YQL-13710 try to switch to new shiny PG

ref:2bed0445c8e8bd6c575883632adf19445f0a72a7

1 files changed, 414 insertions, 0 deletions

diff --git a/contrib/libs/icu/i18n/regeximp.h b/contrib/libs/icu/i18n/regeximp.h
new file mode 100644
index 0000000000..590d216895
--- /dev/null
+++ b/contrib/libs/icu/i18n/regeximp.h
@@ -0,0 +1,414 @@
+// © 2016 and later: Unicode, Inc. and others.
+// License & terms of use: http://www.unicode.org/copyright.html
+//
+//   Copyright (C) 2002-2015 International Business Machines Corporation
+//   and others. All rights reserved.
+//
+//   file:  regeximp.h
+//
+//           ICU Regular Expressions,
+//               Definitions of constant values used in the compiled form of
+//               a regular expression pattern.
+//
+
+#ifndef _REGEXIMP_H
+#define _REGEXIMP_H
+
+#include "unicode/utypes.h"
+#include "unicode/uobject.h"
+#include "unicode/uniset.h"
+#include "unicode/utext.h"
+
+#include "cmemory.h"
+#include "ucase.h"
+
+U_NAMESPACE_BEGIN
+
+// For debugging, define REGEX_DEBUG
+// To define with configure,
+//   CPPFLAGS="-DREGEX_DEBUG" ./runConfigureICU --enable-debug --disable-release Linux 
+
+#ifdef REGEX_DEBUG
+//
+//  debugging options.  Enable one or more of the three #defines immediately following
+//
+
+//#define REGEX_SCAN_DEBUG
+#define REGEX_DUMP_DEBUG
+#define REGEX_RUN_DEBUG
+
+//  End of #defines inteded to be directly set.
+
+#include <stdio.h>
+#endif
+
+#ifdef REGEX_SCAN_DEBUG
+#define REGEX_SCAN_DEBUG_PRINTF(a) printf a
+#else
+#define REGEX_SCAN_DEBUG_PRINTF(a)
+#endif
+
+
+//
+//  Opcode types     In the compiled form of the regexp, these are the type, or opcodes,
+//                   of the entries.
+//
+enum {
+     URX_RESERVED_OP   = 0,    // For multi-operand ops, most non-first words.
+     URX_RESERVED_OP_N = 255,  // For multi-operand ops, negative operand values.
+     URX_BACKTRACK     = 1,    // Force a backtrack, as if a match test had failed.
+     URX_END           = 2,
+     URX_ONECHAR       = 3,    // Value field is the 21 bit unicode char to match
+     URX_STRING        = 4,    // Value field is index of string start
+     URX_STRING_LEN    = 5,    // Value field is string length (code units)
+     URX_STATE_SAVE    = 6,    // Value field is pattern position to push
+     URX_NOP           = 7,
+     URX_START_CAPTURE = 8,    // Value field is capture group number.
+     URX_END_CAPTURE   = 9,    // Value field is capture group number
+     URX_STATIC_SETREF = 10,   // Value field is index of set in array of sets.
+     URX_SETREF        = 11,   // Value field is index of set in array of sets.
+     URX_DOTANY        = 12,
+     URX_JMP           = 13,   // Value field is destination position in
+                                                    //   the pattern.
+     URX_FAIL          = 14,   // Stop match operation,  No match.
+
+     URX_JMP_SAV       = 15,   // Operand:  JMP destination location
+     URX_BACKSLASH_B   = 16,   // Value field:  0:  \b    1:  \B
+     URX_BACKSLASH_G   = 17,
+     URX_JMP_SAV_X     = 18,   // Conditional JMP_SAV,
+                               //    Used in (x)+, breaks loop on zero length match.
+                               //    Operand:  Jmp destination.
+     URX_BACKSLASH_X   = 19,
+     URX_BACKSLASH_Z   = 20,   // \z   Unconditional end of line.
+
+     URX_DOTANY_ALL    = 21,   // ., in the . matches any mode.
+     URX_BACKSLASH_D   = 22,   // Value field:  0:  \d    1:  \D
+     URX_CARET         = 23,   // Value field:  1:  multi-line mode.
+     URX_DOLLAR        = 24,  // Also for \Z
+
+     URX_CTR_INIT      = 25,   // Counter Inits for {Interval} loops.
+     URX_CTR_INIT_NG   = 26,   //   2 kinds, normal and non-greedy.
+                               //   These are 4 word opcodes.  See description.
+                               //    First Operand:  Data loc of counter variable
+                               //    2nd   Operand:  Pat loc of the URX_CTR_LOOPx
+                               //                    at the end of the loop.
+                               //    3rd   Operand:  Minimum count.
+                               //    4th   Operand:  Max count, -1 for unbounded.
+
+     URX_DOTANY_UNIX   = 27,   // '.' operator in UNIX_LINES mode, only \n marks end of line.
+
+     URX_CTR_LOOP      = 28,   // Loop Ops for {interval} loops.
+     URX_CTR_LOOP_NG   = 29,   //   Also in three flavors.
+                               //   Operand is loc of corresponding CTR_INIT.
+
+     URX_CARET_M_UNIX  = 30,   // '^' operator, test for start of line in multi-line
+                               //      plus UNIX_LINES mode.
+
+     URX_RELOC_OPRND   = 31,   // Operand value in multi-operand ops that refers
+                               //   back into compiled pattern code, and thus must
+                               //   be relocated when inserting/deleting ops in code.
+
+     URX_STO_SP        = 32,   // Store the stack ptr.  Operand is location within
+                               //   matcher data (not stack data) to store it.
+     URX_LD_SP         = 33,   // Load the stack pointer.  Operand is location
+                               //   to load from.
+     URX_BACKREF       = 34,   // Back Reference.  Parameter is the index of the
+                               //   capture group variables in the state stack frame.
+     URX_STO_INP_LOC   = 35,   // Store the input location.  Operand is location
+                               //   within the matcher stack frame.
+     URX_JMPX          = 36,  // Conditional JMP.
+                               //   First Operand:  JMP target location.
+                               //   Second Operand:  Data location containing an
+                               //     input position.  If current input position ==
+                               //     saved input position, FAIL rather than taking
+                               //     the JMP
+     URX_LA_START      = 37,   // Starting a LookAround expression.
+                               //   Save InputPos, SP and active region in static data.
+                               //   Operand:  Static data offset for the save
+     URX_LA_END        = 38,   // Ending a Lookaround expression.
+                               //   Restore InputPos and Stack to saved values.
+                               //   Operand:  Static data offset for saved data.
+     URX_ONECHAR_I     = 39,   // Test for case-insensitive match of a literal character.
+                               //   Operand:  the literal char.
+     URX_STRING_I      = 40,   // Case insensitive string compare.
+                               //   First Operand:  Index of start of string in string literals
+                               //   Second Operand (next word in compiled code):
+                               //     the length of the string.
+     URX_BACKREF_I     = 41,   // Case insensitive back reference.
+                               //   Parameter is the index of the
+                               //   capture group variables in the state stack frame.
+     URX_DOLLAR_M      = 42,   // $ in multi-line mode.
+     URX_CARET_M       = 43,   // ^ in multi-line mode.
+     URX_LB_START      = 44,   // LookBehind Start.
+                               //   Paramater is data location
+     URX_LB_CONT       = 45,   // LookBehind Continue.
+                               //   Param 0:  the data location
+                               //   Param 1:  The minimum length of the look-behind match
+                               //   Param 2:  The max length of the look-behind match
+     URX_LB_END        = 46,   // LookBehind End.
+                               //   Parameter is the data location.
+                               //     Check that match ended at the right spot,
+                               //     Restore original input string len.
+     URX_LBN_CONT      = 47,   // Negative LookBehind Continue
+                               //   Param 0:  the data location
+                               //   Param 1:  The minimum length of the look-behind match
+                               //   Param 2:  The max     length of the look-behind match
+                               //   Param 3:  The pattern loc following the look-behind block.
+     URX_LBN_END       = 48,   // Negative LookBehind end
+                               //   Parameter is the data location.
+                               //   Check that the match ended at the right spot.
+     URX_STAT_SETREF_N = 49,   // Reference to a prebuilt set (e.g. \w), negated
+                               //   Operand is index of set in array of sets.
+     URX_LOOP_SR_I     = 50,   // Init a [set]* loop.
+                               //   Operand is the sets index in array of user sets.
+     URX_LOOP_C        = 51,   // Continue a [set]* or OneChar* loop.
+                               //   Operand is a matcher static data location.
+                               //   Must always immediately follow  LOOP_x_I instruction.
+     URX_LOOP_DOT_I    = 52,   // .*, initialization of the optimized loop.
+                               //   Operand value:
+                               //      bit 0:
+                               //         0:  Normal (. doesn't match new-line) mode.
+                               //         1:  . matches new-line mode.
+                               //      bit 1:  controls what new-lines are recognized by this operation.
+                               //         0:  All Unicode New-lines
+                               //         1:  UNIX_LINES, \u000a only.
+     URX_BACKSLASH_BU  = 53,   // \b or \B in UREGEX_UWORD mode, using Unicode style
+                               //   word boundaries.
+     URX_DOLLAR_D      = 54,   // $ end of input test, in UNIX_LINES mode.
+     URX_DOLLAR_MD     = 55,   // $ end of input test, in MULTI_LINE and UNIX_LINES mode.
+     URX_BACKSLASH_H   = 56,   // Value field:  0:  \h    1:  \H
+     URX_BACKSLASH_R   = 57,   // Any line break sequence.
+     URX_BACKSLASH_V   = 58    // Value field:  0:  \v    1:  \V
+
+};
+
+// Keep this list of opcode names in sync with the above enum
+//   Used for debug printing only.
+#define URX_OPCODE_NAMES       \
+        "               ",     \
+        "BACKTRACK",           \
+        "END",                 \
+        "ONECHAR",             \
+        "STRING",              \
+        "STRING_LEN",          \
+        "STATE_SAVE",          \
+        "NOP",                 \
+        "START_CAPTURE",       \
+        "END_CAPTURE",         \
+        "URX_STATIC_SETREF",   \
+        "SETREF",              \
+        "DOTANY",              \
+        "JMP",                 \
+        "FAIL",                \
+        "JMP_SAV",             \
+        "BACKSLASH_B",         \
+        "BACKSLASH_G",         \
+        "JMP_SAV_X",           \
+        "BACKSLASH_X",         \
+        "BACKSLASH_Z",         \
+        "DOTANY_ALL",          \
+        "BACKSLASH_D",         \
+        "CARET",               \
+        "DOLLAR",              \
+        "CTR_INIT",            \
+        "CTR_INIT_NG",         \
+        "DOTANY_UNIX",         \
+        "CTR_LOOP",            \
+        "CTR_LOOP_NG",         \
+        "URX_CARET_M_UNIX",    \
+        "RELOC_OPRND",         \
+        "STO_SP",              \
+        "LD_SP",               \
+        "BACKREF",             \
+        "STO_INP_LOC",         \
+        "JMPX",                \
+        "LA_START",            \
+        "LA_END",              \
+        "ONECHAR_I",           \
+        "STRING_I",            \
+        "BACKREF_I",           \
+        "DOLLAR_M",            \
+        "CARET_M",             \
+        "LB_START",            \
+        "LB_CONT",             \
+        "LB_END",              \
+        "LBN_CONT",            \
+        "LBN_END",             \
+        "STAT_SETREF_N",       \
+        "LOOP_SR_I",           \
+        "LOOP_C",              \
+        "LOOP_DOT_I",          \
+        "BACKSLASH_BU",        \
+        "DOLLAR_D",            \
+        "DOLLAR_MD",           \
+        "URX_BACKSLASH_H",     \
+        "URX_BACKSLASH_R",     \
+        "URX_BACKSLASH_V" 
+
+
+//
+//  Convenience macros for assembling and disassembling a compiled operation.
+//
+#define URX_TYPE(x)          ((uint32_t)(x) >> 24)
+#define URX_VAL(x)           ((x) & 0xffffff)
+
+
+//
+//  Access to Unicode Sets composite character properties
+//     The sets are accessed by the match engine for things like \w (word boundary)
+//
+enum {
+     URX_ISWORD_SET  = 1,
+     URX_ISALNUM_SET = 2,
+     URX_ISALPHA_SET = 3,
+     URX_ISSPACE_SET = 4,
+
+     URX_GC_NORMAL,          // Sets for finding grapheme cluster boundaries.
+     URX_GC_EXTEND,
+     URX_GC_CONTROL,
+     URX_GC_L,
+     URX_GC_LV,
+     URX_GC_LVT,
+     URX_GC_V,
+     URX_GC_T,
+
+     URX_LAST_SET,
+
+     URX_NEG_SET     = 0x800000          // Flag bit to reverse sense of set
+                                         //   membership test.
+};
+
+
+//
+//  Match Engine State Stack Frame Layout.
+//
+struct REStackFrame {
+    // Header
+    int64_t            fInputIdx;        // Position of next character in the input string
+    int64_t            fPatIdx;          // Position of next Op in the compiled pattern
+                                         // (int64_t for UVector64, values fit in an int32_t)
+    // Remainder
+    int64_t            fExtra[1];        // Extra state, for capture group start/ends
+                                         //   atomic parentheses, repeat counts, etc.
+                                         //   Locations assigned at pattern compile time.
+                                         //   Variable-length array.
+};
+// number of UVector elements in the header
+#define RESTACKFRAME_HDRCOUNT 2
+
+//
+//  Start-Of-Match type.  Used by find() to quickly scan to positions where a
+//                        match might start before firing up the full match engine.
+//
+enum StartOfMatch {
+    START_NO_INFO,             // No hint available.
+    START_CHAR,                // Match starts with a literal code point.
+    START_SET,                 // Match starts with something matching a set.
+    START_START,               // Match starts at start of buffer only (^ or \A)
+    START_LINE,                // Match starts with ^ in multi-line mode.
+    START_STRING               // Match starts with a literal string.
+};
+
+#define START_OF_MATCH_STR(v) ((v)==START_NO_INFO? "START_NO_INFO" : \
+                               (v)==START_CHAR?    "START_CHAR"    : \
+                               (v)==START_SET?     "START_SET"     : \
+                               (v)==START_START?   "START_START"   : \
+                               (v)==START_LINE?    "START_LINE"    : \
+                               (v)==START_STRING?  "START_STRING"  : \
+                                                   "ILLEGAL")
+
+//
+//  8 bit set, to fast-path latin-1 set membership tests.
+//
+struct Regex8BitSet : public UMemory {
+    inline Regex8BitSet();
+    inline void operator = (const Regex8BitSet &s);
+    inline void init(const UnicodeSet *src);
+    inline UBool contains(UChar32 c);
+    inline void  add(UChar32 c);
+    int8_t d[32];
+};
+
+inline Regex8BitSet::Regex8BitSet() {
+    uprv_memset(d, 0, sizeof(d));
+}
+
+inline UBool Regex8BitSet::contains(UChar32 c) {
+    // No bounds checking!  This is deliberate.
+    return ((d[c>>3] & 1 <<(c&7)) != 0);
+}
+
+inline void  Regex8BitSet::add(UChar32 c) {
+    d[c>>3] |= 1 << (c&7);
+}
+
+inline void Regex8BitSet::init(const UnicodeSet *s) {
+    if (s != NULL) {
+        for (int32_t i=0; i<=255; i++) {
+            if (s->contains(i)) {
+                this->add(i);
+            }
+        }
+    }
+}
+
+inline void Regex8BitSet::operator = (const Regex8BitSet &s) {
+   uprv_memcpy(d, s.d, sizeof(d));
+}
+
+
+//  Case folded UText Iterator helper class.
+//  Wraps a UText, provides a case-folded enumeration over its contents.
+//  Used in implementing case insensitive matching constructs.
+//  Implementation in rematch.cpp
+
+class CaseFoldingUTextIterator: public UMemory {
+      public:
+        CaseFoldingUTextIterator(UText &text);
+        ~CaseFoldingUTextIterator();
+
+        UChar32 next();           // Next case folded character
+
+        UBool   inExpansion();    // True if last char returned from next() and the
+                                  //  next to be returned both originated from a string
+                                  //  folding of the same code point from the orignal UText.
+      private:
+        UText             &fUText;
+        const  UChar      *fFoldChars;
+        int32_t            fFoldLength;
+        int32_t            fFoldIndex;
+
+};
+
+
+// Case folded UChar * string iterator.
+//  Wraps a UChar  *, provides a case-folded enumeration over its contents.
+//  Used in implementing case insensitive matching constructs.
+//  Implementation in rematch.cpp
+
+class CaseFoldingUCharIterator: public UMemory {
+      public:
+        CaseFoldingUCharIterator(const UChar *chars, int64_t start, int64_t limit);
+        ~CaseFoldingUCharIterator();
+
+        UChar32 next();           // Next case folded character
+
+        UBool   inExpansion();    // True if last char returned from next() and the
+                                  //  next to be returned both originated from a string
+                                  //  folding of the same code point from the orignal UText.
+
+        int64_t  getIndex();      // Return the current input buffer index.
+
+      private:
+        const  UChar      *fChars;
+        int64_t            fIndex;
+        int64_t            fLimit;
+        const  UChar      *fFoldChars;
+        int32_t            fFoldLength;
+        int32_t            fFoldIndex;
+
+};
+
+U_NAMESPACE_END
+#endif
+