	NL80211_SCAN_FLAG_FLUSH					= 1<<1, 
+	NL80211_SCAN_FLAG_AP					= 1<<2, 
+	NL80211_SCAN_FLAG_RANDOM_ADDR				= 1<<3, 
+	NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME			= 1<<4, 
+	NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP		= 1<<5, 
+	NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE		= 1<<6, 
+	NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION	= 1<<7, 
+	NL80211_SCAN_FLAG_LOW_SPAN				= 1<<8, 
+	NL80211_SCAN_FLAG_LOW_POWER				= 1<<9, 
+	NL80211_SCAN_FLAG_HIGH_ACCURACY				= 1<<10, 
+	NL80211_SCAN_FLAG_RANDOM_SN				= 1<<11, 
+	NL80211_SCAN_FLAG_MIN_PREQ_CONTENT			= 1<<12, 
+}; 
+ 
+/** 
+ * enum nl80211_acl_policy - access control policy 
+ * 
+ * Access control policy is applied on a MAC list set by 
+ * %NL80211_CMD_START_AP and %NL80211_CMD_SET_MAC_ACL, to 
+ * be used with %NL80211_ATTR_ACL_POLICY. 
+ * 
+ * @NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED: Deny stations which are 
+ *	listed in ACL, i.e. allow all the stations which are not listed 
+ *	in ACL to authenticate. 
+ * @NL80211_ACL_POLICY_DENY_UNLESS_LISTED: Allow the stations which are listed 
+ *	in ACL, i.e. deny all the stations which are not listed in ACL. 
+ */ 
+enum nl80211_acl_policy { 
+	NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED, 
+	NL80211_ACL_POLICY_DENY_UNLESS_LISTED, 
+}; 
+ 
+/** 
+ * enum nl80211_smps_mode - SMPS mode 
+ * 
+ * Requested SMPS mode (for AP mode) 
+ * 
+ * @NL80211_SMPS_OFF: SMPS off (use all antennas). 
+ * @NL80211_SMPS_STATIC: static SMPS (use a single antenna) 
+ * @NL80211_SMPS_DYNAMIC: dynamic smps (start with a single antenna and 
+ *	turn on other antennas after CTS/RTS). 
+ */ 
+enum nl80211_smps_mode { 
+	NL80211_SMPS_OFF, 
+	NL80211_SMPS_STATIC, 
+	NL80211_SMPS_DYNAMIC, 
+ 
+	__NL80211_SMPS_AFTER_LAST, 
+	NL80211_SMPS_MAX = __NL80211_SMPS_AFTER_LAST - 1 
+}; 
+ 
+/** 
+ * enum nl80211_radar_event - type of radar event for DFS operation 
+ * 
+ * Type of event to be used with NL80211_ATTR_RADAR_EVENT to inform userspace 
+ * about detected radars or success of the channel available check (CAC) 
+ * 
+ * @NL80211_RADAR_DETECTED: A radar pattern has been detected. The channel is 
+ *	now unusable. 
+ * @NL80211_RADAR_CAC_FINISHED: Channel Availability Check has been finished, 
+ *	the channel is now available. 
+ * @NL80211_RADAR_CAC_ABORTED: Channel Availability Check has been aborted, no 
+ *	change to the channel status. 
+ * @NL80211_RADAR_NOP_FINISHED: The Non-Occupancy Period for this channel is 
+ *	over, channel becomes usable. 
+ * @NL80211_RADAR_PRE_CAC_EXPIRED: Channel Availability Check done on this 
+ *	non-operating channel is expired and no longer valid. New CAC must 
+ *	be done on this channel before starting the operation. This is not 
+ *	applicable for ETSI dfs domain where pre-CAC is valid for ever. 
+ * @NL80211_RADAR_CAC_STARTED: Channel Availability Check has been started, 
+ *	should be generated by HW if NL80211_EXT_FEATURE_DFS_OFFLOAD is enabled. 
+ */ 
+enum nl80211_radar_event { 
+	NL80211_RADAR_DETECTED, 
+	NL80211_RADAR_CAC_FINISHED, 
+	NL80211_RADAR_CAC_ABORTED, 
+	NL80211_RADAR_NOP_FINISHED, 
+	NL80211_RADAR_PRE_CAC_EXPIRED, 
+	NL80211_RADAR_CAC_STARTED, 
+}; 
+ 
+/** 
+ * enum nl80211_dfs_state - DFS states for channels 
+ * 
+ * Channel states used by the DFS code. 
+ * 
+ * @NL80211_DFS_USABLE: The channel can be used, but channel availability 
+ *	check (CAC) must be performed before using it for AP or IBSS. 
+ * @NL80211_DFS_UNAVAILABLE: A radar has been detected on this channel, it 
+ *	is therefore marked as not available. 
+ * @NL80211_DFS_AVAILABLE: The channel has been CAC checked and is available. 
+ */ 
+enum nl80211_dfs_state { 
+	NL80211_DFS_USABLE, 
+	NL80211_DFS_UNAVAILABLE, 
+	NL80211_DFS_AVAILABLE, 
+}; 
+ 
+/** 
+ * enum enum nl80211_protocol_features - nl80211 protocol features 
+ * @NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP: nl80211 supports splitting 
+ *	wiphy dumps (if requested by the application with the attribute 
+ *	%NL80211_ATTR_SPLIT_WIPHY_DUMP. Also supported is filtering the 
+ *	wiphy dump by %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFINDEX or 
+ *	%NL80211_ATTR_WDEV. 
+ */ 
+enum nl80211_protocol_features { 
+	NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP =	1 << 0, 
+}; 
+ 
+/** 
+ * enum nl80211_crit_proto_id - nl80211 critical protocol identifiers 
+ * 
+ * @NL80211_CRIT_PROTO_UNSPEC: protocol unspecified. 
+ * @NL80211_CRIT_PROTO_DHCP: BOOTP or DHCPv6 protocol. 
+ * @NL80211_CRIT_PROTO_EAPOL: EAPOL protocol. 
+ * @NL80211_CRIT_PROTO_APIPA: APIPA protocol. 
+ * @NUM_NL80211_CRIT_PROTO: must be kept last. 
+ */ 
+enum nl80211_crit_proto_id { 
+	NL80211_CRIT_PROTO_UNSPEC, 
+	NL80211_CRIT_PROTO_DHCP, 
+	NL80211_CRIT_PROTO_EAPOL, 
+	NL80211_CRIT_PROTO_APIPA, 
+	/* add other protocols before this one */ 
+	NUM_NL80211_CRIT_PROTO 
+}; 
+ 
+/* maximum duration for critical protocol measures */ 
+#define NL80211_CRIT_PROTO_MAX_DURATION		5000 /* msec */ 
+ 
+/** 
+ * enum nl80211_rxmgmt_flags - flags for received management frame. 
+ * 
+ * Used by cfg80211_rx_mgmt() 
+ * 
+ * @NL80211_RXMGMT_FLAG_ANSWERED: frame was answered by device/driver. 
+ * @NL80211_RXMGMT_FLAG_EXTERNAL_AUTH: Host driver intends to offload 
+ *	the authentication. Exclusively defined for host drivers that 
+ *	advertises the SME functionality but would like the userspace 
+ *	to handle certain authentication algorithms (e.g. SAE). 
+ */ 
+enum nl80211_rxmgmt_flags { 
+	NL80211_RXMGMT_FLAG_ANSWERED = 1 << 0, 
+	NL80211_RXMGMT_FLAG_EXTERNAL_AUTH = 1 << 1, 
+}; 
+ 
+/* 
+ * If this flag is unset, the lower 24 bits are an OUI, if set 
+ * a Linux nl80211 vendor ID is used (no such IDs are allocated 
+ * yet, so that's not valid so far) 
+ */ 
+#define NL80211_VENDOR_ID_IS_LINUX	0x80000000 
+ 
+/** 
+ * struct nl80211_vendor_cmd_info - vendor command data 
+ * @vendor_id: If the %NL80211_VENDOR_ID_IS_LINUX flag is clear, then the 
+ *	value is a 24-bit OUI; if it is set then a separately allocated ID 
+ *	may be used, but no such IDs are allocated yet. New IDs should be 
+ *	added to this file when needed. 
+ * @subcmd: sub-command ID for the command 
+ */ 
+struct nl80211_vendor_cmd_info { 
+	__u32 vendor_id; 
+	__u32 subcmd; 
+}; 
+ 
+/** 
+ * enum nl80211_tdls_peer_capability - TDLS peer flags. 
+ * 
+ * Used by tdls_mgmt() to determine which conditional elements need 
+ * to be added to TDLS Setup frames. 
+ * 
+ * @NL80211_TDLS_PEER_HT: TDLS peer is HT capable. 
+ * @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable. 
+ * @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable. 
+ */ 
+enum nl80211_tdls_peer_capability { 
+	NL80211_TDLS_PEER_HT = 1<<0, 
+	NL80211_TDLS_PEER_VHT = 1<<1, 
+	NL80211_TDLS_PEER_WMM = 1<<2, 
+}; 
+ 
+/** 
+ * enum nl80211_sched_scan_plan - scanning plan for scheduled scan 
+ * @__NL80211_SCHED_SCAN_PLAN_INVALID: attribute number 0 is reserved 
+ * @NL80211_SCHED_SCAN_PLAN_INTERVAL: interval between scan iterations. In 
+ *	seconds (u32). 
+ * @NL80211_SCHED_SCAN_PLAN_ITERATIONS: number of scan iterations in this 
+ *	scan plan (u32). The last scan plan must not specify this attribute 
+ *	because it will run infinitely. A value of zero is invalid as it will 
+ *	make the scan plan meaningless. 
+ * @NL80211_SCHED_SCAN_PLAN_MAX: highest scheduled scan plan attribute number 
+ *	currently defined 
+ * @__NL80211_SCHED_SCAN_PLAN_AFTER_LAST: internal use 
+ */ 
+enum nl80211_sched_scan_plan { 
+	__NL80211_SCHED_SCAN_PLAN_INVALID, 
+	NL80211_SCHED_SCAN_PLAN_INTERVAL, 
+	NL80211_SCHED_SCAN_PLAN_ITERATIONS, 
+ 
+	/* keep last */ 
+	__NL80211_SCHED_SCAN_PLAN_AFTER_LAST, 
+	NL80211_SCHED_SCAN_PLAN_MAX = 
+		__NL80211_SCHED_SCAN_PLAN_AFTER_LAST - 1 
+}; 
+ 
+/** 
+ * struct nl80211_bss_select_rssi_adjust - RSSI adjustment parameters. 
+ * 
+ * @band: band of BSS that must match for RSSI value adjustment. The value 
+ *	of this field is according to &enum nl80211_band. 
+ * @delta: value used to adjust the RSSI value of matching BSS in dB. 
+ */ 
+struct nl80211_bss_select_rssi_adjust { 
+	__u8 band; 
+	__s8 delta; 
+} __attribute__((packed)); 
+ 
+/** 
+ * enum nl80211_bss_select_attr - attributes for bss selection. 
+ * 
+ * @__NL80211_BSS_SELECT_ATTR_INVALID: reserved. 
+ * @NL80211_BSS_SELECT_ATTR_RSSI: Flag indicating only RSSI-based BSS selection 
+ *	is requested. 
+ * @NL80211_BSS_SELECT_ATTR_BAND_PREF: attribute indicating BSS 
+ *	selection should be done such that the specified band is preferred. 
+ *	When there are multiple BSS-es in the preferred band, the driver 
+ *	shall use RSSI-based BSS selection as a second step. The value of 
+ *	this attribute is according to &enum nl80211_band (u32). 
+ * @NL80211_BSS_SELECT_ATTR_RSSI_ADJUST: When present the RSSI level for 
+ *	BSS-es in the specified band is to be adjusted before doing 
+ *	RSSI-based BSS selection. The attribute value is a packed structure 
+ *	value as specified by &struct nl80211_bss_select_rssi_adjust. 
+ * @NL80211_BSS_SELECT_ATTR_MAX: highest bss select attribute number. 
+ * @__NL80211_BSS_SELECT_ATTR_AFTER_LAST: internal use. 
+ * 
+ * One and only one of these attributes are found within %NL80211_ATTR_BSS_SELECT 
+ * for %NL80211_CMD_CONNECT. It specifies the required BSS selection behaviour 
+ * which the driver shall use. 
+ */ 
+enum nl80211_bss_select_attr { 
+	__NL80211_BSS_SELECT_ATTR_INVALID, 
+	NL80211_BSS_SELECT_ATTR_RSSI, 
+	NL80211_BSS_SELECT_ATTR_BAND_PREF, 
+	NL80211_BSS_SELECT_ATTR_RSSI_ADJUST, 
+ 
+	/* keep last */ 
+	__NL80211_BSS_SELECT_ATTR_AFTER_LAST, 
+	NL80211_BSS_SELECT_ATTR_MAX = __NL80211_BSS_SELECT_ATTR_AFTER_LAST - 1 
+}; 
+ 
+/** 
+ * enum nl80211_nan_function_type - NAN function type 
+ * 
+ * Defines the function type of a NAN function 
+ * 
+ * @NL80211_NAN_FUNC_PUBLISH: function is publish 
+ * @NL80211_NAN_FUNC_SUBSCRIBE: function is subscribe 
+ * @NL80211_NAN_FUNC_FOLLOW_UP: function is follow-up 
+ */ 
+enum nl80211_nan_function_type { 
+	NL80211_NAN_FUNC_PUBLISH, 
+	NL80211_NAN_FUNC_SUBSCRIBE, 
+	NL80211_NAN_FUNC_FOLLOW_UP, 
+ 
+	/* keep last */ 
+	__NL80211_NAN_FUNC_TYPE_AFTER_LAST, 
+	NL80211_NAN_FUNC_MAX_TYPE = __NL80211_NAN_FUNC_TYPE_AFTER_LAST - 1, 
+}; 
+ 
+/** 
+ * enum nl80211_nan_publish_type - NAN publish tx type 
+ * 
+ * Defines how to send publish Service Discovery Frames 
+ * 
+ * @NL80211_NAN_SOLICITED_PUBLISH: publish function is solicited 
+ * @NL80211_NAN_UNSOLICITED_PUBLISH: publish function is unsolicited 
+ */ 
+enum nl80211_nan_publish_type { 
+	NL80211_NAN_SOLICITED_PUBLISH = 1 << 0, 
+	NL80211_NAN_UNSOLICITED_PUBLISH = 1 << 1, 
+}; 
+ 
+/** 
+ * enum nl80211_nan_func_term_reason - NAN functions termination reason 
+ * 
+ * Defines termination reasons of a NAN function 
+ * 
+ * @NL80211_NAN_FUNC_TERM_REASON_USER_REQUEST: requested by user 
+ * @NL80211_NAN_FUNC_TERM_REASON_TTL_EXPIRED: timeout 
+ * @NL80211_NAN_FUNC_TERM_REASON_ERROR: errored 
+ */ 
+enum nl80211_nan_func_term_reason { 
+	NL80211_NAN_FUNC_TERM_REASON_USER_REQUEST, 
+	NL80211_NAN_FUNC_TERM_REASON_TTL_EXPIRED, 
+	NL80211_NAN_FUNC_TERM_REASON_ERROR, 
+}; 
+ 
+#define NL80211_NAN_FUNC_SERVICE_ID_LEN 6 
+#define NL80211_NAN_FUNC_SERVICE_SPEC_INFO_MAX_LEN 0xff 
+#define NL80211_NAN_FUNC_SRF_MAX_LEN 0xff 
+ 
+/** 
+ * enum nl80211_nan_func_attributes - NAN function attributes 
+ * @__NL80211_NAN_FUNC_INVALID: invalid 
+ * @NL80211_NAN_FUNC_TYPE: &enum nl80211_nan_function_type (u8). 
+ * @NL80211_NAN_FUNC_SERVICE_ID: 6 bytes of the service ID hash as 
+ *	specified in NAN spec. This is a binary attribute. 
+ * @NL80211_NAN_FUNC_PUBLISH_TYPE: relevant if the function's type is 
+ *	publish. Defines the transmission type for the publish Service Discovery 
+ *	Frame, see &enum nl80211_nan_publish_type. Its type is u8. 
+ * @NL80211_NAN_FUNC_PUBLISH_BCAST: relevant if the function is a solicited 
+ *	publish. Should the solicited publish Service Discovery Frame be sent to 
+ *	the NAN Broadcast address. This is a flag. 
+ * @NL80211_NAN_FUNC_SUBSCRIBE_ACTIVE: relevant if the function's type is 
+ *	subscribe. Is the subscribe active. This is a flag. 
+ * @NL80211_NAN_FUNC_FOLLOW_UP_ID: relevant if the function's type is follow up. 
+ *	The instance ID for the follow up Service Discovery Frame. This is u8. 
+ * @NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID: relevant if the function's type 
+ *	is follow up. This is a u8. 
+ *	The requestor instance ID for the follow up Service Discovery Frame. 
+ * @NL80211_NAN_FUNC_FOLLOW_UP_DEST: the MAC address of the recipient of the 
+ *	follow up Service Discovery Frame. This is a binary attribute. 
+ * @NL80211_NAN_FUNC_CLOSE_RANGE: is this function limited for devices in a 
+ *	close range. The range itself (RSSI) is defined by the device. 
+ *	This is a flag. 
+ * @NL80211_NAN_FUNC_TTL: strictly positive number of DWs this function should 
+ *	stay active. If not present infinite TTL is assumed. This is a u32. 
+ * @NL80211_NAN_FUNC_SERVICE_INFO: array of bytes describing the service 
+ *	specific info. This is a binary attribute. 
+ * @NL80211_NAN_FUNC_SRF: Service Receive Filter. This is a nested attribute. 
+ *	See &enum nl80211_nan_srf_attributes. 
+ * @NL80211_NAN_FUNC_RX_MATCH_FILTER: Receive Matching filter. This is a nested 
+ *	attribute. It is a list of binary values. 
+ * @NL80211_NAN_FUNC_TX_MATCH_FILTER: Transmit Matching filter. This is a 
+ *	nested attribute. It is a list of binary values. 
+ * @NL80211_NAN_FUNC_INSTANCE_ID: The instance ID of the function. 
+ *	Its type is u8 and it cannot be 0. 
+ * @NL80211_NAN_FUNC_TERM_REASON: NAN function termination reason. 
+ *	See &enum nl80211_nan_func_term_reason. 
+ * 
+ * @NUM_NL80211_NAN_FUNC_ATTR: internal 
+ * @NL80211_NAN_FUNC_ATTR_MAX: highest NAN function attribute 
+ */ 
+enum nl80211_nan_func_attributes { 
+	__NL80211_NAN_FUNC_INVALID, 
+	NL80211_NAN_FUNC_TYPE, 
+	NL80211_NAN_FUNC_SERVICE_ID, 
+	NL80211_NAN_FUNC_PUBLISH_TYPE, 
+	NL80211_NAN_FUNC_PUBLISH_BCAST, 
+	NL80211_NAN_FUNC_SUBSCRIBE_ACTIVE, 
+	NL80211_NAN_FUNC_FOLLOW_UP_ID, 
+	NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID, 
+	NL80211_NAN_FUNC_FOLLOW_UP_DEST, 
+	NL80211_NAN_FUNC_CLOSE_RANGE, 
+	NL80211_NAN_FUNC_TTL, 
+	NL80211_NAN_FUNC_SERVICE_INFO, 
+	NL80211_NAN_FUNC_SRF, 
+	NL80211_NAN_FUNC_RX_MATCH_FILTER, 
+	NL80211_NAN_FUNC_TX_MATCH_FILTER, 
+	NL80211_NAN_FUNC_INSTANCE_ID, 
+	NL80211_NAN_FUNC_TERM_REASON, 
+ 
+	/* keep last */ 
+	NUM_NL80211_NAN_FUNC_ATTR, 
+	NL80211_NAN_FUNC_ATTR_MAX = NUM_NL80211_NAN_FUNC_ATTR - 1 
+}; 
+ 
+/** 
+ * enum nl80211_nan_srf_attributes - NAN Service Response filter attributes 
+ * @__NL80211_NAN_SRF_INVALID: invalid 
+ * @NL80211_NAN_SRF_INCLUDE: present if the include bit of the SRF set. 
+ *	This is a flag. 
+ * @NL80211_NAN_SRF_BF: Bloom Filter. Present if and only if 
+ *	%NL80211_NAN_SRF_MAC_ADDRS isn't present. This attribute is binary. 
+ * @NL80211_NAN_SRF_BF_IDX: index of the Bloom Filter. Mandatory if 
+ *	%NL80211_NAN_SRF_BF is present. This is a u8. 
+ * @NL80211_NAN_SRF_MAC_ADDRS: list of MAC addresses for the SRF. Present if 
+ *	and only if %NL80211_NAN_SRF_BF isn't present. This is a nested 
+ *	attribute. Each nested attribute is a MAC address. 
+ * @NUM_NL80211_NAN_SRF_ATTR: internal 
+ * @NL80211_NAN_SRF_ATTR_MAX: highest NAN SRF attribute 
+ */ 
+enum nl80211_nan_srf_attributes { 
+	__NL80211_NAN_SRF_INVALID, 
+	NL80211_NAN_SRF_INCLUDE, 
+	NL80211_NAN_SRF_BF, 
+	NL80211_NAN_SRF_BF_IDX, 
+	NL80211_NAN_SRF_MAC_ADDRS, 
+ 
+	/* keep last */ 
+	NUM_NL80211_NAN_SRF_ATTR, 
+	NL80211_NAN_SRF_ATTR_MAX = NUM_NL80211_NAN_SRF_ATTR - 1, 
+}; 
+ 
+/** 
+ * enum nl80211_nan_match_attributes - NAN match attributes 
+ * @__NL80211_NAN_MATCH_INVALID: invalid 
+ * @NL80211_NAN_MATCH_FUNC_LOCAL: the local function that had the 
+ *	match. This is a nested attribute. 
+ *	See &enum nl80211_nan_func_attributes. 
+ * @NL80211_NAN_MATCH_FUNC_PEER: the peer function 
+ *	that caused the match. This is a nested attribute. 
+ *	See &enum nl80211_nan_func_attributes. 
+ * 
+ * @NUM_NL80211_NAN_MATCH_ATTR: internal 
+ * @NL80211_NAN_MATCH_ATTR_MAX: highest NAN match attribute 
+ */ 
+enum nl80211_nan_match_attributes { 
+	__NL80211_NAN_MATCH_INVALID, 
+	NL80211_NAN_MATCH_FUNC_LOCAL, 
+	NL80211_NAN_MATCH_FUNC_PEER, 
+ 
+	/* keep last */ 
+	NUM_NL80211_NAN_MATCH_ATTR, 
+	NL80211_NAN_MATCH_ATTR_MAX = NUM_NL80211_NAN_MATCH_ATTR - 1 
+}; 
+ 
+/** 
+ * nl80211_external_auth_action - Action to perform with external 
+ *     authentication request. Used by NL80211_ATTR_EXTERNAL_AUTH_ACTION. 
+ * @NL80211_EXTERNAL_AUTH_START: Start the authentication. 
+ * @NL80211_EXTERNAL_AUTH_ABORT: Abort the ongoing authentication. 
+ */ 
+enum nl80211_external_auth_action { 
+	NL80211_EXTERNAL_AUTH_START, 
+	NL80211_EXTERNAL_AUTH_ABORT, 
+}; 
+ 
+/** 
+ * enum nl80211_ftm_responder_attributes - fine timing measurement 
+ *	responder attributes 
+ * @__NL80211_FTM_RESP_ATTR_INVALID: Invalid 
+ * @NL80211_FTM_RESP_ATTR_ENABLED: FTM responder is enabled 
+ * @NL80211_FTM_RESP_ATTR_LCI: The content of Measurement Report Element 
+ *	(9.4.2.22 in 802.11-2016) with type 8 - LCI (9.4.2.22.10), 
+ *	i.e. starting with the measurement token 
+ * @NL80211_FTM_RESP_ATTR_CIVIC: The content of Measurement Report Element 
+ *	(9.4.2.22 in 802.11-2016) with type 11 - Civic (Section 9.4.2.22.13), 
+ *	i.e. starting with the measurement token 
+ * @__NL80211_FTM_RESP_ATTR_LAST: Internal 
+ * @NL80211_FTM_RESP_ATTR_MAX: highest FTM responder attribute. 
+ */ 
+enum nl80211_ftm_responder_attributes { 
+	__NL80211_FTM_RESP_ATTR_INVALID, 
+ 
+	NL80211_FTM_RESP_ATTR_ENABLED, 
+	NL80211_FTM_RESP_ATTR_LCI, 
+	NL80211_FTM_RESP_ATTR_CIVICLOC, 
+ 
+	/* keep last */ 
+	__NL80211_FTM_RESP_ATTR_LAST, 
+	NL80211_FTM_RESP_ATTR_MAX = __NL80211_FTM_RESP_ATTR_LAST - 1, 
+}; 
+ 
+/* 
+ * enum nl80211_ftm_responder_stats - FTM responder statistics 
+ * 
+ * These attribute types are used with %NL80211_ATTR_FTM_RESPONDER_STATS 
+ * when getting FTM responder statistics. 
+ * 
+ * @__NL80211_FTM_STATS_INVALID: attribute number 0 is reserved 
+ * @NL80211_FTM_STATS_SUCCESS_NUM: number of FTM sessions in which all frames 
+ *	were ssfully answered (u32) 
+ * @NL80211_FTM_STATS_PARTIAL_NUM: number of FTM sessions in which part of the 
+ *	frames were successfully answered (u32) 
+ * @NL80211_FTM_STATS_FAILED_NUM: number of failed FTM sessions (u32) 
+ * @NL80211_FTM_STATS_ASAP_NUM: number of ASAP sessions (u32) 
+ * @NL80211_FTM_STATS_NON_ASAP_NUM: number of non-ASAP sessions (u32) 
+ * @NL80211_FTM_STATS_TOTAL_DURATION_MSEC: total sessions durations - gives an 
+ *	indication of how much time the responder was busy (u64, msec) 
+ * @NL80211_FTM_STATS_UNKNOWN_TRIGGERS_NUM: number of unknown FTM triggers - 
+ *	triggers from initiators that didn't finish successfully the negotiation 
+ *	phase with the responder (u32) 
+ * @NL80211_FTM_STATS_RESCHEDULE_REQUESTS_NUM: number of FTM reschedule requests 
+ *	- initiator asks for a new scheduling although it already has scheduled 
+ *	FTM slot (u32) 
+ * @NL80211_FTM_STATS_OUT_OF_WINDOW_TRIGGERS_NUM: number of FTM triggers out of 
+ *	scheduled window (u32) 
+ * @NL80211_FTM_STATS_PAD: used for padding, ignore 
+ * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal 
+ * @NL80211_FTM_STATS_MAX: highest possible FTM responder stats attribute 
+ */ 
+enum nl80211_ftm_responder_stats { 
+	__NL80211_FTM_STATS_INVALID, 
+	NL80211_FTM_STATS_SUCCESS_NUM, 
+	NL80211_FTM_STATS_PARTIAL_NUM, 
+	NL80211_FTM_STATS_FAILED_NUM, 
+	NL80211_FTM_STATS_ASAP_NUM, 
+	NL80211_FTM_STATS_NON_ASAP_NUM, 
+	NL80211_FTM_STATS_TOTAL_DURATION_MSEC, 
+	NL80211_FTM_STATS_UNKNOWN_TRIGGERS_NUM, 
+	NL80211_FTM_STATS_RESCHEDULE_REQUESTS_NUM, 
+	NL80211_FTM_STATS_OUT_OF_WINDOW_TRIGGERS_NUM, 
+	NL80211_FTM_STATS_PAD, 
+ 
+	/* keep last */ 
+	__NL80211_FTM_STATS_AFTER_LAST, 
+	NL80211_FTM_STATS_MAX = __NL80211_FTM_STATS_AFTER_LAST - 1 
+}; 
+ 
+/** 
+ * enum nl80211_preamble - frame preamble types 
+ * @NL80211_PREAMBLE_LEGACY: legacy (HR/DSSS, OFDM, ERP PHY) preamble 
+ * @NL80211_PREAMBLE_HT: HT preamble 
+ * @NL80211_PREAMBLE_VHT: VHT preamble 
+ * @NL80211_PREAMBLE_DMG: DMG preamble 
+ * @NL80211_PREAMBLE_HE: HE preamble 
+ */ 
+enum nl80211_preamble { 
+	NL80211_PREAMBLE_LEGACY, 
+	NL80211_PREAMBLE_HT, 
+	NL80211_PREAMBLE_VHT, 
+	NL80211_PREAMBLE_DMG, 
+	NL80211_PREAMBLE_HE, 
+}; 
+ 
+/** 
+ * enum nl80211_peer_measurement_type - peer measurement types 
+ * @NL80211_PMSR_TYPE_INVALID: invalid/unused, needed as we use 
+ *	these numbers also for attributes 
+ * 
+ * @NL80211_PMSR_TYPE_FTM: flight time measurement 
+ * 
+ * @NUM_NL80211_PMSR_TYPES: internal 
+ * @NL80211_PMSR_TYPE_MAX: highest type number 
+ */ 
+enum nl80211_peer_measurement_type { 
+	NL80211_PMSR_TYPE_INVALID, 
+ 
+	NL80211_PMSR_TYPE_FTM, 
+ 
+	NUM_NL80211_PMSR_TYPES, 
+	NL80211_PMSR_TYPE_MAX = NUM_NL80211_PMSR_TYPES - 1 
+}; 
+ 
+/** 
+ * enum nl80211_peer_measurement_status - peer measurement status 
+ * @NL80211_PMSR_STATUS_SUCCESS: measurement completed successfully 
+ * @NL80211_PMSR_STATUS_REFUSED: measurement was locally refused 
+ * @NL80211_PMSR_STATUS_TIMEOUT: measurement timed out 
+ * @NL80211_PMSR_STATUS_FAILURE: measurement failed, a type-dependent 
+ *	reason may be available in the response data 
+ */ 
+enum nl80211_peer_measurement_status { 
+	NL80211_PMSR_STATUS_SUCCESS, 
+	NL80211_PMSR_STATUS_REFUSED, 
+	NL80211_PMSR_STATUS_TIMEOUT, 
+	NL80211_PMSR_STATUS_FAILURE, 
+}; 
+ 
+/** 
+ * enum nl80211_peer_measurement_req - peer measurement request attributes 
+ * @__NL80211_PMSR_REQ_ATTR_INVALID: invalid 
+ * 
+ * @NL80211_PMSR_REQ_ATTR_DATA: This is a nested attribute with measurement 
+ *	type-specific request data inside. The attributes used are from the 
+ *	enums named nl80211_peer_measurement_<type>_req. 
+ * @NL80211_PMSR_REQ_ATTR_GET_AP_TSF: include AP TSF timestamp, if supported 
+ *	(flag attribute) 
+ * 
+ * @NUM_NL80211_PMSR_REQ_ATTRS: internal 
+ * @NL80211_PMSR_REQ_ATTR_MAX: highest attribute number 
+ */ 
+enum nl80211_peer_measurement_req { 
+	__NL80211_PMSR_REQ_ATTR_INVALID, 
+ 
+	NL80211_PMSR_REQ_ATTR_DATA, 
+	NL80211_PMSR_REQ_ATTR_GET_AP_TSF, 
+ 
+	/* keep last */ 
+	NUM_NL80211_PMSR_REQ_ATTRS, 
+	NL80211_PMSR_REQ_ATTR_MAX = NUM_NL80211_PMSR_REQ_ATTRS - 1 
+}; 
+ 
+/** 
+ * enum nl80211_peer_measurement_resp - peer measurement response attributes 
+ * @__NL80211_PMSR_RESP_ATTR_INVALID: invalid 
+ * 
+ * @NL80211_PMSR_RESP_ATTR_DATA: This is a nested attribute with measurement 
+ *	type-specific results inside. The attributes used are from the enums 
+ *	named nl80211_peer_measurement_<type>_resp. 
+ * @NL80211_PMSR_RESP_ATTR_STATUS: u32 value with the measurement status 
+ *	(using values from &enum nl80211_peer_measurement_status.) 
+ * @NL80211_PMSR_RESP_ATTR_HOST_TIME: host time (%CLOCK_BOOTTIME) when the 
+ *	result was measured; this value is not expected to be accurate to 
+ *	more than 20ms. (u64, nanoseconds) 
+ * @NL80211_PMSR_RESP_ATTR_AP_TSF: TSF of the AP that the interface 
+ *	doing the measurement is connected to when the result was measured. 
+ *	This shall be accurately reported if supported and requested 
+ *	(u64, usec) 
+ * @NL80211_PMSR_RESP_ATTR_FINAL: If results are sent to the host partially 
+ *	(*e.g. with FTM per-burst data) this flag will be cleared on all but 
+ *	the last result; if all results are combined it's set on the single 
+ *	result. 
+ * @NL80211_PMSR_RESP_ATTR_PAD: padding for 64-bit attributes, ignore 
+ * 
+ * @NUM_NL80211_PMSR_RESP_ATTRS: internal 
+ * @NL80211_PMSR_RESP_ATTR_MAX: highest attribute number 
+ */ 
+enum nl80211_peer_measurement_resp { 
+	__NL80211_PMSR_RESP_ATTR_INVALID, 
+ 
+	NL80211_PMSR_RESP_ATTR_DATA, 
+	NL80211_PMSR_RESP_ATTR_STATUS, 
+	NL80211_PMSR_RESP_ATTR_HOST_TIME, 
+	NL80211_PMSR_RESP_ATTR_AP_TSF, 
+	NL80211_PMSR_RESP_ATTR_FINAL, 
+	NL80211_PMSR_RESP_ATTR_PAD, 
+ 
+	/* keep last */ 
+	NUM_NL80211_PMSR_RESP_ATTRS, 
+	NL80211_PMSR_RESP_ATTR_MAX = NUM_NL80211_PMSR_RESP_ATTRS - 1 
+}; 
+ 
+/** 
+ * enum nl80211_peer_measurement_peer_attrs - peer attributes for measurement 
+ * @__NL80211_PMSR_PEER_ATTR_INVALID: invalid 
+ * 
+ * @NL80211_PMSR_PEER_ATTR_ADDR: peer's MAC address 
+ * @NL80211_PMSR_PEER_ATTR_CHAN: channel definition, nested, using top-level 
+ *	attributes like %NL80211_ATTR_WIPHY_FREQ etc. 
+ * @NL80211_PMSR_PEER_ATTR_REQ: This is a nested attribute indexed by 
+ *	measurement type, with attributes from the 
+ *	&enum nl80211_peer_measurement_req inside. 
+ * @NL80211_PMSR_PEER_ATTR_RESP: This is a nested attribute indexed by 
+ *	measurement type, with attributes from the 
+ *	&enum nl80211_peer_measurement_resp inside. 
+ * 
+ * @NUM_NL80211_PMSR_PEER_ATTRS: internal 
+ * @NL80211_PMSR_PEER_ATTR_MAX: highest attribute number 
+ */ 
+enum nl80211_peer_measurement_peer_attrs { 
+	__NL80211_PMSR_PEER_ATTR_INVALID, 
+ 
+	NL80211_PMSR_PEER_ATTR_ADDR, 
+	NL80211_PMSR_PEER_ATTR_CHAN, 
+	NL80211_PMSR_PEER_ATTR_REQ, 
+	NL80211_PMSR_PEER_ATTR_RESP, 
+ 
+	/* keep last */ 
+	NUM_NL80211_PMSR_PEER_ATTRS, 
+	NL80211_PMSR_PEER_ATTR_MAX = NUM_NL80211_PMSR_PEER_ATTRS - 1, 
+}; 
+ 
+/** 
+ * enum nl80211_peer_measurement_attrs - peer measurement attributes 
+ * @__NL80211_PMSR_ATTR_INVALID: invalid 
+ * 
+ * @NL80211_PMSR_ATTR_MAX_PEERS: u32 attribute used for capability 
+ *	advertisement only, indicates the maximum number of peers 
+ *	measurements can be done with in a single request 
+ * @NL80211_PMSR_ATTR_REPORT_AP_TSF: flag attribute in capability 
+ *	indicating that the connected AP's TSF can be reported in 
+ *	measurement results 
+ * @NL80211_PMSR_ATTR_RANDOMIZE_MAC_ADDR: flag attribute in capability 
+ *	indicating that MAC address randomization is supported. 
+ * @NL80211_PMSR_ATTR_TYPE_CAPA: capabilities reported by the device, 
+ *	this contains a nesting indexed by measurement type, and 
+ *	type-specific capabilities inside, which are from the enums 
+ *	named nl80211_peer_measurement_<type>_capa. 
+ * @NL80211_PMSR_ATTR_PEERS: nested attribute, the nesting index is 
+ *	meaningless, just a list of peers to measure with, with the 
+ *	sub-attributes taken from 
+ *	&enum nl80211_peer_measurement_peer_attrs. 
+ * 
+ * @NUM_NL80211_PMSR_ATTR: internal 
+ * @NL80211_PMSR_ATTR_MAX: highest attribute number 
+ */ 
+enum nl80211_peer_measurement_attrs { 
+	__NL80211_PMSR_ATTR_INVALID, 
+ 
+	NL80211_PMSR_ATTR_MAX_PEERS, 
+	NL80211_PMSR_ATTR_REPORT_AP_TSF, 
+	NL80211_PMSR_ATTR_RANDOMIZE_MAC_ADDR, 
+	NL80211_PMSR_ATTR_TYPE_CAPA, 
+	NL80211_PMSR_ATTR_PEERS, 
+ 
+	/* keep last */ 
+	NUM_NL80211_PMSR_ATTR, 
+	NL80211_PMSR_ATTR_MAX = NUM_NL80211_PMSR_ATTR - 1 
+}; 
+ 
+/** 
+ * enum nl80211_peer_measurement_ftm_capa - FTM capabilities 
+ * @__NL80211_PMSR_FTM_CAPA_ATTR_INVALID: invalid 
+ * 
+ * @NL80211_PMSR_FTM_CAPA_ATTR_ASAP: flag attribute indicating ASAP mode 
+ *	is supported 
+ * @NL80211_PMSR_FTM_CAPA_ATTR_NON_ASAP: flag attribute indicating non-ASAP 
+ *	mode is supported 
+ * @NL80211_PMSR_FTM_CAPA_ATTR_REQ_LCI: flag attribute indicating if LCI 
+ *	data can be requested during the measurement 
+ * @NL80211_PMSR_FTM_CAPA_ATTR_REQ_CIVICLOC: flag attribute indicating if civic 
+ *	location data can be requested during the measurement 
+ * @NL80211_PMSR_FTM_CAPA_ATTR_PREAMBLES: u32 bitmap attribute of bits 
+ *	from &enum nl80211_preamble. 
+ * @NL80211_PMSR_FTM_CAPA_ATTR_BANDWIDTHS: bitmap of values from 
+ *	&enum nl80211_chan_width indicating the supported channel 
+ *	bandwidths for FTM. Note that a higher channel bandwidth may be 
+ *	configured to allow for other measurements types with different 
+ *	bandwidth requirement in the same measurement. 
+ * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT: u32 attribute indicating 
+ *	the maximum bursts exponent that can be used (if not present anything 
+ *	is valid) 
+ * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST: u32 attribute indicating 
+ *	the maximum FTMs per burst (if not present anything is valid) 
+ * @NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED: flag attribute indicating if 
+ *	trigger based ranging measurement is supported 
+ * @NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED: flag attribute indicating 
+ *	if non trigger based ranging measurement is supported 
+ * 
+ * @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal 
+ * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number 
+ */ 
+enum nl80211_peer_measurement_ftm_capa { 
+	__NL80211_PMSR_FTM_CAPA_ATTR_INVALID, 
+ 
+	NL80211_PMSR_FTM_CAPA_ATTR_ASAP, 
+	NL80211_PMSR_FTM_CAPA_ATTR_NON_ASAP, 
+	NL80211_PMSR_FTM_CAPA_ATTR_REQ_LCI, 
+	NL80211_PMSR_FTM_CAPA_ATTR_REQ_CIVICLOC, 
+	NL80211_PMSR_FTM_CAPA_ATTR_PREAMBLES, 
+	NL80211_PMSR_FTM_CAPA_ATTR_BANDWIDTHS, 
+	NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT, 
+	NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST, 
+	NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED, 
+	NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED, 
+ 
+	/* keep last */ 
+	NUM_NL80211_PMSR_FTM_CAPA_ATTR, 
+	NL80211_PMSR_FTM_CAPA_ATTR_MAX = NUM_NL80211_PMSR_FTM_CAPA_ATTR - 1 
+}; 
+ 
+/** 
+ * enum nl80211_peer_measurement_ftm_req - FTM request attributes 
+ * @__NL80211_PMSR_FTM_REQ_ATTR_INVALID: invalid 
+ * 
+ * @NL80211_PMSR_FTM_REQ_ATTR_ASAP: ASAP mode requested (flag) 
+ * @NL80211_PMSR_FTM_REQ_ATTR_PREAMBLE: preamble type (see 
+ *	&enum nl80211_preamble), optional for DMG (u32) 
+ * @NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP: number of bursts exponent as in 
+ *	802.11-2016 9.4.2.168 "Fine Timing Measurement Parameters element" 
+ *	(u8, 0-15, optional with default 15 i.e. "no preference") 
+ * @NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD: interval between bursts in units 
+ *	of 100ms (u16, optional with default 0) 
+ * @NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION: burst duration, as in 802.11-2016 
+ *	Table 9-257 "Burst Duration field encoding" (u8, 0-15, optional with 
+ *	default 15 i.e. "no preference") 
+ * @NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST: number of successful FTM frames 
+ *	requested per burst 
+ *	(u8, 0-31, optional with default 0 i.e. "no preference") 
+ * @NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES: number of FTMR frame retries 
+ *	(u8, default 3) 
+ * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI: request LCI data (flag) 
+ * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC: request civic location data 
+ *	(flag) 
+ * @NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED: request trigger based ranging 
+ *	measurement (flag). 
+ *	This attribute and %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED are 
+ *	mutually exclusive. 
+ *      if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor 
+ *	%NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based 
+ *	ranging will be used. 
+ * @NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED: request non trigger based 
+ *	ranging measurement (flag) 
+ *	This attribute and %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED are 
+ *	mutually exclusive. 
+ *      if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor 
+ *	%NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based 
+ *	ranging will be used. 
+ * 
+ * @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal 
+ * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number 
+ */ 
+enum nl80211_peer_measurement_ftm_req { 
+	__NL80211_PMSR_FTM_REQ_ATTR_INVALID, 
+ 
+	NL80211_PMSR_FTM_REQ_ATTR_ASAP, 
+	NL80211_PMSR_FTM_REQ_ATTR_PREAMBLE, 
+	NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP, 
+	NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD, 
+	NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION, 
+	NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST, 
+	NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES, 
+	NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI, 
+	NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC, 
+	NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED, 
+	NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED, 
+ 
+	/* keep last */ 
+	NUM_NL80211_PMSR_FTM_REQ_ATTR, 
+	NL80211_PMSR_FTM_REQ_ATTR_MAX = NUM_NL80211_PMSR_FTM_REQ_ATTR - 1 
+}; 
+ 
+/** 
+ * enum nl80211_peer_measurement_ftm_failure_reasons - FTM failure reasons 
+ * @NL80211_PMSR_FTM_FAILURE_UNSPECIFIED: unspecified failure, not used 
+ * @NL80211_PMSR_FTM_FAILURE_NO_RESPONSE: no response from the FTM responder 
+ * @NL80211_PMSR_FTM_FAILURE_REJECTED: FTM responder rejected measurement 
+ * @NL80211_PMSR_FTM_FAILURE_WRONG_CHANNEL: we already know the peer is 
+ *	on a different channel, so can't measure (if we didn't know, we'd 
+ *	try and get no response) 
+ * @NL80211_PMSR_FTM_FAILURE_PEER_NOT_CAPABLE: peer can't actually do FTM 
+ * @NL80211_PMSR_FTM_FAILURE_INVALID_TIMESTAMP: invalid T1/T4 timestamps 
+ *	received 
+ * @NL80211_PMSR_FTM_FAILURE_PEER_BUSY: peer reports busy, you may retry 
+ *	later (see %NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME) 
+ * @NL80211_PMSR_FTM_FAILURE_BAD_CHANGED_PARAMS: parameters were changed 
+ *	by the peer and are no longer supported 
+ */ 
+enum nl80211_peer_measurement_ftm_failure_reasons { 
+	NL80211_PMSR_FTM_FAILURE_UNSPECIFIED, 
+	NL80211_PMSR_FTM_FAILURE_NO_RESPONSE, 
+	NL80211_PMSR_FTM_FAILURE_REJECTED, 
+	NL80211_PMSR_FTM_FAILURE_WRONG_CHANNEL, 
+	NL80211_PMSR_FTM_FAILURE_PEER_NOT_CAPABLE, 
+	NL80211_PMSR_FTM_FAILURE_INVALID_TIMESTAMP, 
+	NL80211_PMSR_FTM_FAILURE_PEER_BUSY, 
+	NL80211_PMSR_FTM_FAILURE_BAD_CHANGED_PARAMS, 
+}; 
+ 
+/** 
+ * enum nl80211_peer_measurement_ftm_resp - FTM response attributes 
+ * @__NL80211_PMSR_FTM_RESP_ATTR_INVALID: invalid 
+ * 
+ * @NL80211_PMSR_FTM_RESP_ATTR_FAIL_REASON: FTM-specific failure reason 
+ *	(u32, optional) 
+ * @NL80211_PMSR_FTM_RESP_ATTR_BURST_INDEX: optional, if bursts are reported 
+ *	as separate results then it will be the burst index 0...(N-1) and 
+ *	the top level will indicate partial results (u32) 
+ * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_ATTEMPTS: number of FTM Request frames 
+ *	transmitted (u32, optional) 
+ * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_SUCCESSES: number of FTM Request frames 
+ *	that were acknowleged (u32, optional) 
+ * @NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME: retry time received from the 
+ *	busy peer (u32, seconds) 
+ * @NL80211_PMSR_FTM_RESP_ATTR_NUM_BURSTS_EXP: actual number of bursts exponent 
+ *	used by the responder (similar to request, u8) 
+ * @NL80211_PMSR_FTM_RESP_ATTR_BURST_DURATION: actual burst duration used by 
+ *	the responder (similar to request, u8) 
+ * @NL80211_PMSR_FTM_RESP_ATTR_FTMS_PER_BURST: actual FTMs per burst used 
+ *	by the responder (similar to request, u8) 
+ * @NL80211_PMSR_FTM_RESP_ATTR_RSSI_AVG: average RSSI across all FTM action 
+ *	frames (optional, s32, 1/2 dBm) 
+ * @NL80211_PMSR_FTM_RESP_ATTR_RSSI_SPREAD: RSSI spread across all FTM action 
+ *	frames (optional, s32, 1/2 dBm) 
+ * @NL80211_PMSR_FTM_RESP_ATTR_TX_RATE: bitrate we used for the response to the 
+ *	FTM action frame (optional, nested, using &enum nl80211_rate_info 
+ *	attributes) 
+ * @NL80211_PMSR_FTM_RESP_ATTR_RX_RATE: bitrate the responder used for the FTM 
+ *	action frame (optional, nested, using &enum nl80211_rate_info attrs) 
+ * @NL80211_PMSR_FTM_RESP_ATTR_RTT_AVG: average RTT (s64, picoseconds, optional 
+ *	but one of RTT/DIST must be present) 
+ * @NL80211_PMSR_FTM_RESP_ATTR_RTT_VARIANCE: RTT variance (u64, ps^2, note that 
+ *	standard deviation is the square root of variance, optional) 
+ * @NL80211_PMSR_FTM_RESP_ATTR_RTT_SPREAD: RTT spread (u64, picoseconds, 
+ *	optional) 
+ * @NL80211_PMSR_FTM_RESP_ATTR_DIST_AVG: average distance (s64, mm, optional 
+ *	but one of RTT/DIST must be present) 
+ * @NL80211_PMSR_FTM_RESP_ATTR_DIST_VARIANCE: distance variance (u64, mm^2, note 
+ *	that standard deviation is the square root of variance, optional) 
+ * @NL80211_PMSR_FTM_RESP_ATTR_DIST_SPREAD: distance spread (u64, mm, optional) 
+ * @NL80211_PMSR_FTM_RESP_ATTR_LCI: LCI data from peer (binary, optional); 
+ *	this is the contents of the Measurement Report Element (802.11-2016 
+ *	9.4.2.22.1) starting with the Measurement Token, with Measurement 
+ *	Type 8. 
+ * @NL80211_PMSR_FTM_RESP_ATTR_CIVICLOC: civic location data from peer 
+ *	(binary, optional); 
+ *	this is the contents of the Measurement Report Element (802.11-2016 
+ *	9.4.2.22.1) starting with the Measurement Token, with Measurement 
+ *	Type 11. 
+ * @NL80211_PMSR_FTM_RESP_ATTR_PAD: ignore, for u64/s64 padding only 
+ * 
+ * @NUM_NL80211_PMSR_FTM_RESP_ATTR: internal 
+ * @NL80211_PMSR_FTM_RESP_ATTR_MAX: highest attribute number 
+ */ 
+enum nl80211_peer_measurement_ftm_resp { 
+	__NL80211_PMSR_FTM_RESP_ATTR_INVALID, 
+ 
+	NL80211_PMSR_FTM_RESP_ATTR_FAIL_REASON, 
+	NL80211_PMSR_FTM_RESP_ATTR_BURST_INDEX, 
+	NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_ATTEMPTS, 
+	NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_SUCCESSES, 
+	NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME, 
+	NL80211_PMSR_FTM_RESP_ATTR_NUM_BURSTS_EXP, 
+	NL80211_PMSR_FTM_RESP_ATTR_BURST_DURATION, 
+	NL80211_PMSR_FTM_RESP_ATTR_FTMS_PER_BURST, 
+	NL80211_PMSR_FTM_RESP_ATTR_RSSI_AVG, 
+	NL80211_PMSR_FTM_RESP_ATTR_RSSI_SPREAD, 
+	NL80211_PMSR_FTM_RESP_ATTR_TX_RATE, 
+	NL80211_PMSR_FTM_RESP_ATTR_RX_RATE, 
+	NL80211_PMSR_FTM_RESP_ATTR_RTT_AVG, 
+	NL80211_PMSR_FTM_RESP_ATTR_RTT_VARIANCE, 
+	NL80211_PMSR_FTM_RESP_ATTR_RTT_SPREAD, 
+	NL80211_PMSR_FTM_RESP_ATTR_DIST_AVG, 
+	NL80211_PMSR_FTM_RESP_ATTR_DIST_VARIANCE, 
+	NL80211_PMSR_FTM_RESP_ATTR_DIST_SPREAD, 
+	NL80211_PMSR_FTM_RESP_ATTR_LCI, 
+	NL80211_PMSR_FTM_RESP_ATTR_CIVICLOC, 
+	NL80211_PMSR_FTM_RESP_ATTR_PAD, 
+ 
+	/* keep last */ 
+	NUM_NL80211_PMSR_FTM_RESP_ATTR, 
+	NL80211_PMSR_FTM_RESP_ATTR_MAX = NUM_NL80211_PMSR_FTM_RESP_ATTR - 1 
+}; 
+ 
+/** 
+ * enum nl80211_obss_pd_attributes - OBSS packet detection attributes 
+ * @__NL80211_HE_OBSS_PD_ATTR_INVALID: Invalid 
+ * 
+ * @NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET: the OBSS PD minimum tx power offset. 
+ * @NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET: the OBSS PD maximum tx power offset. 
+ * 
+ * @__NL80211_HE_OBSS_PD_ATTR_LAST: Internal 
+ * @NL80211_HE_OBSS_PD_ATTR_MAX: highest OBSS PD attribute. 
+ */ 
+enum nl80211_obss_pd_attributes { 
+	__NL80211_HE_OBSS_PD_ATTR_INVALID, 
+ 
+	NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET, 
+	NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET, 
+ 
+	/* keep last */ 
+	__NL80211_HE_OBSS_PD_ATTR_LAST, 
+	NL80211_HE_OBSS_PD_ATTR_MAX = __NL80211_HE_OBSS_PD_ATTR_LAST - 1, 
+}; 
+ 
+/** 
+ * enum nl80211_bss_color_attributes - BSS Color attributes 
+ * @__NL80211_HE_BSS_COLOR_ATTR_INVALID: Invalid 
+ * 
+ * @NL80211_HE_BSS_COLOR_ATTR_COLOR: the current BSS Color. 
+ * @NL80211_HE_BSS_COLOR_ATTR_DISABLED: is BSS coloring disabled. 
+ * @NL80211_HE_BSS_COLOR_ATTR_PARTIAL: the AID equation to be used.. 
+ * 
+ * @__NL80211_HE_BSS_COLOR_ATTR_LAST: Internal 
+ * @NL80211_HE_BSS_COLOR_ATTR_MAX: highest BSS Color attribute. 
+ */ 
+enum nl80211_bss_color_attributes { 
+	__NL80211_HE_BSS_COLOR_ATTR_INVALID, 
+ 
+	NL80211_HE_BSS_COLOR_ATTR_COLOR, 
+	NL80211_HE_BSS_COLOR_ATTR_DISABLED, 
+	NL80211_HE_BSS_COLOR_ATTR_PARTIAL, 
+ 
+	/* keep last */ 
+	__NL80211_HE_BSS_COLOR_ATTR_LAST, 
+	NL80211_HE_BSS_COLOR_ATTR_MAX = __NL80211_HE_BSS_COLOR_ATTR_LAST - 1, 
+}; 
+ 
+/** 
+ * enum nl80211_iftype_akm_attributes - interface type AKM attributes 
+ * @__NL80211_IFTYPE_AKM_ATTR_INVALID: Invalid 
+ * 
+ * @NL80211_IFTYPE_AKM_ATTR_IFTYPES: nested attribute containing a flag 
+ *	attribute for each interface type that supports AKM suites specified in 
+ *	%NL80211_IFTYPE_AKM_ATTR_SUITES 
+ * @NL80211_IFTYPE_AKM_ATTR_SUITES: an array of u32. Used to indicate supported 
+ *	AKM suites for the specified interface types. 
+ * 
+ * @__NL80211_IFTYPE_AKM_ATTR_LAST: Internal 
+ * @NL80211_IFTYPE_AKM_ATTR_MAX: highest interface type AKM attribute. 
+ */ 
+enum nl80211_iftype_akm_attributes { 
+	__NL80211_IFTYPE_AKM_ATTR_INVALID, 
+ 
+	NL80211_IFTYPE_AKM_ATTR_IFTYPES, 
+	NL80211_IFTYPE_AKM_ATTR_SUITES, 
+ 
+	/* keep last */ 
+	__NL80211_IFTYPE_AKM_ATTR_LAST, 
+	NL80211_IFTYPE_AKM_ATTR_MAX = __NL80211_IFTYPE_AKM_ATTR_LAST - 1, 
+}; 
+ 
+#endif /* __LINUX_NL80211_H */