add sanitizers dependencies

1 files changed, 237 insertions, 0 deletions

diff --git a/contrib/libs/linux-headers/linux/lirc.h b/contrib/libs/linux-headers/linux/lirc.h
new file mode 100644
index 0000000000..8d7ca7c6af
--- /dev/null
+++ b/contrib/libs/linux-headers/linux/lirc.h
@@ -0,0 +1,237 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * lirc.h - linux infrared remote control header file
+ */
+
+#ifndef _LINUX_LIRC_H
+#define _LINUX_LIRC_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+#define PULSE_BIT       0x01000000
+#define PULSE_MASK      0x00FFFFFF
+
+#define LIRC_MODE2_SPACE     0x00000000
+#define LIRC_MODE2_PULSE     0x01000000
+#define LIRC_MODE2_FREQUENCY 0x02000000
+#define LIRC_MODE2_TIMEOUT   0x03000000
+#define LIRC_MODE2_OVERFLOW  0x04000000
+
+#define LIRC_VALUE_MASK      0x00FFFFFF
+#define LIRC_MODE2_MASK      0xFF000000
+
+#define LIRC_SPACE(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_SPACE)
+#define LIRC_PULSE(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_PULSE)
+#define LIRC_FREQUENCY(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_FREQUENCY)
+#define LIRC_TIMEOUT(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_TIMEOUT)
+#define LIRC_OVERFLOW(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_OVERFLOW)
+
+#define LIRC_VALUE(val) ((val)&LIRC_VALUE_MASK)
+#define LIRC_MODE2(val) ((val)&LIRC_MODE2_MASK)
+
+#define LIRC_IS_SPACE(val) (LIRC_MODE2(val) == LIRC_MODE2_SPACE)
+#define LIRC_IS_PULSE(val) (LIRC_MODE2(val) == LIRC_MODE2_PULSE)
+#define LIRC_IS_FREQUENCY(val) (LIRC_MODE2(val) == LIRC_MODE2_FREQUENCY)
+#define LIRC_IS_TIMEOUT(val) (LIRC_MODE2(val) == LIRC_MODE2_TIMEOUT)
+#define LIRC_IS_OVERFLOW(val) (LIRC_MODE2(val) == LIRC_MODE2_OVERFLOW)
+
+/* used heavily by lirc userspace */
+#define lirc_t int
+
+/*** lirc compatible hardware features ***/
+
+#define LIRC_MODE2SEND(x) (x)
+#define LIRC_SEND2MODE(x) (x)
+#define LIRC_MODE2REC(x) ((x) << 16)
+#define LIRC_REC2MODE(x) ((x) >> 16)
+
+#define LIRC_MODE_RAW                  0x00000001
+#define LIRC_MODE_PULSE                0x00000002
+#define LIRC_MODE_MODE2                0x00000004
+#define LIRC_MODE_SCANCODE             0x00000008
+#define LIRC_MODE_LIRCCODE             0x00000010
+
+
+#define LIRC_CAN_SEND_RAW              LIRC_MODE2SEND(LIRC_MODE_RAW)
+#define LIRC_CAN_SEND_PULSE            LIRC_MODE2SEND(LIRC_MODE_PULSE)
+#define LIRC_CAN_SEND_MODE2            LIRC_MODE2SEND(LIRC_MODE_MODE2)
+#define LIRC_CAN_SEND_LIRCCODE         LIRC_MODE2SEND(LIRC_MODE_LIRCCODE)
+
+#define LIRC_CAN_SEND_MASK             0x0000003f
+
+#define LIRC_CAN_SET_SEND_CARRIER      0x00000100
+#define LIRC_CAN_SET_SEND_DUTY_CYCLE   0x00000200
+#define LIRC_CAN_SET_TRANSMITTER_MASK  0x00000400
+
+#define LIRC_CAN_REC_RAW               LIRC_MODE2REC(LIRC_MODE_RAW)
+#define LIRC_CAN_REC_PULSE             LIRC_MODE2REC(LIRC_MODE_PULSE)
+#define LIRC_CAN_REC_MODE2             LIRC_MODE2REC(LIRC_MODE_MODE2)
+#define LIRC_CAN_REC_SCANCODE          LIRC_MODE2REC(LIRC_MODE_SCANCODE)
+#define LIRC_CAN_REC_LIRCCODE          LIRC_MODE2REC(LIRC_MODE_LIRCCODE)
+
+#define LIRC_CAN_REC_MASK              LIRC_MODE2REC(LIRC_CAN_SEND_MASK)
+
+#define LIRC_CAN_SET_REC_CARRIER       (LIRC_CAN_SET_SEND_CARRIER << 16)
+
+#define LIRC_CAN_SET_REC_CARRIER_RANGE    0x80000000
+#define LIRC_CAN_GET_REC_RESOLUTION       0x20000000
+#define LIRC_CAN_SET_REC_TIMEOUT          0x10000000
+
+#define LIRC_CAN_MEASURE_CARRIER          0x02000000
+#define LIRC_CAN_USE_WIDEBAND_RECEIVER    0x04000000
+
+#define LIRC_CAN_SEND(x) ((x)&LIRC_CAN_SEND_MASK)
+#define LIRC_CAN_REC(x) ((x)&LIRC_CAN_REC_MASK)
+
+/*
+ * Unused features. These features were never implemented, in tree or
+ * out of tree. These definitions are here so not to break the lircd build.
+ */
+#define LIRC_CAN_SET_REC_FILTER		0
+#define LIRC_CAN_NOTIFY_DECODE		0
+
+/*** IOCTL commands for lirc driver ***/
+
+#define LIRC_GET_FEATURES              _IOR('i', 0x00000000, __u32)
+
+#define LIRC_GET_SEND_MODE             _IOR('i', 0x00000001, __u32)
+#define LIRC_GET_REC_MODE              _IOR('i', 0x00000002, __u32)
+#define LIRC_GET_REC_RESOLUTION        _IOR('i', 0x00000007, __u32)
+
+#define LIRC_GET_MIN_TIMEOUT           _IOR('i', 0x00000008, __u32)
+#define LIRC_GET_MAX_TIMEOUT           _IOR('i', 0x00000009, __u32)
+
+/* code length in bits, currently only for LIRC_MODE_LIRCCODE */
+#define LIRC_GET_LENGTH                _IOR('i', 0x0000000f, __u32)
+
+#define LIRC_SET_SEND_MODE             _IOW('i', 0x00000011, __u32)
+#define LIRC_SET_REC_MODE              _IOW('i', 0x00000012, __u32)
+/* Note: these can reset the according pulse_width */
+#define LIRC_SET_SEND_CARRIER          _IOW('i', 0x00000013, __u32)
+#define LIRC_SET_REC_CARRIER           _IOW('i', 0x00000014, __u32)
+#define LIRC_SET_SEND_DUTY_CYCLE       _IOW('i', 0x00000015, __u32)
+#define LIRC_SET_TRANSMITTER_MASK      _IOW('i', 0x00000017, __u32)
+
+/*
+ * when a timeout != 0 is set the driver will send a
+ * LIRC_MODE2_TIMEOUT data packet, otherwise LIRC_MODE2_TIMEOUT is
+ * never sent, timeout is disabled by default
+ */
+#define LIRC_SET_REC_TIMEOUT           _IOW('i', 0x00000018, __u32)
+
+/* 1 enables, 0 disables timeout reports in MODE2 */
+#define LIRC_SET_REC_TIMEOUT_REPORTS   _IOW('i', 0x00000019, __u32)
+
+/*
+ * if enabled from the next key press on the driver will send
+ * LIRC_MODE2_FREQUENCY packets
+ */
+#define LIRC_SET_MEASURE_CARRIER_MODE	_IOW('i', 0x0000001d, __u32)
+
+/*
+ * to set a range use LIRC_SET_REC_CARRIER_RANGE with the
+ * lower bound first and later LIRC_SET_REC_CARRIER with the upper bound
+ */
+#define LIRC_SET_REC_CARRIER_RANGE     _IOW('i', 0x0000001f, __u32)
+
+#define LIRC_SET_WIDEBAND_RECEIVER     _IOW('i', 0x00000023, __u32)
+
+/*
+ * Return the recording timeout, which is either set by
+ * the ioctl LIRC_SET_REC_TIMEOUT or by the kernel after setting the protocols.
+ */
+#define LIRC_GET_REC_TIMEOUT	       _IOR('i', 0x00000024, __u32)
+
+/**
+ * struct lirc_scancode - decoded scancode with protocol for use with
+ *	LIRC_MODE_SCANCODE
+ *
+ * @timestamp: Timestamp in nanoseconds using CLOCK_MONOTONIC when IR
+ *	was decoded.
+ * @flags: should be 0 for transmit. When receiving scancodes,
+ *	LIRC_SCANCODE_FLAG_TOGGLE or LIRC_SCANCODE_FLAG_REPEAT can be set
+ *	depending on the protocol
+ * @rc_proto: see enum rc_proto
+ * @keycode: the translated keycode. Set to 0 for transmit.
+ * @scancode: the scancode received or to be sent
+ */
+struct lirc_scancode {
+	__u64	timestamp;
+	__u16	flags;
+	__u16	rc_proto;
+	__u32	keycode;
+	__u64	scancode;
+};
+
+/* Set if the toggle bit of rc-5 or rc-6 is enabled */
+#define LIRC_SCANCODE_FLAG_TOGGLE	1
+/* Set if this is a nec or sanyo repeat */
+#define LIRC_SCANCODE_FLAG_REPEAT	2
+
+/**
+ * enum rc_proto - the Remote Controller protocol
+ *
+ * @RC_PROTO_UNKNOWN: Protocol not known
+ * @RC_PROTO_OTHER: Protocol known but proprietary
+ * @RC_PROTO_RC5: Philips RC5 protocol
+ * @RC_PROTO_RC5X_20: Philips RC5x 20 bit protocol
+ * @RC_PROTO_RC5_SZ: StreamZap variant of RC5
+ * @RC_PROTO_JVC: JVC protocol
+ * @RC_PROTO_SONY12: Sony 12 bit protocol
+ * @RC_PROTO_SONY15: Sony 15 bit protocol
+ * @RC_PROTO_SONY20: Sony 20 bit protocol
+ * @RC_PROTO_NEC: NEC protocol
+ * @RC_PROTO_NECX: Extended NEC protocol
+ * @RC_PROTO_NEC32: NEC 32 bit protocol
+ * @RC_PROTO_SANYO: Sanyo protocol
+ * @RC_PROTO_MCIR2_KBD: RC6-ish MCE keyboard
+ * @RC_PROTO_MCIR2_MSE: RC6-ish MCE mouse
+ * @RC_PROTO_RC6_0: Philips RC6-0-16 protocol
+ * @RC_PROTO_RC6_6A_20: Philips RC6-6A-20 protocol
+ * @RC_PROTO_RC6_6A_24: Philips RC6-6A-24 protocol
+ * @RC_PROTO_RC6_6A_32: Philips RC6-6A-32 protocol
+ * @RC_PROTO_RC6_MCE: MCE (Philips RC6-6A-32 subtype) protocol
+ * @RC_PROTO_SHARP: Sharp protocol
+ * @RC_PROTO_XMP: XMP protocol
+ * @RC_PROTO_CEC: CEC protocol
+ * @RC_PROTO_IMON: iMon Pad protocol
+ * @RC_PROTO_RCMM12: RC-MM protocol 12 bits
+ * @RC_PROTO_RCMM24: RC-MM protocol 24 bits
+ * @RC_PROTO_RCMM32: RC-MM protocol 32 bits
+ * @RC_PROTO_XBOX_DVD: Xbox DVD Movie Playback Kit protocol
+ * @RC_PROTO_MAX: Maximum value of enum rc_proto
+ */
+enum rc_proto {
+	RC_PROTO_UNKNOWN	= 0,
+	RC_PROTO_OTHER		= 1,
+	RC_PROTO_RC5		= 2,
+	RC_PROTO_RC5X_20	= 3,
+	RC_PROTO_RC5_SZ		= 4,
+	RC_PROTO_JVC		= 5,
+	RC_PROTO_SONY12		= 6,
+	RC_PROTO_SONY15		= 7,
+	RC_PROTO_SONY20		= 8,
+	RC_PROTO_NEC		= 9,
+	RC_PROTO_NECX		= 10,
+	RC_PROTO_NEC32		= 11,
+	RC_PROTO_SANYO		= 12,
+	RC_PROTO_MCIR2_KBD	= 13,
+	RC_PROTO_MCIR2_MSE	= 14,
+	RC_PROTO_RC6_0		= 15,
+	RC_PROTO_RC6_6A_20	= 16,
+	RC_PROTO_RC6_6A_24	= 17,
+	RC_PROTO_RC6_6A_32	= 18,
+	RC_PROTO_RC6_MCE	= 19,
+	RC_PROTO_SHARP		= 20,
+	RC_PROTO_XMP		= 21,
+	RC_PROTO_CEC		= 22,
+	RC_PROTO_IMON		= 23,
+	RC_PROTO_RCMM12		= 24,
+	RC_PROTO_RCMM24		= 25,
+	RC_PROTO_RCMM32		= 26,
+	RC_PROTO_XBOX_DVD	= 27,
+	RC_PROTO_MAX		= RC_PROTO_XBOX_DVD,
+};
+
+#endif