Restoring authorship annotation for Dmitry Potapov <potapov.d@gmail.com>. Commit 1 of 2.

1 files changed, 147 insertions, 147 deletions

diff --git a/contrib/libs/pcre/sljit/sljitConfig.h b/contrib/libs/pcre/sljit/sljitConfig.h
index d54b5e6f54..58fdd178f6 100644
--- a/contrib/libs/pcre/sljit/sljitConfig.h
+++ b/contrib/libs/pcre/sljit/sljitConfig.h
@@ -1,147 +1,147 @@
-/*
- *    Stack-less Just-In-Time compiler
- *
- *    Copyright Zoltan Herczeg (hzmester@freemail.hu). All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without modification, are
- * permitted provided that the following conditions are met:
- *
- *   1. Redistributions of source code must retain the above copyright notice, this list of
- *      conditions and the following disclaimer.
- *
- *   2. Redistributions in binary form must reproduce the above copyright notice, this list
- *      of conditions and the following disclaimer in the documentation and/or other materials
- *      provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) AND CONTRIBUTORS ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
- * SHALL THE COPYRIGHT HOLDER(S) OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
- * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _SLJIT_CONFIG_H_
-#define _SLJIT_CONFIG_H_
-
-/* --------------------------------------------------------------------- */
-/*  Custom defines                                                       */
-/* --------------------------------------------------------------------- */
-
-/* Put your custom defines here. This empty section will never change
-   which helps maintaining patches (with diff / patch utilities). */
-
-/* --------------------------------------------------------------------- */
-/*  Architecture                                                         */
-/* --------------------------------------------------------------------- */
-
-/* Architecture selection. */
-/* #define SLJIT_CONFIG_X86_32 1 */
-/* #define SLJIT_CONFIG_X86_64 1 */
-/* #define SLJIT_CONFIG_ARM_V5 1 */
-/* #define SLJIT_CONFIG_ARM_V7 1 */
-/* #define SLJIT_CONFIG_ARM_THUMB2 1 */
-/* #define SLJIT_CONFIG_ARM_64 1 */
-/* #define SLJIT_CONFIG_PPC_32 1 */
-/* #define SLJIT_CONFIG_PPC_64 1 */
-/* #define SLJIT_CONFIG_MIPS_32 1 */
-/* #define SLJIT_CONFIG_MIPS_64 1 */
-/* #define SLJIT_CONFIG_SPARC_32 1 */
-/* #define SLJIT_CONFIG_TILEGX 1 */
-
-/* #define SLJIT_CONFIG_AUTO 1 */
-/* #define SLJIT_CONFIG_UNSUPPORTED 1 */
-
-/* --------------------------------------------------------------------- */
-/*  Utilities                                                            */
-/* --------------------------------------------------------------------- */
-
-/* Useful for thread-safe compiling of global functions. */
-#ifndef SLJIT_UTIL_GLOBAL_LOCK
-/* Enabled by default */
-#define SLJIT_UTIL_GLOBAL_LOCK 1
-#endif
-
-/* Implements a stack like data structure (by using mmap / VirtualAlloc). */
-#ifndef SLJIT_UTIL_STACK
-/* Enabled by default */
-#define SLJIT_UTIL_STACK 1
-#endif
-
-/* Single threaded application. Does not require any locks. */
-#ifndef SLJIT_SINGLE_THREADED
-/* Disabled by default. */
-#define SLJIT_SINGLE_THREADED 0
-#endif
-
-/* --------------------------------------------------------------------- */
-/*  Configuration                                                        */
-/* --------------------------------------------------------------------- */
-
-/* If SLJIT_STD_MACROS_DEFINED is not defined, the application should
-   define SLJIT_MALLOC, SLJIT_FREE, SLJIT_MEMCPY, and NULL. */
-#ifndef SLJIT_STD_MACROS_DEFINED
-/* Disabled by default. */
-#define SLJIT_STD_MACROS_DEFINED 0
-#endif
-
-/* Executable code allocation:
-   If SLJIT_EXECUTABLE_ALLOCATOR is not defined, the application should
-   define SLJIT_MALLOC_EXEC, SLJIT_FREE_EXEC, and SLJIT_EXEC_OFFSET. */
-#ifndef SLJIT_EXECUTABLE_ALLOCATOR
-/* Enabled by default. */
-#define SLJIT_EXECUTABLE_ALLOCATOR 1
-
-/* When SLJIT_PROT_EXECUTABLE_ALLOCATOR is enabled SLJIT uses
-   an allocator which does not set writable and executable
-   permission flags at the same time. The trade-of is increased
-   memory consumption and disabled dynamic code modifications. */
-#ifndef SLJIT_PROT_EXECUTABLE_ALLOCATOR
-/* Disabled by default. */
-#define SLJIT_PROT_EXECUTABLE_ALLOCATOR 0
-#endif
-
-#endif
-
-/* Force cdecl calling convention even if a better calling
-   convention (e.g. fastcall) is supported by the C compiler.
-   If this option is disabled (this is the default), functions
-   called from JIT should be defined with SLJIT_FUNC attribute.
-   Standard C functions can still be called by using the
-   SLJIT_CALL_CDECL jump type. */
-#ifndef SLJIT_USE_CDECL_CALLING_CONVENTION
-/* Disabled by default */
-#define SLJIT_USE_CDECL_CALLING_CONVENTION 0
-#endif
-
-/* Return with error when an invalid argument is passed. */
-#ifndef SLJIT_ARGUMENT_CHECKS
-/* Disabled by default */
-#define SLJIT_ARGUMENT_CHECKS 0
-#endif
-
-/* Debug checks (assertions, etc.). */
-#ifndef SLJIT_DEBUG
-/* Enabled by default */
-#define SLJIT_DEBUG 1
-#endif
-
-/* Verbose operations. */
-#ifndef SLJIT_VERBOSE
-/* Enabled by default */
-#define SLJIT_VERBOSE 1
-#endif
-
-/*
-  SLJIT_IS_FPU_AVAILABLE
-    The availability of the FPU can be controlled by SLJIT_IS_FPU_AVAILABLE.
-      zero value - FPU is NOT present.
-      nonzero value - FPU is present.
-*/
-
-/* For further configurations, see the beginning of sljitConfigInternal.h */
-
-#endif
+/* 
+ *    Stack-less Just-In-Time compiler 
+ * 
+ *    Copyright Zoltan Herczeg (hzmester@freemail.hu). All rights reserved. 
+ * 
+ * Redistribution and use in source and binary forms, with or without modification, are 
+ * permitted provided that the following conditions are met: 
+ * 
+ *   1. Redistributions of source code must retain the above copyright notice, this list of 
+ *      conditions and the following disclaimer. 
+ * 
+ *   2. Redistributions in binary form must reproduce the above copyright notice, this list 
+ *      of conditions and the following disclaimer in the documentation and/or other materials 
+ *      provided with the distribution. 
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) AND CONTRIBUTORS ``AS IS'' AND ANY 
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT 
+ * SHALL THE COPYRIGHT HOLDER(S) OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED 
+ * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR 
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN 
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 
+ */ 
+ 
+#ifndef _SLJIT_CONFIG_H_ 
+#define _SLJIT_CONFIG_H_ 
+ 
+/* --------------------------------------------------------------------- */ 
+/*  Custom defines                                                       */ 
+/* --------------------------------------------------------------------- */ 
+ 
+/* Put your custom defines here. This empty section will never change 
+   which helps maintaining patches (with diff / patch utilities). */ 
+ 
+/* --------------------------------------------------------------------- */ 
+/*  Architecture                                                         */ 
+/* --------------------------------------------------------------------- */ 
+ 
+/* Architecture selection. */ 
+/* #define SLJIT_CONFIG_X86_32 1 */ 
+/* #define SLJIT_CONFIG_X86_64 1 */ 
+/* #define SLJIT_CONFIG_ARM_V5 1 */ 
+/* #define SLJIT_CONFIG_ARM_V7 1 */ 
+/* #define SLJIT_CONFIG_ARM_THUMB2 1 */ 
+/* #define SLJIT_CONFIG_ARM_64 1 */ 
+/* #define SLJIT_CONFIG_PPC_32 1 */ 
+/* #define SLJIT_CONFIG_PPC_64 1 */ 
+/* #define SLJIT_CONFIG_MIPS_32 1 */ 
+/* #define SLJIT_CONFIG_MIPS_64 1 */ 
+/* #define SLJIT_CONFIG_SPARC_32 1 */ 
+/* #define SLJIT_CONFIG_TILEGX 1 */ 
+ 
+/* #define SLJIT_CONFIG_AUTO 1 */ 
+/* #define SLJIT_CONFIG_UNSUPPORTED 1 */ 
+ 
+/* --------------------------------------------------------------------- */ 
+/*  Utilities                                                            */ 
+/* --------------------------------------------------------------------- */ 
+ 
+/* Useful for thread-safe compiling of global functions. */ 
+#ifndef SLJIT_UTIL_GLOBAL_LOCK 
+/* Enabled by default */ 
+#define SLJIT_UTIL_GLOBAL_LOCK 1 
+#endif 
+ 
+/* Implements a stack like data structure (by using mmap / VirtualAlloc). */ 
+#ifndef SLJIT_UTIL_STACK 
+/* Enabled by default */ 
+#define SLJIT_UTIL_STACK 1 
+#endif 
+ 
+/* Single threaded application. Does not require any locks. */ 
+#ifndef SLJIT_SINGLE_THREADED 
+/* Disabled by default. */ 
+#define SLJIT_SINGLE_THREADED 0 
+#endif 
+ 
+/* --------------------------------------------------------------------- */ 
+/*  Configuration                                                        */ 
+/* --------------------------------------------------------------------- */ 
+ 
+/* If SLJIT_STD_MACROS_DEFINED is not defined, the application should 
+   define SLJIT_MALLOC, SLJIT_FREE, SLJIT_MEMCPY, and NULL. */ 
+#ifndef SLJIT_STD_MACROS_DEFINED 
+/* Disabled by default. */ 
+#define SLJIT_STD_MACROS_DEFINED 0 
+#endif 
+ 
+/* Executable code allocation: 
+   If SLJIT_EXECUTABLE_ALLOCATOR is not defined, the application should 
+   define SLJIT_MALLOC_EXEC, SLJIT_FREE_EXEC, and SLJIT_EXEC_OFFSET. */ 
+#ifndef SLJIT_EXECUTABLE_ALLOCATOR 
+/* Enabled by default. */ 
+#define SLJIT_EXECUTABLE_ALLOCATOR 1 
+ 
+/* When SLJIT_PROT_EXECUTABLE_ALLOCATOR is enabled SLJIT uses 
+   an allocator which does not set writable and executable 
+   permission flags at the same time. The trade-of is increased 
+   memory consumption and disabled dynamic code modifications. */ 
+#ifndef SLJIT_PROT_EXECUTABLE_ALLOCATOR 
+/* Disabled by default. */ 
+#define SLJIT_PROT_EXECUTABLE_ALLOCATOR 0 
+#endif 
+ 
+#endif 
+ 
+/* Force cdecl calling convention even if a better calling 
+   convention (e.g. fastcall) is supported by the C compiler. 
+   If this option is disabled (this is the default), functions 
+   called from JIT should be defined with SLJIT_FUNC attribute. 
+   Standard C functions can still be called by using the 
+   SLJIT_CALL_CDECL jump type. */ 
+#ifndef SLJIT_USE_CDECL_CALLING_CONVENTION 
+/* Disabled by default */ 
+#define SLJIT_USE_CDECL_CALLING_CONVENTION 0 
+#endif 
+ 
+/* Return with error when an invalid argument is passed. */ 
+#ifndef SLJIT_ARGUMENT_CHECKS 
+/* Disabled by default */ 
+#define SLJIT_ARGUMENT_CHECKS 0 
+#endif 
+ 
+/* Debug checks (assertions, etc.). */ 
+#ifndef SLJIT_DEBUG 
+/* Enabled by default */ 
+#define SLJIT_DEBUG 1 
+#endif 
+ 
+/* Verbose operations. */ 
+#ifndef SLJIT_VERBOSE 
+/* Enabled by default */ 
+#define SLJIT_VERBOSE 1 
+#endif 
+ 
+/* 
+  SLJIT_IS_FPU_AVAILABLE 
+    The availability of the FPU can be controlled by SLJIT_IS_FPU_AVAILABLE. 
+      zero value - FPU is NOT present. 
+      nonzero value - FPU is present. 
+*/ 
+ 
+/* For further configurations, see the beginning of sljitConfigInternal.h */ 
+ 
+#endif