diff options
| author | Fabrice Bellard <fabrice@bellard.org> | 2002-11-19 19:47:50 +0000 |
|---|---|---|
| committer | Fabrice Bellard <fabrice@bellard.org> | 2002-11-19 19:47:50 +0000 |
| commit | c70a211997bcb3c582f25e9648a09995484dd63d (patch) | |
| tree | 3088bdcc12d98fa5884c2b04205a659d7b77996e /doc | |
| parent | 47d944d2be6ab5a70f69f619ef10179ed3fd32b1 (diff) | |
| download | ffmpeg-c70a211997bcb3c582f25e9648a09995484dd63d.tar.gz | |
ffserver documentation update
Originally committed as revision 1234 to svn://svn.ffmpeg.org/ffmpeg/trunk
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/Makefile | 2 | ||||
| -rw-r--r-- | doc/ffserver-doc.html | 306 | ||||
| -rw-r--r-- | doc/ffserver-doc.texi (renamed from doc/HOWTO-STREAM) | 70 | ||||
| -rw-r--r-- | doc/ffserver.txt | 79 |
4 files changed, 352 insertions, 105 deletions
diff --git a/doc/Makefile b/doc/Makefile index d951c33e13..dd5bca1f1d 100644 --- a/doc/Makefile +++ b/doc/Makefile @@ -1,4 +1,4 @@ -all: ffmpeg-doc.html faq.html +all: ffmpeg-doc.html faq.html ffserver-doc.html %.html: %.texi texi2html -monolithic -number $< diff --git a/doc/ffserver-doc.html b/doc/ffserver-doc.html new file mode 100644 index 0000000000..8e5c9f7d95 --- /dev/null +++ b/doc/ffserver-doc.html @@ -0,0 +1,306 @@ +<HTML> +<HEAD> +<!-- Created by texi2html 1.56k from ffserver-doc.texi on 19 November 2002 --> + +<TITLE>FFserver Documentation</TITLE> +</HEAD> +<BODY> +<H1>FFserver Documentation</H1> +<P> +<P><HR><P> +<H1>Table of Contents</H1> +<UL> +<LI><A NAME="TOC1" HREF="ffserver-doc.html#SEC1">1. Introduction</A> +<LI><A NAME="TOC2" HREF="ffserver-doc.html#SEC2">2. QuickStart</A> +<UL> +<LI><A NAME="TOC3" HREF="ffserver-doc.html#SEC3">2.1 What can this do?</A> +<LI><A NAME="TOC4" HREF="ffserver-doc.html#SEC4">2.2 What do I need?</A> +<LI><A NAME="TOC5" HREF="ffserver-doc.html#SEC5">2.3 How do I make it work?</A> +<LI><A NAME="TOC6" HREF="ffserver-doc.html#SEC6">2.4 What happens next?</A> +<LI><A NAME="TOC7" HREF="ffserver-doc.html#SEC7">2.5 Troubleshooting</A> +<UL> +<LI><A NAME="TOC8" HREF="ffserver-doc.html#SEC8">2.5.1 I don't hear any audio, but video is fine</A> +<LI><A NAME="TOC9" HREF="ffserver-doc.html#SEC9">2.5.2 The audio and video loose sync after a while.</A> +<LI><A NAME="TOC10" HREF="ffserver-doc.html#SEC10">2.5.3 After a long while, the video update rate goes way down in WMP.</A> +<LI><A NAME="TOC11" HREF="ffserver-doc.html#SEC11">2.5.4 WMP 6.4 behaves differently to WMP 7.</A> +</UL> +<LI><A NAME="TOC12" HREF="ffserver-doc.html#SEC12">2.6 What else can it do?</A> +<LI><A NAME="TOC13" HREF="ffserver-doc.html#SEC13">2.7 Tips</A> +<LI><A NAME="TOC14" HREF="ffserver-doc.html#SEC14">2.8 Why does the ?buffer / Preroll stop working after a time?</A> +<LI><A NAME="TOC15" HREF="ffserver-doc.html#SEC15">2.9 Does the <CODE>?date=</CODE> stuff work.</A> +</UL> +</UL> +<P><HR><P> + +<P> +FFserver Documentation + + + + +<H1><A NAME="SEC1" HREF="ffserver-doc.html#TOC1">1. Introduction</A></H1> + +<P> +FFserver is a streaming server for both audio and video. It supports +several live feeds, streaming from files and time shifting on live feeds +(you can seek to positions in the past on each live feed, provided you +specify a big enough feed storage in ffserver.conf). + + +<P> +This documentation covers only the streaming aspects of ffserver / +ffmpeg. All questions about parameters for ffmpeg, codec questions, +etc. are not covered here. Read <TT>`ffmpeg-doc.[texi|html]'</TT> for more +information. + + + + +<H1><A NAME="SEC2" HREF="ffserver-doc.html#TOC2">2. QuickStart</A></H1> + +<P> +[Contributed by Philip Gladstone, philip-ffserver at gladstonefamily dot net] + + + + +<H2><A NAME="SEC3" HREF="ffserver-doc.html#TOC3">2.1 What can this do?</A></H2> + +<P> +When properly configured and running, you can capture video and audio in real +time from a suitable capture card, and stream it out over the Internet to +either Windows Media Player or RealAudio player (with some restrictions). + + +<P> +It can also stream from files, though that is currently broken. Very often, a +web server can be used to serve up the files just as well. + + + + +<H2><A NAME="SEC4" HREF="ffserver-doc.html#TOC4">2.2 What do I need?</A></H2> + +<P> +I use Linux on a 900MHz Duron with a cheapo Bt848 based TV capture card. I'm +using stock linux 2.4.17 with the stock drivers. [Actually that isn't true, +I needed some special drivers from my motherboard based sound card.] + + +<P> +I understand that FreeBSD systems work just fine as well. + + + + +<H2><A NAME="SEC5" HREF="ffserver-doc.html#TOC5">2.3 How do I make it work?</A></H2> + +<P> +First, build the kit. It *really* helps to have installed LAME first. Then when +you run the ffserver ./configure, make sure that you have the --enable-mp3lame +flag turned on. + + +<P> +LAME is important as it allows streaming of audio to Windows Media Player. Don't +ask why the other audio types do not work. + + +<P> +As a simple test, just run the following two command lines: + + + +<PRE> +./ffserver -f doc/ffserver.conf & +./ffmpeg http://localhost:8090/feed1.ffm +</PRE> + +<P> +At this point you should be able to go to your windows machine and fire up +Windows Media Player (WMP). Go to Open URL and enter + + + +<PRE> + http://<linuxbox>:8090/test.asf +</PRE> + +<P> +You should see (after a short delay) video and hear audio. + + +<P> +WARNING: trying to stream test1.mpg doesn't work with WMP as it tries to +transfer the entire file before starting to play. + + + + +<H2><A NAME="SEC6" HREF="ffserver-doc.html#TOC6">2.4 What happens next?</A></H2> + +<P> +You should edit the ffserver.conf file to suit your needs (in terms of +frame rates etc). Then install ffserver and ffmpeg, write a script to start +them up, and off you go. + + + + +<H2><A NAME="SEC7" HREF="ffserver-doc.html#TOC7">2.5 Troubleshooting</A></H2> + + + +<H3><A NAME="SEC8" HREF="ffserver-doc.html#TOC8">2.5.1 I don't hear any audio, but video is fine</A></H3> + +<P> +Maybe you didn't install LAME, or get your ./configure statement right. Check +the ffmpeg output to see if a line referring to mp3 is present. If not, then +your configuration was incorrect. If it is, then maybe your wiring is not +setup correctly. Maybe the sound card is not getting data from the right +input source. Maybe you have a really awful audio interface (like I do) +that only captures in stereo and also requires that one channel be flipped. +If you are one of these people, then export 'AUDIO_FLIP_LEFT=1' before +starting ffmpeg. + + + + +<H3><A NAME="SEC9" HREF="ffserver-doc.html#TOC9">2.5.2 The audio and video loose sync after a while.</A></H3> + +<P> +Yes, they do. + + + + +<H3><A NAME="SEC10" HREF="ffserver-doc.html#TOC10">2.5.3 After a long while, the video update rate goes way down in WMP.</A></H3> + +<P> +Yes, it does. Who knows why? + + + + +<H3><A NAME="SEC11" HREF="ffserver-doc.html#TOC11">2.5.4 WMP 6.4 behaves differently to WMP 7.</A></H3> + +<P> +Yes, it does. Any thoughts on this would be gratefully received. These +differences extend to embedding WMP into a web page. [There are two +different object ids that you can use, one of them -- the old one -- cannot +play very well, and the new one works well (both on the same system). However, +I suspect that the new one is not available unless you have installed WMP 7]. + + + + +<H2><A NAME="SEC12" HREF="ffserver-doc.html#TOC12">2.6 What else can it do?</A></H2> + +<P> +There seems to be a bunch of code that allows you to replay previous +video. I've never tried it, so it probably doesn't work properly. YMMV. +In fact, in order to get some level of stability, ffserver now deletes +all the previously sent video whenever it restarts. + + +<P> +You can fiddle with many of the codec choices and encoding parameters, and +there are a bunch more parameters that you cannot control. Post a message +to the mailing list if there are some 'must have' parameters. Look in the +ffserver.conf for a list of the currently available controls. + + +<P> +It will automatically generate the .ASX or .RAM files that are often used +in browsers. These files are actually redirections to the underlying .ASF +or .RM file. The reason for this is that the browser often fetches the +entire file before starting up the external viewer. The redirection files +are very small and can be transferred quickly. [The stream itself is +often 'infinite' and thus the browser tries to download it and never +finishes.] + + + + +<H2><A NAME="SEC13" HREF="ffserver-doc.html#TOC13">2.7 Tips</A></H2> + +<P> +* When you connect to a live stream, most players (WMP, RA etc) want to +buffer a certain number of seconds of material so that they can display the +signal continuously. However, ffserver (by default) starts sending data +in real time. This means that there is a pause of a few seconds while the +buffering is being done by the player. The good news is that this can be +cured by adding a '?buffer=5' to the end of the URL. This says that the +stream should start 5 seconds in the past -- and so the first 5 seconds +of the stream is sent as fast as the network will allow. It will then +slow down to real time. This noticeably improves the startup experience. + + +<P> +You can also add a 'Preroll 15' statement into the ffserver.conf that will +add the 15 second prebuffering on all requests that do not otherwise +specify a time. In addition, ffserver will skip frames until a key_frame +is found. This further reduces the startup delay by not transferring data +that will be discarded. + + +<P> +* You may want to adjust the MaxBandwidth in the ffserver.conf to limit +the amount of bandwidth consumed by live streams. + + + + +<H2><A NAME="SEC14" HREF="ffserver-doc.html#TOC14">2.8 Why does the ?buffer / Preroll stop working after a time?</A></H2> + +<P> +It turns out that (on my machine at least) the number of frames successfully +grabbed is marginally less than the number that ought to be grabbed. This +means that the timestamp in the encoded data stream gets behind real time. +This means that if you say 'preroll 10', then when the stream gets 10 +or more seconds behind, there is no preroll left. + + +<P> +Fixing this requires a require in the internals in how timestampts are +handled. + + + + +<H2><A NAME="SEC15" HREF="ffserver-doc.html#TOC15">2.9 Does the <CODE>?date=</CODE> stuff work.</A></H2> + +<P> +Yes (subject to the caution above). Also note that whenever you start +ffserver, it deletes the ffm file, thus wiping out what you had recorded +before. This behaviour is a temporary fix to various crashes. The aim is +to fix it so that the old data is saved if possible. + + +<P> +The format of the <CODE>?date=xxxxxx</CODE> is fairly flexible. You should use one +of the following formats (the 'T' is literal): + + + +<PRE> +* YYYY-MM-DDTHH:MM:SS (localtime) +* YYYY-MM-DDTHH:MM:SSZ (UTC) +</PRE> + +<P> +You can omit the YYYY-MM-DD, and then it refers to the current day. However +note that <SAMP>`?date=16:00:00'</SAMP> refers to 4PM on the current day -- this may be +in the future and so unlikely to useful. + + +<P> +You use this by adding the ?date= to the end of the URL for the stream. +For example: <SAMP>`http://localhost:8080/test.asf?date=2002-07-26T23:05:00'</SAMP>. + + +<P><HR><P> +This document was generated on 19 November 2002 using +<A HREF="http://wwwinfo.cern.ch/dis/texi2html/">texi2html</A> 1.56k. +</BODY> +</HTML> diff --git a/doc/HOWTO-STREAM b/doc/ffserver-doc.texi index d260a046b0..051038ed87 100644 --- a/doc/HOWTO-STREAM +++ b/doc/ffserver-doc.texi @@ -1,18 +1,30 @@ -The FFserver streaming HOWTO ----------------------------- +\input texinfo @c -*- texinfo -*- -Philip Gladstone <philip-ffserver@gladstonefamily.net> -Last updated: July 26, 2002 +@settitle FFserver Documentation +@titlepage +@sp 7 +@center @titlefont{FFserver Documentation} +@sp 3 +@end titlepage -0. What is this HOWTO about? -This covers only the streaming aspects of ffserver / ffmpeg. All questions about -parameters for ffmpeg, codec questions, etc. are not covered here. +@chapter Introduction -You should also read the ffserver.txt file in this directory. It contains -roughly the same information. +FFserver is a streaming server for both audio and video. It supports +several live feeds, streaming from files and time shifting on live feeds +(you can seek to positions in the past on each live feed, provided you +specify a big enough feed storage in ffserver.conf). -1. What can this do? +This documentation covers only the streaming aspects of ffserver / +ffmpeg. All questions about parameters for ffmpeg, codec questions, +etc. are not covered here. Read @file{ffmpeg-doc.[texi|html]} for more +information. + +@chapter QuickStart + +[Contributed by Philip Gladstone, philip-ffserver at gladstonefamily dot net] + +@section What can this do? When properly configured and running, you can capture video and audio in real time from a suitable capture card, and stream it out over the Internet to @@ -21,7 +33,7 @@ either Windows Media Player or RealAudio player (with some restrictions). It can also stream from files, though that is currently broken. Very often, a web server can be used to serve up the files just as well. -2. What do I need? +@section What do I need? I use Linux on a 900MHz Duron with a cheapo Bt848 based TV capture card. I'm using stock linux 2.4.17 with the stock drivers. [Actually that isn't true, @@ -29,7 +41,7 @@ I needed some special drivers from my motherboard based sound card.] I understand that FreeBSD systems work just fine as well. -3. How do I make it work? +@section How do I make it work? First, build the kit. It *really* helps to have installed LAME first. Then when you run the ffserver ./configure, make sure that you have the --enable-mp3lame @@ -40,28 +52,32 @@ ask why the other audio types do not work. As a simple test, just run the following two command lines: +@example ./ffserver -f doc/ffserver.conf & ./ffmpeg http://localhost:8090/feed1.ffm +@end example At this point you should be able to go to your windows machine and fire up Windows Media Player (WMP). Go to Open URL and enter +@example http://<linuxbox>:8090/test.asf +@end example You should see (after a short delay) video and hear audio. WARNING: trying to stream test1.mpg doesn't work with WMP as it tries to transfer the entire file before starting to play. -4. What happens next? +@section What happens next? You should edit the ffserver.conf file to suit your needs (in terms of frame rates etc). Then install ffserver and ffmpeg, write a script to start them up, and off you go. -5. Troubleshooting +@section Troubleshooting -* I don't hear any audio, but video is fine +@subsection I don't hear any audio, but video is fine Maybe you didn't install LAME, or get your ./configure statement right. Check the ffmpeg output to see if a line referring to mp3 is present. If not, then @@ -72,15 +88,15 @@ that only captures in stereo and also requires that one channel be flipped. If you are one of these people, then export 'AUDIO_FLIP_LEFT=1' before starting ffmpeg. -* The audio and video loose sync after a while. +@subsection The audio and video loose sync after a while. Yes, they do. -* After a long while, the video update rate goes way down in WMP. +@subsection After a long while, the video update rate goes way down in WMP. Yes, it does. Who knows why? -* WMP 6.4 behaves differently to WMP 7. +@subsection WMP 6.4 behaves differently to WMP 7. Yes, it does. Any thoughts on this would be gratefully received. These differences extend to embedding WMP into a web page. [There are two @@ -88,7 +104,7 @@ different object ids that you can use, one of them -- the old one -- cannot play very well, and the new one works well (both on the same system). However, I suspect that the new one is not available unless you have installed WMP 7]. -6. What else can it do? +@section What else can it do? There seems to be a bunch of code that allows you to replay previous video. I've never tried it, so it probably doesn't work properly. YMMV. @@ -108,7 +124,7 @@ are very small and can be transferred quickly. [The stream itself is often 'infinite' and thus the browser tries to download it and never finishes.] -7. Tips +@section Tips * When you connect to a live stream, most players (WMP, RA etc) want to buffer a certain number of seconds of material so that they can display the @@ -129,7 +145,7 @@ that will be discarded. * You may want to adjust the MaxBandwidth in the ffserver.conf to limit the amount of bandwidth consumed by live streams. -8. Why does the ?buffer / Preroll stop working after a time? +@section Why does the ?buffer / Preroll stop working after a time? It turns out that (on my machine at least) the number of frames successfully grabbed is marginally less than the number that ought to be grabbed. This @@ -140,22 +156,26 @@ or more seconds behind, there is no preroll left. Fixing this requires a require in the internals in how timestampts are handled. -9. Does the ?date= stuff work. +@section Does the @code{?date=} stuff work. Yes (subject to the caution above). Also note that whenever you start ffserver, it deletes the ffm file, thus wiping out what you had recorded before. This behaviour is a temporary fix to various crashes. The aim is to fix it so that the old data is saved if possible. -The format of the ?date=xxxxxx is fairly flexible. You should use one +The format of the @code{?date=xxxxxx} is fairly flexible. You should use one of the following formats (the 'T' is literal): +@example * YYYY-MM-DDTHH:MM:SS (localtime) * YYYY-MM-DDTHH:MM:SSZ (UTC) +@end example You can omit the YYYY-MM-DD, and then it refers to the current day. However -note that ?date=16:00:00 refers to 4PM on the current day -- this may be +note that @samp{?date=16:00:00} refers to 4PM on the current day -- this may be in the future and so unlikely to useful. You use this by adding the ?date= to the end of the URL for the stream. -For example: http://localhost:8080/test.asf?date=2002-07-26T23:05:00 +For example: @samp{http://localhost:8080/test.asf?date=2002-07-26T23:05:00}. + +@bye diff --git a/doc/ffserver.txt b/doc/ffserver.txt deleted file mode 100644 index 6b1228870c..0000000000 --- a/doc/ffserver.txt +++ /dev/null @@ -1,79 +0,0 @@ -*************** FFserver live broadcast server ***************** - -0) Introduction - -ffserver is a streaming server for both audio and video. It supports -several live feeds, streaming from files and time shifting on live -feeds (you can seek to positions in the past on each live feed, -provided you specify a big enough feed storage in ffserver.conf). - -1) Quick help - -- First you must ensure that your grab system is OK. Verify with - 'xawtv' that your TV card is tuned on a correct video source. - -- Try with ffmpeg that you can record correctly. For example: - - ffmpeg /tmp/a.mpg - -will record a ten seconds mpeg file from your TV card and audio -card. Use for example the mpegtv player or MPlayer to view the created -MPEG file. - -- Launch ffserver on your PC with the sample config file: - - ffserver -f doc/ffserver.conf - -- Verify with your browser that ffserver is working correctly. For - that purpose, explore: http://localhost:8090/stat.html . - -- Now launch ffmpeg to do real time encoding : - - ffmpeg http://localhost:8090/feed1.ffm - -- Then, use your favorite players to see each generated stream: - - mtvp http://localhost:8090/test1.mpg - - mpg123 http://localhost:8090/test.mp2 - - netscape http://localhost:8090/test.swf - - realplayer http://localhost:8090/test.rm - - etc... - - Note that ffserver generates multiple streams in multiple formats AT - THE SAME TIME. It should be able to handle hundreds of users at the - same time if you internet connection is fast enough. - -- Now you can configure ffserver for your real needs. Edit the - ffserver.conf file to use only the formats you want. Read the ffmpeg - documentation (ffmpeg.txt) to learn more about the codec and format - stuff. - -- Report any bug you find (and the fix if you have it!). - -2) URL Format - - ffserver supports that you seek in some formats. The syntax is to - add a '?' option to the URL. Only the 'date' option is supported. - - The date format is [YYYY-MM-DDT][[HH:]MM:]SS[.m...] (clost to ISO - date format). For live streams, the date is absolute and give in - GMT. If the day is not specified, the current day is used. - - example: - - mpg123 http://localhost:8090/test.mp2?date=10:00 - - play the stream starting at 10:00 AM GMT today. - - mpg123 http://localhost:8090/test.mp2?date=2001-06-23T23:00 - - is also a valid date. - - For file streams, the date is relative to the start of the file. No - day can be specified. - - |