Restoring authorship annotation for <orivej@yandex-team.ru>. Commit 1 of 2.

1 files changed, 174 insertions, 174 deletions

diff --git a/contrib/libs/linux-headers/linux/scc.h b/contrib/libs/linux-headers/linux/scc.h
index f0eb0dc322..3f3a1b46ac 100644
--- a/contrib/libs/linux-headers/linux/scc.h
+++ b/contrib/libs/linux-headers/linux/scc.h
@@ -1,174 +1,174 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-/* $Id: scc.h,v 1.29 1997/04/02 14:56:45 jreuter Exp jreuter $ */
-
-#ifndef _SCC_H
-#define _SCC_H
-
-#include <linux/sockios.h>
-
-/* selection of hardware types */
-
-#define PA0HZP		0x00	/* hardware type for PA0HZP SCC card and compatible */
-#define EAGLE		0x01    /* hardware type for EAGLE card */
-#define PC100		0x02	/* hardware type for PC100 card */
-#define PRIMUS		0x04	/* hardware type for PRIMUS-PC (DG9BL) card */
-#define DRSI		0x08	/* hardware type for DRSI PC*Packet card */
-#define BAYCOM		0x10	/* hardware type for BayCom (U)SCC */
-
-/* DEV ioctl() commands */
-
-enum SCC_ioctl_cmds {
-	SIOCSCCRESERVED = SIOCDEVPRIVATE,
-	SIOCSCCCFG,
-	SIOCSCCINI,
-	SIOCSCCCHANINI,
-	SIOCSCCSMEM,
-	SIOCSCCGKISS,
-	SIOCSCCSKISS,
-	SIOCSCCGSTAT,
-	SIOCSCCCAL
-};
-
-/* Device parameter control (from WAMPES) */
-
-enum L1_params {
-	PARAM_DATA,
-	PARAM_TXDELAY,
-	PARAM_PERSIST,
-	PARAM_SLOTTIME,
-	PARAM_TXTAIL,
-	PARAM_FULLDUP,
-	PARAM_SOFTDCD,		/* was: PARAM_HW */
-	PARAM_MUTE,		/* ??? */
-	PARAM_DTR,
-	PARAM_RTS,
-	PARAM_SPEED,
-	PARAM_ENDDELAY,		/* ??? */
-	PARAM_GROUP,
-	PARAM_IDLE,
-	PARAM_MIN,
-	PARAM_MAXKEY,
-	PARAM_WAIT,
-	PARAM_MAXDEFER,
-	PARAM_TX,
-	PARAM_HWEVENT = 31,
-	PARAM_RETURN = 255	/* reset kiss mode */
-};
-
-/* fulldup parameter */
-
-enum FULLDUP_modes {
-	KISS_DUPLEX_HALF,	/* normal CSMA operation */
-	KISS_DUPLEX_FULL,	/* fullduplex, key down trx after transmission */
-	KISS_DUPLEX_LINK,	/* fullduplex, key down trx after 'idletime' sec */
-	KISS_DUPLEX_OPTIMA	/* fullduplex, let the protocol layer control the hw */
-};
-
-/* misc. parameters */
-
-#define TIMER_OFF	65535U	/* to switch off timers */
-#define NO_SUCH_PARAM	65534U	/* param not implemented */
-
-/* HWEVENT parameter */
-
-enum HWEVENT_opts {
-	HWEV_DCD_ON,
-	HWEV_DCD_OFF,
-	HWEV_ALL_SENT
-};
-
-/* channel grouping */
-
-#define RXGROUP		0100	/* if set, only tx when all channels clear */
-#define TXGROUP		0200	/* if set, don't transmit simultaneously */
-
-/* Tx/Rx clock sources */
-
-enum CLOCK_sources {
-	CLK_DPLL,	/* normal halfduplex operation */
-	CLK_EXTERNAL,	/* external clocking (G3RUH/DF9IC modems) */
-	CLK_DIVIDER,	/* Rx = DPLL, Tx = divider (fullduplex with */
-			/* modems without clock regeneration */
-	CLK_BRG		/* experimental fullduplex mode with DPLL/BRG for */
-			/* MODEMs without clock recovery */
-};
-
-/* Tx state */
-
-enum TX_state {
-	TXS_IDLE,	/* Transmitter off, no data pending */
-	TXS_BUSY,	/* waiting for permission to send / tailtime */
-	TXS_ACTIVE,	/* Transmitter on, sending data */
-	TXS_NEWFRAME,	/* reset CRC and send (next) frame */
-	TXS_IDLE2,	/* Transmitter on, no data pending */
-	TXS_WAIT,	/* Waiting for Mintime to expire */
-	TXS_TIMEOUT	/* We had a transmission timeout */
-};
-
-typedef unsigned long io_port;	/* type definition for an 'io port address' */
-
-/* SCC statistical information */
-
-struct scc_stat {
-        long rxints;            /* Receiver interrupts */
-        long txints;            /* Transmitter interrupts */
-        long exints;            /* External/status interrupts */
-        long spints;            /* Special receiver interrupts */
-
-        long txframes;          /* Packets sent */
-        long rxframes;          /* Number of Frames Actually Received */
-        long rxerrs;            /* CRC Errors */
-        long txerrs;		/* KISS errors */
-        
-	unsigned int nospace;	/* "Out of buffers" */
-	unsigned int rx_over;	/* Receiver Overruns */
-	unsigned int tx_under;	/* Transmitter Underruns */
-
-	unsigned int tx_state;	/* Transmitter state */
-	int tx_queued;		/* tx frames enqueued */
-
-	unsigned int maxqueue;	/* allocated tx_buffers */
-	unsigned int bufsize;	/* used buffersize */
-};
-
-struct scc_modem {
-	long speed;		/* Line speed, bps */
-	char clocksrc;		/* 0 = DPLL, 1 = external, 2 = divider */
-	char nrz;		/* NRZ instead of NRZI */	
-};
-
-struct scc_kiss_cmd {
-	int  	 command;	/* one of the KISS-Commands defined above */
-	unsigned param;		/* KISS-Param */
-};
-
-struct scc_hw_config {
-	io_port data_a;		/* data port channel A */
-	io_port ctrl_a;		/* control port channel A */
-	io_port data_b;		/* data port channel B */
-	io_port ctrl_b;		/* control port channel B */
-	io_port vector_latch;	/* INTACK-Latch (#) */
-	io_port	special;	/* special function port */
-
-	int	irq;		/* irq */
-	long	clock;		/* clock */
-	char	option;		/* command for function port */
-
-	char brand;		/* hardware type */
-	char escc;		/* use ext. features of a 8580/85180/85280 */
-};
-
-/* (#) only one INTACK latch allowed. */
-
-
-struct scc_mem_config {
-	unsigned int dummy;
-	unsigned int bufsize;
-};
-
-struct scc_calibrate {
-	unsigned int time;
-	unsigned char pattern;
-};
-
-#endif /* _SCC_H */
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ 
+/* $Id: scc.h,v 1.29 1997/04/02 14:56:45 jreuter Exp jreuter $ */ 
+ 
+#ifndef _SCC_H 
+#define _SCC_H 
+ 
+#include <linux/sockios.h> 
+ 
+/* selection of hardware types */ 
+ 
+#define PA0HZP		0x00	/* hardware type for PA0HZP SCC card and compatible */ 
+#define EAGLE		0x01    /* hardware type for EAGLE card */ 
+#define PC100		0x02	/* hardware type for PC100 card */ 
+#define PRIMUS		0x04	/* hardware type for PRIMUS-PC (DG9BL) card */ 
+#define DRSI		0x08	/* hardware type for DRSI PC*Packet card */ 
+#define BAYCOM		0x10	/* hardware type for BayCom (U)SCC */ 
+ 
+/* DEV ioctl() commands */ 
+ 
+enum SCC_ioctl_cmds { 
+	SIOCSCCRESERVED = SIOCDEVPRIVATE, 
+	SIOCSCCCFG, 
+	SIOCSCCINI, 
+	SIOCSCCCHANINI, 
+	SIOCSCCSMEM, 
+	SIOCSCCGKISS, 
+	SIOCSCCSKISS, 
+	SIOCSCCGSTAT, 
+	SIOCSCCCAL 
+}; 
+ 
+/* Device parameter control (from WAMPES) */ 
+ 
+enum L1_params { 
+	PARAM_DATA, 
+	PARAM_TXDELAY, 
+	PARAM_PERSIST, 
+	PARAM_SLOTTIME, 
+	PARAM_TXTAIL, 
+	PARAM_FULLDUP, 
+	PARAM_SOFTDCD,		/* was: PARAM_HW */ 
+	PARAM_MUTE,		/* ??? */ 
+	PARAM_DTR, 
+	PARAM_RTS, 
+	PARAM_SPEED, 
+	PARAM_ENDDELAY,		/* ??? */ 
+	PARAM_GROUP, 
+	PARAM_IDLE, 
+	PARAM_MIN, 
+	PARAM_MAXKEY, 
+	PARAM_WAIT, 
+	PARAM_MAXDEFER, 
+	PARAM_TX, 
+	PARAM_HWEVENT = 31, 
+	PARAM_RETURN = 255	/* reset kiss mode */ 
+}; 
+ 
+/* fulldup parameter */ 
+ 
+enum FULLDUP_modes { 
+	KISS_DUPLEX_HALF,	/* normal CSMA operation */ 
+	KISS_DUPLEX_FULL,	/* fullduplex, key down trx after transmission */ 
+	KISS_DUPLEX_LINK,	/* fullduplex, key down trx after 'idletime' sec */ 
+	KISS_DUPLEX_OPTIMA	/* fullduplex, let the protocol layer control the hw */ 
+}; 
+ 
+/* misc. parameters */ 
+ 
+#define TIMER_OFF	65535U	/* to switch off timers */ 
+#define NO_SUCH_PARAM	65534U	/* param not implemented */ 
+ 
+/* HWEVENT parameter */ 
+ 
+enum HWEVENT_opts { 
+	HWEV_DCD_ON, 
+	HWEV_DCD_OFF, 
+	HWEV_ALL_SENT 
+}; 
+ 
+/* channel grouping */ 
+ 
+#define RXGROUP		0100	/* if set, only tx when all channels clear */ 
+#define TXGROUP		0200	/* if set, don't transmit simultaneously */ 
+ 
+/* Tx/Rx clock sources */ 
+ 
+enum CLOCK_sources { 
+	CLK_DPLL,	/* normal halfduplex operation */ 
+	CLK_EXTERNAL,	/* external clocking (G3RUH/DF9IC modems) */ 
+	CLK_DIVIDER,	/* Rx = DPLL, Tx = divider (fullduplex with */ 
+			/* modems without clock regeneration */ 
+	CLK_BRG		/* experimental fullduplex mode with DPLL/BRG for */ 
+			/* MODEMs without clock recovery */ 
+}; 
+ 
+/* Tx state */ 
+ 
+enum TX_state { 
+	TXS_IDLE,	/* Transmitter off, no data pending */ 
+	TXS_BUSY,	/* waiting for permission to send / tailtime */ 
+	TXS_ACTIVE,	/* Transmitter on, sending data */ 
+	TXS_NEWFRAME,	/* reset CRC and send (next) frame */ 
+	TXS_IDLE2,	/* Transmitter on, no data pending */ 
+	TXS_WAIT,	/* Waiting for Mintime to expire */ 
+	TXS_TIMEOUT	/* We had a transmission timeout */ 
+}; 
+ 
+typedef unsigned long io_port;	/* type definition for an 'io port address' */ 
+ 
+/* SCC statistical information */ 
+ 
+struct scc_stat { 
+        long rxints;            /* Receiver interrupts */ 
+        long txints;            /* Transmitter interrupts */ 
+        long exints;            /* External/status interrupts */ 
+        long spints;            /* Special receiver interrupts */ 
+ 
+        long txframes;          /* Packets sent */ 
+        long rxframes;          /* Number of Frames Actually Received */ 
+        long rxerrs;            /* CRC Errors */ 
+        long txerrs;		/* KISS errors */ 
+         
+	unsigned int nospace;	/* "Out of buffers" */ 
+	unsigned int rx_over;	/* Receiver Overruns */ 
+	unsigned int tx_under;	/* Transmitter Underruns */ 
+ 
+	unsigned int tx_state;	/* Transmitter state */ 
+	int tx_queued;		/* tx frames enqueued */ 
+ 
+	unsigned int maxqueue;	/* allocated tx_buffers */ 
+	unsigned int bufsize;	/* used buffersize */ 
+}; 
+ 
+struct scc_modem { 
+	long speed;		/* Line speed, bps */ 
+	char clocksrc;		/* 0 = DPLL, 1 = external, 2 = divider */ 
+	char nrz;		/* NRZ instead of NRZI */	 
+}; 
+ 
+struct scc_kiss_cmd { 
+	int  	 command;	/* one of the KISS-Commands defined above */ 
+	unsigned param;		/* KISS-Param */ 
+}; 
+ 
+struct scc_hw_config { 
+	io_port data_a;		/* data port channel A */ 
+	io_port ctrl_a;		/* control port channel A */ 
+	io_port data_b;		/* data port channel B */ 
+	io_port ctrl_b;		/* control port channel B */ 
+	io_port vector_latch;	/* INTACK-Latch (#) */ 
+	io_port	special;	/* special function port */ 
+ 
+	int	irq;		/* irq */ 
+	long	clock;		/* clock */ 
+	char	option;		/* command for function port */ 
+ 
+	char brand;		/* hardware type */ 
+	char escc;		/* use ext. features of a 8580/85180/85280 */ 
+}; 
+ 
+/* (#) only one INTACK latch allowed. */ 
+ 
+ 
+struct scc_mem_config { 
+	unsigned int dummy; 
+	unsigned int bufsize; 
+}; 
+ 
+struct scc_calibrate { 
+	unsigned int time; 
+	unsigned char pattern; 
+}; 
+ 
+#endif /* _SCC_H */