doc: move ffmpeg-formats.texi content to separated file

This should simplify inclusion in monolithic tool manuals.

2 files changed, 147 insertions, 146 deletions

diff --git a/doc/ffmpeg-formats.texi b/doc/ffmpeg-formats.texi
index 1dce6e7584..e205caabeb 100644
--- a/doc/ffmpeg-formats.texi
+++ b/doc/ffmpeg-formats.texi
@@ -17,152 +17,7 @@ provided by the libavformat library.
 
 @c man end DESCRIPTION
 
-@chapter Format Options
-@c man begin FORMAT OPTIONS
-
-The libavformat library provides some generic global options, which
-can be set on all the muxers and demuxers. In addition each muxer or
-demuxer may support so-called private options, which are specific for
-that component.
-
-Options may be set by specifying -@var{option} @var{value} in the
-FFmpeg tools, or by setting the value explicitly in the
-@code{AVFormatContext} options or using the @file{libavutil/opt.h} API
-for programmatic use.
-
-The list of supported options follows:
-
-@table @option
-@item avioflags @var{flags} (@emph{input/output})
-Possible values:
-@table @samp
-@item direct
-Reduce buffering.
-@end table
-
-@item probesize @var{integer} (@emph{input})
-Set probing size in bytes, i.e. the size of the data to analyze to get
-stream information. A higher value will allow to detect more
-information in case it is dispersed into the stream, but will increase
-latency. Must be an integer not lesser than 32. It is 5000000 by default.
-
-@item packetsize @var{integer} (@emph{output})
-Set packet size.
-
-@item fflags @var{flags} (@emph{input/output})
-Set format flags.
-
-Possible values:
-@table @samp
-@item ignidx
-Ignore index.
-@item genpts
-Generate PTS.
-@item nofillin
-Do not fill in missing values that can be exactly calculated.
-@item noparse
-Disable AVParsers, this needs @code{+nofillin} too.
-@item igndts
-Ignore DTS.
-@item discardcorrupt
-Discard corrupted frames.
-@item sortdts
-Try to interleave output packets by DTS.
-@item keepside
-Do not merge side data.
-@item latm
-Enable RTP MP4A-LATM payload.
-@item nobuffer
-Reduce the latency introduced by optional buffering
-@end table
-
-@item analyzeduration @var{integer} (@emph{input})
-Specify how many microseconds are analyzed to probe the input. A
-higher value will allow to detect more accurate information, but will
-increase latency. It defaults to 5,000,000 microseconds = 5 seconds.
-
-@item cryptokey @var{hexadecimal string} (@emph{input})
-Set decryption key.
-
-@item indexmem @var{integer} (@emph{input})
-Set max memory used for timestamp index (per stream).
-
-@item rtbufsize @var{integer} (@emph{input})
-Set max memory used for buffering real-time frames.
-
-@item fdebug @var{flags} (@emph{input/output})
-Print specific debug info.
-
-Possible values:
-@table @samp
-@item ts
-@end table
-
-@item max_delay @var{integer} (@emph{input/output})
-Set maximum muxing or demuxing delay in microseconds.
-
-@item fpsprobesize @var{integer} (@emph{input})
-Set number of frames used to probe fps.
-
-@item audio_preload @var{integer} (@emph{output})
-Set microseconds by which audio packets should be interleaved earlier.
-
-@item chunk_duration @var{integer} (@emph{output})
-Set microseconds for each chunk.
-
-@item chunk_size @var{integer} (@emph{output})
-Set size in bytes for each chunk.
-
-@item err_detect, f_err_detect @var{flags} (@emph{input})
-Set error detection flags. @code{f_err_detect} is deprecated and
-should be used only via the @command{ffmpeg} tool.
-
-Possible values:
-@table @samp
-@item crccheck
-Verify embedded CRCs.
-@item bitstream
-Detect bitstream specification deviations.
-@item buffer
-Detect improper bitstream length.
-@item explode
-Abort decoding on minor error detection.
-@item careful
-Consider things that violate the spec and have not been seen in the
-wild as errors.
-@item compliant
-Consider all spec non compliancies as errors.
-@item aggressive
-Consider things that a sane encoder should not do as an error.
-@end table
-
-@item use_wallclock_as_timestamps @var{integer} (@emph{input})
-Use wallclock as timestamps.
-
-@item avoid_negative_ts @var{integer} (@emph{output})
-Shift timestamps to make them positive. A value of 1 enables shifting,
-a value of 0 disables it, the default value of -1 enables shifting
-when required by the target format.
-
-When shifting is enabled, all output timestamps are shifted by the
-same amount. Audio, video, and subtitles desynching and relative
-timestamp differences are preserved compared to how they would have
-been without shifting.
-
-Also note that this affects only leading negative timestamps, and not
-non-monotonic negative timestamps.
-
-@item flush_packets @var{integer} (@emph{output})
-Flush the underlying I/O stream after each packet. Default 1 enables it, and
-has the effect of reducing the latency; 0 disables it and may slightly
-increase performance in some cases.
-@end table
-
-@c man end FORMAT OPTIONS
-
-@include demuxers.texi
-@include muxers.texi
-@include metadata.texi
+@include formats.texi
 
 @chapter See Also
 
diff --git a/doc/formats.texi b/doc/formats.texi
new file mode 100644
index 0000000000..44e45329ff
--- /dev/null
+++ b/doc/formats.texi
@@ -0,0 +1,146 @@
+@chapter Format Options
+@c man begin FORMAT OPTIONS
+
+The libavformat library provides some generic global options, which
+can be set on all the muxers and demuxers. In addition each muxer or
+demuxer may support so-called private options, which are specific for
+that component.
+
+Options may be set by specifying -@var{option} @var{value} in the
+FFmpeg tools, or by setting the value explicitly in the
+@code{AVFormatContext} options or using the @file{libavutil/opt.h} API
+for programmatic use.
+
+The list of supported options follows:
+
+@table @option
+@item avioflags @var{flags} (@emph{input/output})
+Possible values:
+@table @samp
+@item direct
+Reduce buffering.
+@end table
+
+@item probesize @var{integer} (@emph{input})
+Set probing size in bytes, i.e. the size of the data to analyze to get
+stream information. A higher value will allow to detect more
+information in case it is dispersed into the stream, but will increase
+latency. Must be an integer not lesser than 32. It is 5000000 by default.
+
+@item packetsize @var{integer} (@emph{output})
+Set packet size.
+
+@item fflags @var{flags} (@emph{input/output})
+Set format flags.
+
+Possible values:
+@table @samp
+@item ignidx
+Ignore index.
+@item genpts
+Generate PTS.
+@item nofillin
+Do not fill in missing values that can be exactly calculated.
+@item noparse
+Disable AVParsers, this needs @code{+nofillin} too.
+@item igndts
+Ignore DTS.
+@item discardcorrupt
+Discard corrupted frames.
+@item sortdts
+Try to interleave output packets by DTS.
+@item keepside
+Do not merge side data.
+@item latm
+Enable RTP MP4A-LATM payload.
+@item nobuffer
+Reduce the latency introduced by optional buffering
+@end table
+
+@item analyzeduration @var{integer} (@emph{input})
+Specify how many microseconds are analyzed to probe the input. A
+higher value will allow to detect more accurate information, but will
+increase latency. It defaults to 5,000,000 microseconds = 5 seconds.
+
+@item cryptokey @var{hexadecimal string} (@emph{input})
+Set decryption key.
+
+@item indexmem @var{integer} (@emph{input})
+Set max memory used for timestamp index (per stream).
+
+@item rtbufsize @var{integer} (@emph{input})
+Set max memory used for buffering real-time frames.
+
+@item fdebug @var{flags} (@emph{input/output})
+Print specific debug info.
+
+Possible values:
+@table @samp
+@item ts
+@end table
+
+@item max_delay @var{integer} (@emph{input/output})
+Set maximum muxing or demuxing delay in microseconds.
+
+@item fpsprobesize @var{integer} (@emph{input})
+Set number of frames used to probe fps.
+
+@item audio_preload @var{integer} (@emph{output})
+Set microseconds by which audio packets should be interleaved earlier.
+
+@item chunk_duration @var{integer} (@emph{output})
+Set microseconds for each chunk.
+
+@item chunk_size @var{integer} (@emph{output})
+Set size in bytes for each chunk.
+
+@item err_detect, f_err_detect @var{flags} (@emph{input})
+Set error detection flags. @code{f_err_detect} is deprecated and
+should be used only via the @command{ffmpeg} tool.
+
+Possible values:
+@table @samp
+@item crccheck
+Verify embedded CRCs.
+@item bitstream
+Detect bitstream specification deviations.
+@item buffer
+Detect improper bitstream length.
+@item explode
+Abort decoding on minor error detection.
+@item careful
+Consider things that violate the spec and have not been seen in the
+wild as errors.
+@item compliant
+Consider all spec non compliancies as errors.
+@item aggressive
+Consider things that a sane encoder should not do as an error.
+@end table
+
+@item use_wallclock_as_timestamps @var{integer} (@emph{input})
+Use wallclock as timestamps.
+
+@item avoid_negative_ts @var{integer} (@emph{output})
+Shift timestamps to make them positive. A value of 1 enables shifting,
+a value of 0 disables it, the default value of -1 enables shifting
+when required by the target format.
+
+When shifting is enabled, all output timestamps are shifted by the
+same amount. Audio, video, and subtitles desynching and relative
+timestamp differences are preserved compared to how they would have
+been without shifting.
+
+Also note that this affects only leading negative timestamps, and not
+non-monotonic negative timestamps.
+
+@item flush_packets @var{integer} (@emph{output})
+Flush the underlying I/O stream after each packet. Default 1 enables it, and
+has the effect of reducing the latency; 0 disables it and may slightly
+increase performance in some cases.
+@end table
+
+@c man end FORMAT OPTIONS
+
+@include demuxers.texi
+@include muxers.texi
+@include metadata.texi