path: root/contrib/libs/llvm12/include/llvm/Bitstream/BitstreamWriter.h

#pragma once

#ifdef __GNUC__
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wunused-parameter"
#endif

//===- BitstreamWriter.h - Low-level bitstream writer interface -*- C++ -*-===//
//
// Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions.
// See https://llvm.org/LICENSE.txt for license information.
// SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception
//
//===----------------------------------------------------------------------===//
//
// This header defines the BitstreamWriter class.  This class can be used to
// write an arbitrary bitstream, regardless of its contents.
//
//===----------------------------------------------------------------------===//

#ifndef LLVM_BITSTREAM_BITSTREAMWRITER_H
#define LLVM_BITSTREAM_BITSTREAMWRITER_H

#include "llvm/ADT/ArrayRef.h"
#include "llvm/ADT/Optional.h"
#include "llvm/ADT/SmallVector.h"
#include "llvm/ADT/StringRef.h"
#include "llvm/Bitstream/BitCodes.h"
#include "llvm/Support/Endian.h"
#include "llvm/Support/raw_ostream.h" 
#include <algorithm> 
#include <vector>

namespace llvm {

class BitstreamWriter {
  /// Out - The buffer that keeps unflushed bytes. 
  SmallVectorImpl<char> &Out;

  /// FS - The file stream that Out flushes to. If FS is nullptr, it does not 
  /// support read or seek, Out cannot be flushed until all data are written. 
  raw_fd_stream *FS; 
 
  /// FlushThreshold - If FS is valid, this is the threshold (unit B) to flush 
  /// FS. 
  const uint64_t FlushThreshold; 
 
  /// CurBit - Always between 0 and 31 inclusive, specifies the next bit to use.
  unsigned CurBit;

  /// CurValue - The current value. Only bits < CurBit are valid. 
  uint32_t CurValue;

  /// CurCodeSize - This is the declared size of code values used for the
  /// current block, in bits.
  unsigned CurCodeSize;

  /// BlockInfoCurBID - When emitting a BLOCKINFO_BLOCK, this is the currently
  /// selected BLOCK ID.
  unsigned BlockInfoCurBID;

  /// CurAbbrevs - Abbrevs installed at in this block.
  std::vector<std::shared_ptr<BitCodeAbbrev>> CurAbbrevs;

  struct Block {
    unsigned PrevCodeSize;
    size_t StartSizeWord;
    std::vector<std::shared_ptr<BitCodeAbbrev>> PrevAbbrevs;
    Block(unsigned PCS, size_t SSW) : PrevCodeSize(PCS), StartSizeWord(SSW) {}
  };

  /// BlockScope - This tracks the current blocks that we have entered.
  std::vector<Block> BlockScope;

  /// BlockInfo - This contains information emitted to BLOCKINFO_BLOCK blocks.
  /// These describe abbreviations that all blocks of the specified ID inherit.
  struct BlockInfo {
    unsigned BlockID;
    std::vector<std::shared_ptr<BitCodeAbbrev>> Abbrevs;
  };
  std::vector<BlockInfo> BlockInfoRecords;

  void WriteByte(unsigned char Value) {
    Out.push_back(Value);
    FlushToFile(); 
  }

  void WriteWord(unsigned Value) {
    Value = support::endian::byte_swap<uint32_t, support::little>(Value);
    Out.append(reinterpret_cast<const char *>(&Value),
               reinterpret_cast<const char *>(&Value + 1));
    FlushToFile(); 
  }

  uint64_t GetNumOfFlushedBytes() const { return FS ? FS->tell() : 0; } 

  size_t GetBufferOffset() const { return Out.size() + GetNumOfFlushedBytes(); } 
 
  size_t GetWordIndex() const {
    size_t Offset = GetBufferOffset();
    assert((Offset & 3) == 0 && "Not 32-bit aligned");
    return Offset / 4;
  }

  /// If the related file stream supports reading, seeking and writing, flush 
  /// the buffer if its size is above a threshold. 
  void FlushToFile() { 
    if (!FS) 
      return; 
    if (Out.size() < FlushThreshold) 
      return; 
    FS->write((char *)&Out.front(), Out.size()); 
    Out.clear(); 
  } 
 
public:
  /// Create a BitstreamWriter that writes to Buffer \p O. 
  /// 
  /// \p FS is the file stream that \p O flushes to incrementally. If \p FS is 
  /// null, \p O does not flush incrementially, but writes to disk at the end. 
  /// 
  /// \p FlushThreshold is the threshold (unit M) to flush \p O if \p FS is 
  /// valid. 
  BitstreamWriter(SmallVectorImpl<char> &O, raw_fd_stream *FS = nullptr, 
                  uint32_t FlushThreshold = 512) 
      : Out(O), FS(FS), FlushThreshold(FlushThreshold << 20), CurBit(0), 
        CurValue(0), CurCodeSize(2) {} 

  ~BitstreamWriter() {
    assert(CurBit == 0 && "Unflushed data remaining");
    assert(BlockScope.empty() && CurAbbrevs.empty() && "Block imbalance");
  }

  /// Retrieve the current position in the stream, in bits.
  uint64_t GetCurrentBitNo() const { return GetBufferOffset() * 8 + CurBit; }

  /// Retrieve the number of bits currently used to encode an abbrev ID.
  unsigned GetAbbrevIDWidth() const { return CurCodeSize; }

  //===--------------------------------------------------------------------===//
  // Basic Primitives for emitting bits to the stream.
  //===--------------------------------------------------------------------===//

  /// Backpatch a 32-bit word in the output at the given bit offset
  /// with the specified value.
  void BackpatchWord(uint64_t BitNo, unsigned NewWord) {
    using namespace llvm::support;
    uint64_t ByteNo = BitNo / 8; 
    uint64_t StartBit = BitNo & 7; 
    uint64_t NumOfFlushedBytes = GetNumOfFlushedBytes(); 
 
    if (ByteNo >= NumOfFlushedBytes) { 
      assert((!endian::readAtBitAlignment<uint32_t, little, unaligned>( 
                 &Out[ByteNo - NumOfFlushedBytes], StartBit)) && 
             "Expected to be patching over 0-value placeholders"); 
      endian::writeAtBitAlignment<uint32_t, little, unaligned>( 
          &Out[ByteNo - NumOfFlushedBytes], NewWord, StartBit); 
      return; 
    } 
 
    // If the byte offset to backpatch is flushed, use seek to backfill data. 
    // First, save the file position to restore later. 
    uint64_t CurPos = FS->tell(); 
 
    // Copy data to update into Bytes from the file FS and the buffer Out. 
    char Bytes[9]; // Use one more byte to silence a warning from Visual C++. 
    size_t BytesNum = StartBit ? 8 : 4; 
    size_t BytesFromDisk = std::min(static_cast<uint64_t>(BytesNum), NumOfFlushedBytes - ByteNo); 
    size_t BytesFromBuffer = BytesNum - BytesFromDisk; 
 
    // When unaligned, copy existing data into Bytes from the file FS and the 
    // buffer Out so that it can be updated before writing. For debug builds 
    // read bytes unconditionally in order to check that the existing value is 0 
    // as expected. 
#ifdef NDEBUG 
    if (StartBit) 
#endif 
    { 
      FS->seek(ByteNo); 
      ssize_t BytesRead = FS->read(Bytes, BytesFromDisk); 
      (void)BytesRead; // silence warning 
      assert(BytesRead >= 0 && static_cast<size_t>(BytesRead) == BytesFromDisk); 
      for (size_t i = 0; i < BytesFromBuffer; ++i) 
        Bytes[BytesFromDisk + i] = Out[i]; 
      assert((!endian::readAtBitAlignment<uint32_t, little, unaligned>( 
                 Bytes, StartBit)) && 
             "Expected to be patching over 0-value placeholders"); 
    } 
 
    // Update Bytes in terms of bit offset and value. 
    endian::writeAtBitAlignment<uint32_t, little, unaligned>(Bytes, NewWord, 
                                                             StartBit); 
 
    // Copy updated data back to the file FS and the buffer Out. 
    FS->seek(ByteNo); 
    FS->write(Bytes, BytesFromDisk); 
    for (size_t i = 0; i < BytesFromBuffer; ++i) 
      Out[i] = Bytes[BytesFromDisk + i]; 
 
    // Restore the file position. 
    FS->seek(CurPos); 
  }

  void BackpatchWord64(uint64_t BitNo, uint64_t Val) {
    BackpatchWord(BitNo, (uint32_t)Val);
    BackpatchWord(BitNo + 32, (uint32_t)(Val >> 32));
  }

  void Emit(uint32_t Val, unsigned NumBits) {
    assert(NumBits && NumBits <= 32 && "Invalid value size!");
    assert((Val & ~(~0U >> (32-NumBits))) == 0 && "High bits set!");
    CurValue |= Val << CurBit;
    if (CurBit + NumBits < 32) {
      CurBit += NumBits;
      return;
    }

    // Add the current word.
    WriteWord(CurValue);

    if (CurBit)
      CurValue = Val >> (32-CurBit);
    else
      CurValue = 0;
    CurBit = (CurBit+NumBits) & 31;
  }

  void FlushToWord() {
    if (CurBit) {
      WriteWord(CurValue);
      CurBit = 0;
      CurValue = 0;
    }
  }

  void EmitVBR(uint32_t Val, unsigned NumBits) {
    assert(NumBits <= 32 && "Too many bits to emit!");
    uint32_t Threshold = 1U << (NumBits-1);

    // Emit the bits with VBR encoding, NumBits-1 bits at a time.
    while (Val >= Threshold) {
      Emit((Val & ((1 << (NumBits-1))-1)) | (1 << (NumBits-1)), NumBits);
      Val >>= NumBits-1;
    }

    Emit(Val, NumBits);
  }

  void EmitVBR64(uint64_t Val, unsigned NumBits) {
    assert(NumBits <= 32 && "Too many bits to emit!");
    if ((uint32_t)Val == Val)
      return EmitVBR((uint32_t)Val, NumBits);

    uint32_t Threshold = 1U << (NumBits-1);

    // Emit the bits with VBR encoding, NumBits-1 bits at a time.
    while (Val >= Threshold) {
      Emit(((uint32_t)Val & ((1 << (NumBits-1))-1)) |
           (1 << (NumBits-1)), NumBits);
      Val >>= NumBits-1;
    }

    Emit((uint32_t)Val, NumBits);
  }

  /// EmitCode - Emit the specified code.
  void EmitCode(unsigned Val) {
    Emit(Val, CurCodeSize);
  }

  //===--------------------------------------------------------------------===//
  // Block Manipulation
  //===--------------------------------------------------------------------===//

  /// getBlockInfo - If there is block info for the specified ID, return it,
  /// otherwise return null.
  BlockInfo *getBlockInfo(unsigned BlockID) {
    // Common case, the most recent entry matches BlockID.
    if (!BlockInfoRecords.empty() && BlockInfoRecords.back().BlockID == BlockID)
      return &BlockInfoRecords.back();

    for (unsigned i = 0, e = static_cast<unsigned>(BlockInfoRecords.size());
         i != e; ++i)
      if (BlockInfoRecords[i].BlockID == BlockID)
        return &BlockInfoRecords[i];
    return nullptr;
  }

  void EnterSubblock(unsigned BlockID, unsigned CodeLen) {
    // Block header:
    //    [ENTER_SUBBLOCK, blockid, newcodelen, <align4bytes>, blocklen]
    EmitCode(bitc::ENTER_SUBBLOCK);
    EmitVBR(BlockID, bitc::BlockIDWidth);
    EmitVBR(CodeLen, bitc::CodeLenWidth);
    FlushToWord();

    size_t BlockSizeWordIndex = GetWordIndex();
    unsigned OldCodeSize = CurCodeSize;

    // Emit a placeholder, which will be replaced when the block is popped.
    Emit(0, bitc::BlockSizeWidth);

    CurCodeSize = CodeLen;

    // Push the outer block's abbrev set onto the stack, start out with an
    // empty abbrev set.
    BlockScope.emplace_back(OldCodeSize, BlockSizeWordIndex);
    BlockScope.back().PrevAbbrevs.swap(CurAbbrevs);

    // If there is a blockinfo for this BlockID, add all the predefined abbrevs
    // to the abbrev list.
    if (BlockInfo *Info = getBlockInfo(BlockID)) {
      CurAbbrevs.insert(CurAbbrevs.end(), Info->Abbrevs.begin(),
                        Info->Abbrevs.end());
    }
  }

  void ExitBlock() {
    assert(!BlockScope.empty() && "Block scope imbalance!");
    const Block &B = BlockScope.back();

    // Block tail:
    //    [END_BLOCK, <align4bytes>]
    EmitCode(bitc::END_BLOCK);
    FlushToWord();

    // Compute the size of the block, in words, not counting the size field.
    size_t SizeInWords = GetWordIndex() - B.StartSizeWord - 1;
    uint64_t BitNo = uint64_t(B.StartSizeWord) * 32;

    // Update the block size field in the header of this sub-block.
    BackpatchWord(BitNo, SizeInWords);

    // Restore the inner block's code size and abbrev table.
    CurCodeSize = B.PrevCodeSize;
    CurAbbrevs = std::move(B.PrevAbbrevs);
    BlockScope.pop_back();
  }

  //===--------------------------------------------------------------------===//
  // Record Emission
  //===--------------------------------------------------------------------===//

private:
  /// EmitAbbreviatedLiteral - Emit a literal value according to its abbrev
  /// record.  This is a no-op, since the abbrev specifies the literal to use.
  template<typename uintty>
  void EmitAbbreviatedLiteral(const BitCodeAbbrevOp &Op, uintty V) {
    assert(Op.isLiteral() && "Not a literal");
    // If the abbrev specifies the literal value to use, don't emit
    // anything.
    assert(V == Op.getLiteralValue() &&
           "Invalid abbrev for record!");
  }

  /// EmitAbbreviatedField - Emit a single scalar field value with the specified
  /// encoding.
  template<typename uintty>
  void EmitAbbreviatedField(const BitCodeAbbrevOp &Op, uintty V) {
    assert(!Op.isLiteral() && "Literals should use EmitAbbreviatedLiteral!");

    // Encode the value as we are commanded.
    switch (Op.getEncoding()) {
    default: llvm_unreachable("Unknown encoding!");
    case BitCodeAbbrevOp::Fixed:
      if (Op.getEncodingData())
        Emit((unsigned)V, (unsigned)Op.getEncodingData());
      break;
    case BitCodeAbbrevOp::VBR:
      if (Op.getEncodingData())
        EmitVBR64(V, (unsigned)Op.getEncodingData());
      break;
    case BitCodeAbbrevOp::Char6:
      Emit(BitCodeAbbrevOp::EncodeChar6((char)V), 6);
      break;
    }
  }

  /// EmitRecordWithAbbrevImpl - This is the core implementation of the record
  /// emission code.  If BlobData is non-null, then it specifies an array of
  /// data that should be emitted as part of the Blob or Array operand that is
  /// known to exist at the end of the record. If Code is specified, then
  /// it is the record code to emit before the Vals, which must not contain
  /// the code.
  template <typename uintty>
  void EmitRecordWithAbbrevImpl(unsigned Abbrev, ArrayRef<uintty> Vals,
                                StringRef Blob, Optional<unsigned> Code) {
    const char *BlobData = Blob.data();
    unsigned BlobLen = (unsigned) Blob.size();
    unsigned AbbrevNo = Abbrev-bitc::FIRST_APPLICATION_ABBREV;
    assert(AbbrevNo < CurAbbrevs.size() && "Invalid abbrev #!");
    const BitCodeAbbrev *Abbv = CurAbbrevs[AbbrevNo].get();

    EmitCode(Abbrev);

    unsigned i = 0, e = static_cast<unsigned>(Abbv->getNumOperandInfos());
    if (Code) {
      assert(e && "Expected non-empty abbreviation");
      const BitCodeAbbrevOp &Op = Abbv->getOperandInfo(i++);

      if (Op.isLiteral())
        EmitAbbreviatedLiteral(Op, Code.getValue());
      else {
        assert(Op.getEncoding() != BitCodeAbbrevOp::Array &&
               Op.getEncoding() != BitCodeAbbrevOp::Blob &&
               "Expected literal or scalar");
        EmitAbbreviatedField(Op, Code.getValue());
      }
    }

    unsigned RecordIdx = 0;
    for (; i != e; ++i) {
      const BitCodeAbbrevOp &Op = Abbv->getOperandInfo(i);
      if (Op.isLiteral()) {
        assert(RecordIdx < Vals.size() && "Invalid abbrev/record");
        EmitAbbreviatedLiteral(Op, Vals[RecordIdx]);
        ++RecordIdx;
      } else if (Op.getEncoding() == BitCodeAbbrevOp::Array) {
        // Array case.
        assert(i + 2 == e && "array op not second to last?");
        const BitCodeAbbrevOp &EltEnc = Abbv->getOperandInfo(++i);

        // If this record has blob data, emit it, otherwise we must have record
        // entries to encode this way.
        if (BlobData) {
          assert(RecordIdx == Vals.size() &&
                 "Blob data and record entries specified for array!");
          // Emit a vbr6 to indicate the number of elements present.
          EmitVBR(static_cast<uint32_t>(BlobLen), 6);

          // Emit each field.
          for (unsigned i = 0; i != BlobLen; ++i)
            EmitAbbreviatedField(EltEnc, (unsigned char)BlobData[i]);

          // Know that blob data is consumed for assertion below.
          BlobData = nullptr;
        } else {
          // Emit a vbr6 to indicate the number of elements present.
          EmitVBR(static_cast<uint32_t>(Vals.size()-RecordIdx), 6);

          // Emit each field.
          for (unsigned e = Vals.size(); RecordIdx != e; ++RecordIdx)
            EmitAbbreviatedField(EltEnc, Vals[RecordIdx]);
        }
      } else if (Op.getEncoding() == BitCodeAbbrevOp::Blob) {
        // If this record has blob data, emit it, otherwise we must have record
        // entries to encode this way.

        if (BlobData) {
          assert(RecordIdx == Vals.size() &&
                 "Blob data and record entries specified for blob operand!");

          assert(Blob.data() == BlobData && "BlobData got moved");
          assert(Blob.size() == BlobLen && "BlobLen got changed");
          emitBlob(Blob);
          BlobData = nullptr;
        } else {
          emitBlob(Vals.slice(RecordIdx));
        }
      } else {  // Single scalar field.
        assert(RecordIdx < Vals.size() && "Invalid abbrev/record");
        EmitAbbreviatedField(Op, Vals[RecordIdx]);
        ++RecordIdx;
      }
    }
    assert(RecordIdx == Vals.size() && "Not all record operands emitted!");
    assert(BlobData == nullptr &&
           "Blob data specified for record that doesn't use it!");
  }

public:
  /// Emit a blob, including flushing before and tail-padding.
  template <class UIntTy>
  void emitBlob(ArrayRef<UIntTy> Bytes, bool ShouldEmitSize = true) {
    // Emit a vbr6 to indicate the number of elements present.
    if (ShouldEmitSize)
      EmitVBR(static_cast<uint32_t>(Bytes.size()), 6);

    // Flush to a 32-bit alignment boundary.
    FlushToWord();

    // Emit literal bytes.
    for (const auto &B : Bytes) {
      assert(isUInt<8>(B) && "Value too large to emit as byte");
      WriteByte((unsigned char)B);
    }

    // Align end to 32-bits.
    while (GetBufferOffset() & 3)
      WriteByte(0);
  }
  void emitBlob(StringRef Bytes, bool ShouldEmitSize = true) {
    emitBlob(makeArrayRef((const uint8_t *)Bytes.data(), Bytes.size()),
             ShouldEmitSize);
  }

  /// EmitRecord - Emit the specified record to the stream, using an abbrev if
  /// we have one to compress the output.
  template <typename Container>
  void EmitRecord(unsigned Code, const Container &Vals, unsigned Abbrev = 0) {
    if (!Abbrev) {
      // If we don't have an abbrev to use, emit this in its fully unabbreviated
      // form.
      auto Count = static_cast<uint32_t>(makeArrayRef(Vals).size());
      EmitCode(bitc::UNABBREV_RECORD);
      EmitVBR(Code, 6);
      EmitVBR(Count, 6);
      for (unsigned i = 0, e = Count; i != e; ++i)
        EmitVBR64(Vals[i], 6);
      return;
    }

    EmitRecordWithAbbrevImpl(Abbrev, makeArrayRef(Vals), StringRef(), Code);
  }

  /// EmitRecordWithAbbrev - Emit a record with the specified abbreviation.
  /// Unlike EmitRecord, the code for the record should be included in Vals as
  /// the first entry.
  template <typename Container>
  void EmitRecordWithAbbrev(unsigned Abbrev, const Container &Vals) {
    EmitRecordWithAbbrevImpl(Abbrev, makeArrayRef(Vals), StringRef(), None);
  }

  /// EmitRecordWithBlob - Emit the specified record to the stream, using an
  /// abbrev that includes a blob at the end.  The blob data to emit is
  /// specified by the pointer and length specified at the end.  In contrast to
  /// EmitRecord, this routine expects that the first entry in Vals is the code
  /// of the record.
  template <typename Container>
  void EmitRecordWithBlob(unsigned Abbrev, const Container &Vals,
                          StringRef Blob) {
    EmitRecordWithAbbrevImpl(Abbrev, makeArrayRef(Vals), Blob, None);
  }
  template <typename Container>
  void EmitRecordWithBlob(unsigned Abbrev, const Container &Vals,
                          const char *BlobData, unsigned BlobLen) {
    return EmitRecordWithAbbrevImpl(Abbrev, makeArrayRef(Vals),
                                    StringRef(BlobData, BlobLen), None);
  }

  /// EmitRecordWithArray - Just like EmitRecordWithBlob, works with records
  /// that end with an array.
  template <typename Container>
  void EmitRecordWithArray(unsigned Abbrev, const Container &Vals,
                           StringRef Array) {
    EmitRecordWithAbbrevImpl(Abbrev, makeArrayRef(Vals), Array, None);
  }
  template <typename Container>
  void EmitRecordWithArray(unsigned Abbrev, const Container &Vals,
                           const char *ArrayData, unsigned ArrayLen) {
    return EmitRecordWithAbbrevImpl(Abbrev, makeArrayRef(Vals),
                                    StringRef(ArrayData, ArrayLen), None);
  }

  //===--------------------------------------------------------------------===//
  // Abbrev Emission
  //===--------------------------------------------------------------------===//

private:
  // Emit the abbreviation as a DEFINE_ABBREV record.
  void EncodeAbbrev(const BitCodeAbbrev &Abbv) {
    EmitCode(bitc::DEFINE_ABBREV);
    EmitVBR(Abbv.getNumOperandInfos(), 5);
    for (unsigned i = 0, e = static_cast<unsigned>(Abbv.getNumOperandInfos());
         i != e; ++i) {
      const BitCodeAbbrevOp &Op = Abbv.getOperandInfo(i);
      Emit(Op.isLiteral(), 1);
      if (Op.isLiteral()) {
        EmitVBR64(Op.getLiteralValue(), 8);
      } else {
        Emit(Op.getEncoding(), 3);
        if (Op.hasEncodingData())
          EmitVBR64(Op.getEncodingData(), 5);
      }
    }
  }
public:

  /// Emits the abbreviation \p Abbv to the stream.
  unsigned EmitAbbrev(std::shared_ptr<BitCodeAbbrev> Abbv) {
    EncodeAbbrev(*Abbv);
    CurAbbrevs.push_back(std::move(Abbv));
    return static_cast<unsigned>(CurAbbrevs.size())-1 +
      bitc::FIRST_APPLICATION_ABBREV;
  }

  //===--------------------------------------------------------------------===//
  // BlockInfo Block Emission
  //===--------------------------------------------------------------------===//

  /// EnterBlockInfoBlock - Start emitting the BLOCKINFO_BLOCK.
  void EnterBlockInfoBlock() {
    EnterSubblock(bitc::BLOCKINFO_BLOCK_ID, 2);
    BlockInfoCurBID = ~0U;
    BlockInfoRecords.clear();
  }
private:
  /// SwitchToBlockID - If we aren't already talking about the specified block
  /// ID, emit a BLOCKINFO_CODE_SETBID record.
  void SwitchToBlockID(unsigned BlockID) {
    if (BlockInfoCurBID == BlockID) return;
    SmallVector<unsigned, 2> V;
    V.push_back(BlockID);
    EmitRecord(bitc::BLOCKINFO_CODE_SETBID, V);
    BlockInfoCurBID = BlockID;
  }

  BlockInfo &getOrCreateBlockInfo(unsigned BlockID) {
    if (BlockInfo *BI = getBlockInfo(BlockID))
      return *BI;

    // Otherwise, add a new record.
    BlockInfoRecords.emplace_back();
    BlockInfoRecords.back().BlockID = BlockID;
    return BlockInfoRecords.back();
  }

public:

  /// EmitBlockInfoAbbrev - Emit a DEFINE_ABBREV record for the specified
  /// BlockID.
  unsigned EmitBlockInfoAbbrev(unsigned BlockID, std::shared_ptr<BitCodeAbbrev> Abbv) {
    SwitchToBlockID(BlockID);
    EncodeAbbrev(*Abbv);

    // Add the abbrev to the specified block record.
    BlockInfo &Info = getOrCreateBlockInfo(BlockID);
    Info.Abbrevs.push_back(std::move(Abbv));

    return Info.Abbrevs.size()-1+bitc::FIRST_APPLICATION_ABBREV;
  }
};


} // End llvm namespace

#endif

#ifdef __GNUC__
#pragma GCC diagnostic pop
#endif