Restoring authorship annotation for <orivej@yandex-team.ru>. Commit 2 of 2.

1 files changed, 110 insertions, 110 deletions

diff --git a/contrib/libs/linux-headers/linux/lp.h b/contrib/libs/linux-headers/linux/lp.h
index 82de5d8bac6..b1214ab8689 100644
--- a/contrib/libs/linux-headers/linux/lp.h
+++ b/contrib/libs/linux-headers/linux/lp.h
@@ -1,111 +1,111 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ 
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * usr/include/linux/lp.h c.1991-1992 James Wiegand
+ * many modifications copyright (C) 1992 Michael K. Johnson
+ * Interrupt support added 1993 Nigel Gamble
+ * Removed 8255 status defines from inside __KERNEL__ Marcelo Tosatti 
+ */
+#ifndef _LINUX_LP_H
+#define _LINUX_LP_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+/*
+ * Per POSIX guidelines, this module reserves the LP and lp prefixes
+ * These are the lp_table[minor].flags flags...
+ */
+#define LP_EXIST 0x0001
+#define LP_SELEC 0x0002
+#define LP_BUSY	 0x0004
+#define LP_BUSY_BIT_POS 2
+#define LP_OFFL	 0x0008
+#define LP_NOPA  0x0010
+#define LP_ERR   0x0020
+#define LP_ABORT 0x0040
+#define LP_CAREFUL 0x0080 /* obsoleted -arca */
+#define LP_ABORTOPEN 0x0100
+
+#define LP_TRUST_IRQ_  0x0200 /* obsolete */
+#define LP_NO_REVERSE  0x0400 /* No reverse mode available. */
+#define LP_DATA_AVAIL  0x0800 /* Data is available. */
+
 /* 
- * usr/include/linux/lp.h c.1991-1992 James Wiegand 
- * many modifications copyright (C) 1992 Michael K. Johnson 
- * Interrupt support added 1993 Nigel Gamble 
- * Removed 8255 status defines from inside __KERNEL__ Marcelo Tosatti  
- */ 
-#ifndef _LINUX_LP_H 
-#define _LINUX_LP_H 
- 
-#include <linux/types.h> 
-#include <linux/ioctl.h> 
- 
-/* 
- * Per POSIX guidelines, this module reserves the LP and lp prefixes 
- * These are the lp_table[minor].flags flags... 
- */ 
-#define LP_EXIST 0x0001 
-#define LP_SELEC 0x0002 
-#define LP_BUSY	 0x0004 
-#define LP_BUSY_BIT_POS 2 
-#define LP_OFFL	 0x0008 
-#define LP_NOPA  0x0010 
-#define LP_ERR   0x0020 
-#define LP_ABORT 0x0040 
-#define LP_CAREFUL 0x0080 /* obsoleted -arca */ 
-#define LP_ABORTOPEN 0x0100 
- 
-#define LP_TRUST_IRQ_  0x0200 /* obsolete */ 
-#define LP_NO_REVERSE  0x0400 /* No reverse mode available. */ 
-#define LP_DATA_AVAIL  0x0800 /* Data is available. */ 
- 
-/*  
- * bit defines for 8255 status port 
- * base + 1 
- * accessed with LP_S(minor), which gets the byte... 
- */ 
-#define LP_PBUSY	0x80  /* inverted input, active high */ 
-#define LP_PACK		0x40  /* unchanged input, active low */ 
-#define LP_POUTPA	0x20  /* unchanged input, active high */ 
-#define LP_PSELECD	0x10  /* unchanged input, active high */ 
-#define LP_PERRORP	0x08  /* unchanged input, active low */ 
- 
-/* timeout for each character.  This is relative to bus cycles -- it 
- * is the count in a busy loop.  THIS IS THE VALUE TO CHANGE if you 
- * have extremely slow printing, or if the machine seems to slow down 
- * a lot when you print.  If you have slow printing, increase this 
- * number and recompile, and if your system gets bogged down, decrease 
- * this number.  This can be changed with the tunelp(8) command as well. 
- */ 
- 
-#define LP_INIT_CHAR 1000 
- 
-/* The parallel port specs apparently say that there needs to be 
- * a .5usec wait before and after the strobe. 
- */ 
- 
-#define LP_INIT_WAIT 1 
- 
-/* This is the amount of time that the driver waits for the printer to 
- * catch up when the printer's buffer appears to be filled.  If you 
- * want to tune this and have a fast printer (i.e. HPIIIP), decrease 
- * this number, and if you have a slow printer, increase this number. 
- * This is in hundredths of a second, the default 2 being .05 second. 
- * Or use the tunelp(8) command, which is especially nice if you want 
- * change back and forth between character and graphics printing, which 
- * are wildly different... 
- */ 
- 
-#define LP_INIT_TIME 2 
- 
-/* IOCTL numbers */ 
-#define LPCHAR   0x0601  /* corresponds to LP_INIT_CHAR */ 
-#define LPTIME   0x0602  /* corresponds to LP_INIT_TIME */ 
-#define LPABORT  0x0604  /* call with TRUE arg to abort on error, 
-			    FALSE to retry.  Default is retry.  */ 
-#define LPSETIRQ 0x0605  /* call with new IRQ number, 
-			    or 0 for polling (no IRQ) */ 
-#define LPGETIRQ 0x0606  /* get the current IRQ number */ 
-#define LPWAIT   0x0608  /* corresponds to LP_INIT_WAIT */ 
-/* NOTE: LPCAREFUL is obsoleted and it' s always the default right now -arca */ 
-#define LPCAREFUL   0x0609  /* call with TRUE arg to require out-of-paper, off- 
-			    line, and error indicators good on all writes, 
-			    FALSE to ignore them.  Default is ignore. */ 
-#define LPABORTOPEN 0x060a  /* call with TRUE arg to abort open() on error, 
-			    FALSE to ignore error.  Default is ignore.  */ 
-#define LPGETSTATUS 0x060b  /* return LP_S(minor) */ 
-#define LPRESET     0x060c  /* reset printer */ 
-#ifdef LP_STATS 
-#define LPGETSTATS  0x060d  /* get statistics (struct lp_stats) */ 
-#endif 
-#define LPGETFLAGS  0x060e  /* get status flags */ 
-#define LPSETTIMEOUT_OLD 0x060f /* set parport timeout */ 
-#define LPSETTIMEOUT_NEW \ 
-	_IOW(0x6, 0xf, __s64[2]) /* set parport timeout */ 
-#if __BITS_PER_LONG == 64 
-#define LPSETTIMEOUT LPSETTIMEOUT_OLD 
-#else 
-#define LPSETTIMEOUT (sizeof(time_t) > sizeof(__kernel_long_t) ? \ 
-	LPSETTIMEOUT_NEW : LPSETTIMEOUT_OLD) 
-#endif 
- 
-/* timeout for printk'ing a timeout, in jiffies (100ths of a second). 
-   This is also used for re-checking error conditions if LP_ABORT is 
-   not set.  This is the default behavior. */ 
- 
-#define LP_TIMEOUT_INTERRUPT	(60 * HZ) 
-#define LP_TIMEOUT_POLLED	(10 * HZ) 
- 
- 
-#endif /* _LINUX_LP_H */ 
+ * bit defines for 8255 status port
+ * base + 1
+ * accessed with LP_S(minor), which gets the byte...
+ */
+#define LP_PBUSY	0x80  /* inverted input, active high */
+#define LP_PACK		0x40  /* unchanged input, active low */
+#define LP_POUTPA	0x20  /* unchanged input, active high */
+#define LP_PSELECD	0x10  /* unchanged input, active high */
+#define LP_PERRORP	0x08  /* unchanged input, active low */
+
+/* timeout for each character.  This is relative to bus cycles -- it
+ * is the count in a busy loop.  THIS IS THE VALUE TO CHANGE if you
+ * have extremely slow printing, or if the machine seems to slow down
+ * a lot when you print.  If you have slow printing, increase this
+ * number and recompile, and if your system gets bogged down, decrease
+ * this number.  This can be changed with the tunelp(8) command as well.
+ */
+
+#define LP_INIT_CHAR 1000
+
+/* The parallel port specs apparently say that there needs to be
+ * a .5usec wait before and after the strobe.
+ */
+
+#define LP_INIT_WAIT 1
+
+/* This is the amount of time that the driver waits for the printer to
+ * catch up when the printer's buffer appears to be filled.  If you
+ * want to tune this and have a fast printer (i.e. HPIIIP), decrease
+ * this number, and if you have a slow printer, increase this number.
+ * This is in hundredths of a second, the default 2 being .05 second.
+ * Or use the tunelp(8) command, which is especially nice if you want
+ * change back and forth between character and graphics printing, which
+ * are wildly different...
+ */
+
+#define LP_INIT_TIME 2
+
+/* IOCTL numbers */
+#define LPCHAR   0x0601  /* corresponds to LP_INIT_CHAR */
+#define LPTIME   0x0602  /* corresponds to LP_INIT_TIME */
+#define LPABORT  0x0604  /* call with TRUE arg to abort on error,
+			    FALSE to retry.  Default is retry.  */
+#define LPSETIRQ 0x0605  /* call with new IRQ number,
+			    or 0 for polling (no IRQ) */
+#define LPGETIRQ 0x0606  /* get the current IRQ number */
+#define LPWAIT   0x0608  /* corresponds to LP_INIT_WAIT */
+/* NOTE: LPCAREFUL is obsoleted and it' s always the default right now -arca */
+#define LPCAREFUL   0x0609  /* call with TRUE arg to require out-of-paper, off-
+			    line, and error indicators good on all writes,
+			    FALSE to ignore them.  Default is ignore. */
+#define LPABORTOPEN 0x060a  /* call with TRUE arg to abort open() on error,
+			    FALSE to ignore error.  Default is ignore.  */
+#define LPGETSTATUS 0x060b  /* return LP_S(minor) */
+#define LPRESET     0x060c  /* reset printer */
+#ifdef LP_STATS
+#define LPGETSTATS  0x060d  /* get statistics (struct lp_stats) */
+#endif
+#define LPGETFLAGS  0x060e  /* get status flags */
+#define LPSETTIMEOUT_OLD 0x060f /* set parport timeout */
+#define LPSETTIMEOUT_NEW \
+	_IOW(0x6, 0xf, __s64[2]) /* set parport timeout */
+#if __BITS_PER_LONG == 64
+#define LPSETTIMEOUT LPSETTIMEOUT_OLD
+#else
+#define LPSETTIMEOUT (sizeof(time_t) > sizeof(__kernel_long_t) ? \
+	LPSETTIMEOUT_NEW : LPSETTIMEOUT_OLD)
+#endif
+
+/* timeout for printk'ing a timeout, in jiffies (100ths of a second).
+   This is also used for re-checking error conditions if LP_ABORT is
+   not set.  This is the default behavior. */
+
+#define LP_TIMEOUT_INTERRUPT	(60 * HZ)
+#define LP_TIMEOUT_POLLED	(10 * HZ)
+
+
+#endif /* _LINUX_LP_H */