Restoring authorship annotation for Dmitry Potapov <potapov.d@gmail.com>. Commit 1 of 2.

1 files changed, 745 insertions, 745 deletions

diff --git a/contrib/libs/pcre/sljit/sljitConfigInternal.h b/contrib/libs/pcre/sljit/sljitConfigInternal.h
index acba9da4be..175d6676f7 100644
--- a/contrib/libs/pcre/sljit/sljitConfigInternal.h
+++ b/contrib/libs/pcre/sljit/sljitConfigInternal.h
@@ -1,745 +1,745 @@
-/*
- *    Stack-less Just-In-Time compiler
- *
- *    Copyright Zoltan Herczeg (hzmester@freemail.hu). All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without modification, are
- * permitted provided that the following conditions are met:
- *
- *   1. Redistributions of source code must retain the above copyright notice, this list of
- *      conditions and the following disclaimer.
- *
- *   2. Redistributions in binary form must reproduce the above copyright notice, this list
- *      of conditions and the following disclaimer in the documentation and/or other materials
- *      provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) AND CONTRIBUTORS ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
- * SHALL THE COPYRIGHT HOLDER(S) OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
- * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _SLJIT_CONFIG_INTERNAL_H_
-#define _SLJIT_CONFIG_INTERNAL_H_
-
-/*
-   SLJIT defines the following architecture dependent types and macros:
-
-   Types:
-     sljit_s8, sljit_u8   : signed and unsigned 8 bit integer type
-     sljit_s16, sljit_u16 : signed and unsigned 16 bit integer type
-     sljit_s32, sljit_u32 : signed and unsigned 32 bit integer type
-     sljit_sw, sljit_uw   : signed and unsigned machine word, enough to store a pointer
-     sljit_p              : unsgined pointer value (usually the same as sljit_uw, but
-                            some 64 bit ABIs may use 32 bit pointers)
-     sljit_f32            : 32 bit single precision floating point value
-     sljit_f64            : 64 bit double precision floating point value
-
-   Macros for feature detection (boolean):
-     SLJIT_32BIT_ARCHITECTURE : 32 bit architecture
-     SLJIT_64BIT_ARCHITECTURE : 64 bit architecture
-     SLJIT_LITTLE_ENDIAN : little endian architecture
-     SLJIT_BIG_ENDIAN : big endian architecture
-     SLJIT_UNALIGNED : allows unaligned memory accesses for non-fpu operations (only!)
-     SLJIT_INDIRECT_CALL : see SLJIT_FUNC_OFFSET() for more information
-
-   Constants:
-     SLJIT_NUMBER_OF_REGISTERS : number of available registers
-     SLJIT_NUMBER_OF_SCRATCH_REGISTERS : number of available scratch registers
-     SLJIT_NUMBER_OF_SAVED_REGISTERS : number of available saved registers
-     SLJIT_NUMBER_OF_FLOAT_REGISTERS : number of available floating point registers
-     SLJIT_NUMBER_OF_SCRATCH_FLOAT_REGISTERS : number of available floating point scratch registers
-     SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS : number of available floating point saved registers
-     SLJIT_WORD_SHIFT : the shift required to apply when accessing a sljit_sw/sljit_uw array by index
-     SLJIT_F32_SHIFT : the shift required to apply when accessing
-                       a single precision floating point array by index
-     SLJIT_F64_SHIFT : the shift required to apply when accessing
-                       a double precision floating point array by index
-     SLJIT_PREF_SHIFT_REG : x86 systems prefers ecx for shifting by register
-                            the scratch register index of ecx is stored in this variable
-     SLJIT_LOCALS_OFFSET : local space starting offset (SLJIT_SP + SLJIT_LOCALS_OFFSET)
-     SLJIT_RETURN_ADDRESS_OFFSET : a return instruction always adds this offset to the return address
-
-   Other macros:
-     SLJIT_FUNC : calling convention attribute for both calling JIT from C and C calling back from JIT
-     SLJIT_W(number) : defining 64 bit constants on 64 bit architectures (compiler independent helper)
-*/
-
-/*****************/
-/* Sanity check. */
-/*****************/
-
-#if !((defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \
-	|| (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \
-	|| (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) \
-	|| (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \
-	|| (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) \
-	|| (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \
-	|| (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \
-	|| (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) \
-	|| (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) \
-	|| (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) \
-	|| (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) \
-	|| (defined SLJIT_CONFIG_TILEGX && SLJIT_CONFIG_TILEGX) \
-	|| (defined SLJIT_CONFIG_AUTO && SLJIT_CONFIG_AUTO) \
-	|| (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED))
-#error "An architecture must be selected"
-#endif
-
-#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \
-	+ (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \
-	+ (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) \
-	+ (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \
-	+ (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) \
-	+ (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \
-	+ (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \
-	+ (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) \
-	+ (defined SLJIT_CONFIG_TILEGX && SLJIT_CONFIG_TILEGX) \
-	+ (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) \
-	+ (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) \
-	+ (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) \
-	+ (defined SLJIT_CONFIG_AUTO && SLJIT_CONFIG_AUTO) \
-	+ (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED) >= 2
-#error "Multiple architectures are selected"
-#endif
-
-/********************************************************/
-/* Automatic CPU detection (requires compiler support). */
-/********************************************************/
-
-#if (defined SLJIT_CONFIG_AUTO && SLJIT_CONFIG_AUTO)
-
-#ifndef _WIN32
-
-#if defined(__i386__) || defined(__i386)
-#define SLJIT_CONFIG_X86_32 1
-#elif defined(__x86_64__)
-#define SLJIT_CONFIG_X86_64 1
-#elif defined(__arm__) || defined(__ARM__)
-#ifdef __thumb2__
-#define SLJIT_CONFIG_ARM_THUMB2 1
-#elif defined(__ARM_ARCH_7__) || defined(__ARM_ARCH_7A__) || defined(__ARM_ARCH_7R__)
-#define SLJIT_CONFIG_ARM_V7 1
-#else
-#define SLJIT_CONFIG_ARM_V5 1
-#endif
-#elif defined (__aarch64__)
-#define SLJIT_CONFIG_ARM_64 1
-#elif defined(__ppc64__) || defined(__powerpc64__) || defined(_ARCH_PPC64) || (defined(_POWER) && defined(__64BIT__))
-#define SLJIT_CONFIG_PPC_64 1
-#elif defined(__ppc__) || defined(__powerpc__) || defined(_ARCH_PPC) || defined(_ARCH_PWR) || defined(_ARCH_PWR2) || defined(_POWER)
-#define SLJIT_CONFIG_PPC_32 1
-#elif defined(__mips__) && !defined(_LP64)
-#define SLJIT_CONFIG_MIPS_32 1
-#elif defined(__mips64)
-#define SLJIT_CONFIG_MIPS_64 1
-#elif defined(__sparc__) || defined(__sparc)
-#define SLJIT_CONFIG_SPARC_32 1
-#elif defined(__tilegx__)
-#define SLJIT_CONFIG_TILEGX 1
-#else
-/* Unsupported architecture */
-#define SLJIT_CONFIG_UNSUPPORTED 1
-#endif
-
-#else /* _WIN32 */
-
-#if defined(_M_X64) || defined(__x86_64__)
-#define SLJIT_CONFIG_X86_64 1
-#elif (defined(_M_ARM) && _M_ARM >= 7 && defined(_M_ARMT)) || defined(__thumb2__)
-#define SLJIT_CONFIG_ARM_THUMB2 1
-#elif (defined(_M_ARM) && _M_ARM >= 7)
-#define SLJIT_CONFIG_ARM_V7 1
-#elif defined(_ARM_)
-#define SLJIT_CONFIG_ARM_V5 1
-#elif defined(_M_ARM64) || defined(__aarch64__)
-#define SLJIT_CONFIG_ARM_64 1
-#else
-#define SLJIT_CONFIG_X86_32 1
-#endif
-
-#endif /* !_WIN32 */
-#endif /* SLJIT_CONFIG_AUTO */
-
-#if (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED)
-#undef SLJIT_EXECUTABLE_ALLOCATOR
-#endif
-
-/******************************/
-/* CPU family type detection. */
-/******************************/
-
-#if (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \
-	|| (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2)
-#define SLJIT_CONFIG_ARM_32 1
-#endif
-
-#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) || (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64)
-#define SLJIT_CONFIG_X86 1
-#elif (defined SLJIT_CONFIG_ARM_32 && SLJIT_CONFIG_ARM_32) || (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64)
-#define SLJIT_CONFIG_ARM 1
-#elif (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) || (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
-#define SLJIT_CONFIG_PPC 1
-#elif (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) || (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64)
-#define SLJIT_CONFIG_MIPS 1
-#elif (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) || (defined SLJIT_CONFIG_SPARC_64 && SLJIT_CONFIG_SPARC_64)
-#define SLJIT_CONFIG_SPARC 1
-#endif
-
-/**********************************/
-/* External function definitions. */
-/**********************************/
-
-/* General macros:
-   Note: SLJIT is designed to be independent from them as possible.
-
-   In release mode (SLJIT_DEBUG is not defined) only the following
-   external functions are needed:
-*/
-
-#ifndef SLJIT_MALLOC
-#define SLJIT_MALLOC(size, allocator_data) malloc(size)
-#endif
-
-#ifndef SLJIT_FREE
-#define SLJIT_FREE(ptr, allocator_data) free(ptr)
-#endif
-
-#ifndef SLJIT_MEMCPY
-#define SLJIT_MEMCPY(dest, src, len) memcpy(dest, src, len)
-#endif
-
-#ifndef SLJIT_MEMMOVE
-#define SLJIT_MEMMOVE(dest, src, len) memmove(dest, src, len)
-#endif
-
-#ifndef SLJIT_ZEROMEM
-#define SLJIT_ZEROMEM(dest, len) memset(dest, 0, len)
-#endif
-
-/***************************/
-/* Compiler helper macros. */
-/***************************/
-
-#if !defined(SLJIT_LIKELY) && !defined(SLJIT_UNLIKELY)
-
-#if defined(__GNUC__) && (__GNUC__ >= 3)
-#define SLJIT_LIKELY(x)		__builtin_expect((x), 1)
-#define SLJIT_UNLIKELY(x)	__builtin_expect((x), 0)
-#else
-#define SLJIT_LIKELY(x)		(x)
-#define SLJIT_UNLIKELY(x)	(x)
-#endif
-
-#endif /* !defined(SLJIT_LIKELY) && !defined(SLJIT_UNLIKELY) */
-
-#ifndef SLJIT_INLINE
-/* Inline functions. Some old compilers do not support them. */
-#if defined(__SUNPRO_C) && __SUNPRO_C <= 0x510
-#define SLJIT_INLINE
-#else
-#define SLJIT_INLINE __inline
-#endif
-#endif /* !SLJIT_INLINE */
-
-#ifndef SLJIT_NOINLINE
-/* Not inline functions. */
-#if defined(__GNUC__)
-#define SLJIT_NOINLINE __attribute__ ((noinline))
-#else
-#define SLJIT_NOINLINE
-#endif
-#endif /* !SLJIT_INLINE */
-
-#ifndef SLJIT_UNUSED_ARG
-/* Unused arguments. */
-#define SLJIT_UNUSED_ARG(arg) (void)arg
-#endif
-
-/*********************************/
-/* Type of public API functions. */
-/*********************************/
-
-#if (defined SLJIT_CONFIG_STATIC && SLJIT_CONFIG_STATIC)
-/* Static ABI functions. For all-in-one programs. */
-
-#if defined(__GNUC__)
-/* Disable unused warnings in gcc. */
-#define SLJIT_API_FUNC_ATTRIBUTE static __attribute__((unused))
-#else
-#define SLJIT_API_FUNC_ATTRIBUTE static
-#endif
-
-#else
-#define SLJIT_API_FUNC_ATTRIBUTE
-#endif /* (defined SLJIT_CONFIG_STATIC && SLJIT_CONFIG_STATIC) */
-
-/****************************/
-/* Instruction cache flush. */
-/****************************/
-
-#if (!defined SLJIT_CACHE_FLUSH && defined __has_builtin)
-#if __has_builtin(__builtin___clear_cache)
-
-#define SLJIT_CACHE_FLUSH(from, to) \
-	__builtin___clear_cache((char*)from, (char*)to)
-
-#endif /* __has_builtin(__builtin___clear_cache) */
-#endif /* (!defined SLJIT_CACHE_FLUSH && defined __has_builtin) */
-
-#ifndef SLJIT_CACHE_FLUSH
-
-#if (defined SLJIT_CONFIG_X86 && SLJIT_CONFIG_X86)
-
-/* Not required to implement on archs with unified caches. */
-#define SLJIT_CACHE_FLUSH(from, to)
-
-#elif defined __APPLE__
-
-/* Supported by all macs since Mac OS 10.5.
-   However, it does not work on non-jailbroken iOS devices,
-   although the compilation is successful. */
-
-#define SLJIT_CACHE_FLUSH(from, to) \
-	sys_icache_invalidate((char*)(from), (char*)(to) - (char*)(from))
-
-#elif (defined SLJIT_CONFIG_PPC && SLJIT_CONFIG_PPC)
-
-/* The __clear_cache() implementation of GCC is a dummy function on PowerPC. */
-#define SLJIT_CACHE_FLUSH(from, to) \
-	ppc_cache_flush((from), (to))
-#define SLJIT_CACHE_FLUSH_OWN_IMPL 1
-
-#elif (defined(__GNUC__) && (__GNUC__ >= 5 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 3)))
-
-#define SLJIT_CACHE_FLUSH(from, to) \
-	__builtin___clear_cache((char*)from, (char*)to)
-
-#elif defined __ANDROID__
-
-/* Android lacks __clear_cache; instead, cacheflush should be used. */
-
-#define SLJIT_CACHE_FLUSH(from, to) \
-    cacheflush((long)(from), (long)(to), 0)
-
-#elif (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32)
-
-/* The __clear_cache() implementation of GCC is a dummy function on Sparc. */
-#define SLJIT_CACHE_FLUSH(from, to) \
-	sparc_cache_flush((from), (to))
-#define SLJIT_CACHE_FLUSH_OWN_IMPL 1
-
-#elif defined _WIN32
-
-#define SLJIT_CACHE_FLUSH(from, to) \
-	FlushInstructionCache(GetCurrentProcess(), (char*)(from), (char*)(to) - (char*)(from))
-
-#else
-
-/* Calls __ARM_NR_cacheflush on ARM-Linux. */
-#define SLJIT_CACHE_FLUSH(from, to) \
-	__clear_cache((char*)(from), (char*)(to))
-
-#endif
-
-#endif /* !SLJIT_CACHE_FLUSH */
-
-/******************************************************/
-/*    Integer and floating point type definitions.    */
-/******************************************************/
-
-/* 8 bit byte type. */
-typedef unsigned char sljit_u8;
-typedef signed char sljit_s8;
-
-/* 16 bit half-word type. */
-typedef unsigned short int sljit_u16;
-typedef signed short int sljit_s16;
-
-/* 32 bit integer type. */
-typedef unsigned int sljit_u32;
-typedef signed int sljit_s32;
-
-/* Machine word type. Enough for storing a pointer.
-     32 bit for 32 bit machines.
-     64 bit for 64 bit machines. */
-#if (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED)
-/* Just to have something. */
-#define SLJIT_WORD_SHIFT 0
-typedef unsigned long int sljit_uw;
-typedef long int sljit_sw;
-#elif !(defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \
-	&& !(defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \
-	&& !(defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) \
-	&& !(defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) \
-	&& !(defined SLJIT_CONFIG_TILEGX && SLJIT_CONFIG_TILEGX)
-#define SLJIT_32BIT_ARCHITECTURE 1
-#define SLJIT_WORD_SHIFT 2
-typedef unsigned int sljit_uw;
-typedef int sljit_sw;
-#else
-#define SLJIT_64BIT_ARCHITECTURE 1
-#define SLJIT_WORD_SHIFT 3
-#ifdef _WIN32
-#ifdef __GNUC__
-/* These types do not require windows.h */
-typedef unsigned long long sljit_uw;
-typedef long long sljit_sw;
-#else
-typedef unsigned __int64 sljit_uw;
-typedef __int64 sljit_sw;
-#endif
-#else /* !_WIN32 */
-typedef unsigned long int sljit_uw;
-typedef long int sljit_sw;
-#endif /* _WIN32 */
-#endif
-
-typedef sljit_uw sljit_p;
-
-/* Floating point types. */
-typedef float sljit_f32;
-typedef double sljit_f64;
-
-/* Shift for pointer sized data. */
-#define SLJIT_POINTER_SHIFT SLJIT_WORD_SHIFT
-
-/* Shift for double precision sized data. */
-#define SLJIT_F32_SHIFT 2
-#define SLJIT_F64_SHIFT 3
-
-#ifndef SLJIT_W
-
-/* Defining long constants. */
-#if (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED)
-#define SLJIT_W(w)	(w##l)
-#elif (defined SLJIT_64BIT_ARCHITECTURE && SLJIT_64BIT_ARCHITECTURE)
-#define SLJIT_W(w)	(w##ll)
-#else
-#define SLJIT_W(w)	(w)
-#endif
-
-#endif /* !SLJIT_W */
-
-/*************************/
-/* Endianness detection. */
-/*************************/
-
-#if !defined(SLJIT_BIG_ENDIAN) && !defined(SLJIT_LITTLE_ENDIAN)
-
-/* These macros are mostly useful for the applications. */
-#if (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \
-	|| (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
-
-#ifdef __LITTLE_ENDIAN__
-#define SLJIT_LITTLE_ENDIAN 1
-#else
-#define SLJIT_BIG_ENDIAN 1
-#endif
-
-#elif (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) \
-	|| (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64)
-
-#ifdef __MIPSEL__
-#define SLJIT_LITTLE_ENDIAN 1
-#else
-#define SLJIT_BIG_ENDIAN 1
-#endif
-
-#elif (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32)
-
-#define SLJIT_BIG_ENDIAN 1
-
-#else
-#define SLJIT_LITTLE_ENDIAN 1
-#endif
-
-#endif /* !defined(SLJIT_BIG_ENDIAN) && !defined(SLJIT_LITTLE_ENDIAN) */
-
-/* Sanity check. */
-#if (defined SLJIT_BIG_ENDIAN && SLJIT_BIG_ENDIAN) && (defined SLJIT_LITTLE_ENDIAN && SLJIT_LITTLE_ENDIAN)
-#error "Exactly one endianness must be selected"
-#endif
-
-#if !(defined SLJIT_BIG_ENDIAN && SLJIT_BIG_ENDIAN) && !(defined SLJIT_LITTLE_ENDIAN && SLJIT_LITTLE_ENDIAN)
-#error "Exactly one endianness must be selected"
-#endif
-
-#ifndef SLJIT_UNALIGNED
-
-#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \
-	|| (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \
-	|| (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \
-	|| (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) \
-	|| (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \
-	|| (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \
-	|| (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
-#define SLJIT_UNALIGNED 1
-#endif
-
-#endif /* !SLJIT_UNALIGNED */
-
-#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
-/* Auto detect SSE2 support using CPUID.
-   On 64 bit x86 cpus, sse2 must be present. */
-#define SLJIT_DETECT_SSE2 1
-#endif
-
-/*****************************************************************************************/
-/* Calling convention of functions generated by SLJIT or called from the generated code. */
-/*****************************************************************************************/
-
-#ifndef SLJIT_FUNC
-
-#if (defined SLJIT_USE_CDECL_CALLING_CONVENTION && SLJIT_USE_CDECL_CALLING_CONVENTION)
-
-/* Force cdecl. */
-#define SLJIT_FUNC
-
-#elif (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
-
-#if defined(__GNUC__) && !defined(__APPLE__)
-
-#define SLJIT_FUNC __attribute__ ((fastcall))
-#define SLJIT_X86_32_FASTCALL 1
-
-#elif defined(_MSC_VER)
-
-#define SLJIT_FUNC __fastcall
-#define SLJIT_X86_32_FASTCALL 1
-
-#elif defined(__BORLANDC__)
-
-#define SLJIT_FUNC __msfastcall
-#define SLJIT_X86_32_FASTCALL 1
-
-#else /* Unknown compiler. */
-
-/* The cdecl attribute is the default. */
-#define SLJIT_FUNC
-
-#endif
-
-#else /* Non x86-32 architectures. */
-
-#define SLJIT_FUNC
-
-#endif /* SLJIT_CONFIG_X86_32 */
-
-#endif /* !SLJIT_FUNC */
-
-#ifndef SLJIT_INDIRECT_CALL
-#if ((defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) && (!defined _CALL_ELF || _CALL_ELF == 1)) \
-	|| ((defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) && defined _AIX)
-/* It seems certain ppc compilers use an indirect addressing for functions
-   which makes things complicated. */
-#define SLJIT_INDIRECT_CALL 1
-#endif
-#endif /* SLJIT_INDIRECT_CALL */
-
-/* The offset which needs to be substracted from the return address to
-determine the next executed instruction after return. */
-#ifndef SLJIT_RETURN_ADDRESS_OFFSET
-#if (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32)
-#define SLJIT_RETURN_ADDRESS_OFFSET 8
-#else
-#define SLJIT_RETURN_ADDRESS_OFFSET 0
-#endif
-#endif /* SLJIT_RETURN_ADDRESS_OFFSET */
-
-/***************************************************/
-/* Functions of the built-in executable allocator. */
-/***************************************************/
-
-#if (defined SLJIT_EXECUTABLE_ALLOCATOR && SLJIT_EXECUTABLE_ALLOCATOR)
-SLJIT_API_FUNC_ATTRIBUTE void* sljit_malloc_exec(sljit_uw size);
-SLJIT_API_FUNC_ATTRIBUTE void sljit_free_exec(void* ptr);
-SLJIT_API_FUNC_ATTRIBUTE void sljit_free_unused_memory_exec(void);
-#define SLJIT_MALLOC_EXEC(size) sljit_malloc_exec(size)
-#define SLJIT_FREE_EXEC(ptr) sljit_free_exec(ptr)
-
-#if (defined SLJIT_PROT_EXECUTABLE_ALLOCATOR && SLJIT_PROT_EXECUTABLE_ALLOCATOR)
-SLJIT_API_FUNC_ATTRIBUTE sljit_sw sljit_exec_offset(void* ptr);
-#define SLJIT_EXEC_OFFSET(ptr) sljit_exec_offset(ptr)
-#else
-#define SLJIT_EXEC_OFFSET(ptr) 0
-#endif
-
-#endif
-
-/**********************************************/
-/* Registers and locals offset determination. */
-/**********************************************/
-
-#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
-
-#define SLJIT_NUMBER_OF_REGISTERS 12
-#define SLJIT_NUMBER_OF_SAVED_REGISTERS 9
-#define SLJIT_LOCALS_OFFSET_BASE (compiler->locals_offset)
-#define SLJIT_PREF_SHIFT_REG SLJIT_R2
-
-#elif (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64)
-
-#define SLJIT_NUMBER_OF_REGISTERS 13
-#ifndef _WIN64
-#define SLJIT_NUMBER_OF_SAVED_REGISTERS 6
-#define SLJIT_LOCALS_OFFSET_BASE 0
-#else /* _WIN64 */
-#define SLJIT_NUMBER_OF_SAVED_REGISTERS 8
-#define SLJIT_LOCALS_OFFSET_BASE (compiler->locals_offset)
-#endif /* !_WIN64 */
-#define SLJIT_PREF_SHIFT_REG SLJIT_R3
-
-#elif (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7)
-
-#define SLJIT_NUMBER_OF_REGISTERS 12
-#define SLJIT_NUMBER_OF_SAVED_REGISTERS 8
-#define SLJIT_LOCALS_OFFSET_BASE 0
-
-#elif (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2)
-
-#define SLJIT_NUMBER_OF_REGISTERS 12
-#define SLJIT_NUMBER_OF_SAVED_REGISTERS 8
-#define SLJIT_LOCALS_OFFSET_BASE 0
-
-#elif (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64)
-
-#define SLJIT_NUMBER_OF_REGISTERS 26
-#define SLJIT_NUMBER_OF_SAVED_REGISTERS 10
-#define SLJIT_LOCALS_OFFSET_BASE 0
-
-#elif (defined SLJIT_CONFIG_PPC && SLJIT_CONFIG_PPC)
-
-#define SLJIT_NUMBER_OF_REGISTERS 23
-#define SLJIT_NUMBER_OF_SAVED_REGISTERS 17
-#if (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) || (defined _AIX)
-#define SLJIT_LOCALS_OFFSET_BASE ((6 + 8) * sizeof(sljit_sw))
-#elif (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32)
-/* Add +1 for double alignment. */
-#define SLJIT_LOCALS_OFFSET_BASE ((3 + 1) * sizeof(sljit_sw))
-#else
-#define SLJIT_LOCALS_OFFSET_BASE (3 * sizeof(sljit_sw))
-#endif /* SLJIT_CONFIG_PPC_64 || _AIX */
-
-#elif (defined SLJIT_CONFIG_MIPS && SLJIT_CONFIG_MIPS)
-
-#define SLJIT_NUMBER_OF_REGISTERS 21
-#define SLJIT_NUMBER_OF_SAVED_REGISTERS 8
-#if (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32)
-#define SLJIT_LOCALS_OFFSET_BASE (4 * sizeof(sljit_sw))
-#else
-#define SLJIT_LOCALS_OFFSET_BASE 0
-#endif
-
-#elif (defined SLJIT_CONFIG_SPARC && SLJIT_CONFIG_SPARC)
-
-#define SLJIT_NUMBER_OF_REGISTERS 18
-#define SLJIT_NUMBER_OF_SAVED_REGISTERS 14
-#if (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32)
-/* saved registers (16), return struct pointer (1), space for 6 argument words (1),
-   4th double arg (2), double alignment (1). */
-#define SLJIT_LOCALS_OFFSET_BASE ((16 + 1 + 6 + 2 + 1) * sizeof(sljit_sw))
-#endif
-
-#elif (defined SLJIT_CONFIG_TILEGX && SLJIT_CONFIG_TILEGX)
-
-#define SLJIT_NUMBER_OF_REGISTERS 10
-#define SLJIT_NUMBER_OF_SAVED_REGISTERS 5
-#define SLJIT_LOCALS_OFFSET_BASE 0
-
-#elif (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED)
-
-#define SLJIT_NUMBER_OF_REGISTERS 0
-#define SLJIT_NUMBER_OF_SAVED_REGISTERS 0
-#define SLJIT_LOCALS_OFFSET_BASE 0
-
-#endif
-
-#define SLJIT_LOCALS_OFFSET (SLJIT_LOCALS_OFFSET_BASE)
-
-#define SLJIT_NUMBER_OF_SCRATCH_REGISTERS \
-	(SLJIT_NUMBER_OF_REGISTERS - SLJIT_NUMBER_OF_SAVED_REGISTERS)
-
-#define SLJIT_NUMBER_OF_FLOAT_REGISTERS 6
-#if (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) && (defined _WIN64)
-#define SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS 1
-#else
-#define SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS 0
-#endif
-
-#define SLJIT_NUMBER_OF_SCRATCH_FLOAT_REGISTERS \
-	(SLJIT_NUMBER_OF_FLOAT_REGISTERS - SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS)
-
-/*************************************/
-/* Debug and verbose related macros. */
-/*************************************/
-
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
-#include <stdio.h>
-#endif
-
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
-
-#if !defined(SLJIT_ASSERT) || !defined(SLJIT_UNREACHABLE)
-
-/* SLJIT_HALT_PROCESS must halt the process. */
-#ifndef SLJIT_HALT_PROCESS
-#include <stdlib.h>
-
-#define SLJIT_HALT_PROCESS() \
-	abort();
-#endif /* !SLJIT_HALT_PROCESS */
-
-#include <stdio.h>
-
-#endif /* !SLJIT_ASSERT || !SLJIT_UNREACHABLE */
-
-/* Feel free to redefine these two macros. */
-#ifndef SLJIT_ASSERT
-
-#define SLJIT_ASSERT(x) \
-	do { \
-		if (SLJIT_UNLIKELY(!(x))) { \
-			printf("Assertion failed at " __FILE__ ":%d\n", __LINE__); \
-			SLJIT_HALT_PROCESS(); \
-		} \
-	} while (0)
-
-#endif /* !SLJIT_ASSERT */
-
-#ifndef SLJIT_UNREACHABLE
-
-#define SLJIT_UNREACHABLE() \
-	do { \
-		printf("Should never been reached " __FILE__ ":%d\n", __LINE__); \
-		SLJIT_HALT_PROCESS(); \
-	} while (0)
-
-#endif /* !SLJIT_UNREACHABLE */
-
-#else /* (defined SLJIT_DEBUG && SLJIT_DEBUG) */
-
-/* Forcing empty, but valid statements. */
-#undef SLJIT_ASSERT
-#undef SLJIT_UNREACHABLE
-
-#define SLJIT_ASSERT(x) \
-	do { } while (0)
-#define SLJIT_UNREACHABLE() \
-	do { } while (0)
-
-#endif /* (defined SLJIT_DEBUG && SLJIT_DEBUG) */
-
-#ifndef SLJIT_COMPILE_ASSERT
-
-#define SLJIT_COMPILE_ASSERT(x, description) \
-	switch(0) { case 0: case ((x) ? 1 : 0): break; }
-
-#endif /* !SLJIT_COMPILE_ASSERT */
-
-#endif
+/* 
+ *    Stack-less Just-In-Time compiler 
+ * 
+ *    Copyright Zoltan Herczeg (hzmester@freemail.hu). All rights reserved. 
+ * 
+ * Redistribution and use in source and binary forms, with or without modification, are 
+ * permitted provided that the following conditions are met: 
+ * 
+ *   1. Redistributions of source code must retain the above copyright notice, this list of 
+ *      conditions and the following disclaimer. 
+ * 
+ *   2. Redistributions in binary form must reproduce the above copyright notice, this list 
+ *      of conditions and the following disclaimer in the documentation and/or other materials 
+ *      provided with the distribution. 
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) AND CONTRIBUTORS ``AS IS'' AND ANY 
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT 
+ * SHALL THE COPYRIGHT HOLDER(S) OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED 
+ * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR 
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN 
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 
+ */ 
+ 
+#ifndef _SLJIT_CONFIG_INTERNAL_H_ 
+#define _SLJIT_CONFIG_INTERNAL_H_ 
+ 
+/* 
+   SLJIT defines the following architecture dependent types and macros: 
+ 
+   Types: 
+     sljit_s8, sljit_u8   : signed and unsigned 8 bit integer type 
+     sljit_s16, sljit_u16 : signed and unsigned 16 bit integer type 
+     sljit_s32, sljit_u32 : signed and unsigned 32 bit integer type 
+     sljit_sw, sljit_uw   : signed and unsigned machine word, enough to store a pointer 
+     sljit_p              : unsgined pointer value (usually the same as sljit_uw, but 
+                            some 64 bit ABIs may use 32 bit pointers) 
+     sljit_f32            : 32 bit single precision floating point value 
+     sljit_f64            : 64 bit double precision floating point value 
+ 
+   Macros for feature detection (boolean): 
+     SLJIT_32BIT_ARCHITECTURE : 32 bit architecture 
+     SLJIT_64BIT_ARCHITECTURE : 64 bit architecture 
+     SLJIT_LITTLE_ENDIAN : little endian architecture 
+     SLJIT_BIG_ENDIAN : big endian architecture 
+     SLJIT_UNALIGNED : allows unaligned memory accesses for non-fpu operations (only!) 
+     SLJIT_INDIRECT_CALL : see SLJIT_FUNC_OFFSET() for more information 
+ 
+   Constants: 
+     SLJIT_NUMBER_OF_REGISTERS : number of available registers 
+     SLJIT_NUMBER_OF_SCRATCH_REGISTERS : number of available scratch registers 
+     SLJIT_NUMBER_OF_SAVED_REGISTERS : number of available saved registers 
+     SLJIT_NUMBER_OF_FLOAT_REGISTERS : number of available floating point registers 
+     SLJIT_NUMBER_OF_SCRATCH_FLOAT_REGISTERS : number of available floating point scratch registers 
+     SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS : number of available floating point saved registers 
+     SLJIT_WORD_SHIFT : the shift required to apply when accessing a sljit_sw/sljit_uw array by index 
+     SLJIT_F32_SHIFT : the shift required to apply when accessing 
+                       a single precision floating point array by index 
+     SLJIT_F64_SHIFT : the shift required to apply when accessing 
+                       a double precision floating point array by index 
+     SLJIT_PREF_SHIFT_REG : x86 systems prefers ecx for shifting by register 
+                            the scratch register index of ecx is stored in this variable 
+     SLJIT_LOCALS_OFFSET : local space starting offset (SLJIT_SP + SLJIT_LOCALS_OFFSET) 
+     SLJIT_RETURN_ADDRESS_OFFSET : a return instruction always adds this offset to the return address 
+ 
+   Other macros: 
+     SLJIT_FUNC : calling convention attribute for both calling JIT from C and C calling back from JIT 
+     SLJIT_W(number) : defining 64 bit constants on 64 bit architectures (compiler independent helper) 
+*/ 
+ 
+/*****************/ 
+/* Sanity check. */ 
+/*****************/ 
+ 
+#if !((defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \ 
+	|| (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \ 
+	|| (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) \ 
+	|| (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \ 
+	|| (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) \ 
+	|| (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \ 
+	|| (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \ 
+	|| (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) \ 
+	|| (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) \ 
+	|| (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) \ 
+	|| (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) \ 
+	|| (defined SLJIT_CONFIG_TILEGX && SLJIT_CONFIG_TILEGX) \ 
+	|| (defined SLJIT_CONFIG_AUTO && SLJIT_CONFIG_AUTO) \ 
+	|| (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED)) 
+#error "An architecture must be selected" 
+#endif 
+ 
+#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \ 
+	+ (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \ 
+	+ (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) \ 
+	+ (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \ 
+	+ (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) \ 
+	+ (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \ 
+	+ (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \ 
+	+ (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) \ 
+	+ (defined SLJIT_CONFIG_TILEGX && SLJIT_CONFIG_TILEGX) \ 
+	+ (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) \ 
+	+ (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) \ 
+	+ (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) \ 
+	+ (defined SLJIT_CONFIG_AUTO && SLJIT_CONFIG_AUTO) \ 
+	+ (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED) >= 2 
+#error "Multiple architectures are selected" 
+#endif 
+ 
+/********************************************************/ 
+/* Automatic CPU detection (requires compiler support). */ 
+/********************************************************/ 
+ 
+#if (defined SLJIT_CONFIG_AUTO && SLJIT_CONFIG_AUTO) 
+ 
+#ifndef _WIN32 
+ 
+#if defined(__i386__) || defined(__i386) 
+#define SLJIT_CONFIG_X86_32 1 
+#elif defined(__x86_64__) 
+#define SLJIT_CONFIG_X86_64 1 
+#elif defined(__arm__) || defined(__ARM__) 
+#ifdef __thumb2__ 
+#define SLJIT_CONFIG_ARM_THUMB2 1 
+#elif defined(__ARM_ARCH_7__) || defined(__ARM_ARCH_7A__) || defined(__ARM_ARCH_7R__) 
+#define SLJIT_CONFIG_ARM_V7 1 
+#else 
+#define SLJIT_CONFIG_ARM_V5 1 
+#endif 
+#elif defined (__aarch64__) 
+#define SLJIT_CONFIG_ARM_64 1 
+#elif defined(__ppc64__) || defined(__powerpc64__) || defined(_ARCH_PPC64) || (defined(_POWER) && defined(__64BIT__)) 
+#define SLJIT_CONFIG_PPC_64 1 
+#elif defined(__ppc__) || defined(__powerpc__) || defined(_ARCH_PPC) || defined(_ARCH_PWR) || defined(_ARCH_PWR2) || defined(_POWER) 
+#define SLJIT_CONFIG_PPC_32 1 
+#elif defined(__mips__) && !defined(_LP64) 
+#define SLJIT_CONFIG_MIPS_32 1 
+#elif defined(__mips64) 
+#define SLJIT_CONFIG_MIPS_64 1 
+#elif defined(__sparc__) || defined(__sparc) 
+#define SLJIT_CONFIG_SPARC_32 1 
+#elif defined(__tilegx__) 
+#define SLJIT_CONFIG_TILEGX 1 
+#else 
+/* Unsupported architecture */ 
+#define SLJIT_CONFIG_UNSUPPORTED 1 
+#endif 
+ 
+#else /* _WIN32 */ 
+ 
+#if defined(_M_X64) || defined(__x86_64__) 
+#define SLJIT_CONFIG_X86_64 1 
+#elif (defined(_M_ARM) && _M_ARM >= 7 && defined(_M_ARMT)) || defined(__thumb2__) 
+#define SLJIT_CONFIG_ARM_THUMB2 1 
+#elif (defined(_M_ARM) && _M_ARM >= 7) 
+#define SLJIT_CONFIG_ARM_V7 1 
+#elif defined(_ARM_) 
+#define SLJIT_CONFIG_ARM_V5 1 
+#elif defined(_M_ARM64) || defined(__aarch64__) 
+#define SLJIT_CONFIG_ARM_64 1 
+#else 
+#define SLJIT_CONFIG_X86_32 1 
+#endif 
+ 
+#endif /* !_WIN32 */ 
+#endif /* SLJIT_CONFIG_AUTO */ 
+ 
+#if (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED) 
+#undef SLJIT_EXECUTABLE_ALLOCATOR 
+#endif 
+ 
+/******************************/ 
+/* CPU family type detection. */ 
+/******************************/ 
+ 
+#if (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \ 
+	|| (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) 
+#define SLJIT_CONFIG_ARM_32 1 
+#endif 
+ 
+#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) || (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) 
+#define SLJIT_CONFIG_X86 1 
+#elif (defined SLJIT_CONFIG_ARM_32 && SLJIT_CONFIG_ARM_32) || (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) 
+#define SLJIT_CONFIG_ARM 1 
+#elif (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) || (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) 
+#define SLJIT_CONFIG_PPC 1 
+#elif (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) || (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) 
+#define SLJIT_CONFIG_MIPS 1 
+#elif (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) || (defined SLJIT_CONFIG_SPARC_64 && SLJIT_CONFIG_SPARC_64) 
+#define SLJIT_CONFIG_SPARC 1 
+#endif 
+ 
+/**********************************/ 
+/* External function definitions. */ 
+/**********************************/ 
+ 
+/* General macros: 
+   Note: SLJIT is designed to be independent from them as possible. 
+ 
+   In release mode (SLJIT_DEBUG is not defined) only the following 
+   external functions are needed: 
+*/ 
+ 
+#ifndef SLJIT_MALLOC 
+#define SLJIT_MALLOC(size, allocator_data) malloc(size) 
+#endif 
+ 
+#ifndef SLJIT_FREE 
+#define SLJIT_FREE(ptr, allocator_data) free(ptr) 
+#endif 
+ 
+#ifndef SLJIT_MEMCPY 
+#define SLJIT_MEMCPY(dest, src, len) memcpy(dest, src, len) 
+#endif 
+ 
+#ifndef SLJIT_MEMMOVE 
+#define SLJIT_MEMMOVE(dest, src, len) memmove(dest, src, len) 
+#endif 
+ 
+#ifndef SLJIT_ZEROMEM 
+#define SLJIT_ZEROMEM(dest, len) memset(dest, 0, len) 
+#endif 
+ 
+/***************************/ 
+/* Compiler helper macros. */ 
+/***************************/ 
+ 
+#if !defined(SLJIT_LIKELY) && !defined(SLJIT_UNLIKELY) 
+ 
+#if defined(__GNUC__) && (__GNUC__ >= 3) 
+#define SLJIT_LIKELY(x)		__builtin_expect((x), 1) 
+#define SLJIT_UNLIKELY(x)	__builtin_expect((x), 0) 
+#else 
+#define SLJIT_LIKELY(x)		(x) 
+#define SLJIT_UNLIKELY(x)	(x) 
+#endif 
+ 
+#endif /* !defined(SLJIT_LIKELY) && !defined(SLJIT_UNLIKELY) */ 
+ 
+#ifndef SLJIT_INLINE 
+/* Inline functions. Some old compilers do not support them. */ 
+#if defined(__SUNPRO_C) && __SUNPRO_C <= 0x510 
+#define SLJIT_INLINE 
+#else 
+#define SLJIT_INLINE __inline 
+#endif 
+#endif /* !SLJIT_INLINE */ 
+ 
+#ifndef SLJIT_NOINLINE 
+/* Not inline functions. */ 
+#if defined(__GNUC__) 
+#define SLJIT_NOINLINE __attribute__ ((noinline)) 
+#else 
+#define SLJIT_NOINLINE 
+#endif 
+#endif /* !SLJIT_INLINE */ 
+ 
+#ifndef SLJIT_UNUSED_ARG 
+/* Unused arguments. */ 
+#define SLJIT_UNUSED_ARG(arg) (void)arg 
+#endif 
+ 
+/*********************************/ 
+/* Type of public API functions. */ 
+/*********************************/ 
+ 
+#if (defined SLJIT_CONFIG_STATIC && SLJIT_CONFIG_STATIC) 
+/* Static ABI functions. For all-in-one programs. */ 
+ 
+#if defined(__GNUC__) 
+/* Disable unused warnings in gcc. */ 
+#define SLJIT_API_FUNC_ATTRIBUTE static __attribute__((unused)) 
+#else 
+#define SLJIT_API_FUNC_ATTRIBUTE static 
+#endif 
+ 
+#else 
+#define SLJIT_API_FUNC_ATTRIBUTE 
+#endif /* (defined SLJIT_CONFIG_STATIC && SLJIT_CONFIG_STATIC) */ 
+ 
+/****************************/ 
+/* Instruction cache flush. */ 
+/****************************/ 
+ 
+#if (!defined SLJIT_CACHE_FLUSH && defined __has_builtin) 
+#if __has_builtin(__builtin___clear_cache) 
+ 
+#define SLJIT_CACHE_FLUSH(from, to) \ 
+	__builtin___clear_cache((char*)from, (char*)to) 
+ 
+#endif /* __has_builtin(__builtin___clear_cache) */ 
+#endif /* (!defined SLJIT_CACHE_FLUSH && defined __has_builtin) */ 
+ 
+#ifndef SLJIT_CACHE_FLUSH 
+ 
+#if (defined SLJIT_CONFIG_X86 && SLJIT_CONFIG_X86) 
+ 
+/* Not required to implement on archs with unified caches. */ 
+#define SLJIT_CACHE_FLUSH(from, to) 
+ 
+#elif defined __APPLE__ 
+ 
+/* Supported by all macs since Mac OS 10.5. 
+   However, it does not work on non-jailbroken iOS devices, 
+   although the compilation is successful. */ 
+ 
+#define SLJIT_CACHE_FLUSH(from, to) \ 
+	sys_icache_invalidate((char*)(from), (char*)(to) - (char*)(from)) 
+ 
+#elif (defined SLJIT_CONFIG_PPC && SLJIT_CONFIG_PPC) 
+ 
+/* The __clear_cache() implementation of GCC is a dummy function on PowerPC. */ 
+#define SLJIT_CACHE_FLUSH(from, to) \ 
+	ppc_cache_flush((from), (to)) 
+#define SLJIT_CACHE_FLUSH_OWN_IMPL 1 
+ 
+#elif (defined(__GNUC__) && (__GNUC__ >= 5 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 3))) 
+ 
+#define SLJIT_CACHE_FLUSH(from, to) \ 
+	__builtin___clear_cache((char*)from, (char*)to) 
+ 
+#elif defined __ANDROID__ 
+ 
+/* Android lacks __clear_cache; instead, cacheflush should be used. */ 
+ 
+#define SLJIT_CACHE_FLUSH(from, to) \ 
+    cacheflush((long)(from), (long)(to), 0) 
+ 
+#elif (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) 
+ 
+/* The __clear_cache() implementation of GCC is a dummy function on Sparc. */ 
+#define SLJIT_CACHE_FLUSH(from, to) \ 
+	sparc_cache_flush((from), (to)) 
+#define SLJIT_CACHE_FLUSH_OWN_IMPL 1 
+ 
+#elif defined _WIN32 
+ 
+#define SLJIT_CACHE_FLUSH(from, to) \ 
+	FlushInstructionCache(GetCurrentProcess(), (char*)(from), (char*)(to) - (char*)(from)) 
+ 
+#else 
+ 
+/* Calls __ARM_NR_cacheflush on ARM-Linux. */ 
+#define SLJIT_CACHE_FLUSH(from, to) \ 
+	__clear_cache((char*)(from), (char*)(to)) 
+ 
+#endif 
+ 
+#endif /* !SLJIT_CACHE_FLUSH */ 
+ 
+/******************************************************/ 
+/*    Integer and floating point type definitions.    */ 
+/******************************************************/ 
+ 
+/* 8 bit byte type. */ 
+typedef unsigned char sljit_u8; 
+typedef signed char sljit_s8; 
+ 
+/* 16 bit half-word type. */ 
+typedef unsigned short int sljit_u16; 
+typedef signed short int sljit_s16; 
+ 
+/* 32 bit integer type. */ 
+typedef unsigned int sljit_u32; 
+typedef signed int sljit_s32; 
+ 
+/* Machine word type. Enough for storing a pointer. 
+     32 bit for 32 bit machines. 
+     64 bit for 64 bit machines. */ 
+#if (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED) 
+/* Just to have something. */ 
+#define SLJIT_WORD_SHIFT 0 
+typedef unsigned long int sljit_uw; 
+typedef long int sljit_sw; 
+#elif !(defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \ 
+	&& !(defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \ 
+	&& !(defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) \ 
+	&& !(defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) \ 
+	&& !(defined SLJIT_CONFIG_TILEGX && SLJIT_CONFIG_TILEGX) 
+#define SLJIT_32BIT_ARCHITECTURE 1 
+#define SLJIT_WORD_SHIFT 2 
+typedef unsigned int sljit_uw; 
+typedef int sljit_sw; 
+#else 
+#define SLJIT_64BIT_ARCHITECTURE 1 
+#define SLJIT_WORD_SHIFT 3 
+#ifdef _WIN32 
+#ifdef __GNUC__ 
+/* These types do not require windows.h */ 
+typedef unsigned long long sljit_uw; 
+typedef long long sljit_sw; 
+#else 
+typedef unsigned __int64 sljit_uw; 
+typedef __int64 sljit_sw; 
+#endif 
+#else /* !_WIN32 */ 
+typedef unsigned long int sljit_uw; 
+typedef long int sljit_sw; 
+#endif /* _WIN32 */ 
+#endif 
+ 
+typedef sljit_uw sljit_p; 
+ 
+/* Floating point types. */ 
+typedef float sljit_f32; 
+typedef double sljit_f64; 
+ 
+/* Shift for pointer sized data. */ 
+#define SLJIT_POINTER_SHIFT SLJIT_WORD_SHIFT 
+ 
+/* Shift for double precision sized data. */ 
+#define SLJIT_F32_SHIFT 2 
+#define SLJIT_F64_SHIFT 3 
+ 
+#ifndef SLJIT_W 
+ 
+/* Defining long constants. */ 
+#if (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED) 
+#define SLJIT_W(w)	(w##l) 
+#elif (defined SLJIT_64BIT_ARCHITECTURE && SLJIT_64BIT_ARCHITECTURE) 
+#define SLJIT_W(w)	(w##ll) 
+#else 
+#define SLJIT_W(w)	(w) 
+#endif 
+ 
+#endif /* !SLJIT_W */ 
+ 
+/*************************/ 
+/* Endianness detection. */ 
+/*************************/ 
+ 
+#if !defined(SLJIT_BIG_ENDIAN) && !defined(SLJIT_LITTLE_ENDIAN) 
+ 
+/* These macros are mostly useful for the applications. */ 
+#if (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \ 
+	|| (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) 
+ 
+#ifdef __LITTLE_ENDIAN__ 
+#define SLJIT_LITTLE_ENDIAN 1 
+#else 
+#define SLJIT_BIG_ENDIAN 1 
+#endif 
+ 
+#elif (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) \ 
+	|| (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) 
+ 
+#ifdef __MIPSEL__ 
+#define SLJIT_LITTLE_ENDIAN 1 
+#else 
+#define SLJIT_BIG_ENDIAN 1 
+#endif 
+ 
+#elif (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) 
+ 
+#define SLJIT_BIG_ENDIAN 1 
+ 
+#else 
+#define SLJIT_LITTLE_ENDIAN 1 
+#endif 
+ 
+#endif /* !defined(SLJIT_BIG_ENDIAN) && !defined(SLJIT_LITTLE_ENDIAN) */ 
+ 
+/* Sanity check. */ 
+#if (defined SLJIT_BIG_ENDIAN && SLJIT_BIG_ENDIAN) && (defined SLJIT_LITTLE_ENDIAN && SLJIT_LITTLE_ENDIAN) 
+#error "Exactly one endianness must be selected" 
+#endif 
+ 
+#if !(defined SLJIT_BIG_ENDIAN && SLJIT_BIG_ENDIAN) && !(defined SLJIT_LITTLE_ENDIAN && SLJIT_LITTLE_ENDIAN) 
+#error "Exactly one endianness must be selected" 
+#endif 
+ 
+#ifndef SLJIT_UNALIGNED 
+ 
+#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \ 
+	|| (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \ 
+	|| (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \ 
+	|| (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) \ 
+	|| (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \ 
+	|| (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \ 
+	|| (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) 
+#define SLJIT_UNALIGNED 1 
+#endif 
+ 
+#endif /* !SLJIT_UNALIGNED */ 
+ 
+#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) 
+/* Auto detect SSE2 support using CPUID. 
+   On 64 bit x86 cpus, sse2 must be present. */ 
+#define SLJIT_DETECT_SSE2 1 
+#endif 
+ 
+/*****************************************************************************************/ 
+/* Calling convention of functions generated by SLJIT or called from the generated code. */ 
+/*****************************************************************************************/ 
+ 
+#ifndef SLJIT_FUNC 
+ 
+#if (defined SLJIT_USE_CDECL_CALLING_CONVENTION && SLJIT_USE_CDECL_CALLING_CONVENTION) 
+ 
+/* Force cdecl. */ 
+#define SLJIT_FUNC 
+ 
+#elif (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) 
+ 
+#if defined(__GNUC__) && !defined(__APPLE__) 
+ 
+#define SLJIT_FUNC __attribute__ ((fastcall)) 
+#define SLJIT_X86_32_FASTCALL 1 
+ 
+#elif defined(_MSC_VER) 
+ 
+#define SLJIT_FUNC __fastcall 
+#define SLJIT_X86_32_FASTCALL 1 
+ 
+#elif defined(__BORLANDC__) 
+ 
+#define SLJIT_FUNC __msfastcall 
+#define SLJIT_X86_32_FASTCALL 1 
+ 
+#else /* Unknown compiler. */ 
+ 
+/* The cdecl attribute is the default. */ 
+#define SLJIT_FUNC 
+ 
+#endif 
+ 
+#else /* Non x86-32 architectures. */ 
+ 
+#define SLJIT_FUNC 
+ 
+#endif /* SLJIT_CONFIG_X86_32 */ 
+ 
+#endif /* !SLJIT_FUNC */ 
+ 
+#ifndef SLJIT_INDIRECT_CALL 
+#if ((defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) && (!defined _CALL_ELF || _CALL_ELF == 1)) \ 
+	|| ((defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) && defined _AIX) 
+/* It seems certain ppc compilers use an indirect addressing for functions 
+   which makes things complicated. */ 
+#define SLJIT_INDIRECT_CALL 1 
+#endif 
+#endif /* SLJIT_INDIRECT_CALL */ 
+ 
+/* The offset which needs to be substracted from the return address to 
+determine the next executed instruction after return. */ 
+#ifndef SLJIT_RETURN_ADDRESS_OFFSET 
+#if (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) 
+#define SLJIT_RETURN_ADDRESS_OFFSET 8 
+#else 
+#define SLJIT_RETURN_ADDRESS_OFFSET 0 
+#endif 
+#endif /* SLJIT_RETURN_ADDRESS_OFFSET */ 
+ 
+/***************************************************/ 
+/* Functions of the built-in executable allocator. */ 
+/***************************************************/ 
+ 
+#if (defined SLJIT_EXECUTABLE_ALLOCATOR && SLJIT_EXECUTABLE_ALLOCATOR) 
+SLJIT_API_FUNC_ATTRIBUTE void* sljit_malloc_exec(sljit_uw size); 
+SLJIT_API_FUNC_ATTRIBUTE void sljit_free_exec(void* ptr); 
+SLJIT_API_FUNC_ATTRIBUTE void sljit_free_unused_memory_exec(void); 
+#define SLJIT_MALLOC_EXEC(size) sljit_malloc_exec(size) 
+#define SLJIT_FREE_EXEC(ptr) sljit_free_exec(ptr) 
+ 
+#if (defined SLJIT_PROT_EXECUTABLE_ALLOCATOR && SLJIT_PROT_EXECUTABLE_ALLOCATOR) 
+SLJIT_API_FUNC_ATTRIBUTE sljit_sw sljit_exec_offset(void* ptr); 
+#define SLJIT_EXEC_OFFSET(ptr) sljit_exec_offset(ptr) 
+#else 
+#define SLJIT_EXEC_OFFSET(ptr) 0 
+#endif 
+ 
+#endif 
+ 
+/**********************************************/ 
+/* Registers and locals offset determination. */ 
+/**********************************************/ 
+ 
+#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) 
+ 
+#define SLJIT_NUMBER_OF_REGISTERS 12 
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 9 
+#define SLJIT_LOCALS_OFFSET_BASE (compiler->locals_offset) 
+#define SLJIT_PREF_SHIFT_REG SLJIT_R2 
+ 
+#elif (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) 
+ 
+#define SLJIT_NUMBER_OF_REGISTERS 13 
+#ifndef _WIN64 
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 6 
+#define SLJIT_LOCALS_OFFSET_BASE 0 
+#else /* _WIN64 */ 
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 8 
+#define SLJIT_LOCALS_OFFSET_BASE (compiler->locals_offset) 
+#endif /* !_WIN64 */ 
+#define SLJIT_PREF_SHIFT_REG SLJIT_R3 
+ 
+#elif (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) 
+ 
+#define SLJIT_NUMBER_OF_REGISTERS 12 
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 8 
+#define SLJIT_LOCALS_OFFSET_BASE 0 
+ 
+#elif (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) 
+ 
+#define SLJIT_NUMBER_OF_REGISTERS 12 
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 8 
+#define SLJIT_LOCALS_OFFSET_BASE 0 
+ 
+#elif (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) 
+ 
+#define SLJIT_NUMBER_OF_REGISTERS 26 
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 10 
+#define SLJIT_LOCALS_OFFSET_BASE 0 
+ 
+#elif (defined SLJIT_CONFIG_PPC && SLJIT_CONFIG_PPC) 
+ 
+#define SLJIT_NUMBER_OF_REGISTERS 23 
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 17 
+#if (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) || (defined _AIX) 
+#define SLJIT_LOCALS_OFFSET_BASE ((6 + 8) * sizeof(sljit_sw)) 
+#elif (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) 
+/* Add +1 for double alignment. */ 
+#define SLJIT_LOCALS_OFFSET_BASE ((3 + 1) * sizeof(sljit_sw)) 
+#else 
+#define SLJIT_LOCALS_OFFSET_BASE (3 * sizeof(sljit_sw)) 
+#endif /* SLJIT_CONFIG_PPC_64 || _AIX */ 
+ 
+#elif (defined SLJIT_CONFIG_MIPS && SLJIT_CONFIG_MIPS) 
+ 
+#define SLJIT_NUMBER_OF_REGISTERS 21 
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 8 
+#if (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) 
+#define SLJIT_LOCALS_OFFSET_BASE (4 * sizeof(sljit_sw)) 
+#else 
+#define SLJIT_LOCALS_OFFSET_BASE 0 
+#endif 
+ 
+#elif (defined SLJIT_CONFIG_SPARC && SLJIT_CONFIG_SPARC) 
+ 
+#define SLJIT_NUMBER_OF_REGISTERS 18 
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 14 
+#if (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) 
+/* saved registers (16), return struct pointer (1), space for 6 argument words (1), 
+   4th double arg (2), double alignment (1). */ 
+#define SLJIT_LOCALS_OFFSET_BASE ((16 + 1 + 6 + 2 + 1) * sizeof(sljit_sw)) 
+#endif 
+ 
+#elif (defined SLJIT_CONFIG_TILEGX && SLJIT_CONFIG_TILEGX) 
+ 
+#define SLJIT_NUMBER_OF_REGISTERS 10 
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 5 
+#define SLJIT_LOCALS_OFFSET_BASE 0 
+ 
+#elif (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED) 
+ 
+#define SLJIT_NUMBER_OF_REGISTERS 0 
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 0 
+#define SLJIT_LOCALS_OFFSET_BASE 0 
+ 
+#endif 
+ 
+#define SLJIT_LOCALS_OFFSET (SLJIT_LOCALS_OFFSET_BASE) 
+ 
+#define SLJIT_NUMBER_OF_SCRATCH_REGISTERS \ 
+	(SLJIT_NUMBER_OF_REGISTERS - SLJIT_NUMBER_OF_SAVED_REGISTERS) 
+ 
+#define SLJIT_NUMBER_OF_FLOAT_REGISTERS 6 
+#if (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) && (defined _WIN64) 
+#define SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS 1 
+#else 
+#define SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS 0 
+#endif 
+ 
+#define SLJIT_NUMBER_OF_SCRATCH_FLOAT_REGISTERS \ 
+	(SLJIT_NUMBER_OF_FLOAT_REGISTERS - SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS) 
+ 
+/*************************************/ 
+/* Debug and verbose related macros. */ 
+/*************************************/ 
+ 
+#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) 
+#include <stdio.h> 
+#endif 
+ 
+#if (defined SLJIT_DEBUG && SLJIT_DEBUG) 
+ 
+#if !defined(SLJIT_ASSERT) || !defined(SLJIT_UNREACHABLE) 
+ 
+/* SLJIT_HALT_PROCESS must halt the process. */ 
+#ifndef SLJIT_HALT_PROCESS 
+#include <stdlib.h> 
+ 
+#define SLJIT_HALT_PROCESS() \ 
+	abort(); 
+#endif /* !SLJIT_HALT_PROCESS */ 
+ 
+#include <stdio.h> 
+ 
+#endif /* !SLJIT_ASSERT || !SLJIT_UNREACHABLE */ 
+ 
+/* Feel free to redefine these two macros. */ 
+#ifndef SLJIT_ASSERT 
+ 
+#define SLJIT_ASSERT(x) \ 
+	do { \ 
+		if (SLJIT_UNLIKELY(!(x))) { \ 
+			printf("Assertion failed at " __FILE__ ":%d\n", __LINE__); \ 
+			SLJIT_HALT_PROCESS(); \ 
+		} \ 
+	} while (0) 
+ 
+#endif /* !SLJIT_ASSERT */ 
+ 
+#ifndef SLJIT_UNREACHABLE 
+ 
+#define SLJIT_UNREACHABLE() \ 
+	do { \ 
+		printf("Should never been reached " __FILE__ ":%d\n", __LINE__); \ 
+		SLJIT_HALT_PROCESS(); \ 
+	} while (0) 
+ 
+#endif /* !SLJIT_UNREACHABLE */ 
+ 
+#else /* (defined SLJIT_DEBUG && SLJIT_DEBUG) */ 
+ 
+/* Forcing empty, but valid statements. */ 
+#undef SLJIT_ASSERT 
+#undef SLJIT_UNREACHABLE 
+ 
+#define SLJIT_ASSERT(x) \ 
+	do { } while (0) 
+#define SLJIT_UNREACHABLE() \ 
+	do { } while (0) 
+ 
+#endif /* (defined SLJIT_DEBUG && SLJIT_DEBUG) */ 
+ 
+#ifndef SLJIT_COMPILE_ASSERT 
+ 
+#define SLJIT_COMPILE_ASSERT(x, description) \ 
+	switch(0) { case 0: case ((x) ? 1 : 0): break; } 
+ 
+#endif /* !SLJIT_COMPILE_ASSERT */ 
+ 
+#endif