fix ya.make

1 files changed, 253 insertions, 0 deletions

diff --git a/contrib/libs/icu/i18n/collationdatareader.h b/contrib/libs/icu/i18n/collationdatareader.h
new file mode 100644
index 0000000000..44e69399e3
--- /dev/null
+++ b/contrib/libs/icu/i18n/collationdatareader.h
@@ -0,0 +1,253 @@
+// © 2016 and later: Unicode, Inc. and others.
+// License & terms of use: http://www.unicode.org/copyright.html
+/*
+*******************************************************************************
+* Copyright (C) 2013-2015, International Business Machines
+* Corporation and others.  All Rights Reserved.
+*******************************************************************************
+* collationdatareader.h
+*
+* created on: 2013feb07
+* created by: Markus W. Scherer
+*/
+
+#ifndef __COLLATIONDATAREADER_H__
+#define __COLLATIONDATAREADER_H__
+
+#include "unicode/utypes.h"
+
+#if !UCONFIG_NO_COLLATION
+
+#include "unicode/udata.h"
+
+struct UDataMemory;
+
+U_NAMESPACE_BEGIN
+
+struct CollationTailoring;
+
+/**
+ * Collation binary data reader.
+ */
+struct U_I18N_API CollationDataReader /* all static */ {
+    // The following constants are also copied into source/common/ucol_swp.cpp.
+    // Keep them in sync!
+    enum {
+        /**
+         * Number of int32_t indexes.
+         *
+         * Can be 2 if there are only options.
+         * Can be 7 or 8 if there are only options and a script reordering.
+         * The loader treats any index>=indexes[IX_INDEXES_LENGTH] as 0.
+         */
+        IX_INDEXES_LENGTH,  // 0
+        /**
+         * Bits 31..24: numericPrimary, for numeric collation
+         *      23..16: fast Latin format version (0 = no fast Latin table)
+         *      15.. 0: options bit set
+         */
+        IX_OPTIONS,
+        IX_RESERVED2,
+        IX_RESERVED3,
+
+        /** Array offset to Jamo CE32s in ce32s[], or <0 if none. */
+        IX_JAMO_CE32S_START,  // 4
+
+        // Byte offsets from the start of the data, after the generic header.
+        // The indexes[] are at byte offset 0, other data follows.
+        // Each data item is aligned properly.
+        // The data items should be in descending order of unit size,
+        // to minimize the need for padding.
+        // Each item's byte length is given by the difference between its offset and
+        // the next index/offset value.
+        /** Byte offset to int32_t reorderCodes[]. */
+        IX_REORDER_CODES_OFFSET,
+        /**
+         * Byte offset to uint8_t reorderTable[].
+         * Empty table if <256 bytes (padding only).
+         * Otherwise 256 bytes or more (with padding).
+         */
+        IX_REORDER_TABLE_OFFSET,
+        /** Byte offset to the collation trie. Its length is a multiple of 8 bytes. */
+        IX_TRIE_OFFSET,
+
+        IX_RESERVED8_OFFSET,  // 8
+        /** Byte offset to int64_t ces[]. */
+        IX_CES_OFFSET,
+        IX_RESERVED10_OFFSET,
+        /** Byte offset to uint32_t ce32s[]. */
+        IX_CE32S_OFFSET,
+
+        /** Byte offset to uint32_t rootElements[]. */
+        IX_ROOT_ELEMENTS_OFFSET,  // 12
+        /** Byte offset to UChar *contexts[]. */
+        IX_CONTEXTS_OFFSET,
+        /** Byte offset to uint16_t [] with serialized unsafeBackwardSet. */
+        IX_UNSAFE_BWD_OFFSET,
+        /** Byte offset to uint16_t fastLatinTable[]. */
+        IX_FAST_LATIN_TABLE_OFFSET,
+
+        /** Byte offset to uint16_t scripts[]. */
+        IX_SCRIPTS_OFFSET,  // 16
+        /**
+         * Byte offset to UBool compressibleBytes[].
+         * Empty table if <256 bytes (padding only).
+         * Otherwise 256 bytes or more (with padding).
+         */
+        IX_COMPRESSIBLE_BYTES_OFFSET,
+        IX_RESERVED18_OFFSET,
+        IX_TOTAL_SIZE
+    };
+
+    static void read(const CollationTailoring *base, const uint8_t *inBytes, int32_t inLength,
+                     CollationTailoring &tailoring, UErrorCode &errorCode);
+
+    static UBool U_CALLCONV
+    isAcceptable(void *context, const char *type, const char *name, const UDataInfo *pInfo);
+
+private:
+    CollationDataReader();  // no constructor
+};
+
+/*
+ * Format of collation data (ucadata.icu, binary data in coll/ *.res files).
+ * Format version 5.
+ *
+ * The root collation data is stored in the ucadata.icu file.
+ * Tailorings are stored inside .res resource bundle files, with a complete file header.
+ *
+ * Collation data begins with a standard ICU data file header
+ * (DataHeader, see ucmndata.h and unicode/udata.h).
+ * The UDataInfo.dataVersion field contains the UCA and other version numbers,
+ * see the comments for CollationTailoring.version.
+ *
+ * After the header, the file contains the following parts.
+ * Constants are defined as enum values of the CollationDataReader class.
+ * See also the Collation class.
+ *
+ * int32_t indexes[indexesLength];
+ *      The indexes array has variable length.
+ *      Some tailorings only need the length and the options,
+ *      others only add reorderCodes and the reorderTable,
+ *      some need to store mappings.
+ *      Only as many indexes are stored as needed to read all of the data.
+ *
+ *      Index 0: indexesLength
+ *      Index 1: numericPrimary, CollationFastLatin::VERSION, and options: see IX_OPTIONS
+ *      Index 2..3: Unused/reserved/0.
+ *      Index 4: Index into the ce32s array where the CE32s of the conjoining Jamo
+ *               are stored in a short, contiguous part of the ce32s array.
+ *
+ *      Indexes 5..19 are byte offsets in ascending order.
+ *      Each byte offset marks the start of the next part in the data file,
+ *      and the end of the previous one.
+ *      When two consecutive byte offsets are the same (or too short),
+ *      then the corresponding part is empty.
+ *      Byte offsets are offsets from after the header,
+ *      that is, from the beginning of the indexes[].
+ *      Each part starts at an offset with proper alignment for its data.
+ *      If necessary, the previous part may include padding bytes to achieve this alignment.
+ *      The last byte offset that is stored in the indexes indicates the total size of the data
+ *      (starting with the indexes).
+ *
+ * int32_t reorderCodes[]; -- empty in root
+ *      The list of script and reordering codes.
+ *
+ *      Beginning with format version 5, this array may optionally
+ *      have trailing entries with a full list of reorder ranges
+ *      as described for CollationSettings::reorderRanges.
+ *
+ *      Script or reorder codes are first and do not exceed 16-bit values.
+ *      Range limits are stored in the upper 16 bits, and are never 0.
+ *      Split this array into reorder codes and ranges at the first entry
+ *      with non-zero upper 16 bits.
+ *
+ *      If the ranges are missing but needed for split-reordered primary lead bytes,
+ *      then they are regenerated at load time.
+ *
+ * uint8_t reorderTable[256]; -- empty in root; can be longer to include padding bytes
+ *      Primary-weight lead byte permutation table.
+ *      Normally present when the reorderCodes are, but can be built at load time.
+ *
+ *      Beginning with format version 5, a 0 entry at a non-zero index
+ *      (which is otherwise an illegal value)
+ *      means that the primary lead byte is "split"
+ *      (there are different offsets for primaries that share that lead byte)
+ *      and the reordering offset must be determined via the reorder ranges
+ *      that are either stored as part of the reorderCodes array
+ *      or regenerated at load time.
+ *
+ * UTrie2 trie; -- see utrie2_impl.h and utrie2.h
+ *      The trie holds the main collation data. Each code point is mapped to a 32-bit value.
+ *      It encodes a simple collation element (CE) in compact form, unless bits 7..6 are both set,
+ *      in which case it is a special CE32 and contains a 4-bit tag and further data.
+ *      See the Collation class for details.
+ *
+ *      The trie has a value for each lead surrogate code unit with some bits encoding
+ *      collective properties of the 1024 supplementary characters whose UTF-16 form starts with
+ *      the lead surrogate. See Collation::LEAD_SURROGATE_TAG..
+ *
+ * int64_t ces[];
+ *      64-bit CEs and expansions that cannot be stored in a more compact form.
+ *
+ * uint32_t ce32s[];
+ *      CE32s for expansions in compact form, and for characters whose trie values
+ *      contain special data.
+ *
+ * uint32_t rootElements[]; -- empty in all tailorings
+ *      Compact storage for all of the CEs that occur in the root collation.
+ *      See the CollationRootElements class.
+ *
+ * UChar *contexts[];
+ *      Serialized UCharsTrie structures with prefix (pre-context) and contraction mappings.
+ *
+ * uint16_t unsafeBackwardSet[]; -- see UnicodeSet::serialize()
+ *      Serialized form of characters that are unsafe when iterating backwards,
+ *      and at the end of an identical string prefix.
+ *      Back up to a safe character.
+ *      Lead surrogates are "unsafe" when any of their corresponding supplementary
+ *      code points are unsafe.
+ *      Does not include [:^lccc=0:][:^tccc=0:].
+ *      For each tailoring, the root unsafeBackwardSet is subtracted.
+ *      (As a result, in many tailorings no set needs to be stored.)
+ *
+ * uint16_t fastLatinTable[];
+ *      Optional optimization for Latin text.
+ *      See the CollationFastLatin class.
+ *
+ * uint16_t scripts[]; -- empty in all tailorings
+ *      Format version 5:
+ *      uint16_t numScripts;
+ *      uint16_t scriptsIndex[numScripts+16];
+ *      uint16_t scriptStarts[];
+ *      See CollationData::numScripts etc.
+ *
+ *      Format version 4:
+ *      Table of the reordering groups with their first and last lead bytes,
+ *      and their script and reordering codes.
+ *      See CollationData::scripts.
+ *
+ * UBool compressibleBytes[]; -- empty in all tailorings
+ *      Flag for getSortKey(), indicating primary weight lead bytes that are compressible.
+ *
+ * -----------------
+ * Changes for formatVersion 5 (ICU 55)
+ *
+ * Reordering moves single scripts, not groups of scripts.
+ * Reorder ranges are optionally appended to the reorderCodes,
+ * and a 0 entry in the reorderTable indicates a split lead byte.
+ * The scripts data has a new format.
+ *
+ * The rootElements may contain secondary and tertiary weights below common=05.
+ * (Used for small Hiragana letters.)
+ * Where is occurs, there is also an explicit unit with common secondary & tertiary weights.
+ * There are no other data structure changes, but builder code needs to be able to handle such data.
+ *
+ * The collation element for the merge separator code point U+FFFE
+ * does not necessarily have special, unique secondary/tertiary weights any more.
+ */
+
+U_NAMESPACE_END
+
+#endif  // !UCONFIG_NO_COLLATION
+#endif  // __COLLATIONDATAREADER_H__