diff options
author | Andreas Rheinhardt <andreas.rheinhardt@outlook.com> | 2024-02-11 00:04:10 +0100 |
---|---|---|
committer | James Almer <jamrial@gmail.com> | 2024-03-07 08:53:31 -0300 |
commit | 326c97dd38c34508b7700265d93f98056bf60ac1 (patch) | |
tree | 9caac8eae42d6034483000044f41d3129b5040e0 /libavcodec | |
parent | 3e669b24e282594ab92ef50c839bb1fdc01331b4 (diff) | |
download | ffmpeg-326c97dd38c34508b7700265d93f98056bf60ac1.tar.gz |
avcodec/avcodec: Reorder AVCodecContext and AVSubtitleRect fields
Move related fields closer together and try to plug holes.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Diffstat (limited to 'libavcodec')
-rw-r--r-- | libavcodec/avcodec.h | 585 |
1 files changed, 292 insertions, 293 deletions
diff --git a/libavcodec/avcodec.h b/libavcodec/avcodec.h index f0332897b5..be6aff901e 100644 --- a/libavcodec/avcodec.h +++ b/libavcodec/avcodec.h @@ -495,29 +495,6 @@ typedef struct AVCodecContext { int64_t bit_rate; /** - * number of bits the bitstream is allowed to diverge from the reference. - * the reference can be CBR (for CBR pass1) or VBR (for pass2) - * - encoding: Set by user; unused for constant quantizer encoding. - * - decoding: unused - */ - int bit_rate_tolerance; - - /** - * Global quality for codecs which cannot change it per frame. - * This should be proportional to MPEG-1/2/4 qscale. - * - encoding: Set by user. - * - decoding: unused - */ - int global_quality; - - /** - * - encoding: Set by user. - * - decoding: unused - */ - int compression_level; -#define FF_COMPRESSION_DEFAULT -1 - - /** * AV_CODEC_FLAG_*. * - encoding: Set by user. * - decoding: Set by user. @@ -566,6 +543,22 @@ typedef struct AVCodecContext { */ AVRational time_base; + /** + * Timebase in which pkt_dts/pts and AVPacket.dts/pts are expressed. + * - encoding: unused. + * - decoding: set by user. + */ + AVRational pkt_timebase; + + /** + * - decoding: For codecs that store a framerate value in the compressed + * bitstream, the decoder may export it here. { 0, 1} when + * unknown. + * - encoding: May be used to signal the framerate of CFR content to an + * encoder. + */ + AVRational framerate; + #if FF_API_TICKS_PER_FRAME /** * For some codecs, the time base is closer to the field rate than the frame rate. @@ -640,11 +633,13 @@ typedef struct AVCodecContext { int coded_width, coded_height; /** - * the number of pictures in a group of pictures, or 0 for intra_only + * sample aspect ratio (0 if unknown) + * That is the width of a pixel divided by the height of the pixel. + * Numerator and denominator must be relatively prime and smaller than 256 for some video standards. * - encoding: Set by user. - * - decoding: unused + * - decoding: Set by libavcodec. */ - int gop_size; + AVRational sample_aspect_ratio; /** * Pixel format, see AV_PIX_FMT_xxx. @@ -662,6 +657,82 @@ typedef struct AVCodecContext { enum AVPixelFormat pix_fmt; /** + * Nominal unaccelerated pixel format, see AV_PIX_FMT_xxx. + * - encoding: unused. + * - decoding: Set by libavcodec before calling get_format() + */ + enum AVPixelFormat sw_pix_fmt; + + /** + * Chromaticity coordinates of the source primaries. + * - encoding: Set by user + * - decoding: Set by libavcodec + */ + enum AVColorPrimaries color_primaries; + + /** + * Color Transfer Characteristic. + * - encoding: Set by user + * - decoding: Set by libavcodec + */ + enum AVColorTransferCharacteristic color_trc; + + /** + * YUV colorspace type. + * - encoding: Set by user + * - decoding: Set by libavcodec + */ + enum AVColorSpace colorspace; + + /** + * MPEG vs JPEG YUV range. + * - encoding: Set by user to override the default output color range value, + * If not specified, libavcodec sets the color range depending on the + * output format. + * - decoding: Set by libavcodec, can be set by the user to propagate the + * color range to components reading from the decoder context. + */ + enum AVColorRange color_range; + + /** + * This defines the location of chroma samples. + * - encoding: Set by user + * - decoding: Set by libavcodec + */ + enum AVChromaLocation chroma_sample_location; + + /** Field order + * - encoding: set by libavcodec + * - decoding: Set by user. + */ + enum AVFieldOrder field_order; + + /** + * number of reference frames + * - encoding: Set by user. + * - decoding: Set by lavc. + */ + int refs; + + /** + * Size of the frame reordering buffer in the decoder. + * For MPEG-2 it is 1 IPB or 0 low delay IP. + * - encoding: Set by libavcodec. + * - decoding: Set by libavcodec. + */ + int has_b_frames; + + /** + * slice flags + * - encoding: unused + * - decoding: Set by user. + */ + int slice_flags; +#define SLICE_FLAG_CODED_ORDER 0x0001 ///< draw_horiz_band() is called in coded order instead of display +#define SLICE_FLAG_ALLOW_FIELD 0x0002 ///< allow draw_horiz_band() with field slices (MPEG-2 field pics) +#define SLICE_FLAG_ALLOW_PLANE 0x0004 ///< allow draw_horiz_band() with 1 component at a time (SVQ1) + + /** * If non NULL, 'draw_horiz_band' is called by the libavcodec * decoder to draw a horizontal band. It improves cache usage. Not * all codecs can do that. You must check the codec capabilities @@ -740,14 +811,6 @@ typedef struct AVCodecContext { float b_quant_offset; /** - * Size of the frame reordering buffer in the decoder. - * For MPEG-2 it is 1 IPB or 0 low delay IP. - * - encoding: Set by libavcodec. - * - decoding: Set by libavcodec. - */ - int has_b_frames; - - /** * qscale factor between P- and I-frames * If > 0 then the last P-frame quantizer will be used (q = lastp_q * factor + offset). * If < 0 then normal ratecontrol will be done (q= -normal_q*factor+offset). @@ -799,13 +862,11 @@ typedef struct AVCodecContext { float dark_masking; /** - * sample aspect ratio (0 if unknown) - * That is the width of a pixel divided by the height of the pixel. - * Numerator and denominator must be relatively prime and smaller than 256 for some video standards. + * noise vs. sse weight for the nsse comparison function * - encoding: Set by user. - * - decoding: Set by libavcodec. + * - decoding: unused */ - AVRational sample_aspect_ratio; + int nsse_weight; /** * motion estimation comparison function @@ -894,16 +955,6 @@ typedef struct AVCodecContext { int me_range; /** - * slice flags - * - encoding: unused - * - decoding: Set by user. - */ - int slice_flags; -#define SLICE_FLAG_CODED_ORDER 0x0001 ///< draw_horiz_band() is called in coded order instead of display -#define SLICE_FLAG_ALLOW_FIELD 0x0002 ///< allow draw_horiz_band() with field slices (MPEG-2 field pics) -#define SLICE_FLAG_ALLOW_PLANE 0x0004 ///< allow draw_horiz_band() with 1 component at a time (SVQ1) - - /** * macroblock decision mode * - encoding: Set by user. * - decoding: unused @@ -932,6 +983,13 @@ typedef struct AVCodecContext { uint16_t *inter_matrix; /** + * custom intra quantization matrix + * - encoding: Set by user, can be NULL. + * - decoding: unused. + */ + uint16_t *chroma_intra_matrix; + + /** * precision of the intra DC coefficient - 8 * - encoding: Set by user. * - decoding: Set by libavcodec @@ -939,20 +997,6 @@ typedef struct AVCodecContext { int intra_dc_precision; /** - * Number of macroblock rows at the top which are skipped. - * - encoding: unused - * - decoding: Set by user. - */ - int skip_top; - - /** - * Number of macroblock rows at the bottom which are skipped. - * - encoding: unused - * - decoding: Set by user. - */ - int skip_bottom; - - /** * minimum MB Lagrange multiplier * - encoding: Set by user. * - decoding: unused @@ -980,11 +1024,11 @@ typedef struct AVCodecContext { int keyint_min; /** - * number of reference frames + * the number of pictures in a group of pictures, or 0 for intra_only * - encoding: Set by user. - * - decoding: Set by lavc. + * - decoding: unused */ - int refs; + int gop_size; /** * Note: Value depends upon the compare function used for fullpel ME. @@ -994,44 +1038,6 @@ typedef struct AVCodecContext { int mv0_threshold; /** - * Chromaticity coordinates of the source primaries. - * - encoding: Set by user - * - decoding: Set by libavcodec - */ - enum AVColorPrimaries color_primaries; - - /** - * Color Transfer Characteristic. - * - encoding: Set by user - * - decoding: Set by libavcodec - */ - enum AVColorTransferCharacteristic color_trc; - - /** - * YUV colorspace type. - * - encoding: Set by user - * - decoding: Set by libavcodec - */ - enum AVColorSpace colorspace; - - /** - * MPEG vs JPEG YUV range. - * - encoding: Set by user to override the default output color range value, - * If not specified, libavcodec sets the color range depending on the - * output format. - * - decoding: Set by libavcodec, can be set by the user to propagate the - * color range to components reading from the decoder context. - */ - enum AVColorRange color_range; - - /** - * This defines the location of chroma samples. - * - encoding: Set by user - * - decoding: Set by libavcodec - */ - enum AVChromaLocation chroma_sample_location; - - /** * Number of slices. * Indicates number of picture subdivisions. Used for parallelized * decoding. @@ -1040,12 +1046,6 @@ typedef struct AVCodecContext { */ int slices; - /** Field order - * - encoding: set by libavcodec - * - decoding: Set by user. - */ - enum AVFieldOrder field_order; - /* audio only */ int sample_rate; ///< samples per second @@ -1056,6 +1056,14 @@ typedef struct AVCodecContext { */ enum AVSampleFormat sample_fmt; ///< sample format + /** + * Audio channel layout. + * - encoding: must be set by the caller, to one of AVCodec.ch_layouts. + * - decoding: may be set by the caller if known e.g. from the container. + * The decoder can then override during decoding as needed. + */ + AVChannelLayout ch_layout; + /* The following data should not be initialized. */ /** * Number of samples per channel in an audio frame. @@ -1097,6 +1105,41 @@ typedef struct AVCodecContext { enum AVSampleFormat request_sample_fmt; /** + * Audio only. The number of "priming" samples (padding) inserted by the + * encoder at the beginning of the audio. I.e. this number of leading + * decoded samples must be discarded by the caller to get the original audio + * without leading padding. + * + * - decoding: unused + * - encoding: Set by libavcodec. The timestamps on the output packets are + * adjusted by the encoder so that they always refer to the + * first sample of the data actually contained in the packet, + * including any added padding. E.g. if the timebase is + * 1/samplerate and the timestamp of the first input sample is + * 0, the timestamp of the first output packet will be + * -initial_padding. + */ + int initial_padding; + + /** + * Audio only. The amount of padding (in samples) appended by the encoder to + * the end of the audio. I.e. this number of decoded samples must be + * discarded by the caller from the end of the stream to get the original + * audio without any trailing padding. + * + * - decoding: unused + * - encoding: unused + */ + int trailing_padding; + + /** + * Number of samples to skip after a discontinuity + * - decoding: unused + * - encoding: set by libavcodec + */ + int seek_preroll; + + /** * This callback is called at the beginning of each frame to get data * buffer(s) for it. There may be one contiguous buffer for all the data or * there may be a buffer per each data plane or anything in between. What @@ -1179,6 +1222,29 @@ typedef struct AVCodecContext { int (*get_buffer2)(struct AVCodecContext *s, AVFrame *frame, int flags); /* - encoding parameters */ + /** + * number of bits the bitstream is allowed to diverge from the reference. + * the reference can be CBR (for CBR pass1) or VBR (for pass2) + * - encoding: Set by user; unused for constant quantizer encoding. + * - decoding: unused + */ + int bit_rate_tolerance; + + /** + * Global quality for codecs which cannot change it per frame. + * This should be proportional to MPEG-1/2/4 qscale. + * - encoding: Set by user. + * - decoding: unused + */ + int global_quality; + + /** + * - encoding: Set by user. + * - decoding: unused + */ + int compression_level; +#define FF_COMPRESSION_DEFAULT -1 + float qcompress; ///< amount of qscale change between easy & hard scenes (0.0-1.0) float qblur; ///< amount of qscale smoothing over time (0.0-1.0) @@ -1385,6 +1451,75 @@ typedef struct AVCodecContext { void *hwaccel_context; /** + * A reference to the AVHWFramesContext describing the input (for encoding) + * or output (decoding) frames. The reference is set by the caller and + * afterwards owned (and freed) by libavcodec - it should never be read by + * the caller after being set. + * + * - decoding: This field should be set by the caller from the get_format() + * callback. The previous reference (if any) will always be + * unreffed by libavcodec before the get_format() call. + * + * If the default get_buffer2() is used with a hwaccel pixel + * format, then this AVHWFramesContext will be used for + * allocating the frame buffers. + * + * - encoding: For hardware encoders configured to use a hwaccel pixel + * format, this field should be set by the caller to a reference + * to the AVHWFramesContext describing input frames. + * AVHWFramesContext.format must be equal to + * AVCodecContext.pix_fmt. + * + * This field should be set before avcodec_open2() is called. + */ + AVBufferRef *hw_frames_ctx; + + /** + * A reference to the AVHWDeviceContext describing the device which will + * be used by a hardware encoder/decoder. The reference is set by the + * caller and afterwards owned (and freed) by libavcodec. + * + * This should be used if either the codec device does not require + * hardware frames or any that are used are to be allocated internally by + * libavcodec. If the user wishes to supply any of the frames used as + * encoder input or decoder output then hw_frames_ctx should be used + * instead. When hw_frames_ctx is set in get_format() for a decoder, this + * field will be ignored while decoding the associated stream segment, but + * may again be used on a following one after another get_format() call. + * + * For both encoders and decoders this field should be set before + * avcodec_open2() is called and must not be written to thereafter. + * + * Note that some decoders may require this field to be set initially in + * order to support hw_frames_ctx at all - in that case, all frames + * contexts used must be created on the same device. + */ + AVBufferRef *hw_device_ctx; + + /** + * Bit set of AV_HWACCEL_FLAG_* flags, which affect hardware accelerated + * decoding (if active). + * - encoding: unused + * - decoding: Set by user (either before avcodec_open2(), or in the + * AVCodecContext.get_format callback) + */ + int hwaccel_flags; + + /* + * Video decoding only. Sets the number of extra hardware frames which + * the decoder will allocate for use by the caller. This must be set + * before avcodec_open2() is called. + * + * Some hardware decoders require all frames that they will use for + * output to be defined in advance before decoding starts. For such + * decoders, the hardware frame pool must therefore be of a fixed size. + * The extra frames set here are on top of any number that the decoder + * needs internally in order to operate normally (for example, frames + * used as reference pictures). + */ + int extra_hw_frames; + + /** * error * - encoding: Set by libavcodec if flags & AV_CODEC_FLAG_PSNR. * - decoding: unused @@ -1439,13 +1574,6 @@ typedef struct AVCodecContext { int bits_per_raw_sample; /** - * low resolution decoding, 1-> 1/2 size, 2->1/4 size - * - encoding: unused - * - decoding: Set by user. - */ - int lowres; - - /** * thread count * is used to decide how many independent tasks should be passed to execute() * - encoding: Set by user. @@ -1503,13 +1631,6 @@ typedef struct AVCodecContext { int (*execute2)(struct AVCodecContext *c, int (*func)(struct AVCodecContext *c2, void *arg, int jobnr, int threadnr), void *arg2, int *ret, int count); /** - * noise vs. sse weight for the nsse comparison function - * - encoding: Set by user. - * - decoding: unused - */ - int nsse_weight; - - /** * profile * - encoding: Set by user. * - decoding: Set by libavcodec. @@ -1667,6 +1788,16 @@ typedef struct AVCodecContext { #endif /** + * Properties of the stream that gets decoded + * - encoding: unused + * - decoding: set by libavcodec + */ + unsigned properties; +#define FF_CODEC_PROPERTY_LOSSLESS 0x00000001 +#define FF_CODEC_PROPERTY_CLOSED_CAPTIONS 0x00000002 +#define FF_CODEC_PROPERTY_FILM_GRAIN 0x00000004 + + /** * Skip loop filtering for selected frames. * - encoding: unused * - decoding: Set by user. @@ -1688,55 +1819,39 @@ typedef struct AVCodecContext { enum AVDiscard skip_frame; /** - * Header containing style information for text subtitles. - * For SUBTITLE_ASS subtitle type, it should contain the whole ASS - * [Script Info] and [V4+ Styles] section, plus the [Events] line and - * the Format line following. It shouldn't include any Dialogue line. - * - encoding: Set/allocated/freed by user (before avcodec_open2()) - * - decoding: Set/allocated/freed by libavcodec (by avcodec_open2()) - */ - uint8_t *subtitle_header; - int subtitle_header_size; - - /** - * Audio only. The number of "priming" samples (padding) inserted by the - * encoder at the beginning of the audio. I.e. this number of leading - * decoded samples must be discarded by the caller to get the original audio - * without leading padding. + * Skip processing alpha if supported by codec. + * Note that if the format uses pre-multiplied alpha (common with VP6, + * and recommended due to better video quality/compression) + * the image will look as if alpha-blended onto a black background. + * However for formats that do not use pre-multiplied alpha + * there might be serious artefacts (though e.g. libswscale currently + * assumes pre-multiplied alpha anyway). * - * - decoding: unused - * - encoding: Set by libavcodec. The timestamps on the output packets are - * adjusted by the encoder so that they always refer to the - * first sample of the data actually contained in the packet, - * including any added padding. E.g. if the timebase is - * 1/samplerate and the timestamp of the first input sample is - * 0, the timestamp of the first output packet will be - * -initial_padding. + * - decoding: set by user + * - encoding: unused */ - int initial_padding; + int skip_alpha; /** - * - decoding: For codecs that store a framerate value in the compressed - * bitstream, the decoder may export it here. { 0, 1} when - * unknown. - * - encoding: May be used to signal the framerate of CFR content to an - * encoder. + * Number of macroblock rows at the top which are skipped. + * - encoding: unused + * - decoding: Set by user. */ - AVRational framerate; + int skip_top; /** - * Nominal unaccelerated pixel format, see AV_PIX_FMT_xxx. - * - encoding: unused. - * - decoding: Set by libavcodec before calling get_format() + * Number of macroblock rows at the bottom which are skipped. + * - encoding: unused + * - decoding: Set by user. */ - enum AVPixelFormat sw_pix_fmt; + int skip_bottom; /** - * Timebase in which pkt_dts/pts and AVPacket.dts/pts are expressed. - * - encoding: unused. - * - decoding: set by user. + * low resolution decoding, 1-> 1/2 size, 2->1/4 size + * - encoding: unused + * - decoding: Set by user. */ - AVRational pkt_timebase; + int lowres; /** * AVCodecDescriptor @@ -1775,32 +1890,15 @@ typedef struct AVCodecContext { #define FF_SUB_CHARENC_MODE_IGNORE 2 ///< neither convert the subtitles, nor check them for valid UTF-8 /** - * Skip processing alpha if supported by codec. - * Note that if the format uses pre-multiplied alpha (common with VP6, - * and recommended due to better video quality/compression) - * the image will look as if alpha-blended onto a black background. - * However for formats that do not use pre-multiplied alpha - * there might be serious artefacts (though e.g. libswscale currently - * assumes pre-multiplied alpha anyway). - * - * - decoding: set by user - * - encoding: unused - */ - int skip_alpha; - - /** - * Number of samples to skip after a discontinuity - * - decoding: unused - * - encoding: set by libavcodec - */ - int seek_preroll; - - /** - * custom intra quantization matrix - * - encoding: Set by user, can be NULL. - * - decoding: unused. + * Header containing style information for text subtitles. + * For SUBTITLE_ASS subtitle type, it should contain the whole ASS + * [Script Info] and [V4+ Styles] section, plus the [Events] line and + * the Format line following. It shouldn't include any Dialogue line. + * - encoding: Set/allocated/freed by user (before avcodec_open2()) + * - decoding: Set/allocated/freed by libavcodec (by avcodec_open2()) */ - uint16_t *chroma_intra_matrix; + int subtitle_header_size; + uint8_t *subtitle_header; /** * dump format separator. @@ -1819,16 +1917,6 @@ typedef struct AVCodecContext { char *codec_whitelist; /** - * Properties of the stream that gets decoded - * - encoding: unused - * - decoding: set by libavcodec - */ - unsigned properties; -#define FF_CODEC_PROPERTY_LOSSLESS 0x00000001 -#define FF_CODEC_PROPERTY_CLOSED_CAPTIONS 0x00000002 -#define FF_CODEC_PROPERTY_FILM_GRAIN 0x00000004 - - /** * Additional data associated with the entire coded stream. * * - decoding: may be set by user before calling avcodec_open2(). @@ -1838,39 +1926,14 @@ typedef struct AVCodecContext { int nb_coded_side_data; /** - * A reference to the AVHWFramesContext describing the input (for encoding) - * or output (decoding) frames. The reference is set by the caller and - * afterwards owned (and freed) by libavcodec - it should never be read by - * the caller after being set. - * - * - decoding: This field should be set by the caller from the get_format() - * callback. The previous reference (if any) will always be - * unreffed by libavcodec before the get_format() call. - * - * If the default get_buffer2() is used with a hwaccel pixel - * format, then this AVHWFramesContext will be used for - * allocating the frame buffers. - * - * - encoding: For hardware encoders configured to use a hwaccel pixel - * format, this field should be set by the caller to a reference - * to the AVHWFramesContext describing input frames. - * AVHWFramesContext.format must be equal to - * AVCodecContext.pix_fmt. - * - * This field should be set before avcodec_open2() is called. - */ - AVBufferRef *hw_frames_ctx; - - /** - * Audio only. The amount of padding (in samples) appended by the encoder to - * the end of the audio. I.e. this number of decoded samples must be - * discarded by the caller from the end of the stream to get the original - * audio without any trailing padding. + * Bit set of AV_CODEC_EXPORT_DATA_* flags, which affects the kind of + * metadata exported in frame, packet, or coded stream side data by + * decoders and encoders. * - * - decoding: unused - * - encoding: unused + * - decoding: set by user + * - encoding: set by user */ - int trailing_padding; + int export_side_data; /** * The number of pixels per image to maximally accept. @@ -1881,37 +1944,6 @@ typedef struct AVCodecContext { int64_t max_pixels; /** - * A reference to the AVHWDeviceContext describing the device which will - * be used by a hardware encoder/decoder. The reference is set by the - * caller and afterwards owned (and freed) by libavcodec. - * - * This should be used if either the codec device does not require - * hardware frames or any that are used are to be allocated internally by - * libavcodec. If the user wishes to supply any of the frames used as - * encoder input or decoder output then hw_frames_ctx should be used - * instead. When hw_frames_ctx is set in get_format() for a decoder, this - * field will be ignored while decoding the associated stream segment, but - * may again be used on a following one after another get_format() call. - * - * For both encoders and decoders this field should be set before - * avcodec_open2() is called and must not be written to thereafter. - * - * Note that some decoders may require this field to be set initially in - * order to support hw_frames_ctx at all - in that case, all frames - * contexts used must be created on the same device. - */ - AVBufferRef *hw_device_ctx; - - /** - * Bit set of AV_HWACCEL_FLAG_* flags, which affect hardware accelerated - * decoding (if active). - * - encoding: unused - * - decoding: Set by user (either before avcodec_open2(), or in the - * AVCodecContext.get_format callback) - */ - int hwaccel_flags; - - /** * Video decoding only. Certain video codecs support cropping, meaning that * only a sub-rectangle of the decoded frame is intended for display. This * option controls how cropping is handled by libavcodec. @@ -1938,20 +1970,6 @@ typedef struct AVCodecContext { */ int apply_cropping; - /* - * Video decoding only. Sets the number of extra hardware frames which - * the decoder will allocate for use by the caller. This must be set - * before avcodec_open2() is called. - * - * Some hardware decoders require all frames that they will use for - * output to be defined in advance before decoding starts. For such - * decoders, the hardware frame pool must therefore be of a fixed size. - * The extra frames set here are on top of any number that the decoder - * needs internally in order to operate normally (for example, frames - * used as reference pictures). - */ - int extra_hw_frames; - /** * The percentage of damaged samples to discard a frame. * @@ -1969,16 +1987,6 @@ typedef struct AVCodecContext { int64_t max_samples; /** - * Bit set of AV_CODEC_EXPORT_DATA_* flags, which affects the kind of - * metadata exported in frame, packet, or coded stream side data by - * decoders and encoders. - * - * - decoding: set by user - * - encoding: set by user - */ - int export_side_data; - - /** * This callback is called at the beginning of each packet to get a data * buffer for it. * @@ -2021,14 +2029,6 @@ typedef struct AVCodecContext { int (*get_encode_buffer)(struct AVCodecContext *s, AVPacket *pkt, int flags); /** - * Audio channel layout. - * - encoding: must be set by the caller, to one of AVCodec.ch_layouts. - * - decoding: may be set by the caller if known e.g. from the container. - * The decoder can then override during decoding as needed. - */ - AVChannelLayout ch_layout; - - /** * Frame counter, set by libavcodec. * * - decoding: total number of frames returned from the decoder so far. @@ -2174,6 +2174,7 @@ typedef struct AVSubtitleRect { uint8_t *data[4]; int linesize[4]; + int flags; enum AVSubtitleType type; char *text; ///< 0 terminated plain UTF-8 text @@ -2184,8 +2185,6 @@ typedef struct AVSubtitleRect { * struct. */ char *ass; - - int flags; } AVSubtitleRect; typedef struct AVSubtitle { |