path: root/doc/faq.texi

\input texinfo @c -*- texinfo -*-

@settitle FFmpeg FAQ
@titlepage
@sp 7
@center @titlefont{FFmpeg FAQ}
@sp 3
@end titlepage


@chapter General Problems

@section I cannot read this file although this format seems to be supported by ffmpeg.

Even if ffmpeg can read the file format, it may not support all its
codecs. Please consult the supported codec list in the ffmpeg
documentation.

@section How do I encode single pictures to movies?

First, rename your pictures to follow a numerical sequence.
For example, img1.jpg, img2.jpg, img3.jpg,...
Then you may run:

@example
  ffmpeg -f image2 -i img%d.jpg /tmp/a.mpg
@end example

Notice that @samp{%d} is replaced by the image number.

@file{img%03d.jpg} means the sequence @file{img001.jpg}, @file{img002.jpg}, etc...

The same logic is used for any image format that ffmpeg reads.

@section How do I encode movie to single pictures?

Use:

@example
  ffmpeg -i movie.mpg movie%d.jpg
@end example

The @file{movie.mpg} used as input will be converted to
@file{movie1.jpg}, @file{movie2.jpg}, etc...

Instead of relying on file format self-recognition, you may also use
@table @option
@item -vcodec ppm
@item -vcodec png
@item -vcodec mjpeg
@end table
to force the encoding.

Applying that to the previous example:
@example
  ffmpeg -i movie.mpg -f image2 -vcodec mjpeg menu%d.jpg
@end example

Beware that there is no "jpeg" codec. Use "mjpeg" instead.

@section FFmpeg does not support codec XXX. Can you include a Windows DLL loader to support it?

No. FFmpeg only supports open source codecs. Windows DLLs are not
portable, bloated and often slow.

@section I get "Unsupported codec (id=86043) for input stream #0.1". What is the problem?

This is the Qcelp codec, FFmpeg has no support for that codec currently. Try mencoder/mplayer it might work.

@section Why do I see a slight quality degradation with multithreaded MPEG* encoding?

For multithreaded MPEG* encoding, the encoded slices must be independent,
otherwise thread n would practically have to wait for n-1 to finish, so it's
quite logical that there is a small reduction of quality. This is not a bug.

@section How can I read from the standard input or write to the standard output?

Use @file{-} as filename.

@section Why does ffmpeg not decode audio in VOB files?

The audio is AC3 (a.k.a. A/52). AC3 decoding is an optional component in ffmpeg
as the component that handles AC3 decoding (liba52) is currently released under
the GPL. If you have liba52 installed on your system, enable AC3 decoding
with @code{./configure --enable-liba52 --enable-gpl}. Take care: by
enabling AC3, you automatically change the license of libavcodec from
LGPL to GPL.

@section Which codecs are supported by Windows?

Windows does not support standard formats like MPEG very well, unless you
install some additional codecs

The following list of video codecs should work on most Windows systems:
@table @option
@item msmpeg4v2
.avi/.asf
@item msmpeg4
.asf only
@item wmv1
.asf only
@item wmv2
.asf only
@item mpeg4
only if you have some MPEG-4 codec installed like ffdshow or XviD
@item mpeg1
.mpg only
@end table
Note, ASF files often have .wmv or .wma extensions in Windows. It should also
be mentioned that Microsoft claims a patent on the ASF format, and may sue
or threaten users who create ASF files with non-Microsoft software. It is
strongly advised to avoid ASF where possible.

The following list of audio codecs should work on most Windows systems:
@table @option
@item adpcm_ima_wav
@item adpcm_ms
@item pcm
@item mp3
if some MP3 codec like LAME is installed
@end table

@section Why does the chrominance data seem to be sampled at a different time from the luminance data on bt8x8 captures on Linux?

This is a well-known bug in the bt8x8 driver. For 2.4.26 there is a patch at
(@url{http://svn.mplayerhq.hu/michael/trunk/patches/bttv-420-2.4.26.patch?view=co}). This may also
apply cleanly to other 2.4-series kernels.

@section How do I avoid the ugly aliasing artifacts in bt8x8 captures on Linux?

Pass 'combfilter=1 lumafilter=1' to the bttv driver. Note though that 'combfilter=1'
will cause somewhat too strong filtering. A fix is to apply (@url{http://svn.mplayerhq.hu/michael/trunk/patches/bttv-comb-2.4.26.patch?view=co})
or (@url{http://svn.mplayerhq.hu/michael/trunk/patches/bttv-comb-2.6.6.patch?view=co})
and pass 'combfilter=2'.

@section I have a problem with an old version of ffmpeg; where should I report it?
Nowhere. Upgrade to the latest release or if there is no recent release upgrade
to Subversion HEAD. You could also try to report it. Maybe you will get lucky and
become the first person in history to get an answer different from "upgrade
to Subversion HEAD".

@section -f jpeg doesn't work.

Try '-f image2 test%d.jpg'.

@section Why can I not change the framerate?

Some codecs, like MPEG-1/2, only allow a small number of fixed framerates.
Choose a different codec with the -vcodec command line option.

@section ffmpeg does not work; What is wrong?

Try a 'make distclean' in the ffmpeg source directory before the build. If this does not help see
(@url{http://ffmpeg.org/bugreports.php}).

@section How do I encode XviD or DivX video with ffmpeg?

Both XviD and DivX (version 4+) are implementations of the ISO MPEG-4
standard (note that there are many other coding formats that use this
same standard). Thus, use '-vcodec mpeg4' to encode these formats. The
default fourcc stored in an MPEG-4-coded file will be 'FMP4'. If you want
a different fourcc, use the '-vtag' option. E.g., '-vtag xvid' will
force the fourcc 'xvid' to be stored as the video fourcc rather than the
default.

@section How do I encode videos which play on the iPod?

@table @option
@item needed stuff
-acodec libfaac -vcodec mpeg4 width<=320 height<=240
@item working stuff
4mv, title
@item non-working stuff
B-frames
@item example command line
ffmpeg -i input -acodec libfaac -ab 128kb -vcodec mpeg4 -b 1200kb -mbd 2 -flags +4mv+trell -aic 2 -cmp 2 -subcmp 2 -s 320x180 -title X output.mp4
@end table

@section How do I encode videos which play on the PSP?

@table @option
@item needed stuff
-acodec libfaac -vcodec mpeg4 width*height<=76800 width%16=0 height%16=0 -ar 24000 -r 30000/1001 or 15000/1001 -f psp
@item working stuff
4mv, title
@item non-working stuff
B-frames
@item example command line
ffmpeg -i input -acodec libfaac -ab 128kb -vcodec mpeg4 -b 1200kb -ar 24000 -mbd 2 -flags +4mv+trell -aic 2 -cmp 2 -subcmp 2 -s 368x192 -r 30000/1001 -title X -f psp output.mp4
@item needed stuff for H.264
-acodec libfaac -vcodec h264 width*height<=76800 width%16=0? height%16=0? -ar 48000 -coder 1 -r 30000/1001 or 15000/1001 -f psp
@item working stuff for H.264
title, loop filter
@item non-working stuff for H.264
CAVLC
@item example command line
ffmpeg -i input -acodec libfaac -ab 128kb -vcodec h264 -b 1200kb -ar 48000 -mbd 2 -coder 1 -cmp 2 -subcmp 2 -s 368x192 -r 30000/1001 -title X -f psp -flags loop -trellis 2 -partitions parti4x4+parti8x8+partp4x4+partp8x8+partb8x8 output.mp4
@end table

@section Which are good parameters for encoding high quality MPEG-4?

'-mbd rd -flags +4mv+trell+aic -cmp 2 -subcmp 2 -g 300 -pass 1/2',
things to try: '-bf 2', '-flags qprd', '-flags mv0', '-flags skiprd'.

@section Which are good parameters for encoding high quality MPEG-1/MPEG-2?

'-mbd rd -flags +trell -cmp 2 -subcmp 2 -g 100 -pass 1/2'
but beware the '-g 100' might cause problems with some decoders.
Things to try: '-bf 2', '-flags qprd', '-flags mv0', '-flags skiprd.

@section Interlaced video looks very bad when encoded with ffmpeg, whats wrong?

You should use '-flags +ilme+ildct' and maybe '-flags +alt' for interlaced
material, and try '-top 0/1' if the result looks really messed-up.

@section How can I read DirectShow files?

If you have built FFmpeg with @code{./configure --enable-avisynth}
(only possible on MinGW/Cygwin platforms),
then you may use any file that DirectShow can read as input.
(Be aware that this feature has been recently added,
so you will need to help yourself in case of problems.)

Just create an "input.avs" text file with this single line ...
@example
  DirectShowSource("C:\path to your file\yourfile.asf")
@end example
... and then feed that text file to FFmpeg:
@example
  ffmpeg -i input.avs
@end example

For ANY other help on Avisynth, please visit @url{http://www.avisynth.org/}.

@section My bugreport/mail to ffmpeg-devel/user has not received any replies.

Likely reasons
@itemize
@item We are busy and haven't had time yet to read your report or
investigate the issue.
@item You didn't follow bugreports.html.
@item You didn't use Subversion HEAD.
@item You reported a segmentation fault without gdb output.
@item You describe a problem but not how to reproduce it.
@item It's unclear if you use ffmpeg as command line tool or use
libav* from another application.
@item You speak about a video having problems on playback but
not what you use to play it.
@item We have no faint clue what you are talking about besides
that it is related to FFmpeg.
@end itemize

@section How can I join video files?

A few multimedia containers (MPEG-1, MPEG-2 PS, DV) allow to join video files by
merely concatenating them.

Hence you may concatenate your multimedia files by first transcoding them to
these privileged formats, then using the humble @code{cat} command (or the
equally humble @code{copy} under Windows), and finally transcoding back to your
format of choice.

@example
ffmpeg -i input1.avi -sameq intermediate1.mpg
ffmpeg -i input2.avi -sameq intermediate2.mpg
cat intermediate1.mpg intermediate2.mpg > intermediate_all.mpg
ffmpeg -i intermediate_all.mpg -sameq output.avi
@end example

Notice that you should either use @code{-sameq} or set a reasonably high
bitrate for your intermediate and output files, if you want to preserve
video quality.

Also notice that you may avoid the huge intermediate files by taking advantage
of named pipes, should your platform support it:

@example
mkfifo intermediate1.mpg
mkfifo intermediate2.mpg
ffmpeg -i input1.avi -sameq -y intermediate1.mpg < /dev/null &
ffmpeg -i input2.avi -sameq -y intermediate2.mpg < /dev/null &
cat intermediate1.mpg intermediate2.mpg |\
ffmpeg -f mpeg -i - -sameq -vcodec mpeg4 -acodec libmp3lame output.avi
@end example

Similarly, the yuv4mpegpipe format, and the raw video, raw audio codecs also
allow concatenation, and the transcoding step is almost lossless.

For example, let's say we want to join two FLV files into an output.flv file:

@example
mkfifo temp1.a
mkfifo temp1.v
mkfifo temp2.a
mkfifo temp2.v
mkfifo all.a
mkfifo all.v
ffmpeg -i input1.flv -vn -f u16le -acodec pcm_s16le -ac 2 -ar 44100 - > temp1.a < /dev/null &
ffmpeg -i input2.flv -vn -f u16le -acodec pcm_s16le -ac 2 -ar 44100 - > temp2.a < /dev/null &
ffmpeg -i input1.flv -an -f yuv4mpegpipe - > temp1.v < /dev/null &
ffmpeg -i input2.flv -an -f yuv4mpegpipe - > temp2.v < /dev/null &
cat temp1.a temp2.a > all.a &
cat temp1.v temp2.v > all.v &
ffmpeg -f u16le -acodec pcm_s16le -ac 2 -ar 44100 -i all.a \
       -f yuv4mpegpipe -i all.v \
       -sameq -y output.flv
rm temp[12].[av] all.[av]
@end example

@chapter Development

@section When will the next FFmpeg version be released? / Why are FFmpeg releases so few and far between?

Like most open source projects FFmpeg suffers from a certain lack of
manpower. For this reason the developers have to prioritize the work
they do and putting out releases is not at the top of the list, fixing
bugs and reviewing patches takes precedence. Please don't complain or
request more timely and/or frequent releases unless you are willing to
help out creating them.

@section Why doesn't FFmpeg support feature [xyz]?

Because no one has taken on that task yet. FFmpeg development is
driven by the tasks that are important to the individual developers.
If there is a feature that is important to you, the best way to get
it implemented is to undertake the task yourself.


@section Are there examples illustrating how to use the FFmpeg libraries, particularly libavcodec and libavformat?

Yes. Read the Developers Guide of the FFmpeg documentation. Alternatively,
examine the source code for one of the many open source projects that
already incorporate ffmpeg at (@url{projects.php}).

@section Can you support my C compiler XXX?

It depends. If your compiler is C99-compliant, then patches to support
it are likely to be welcome if they do not pollute the source code
with @code{#ifdef}s related to the compiler.

@section Visual C++ produces many errors.

Visual C++ is not compliant to the C standard and does not support
the inline assembly used in FFmpeg.
If you wish - for whatever weird reason - to use Visual C++ for your
project then you can link the Visual C++ code with libav* as long as
you compile the latter with a working C compiler. For more information, see
the @emph{Visual C++ compatibility} section in the FFmpeg documentation.

There have been efforts to make FFmpeg compatible with Visual C++ in the
past. However, they have all been rejected as too intrusive, especially
since MinGW does the job perfectly adequately. None of the core developers
work with Visual C++ and thus this item is low priority. Should you find
the silver bullet that solves this problem, feel free to shoot it at us.

@section Can I use FFmpeg or libavcodec under Windows?

Yes, but the MinGW tools @emph{must} be used to compile FFmpeg. You
can link the resulting DLLs with any other Windows program. Read the
@emph{Native Windows Compilation} and @emph{Visual C++ compatibility}
sections in the FFmpeg documentation to find more information.

To get help and instructions for using FFmpeg under Windows, check out
the FFmpeg Windows Help Forum at
@url{http://arrozcru.no-ip.org/ffmpeg/}.

@section Can you add automake, libtool or autoconf support?

No. These tools are too bloated and they complicate the build.

@section Why not rewrite ffmpeg in object-oriented C++?

ffmpeg is already organized in a highly modular manner and does not need to
be rewritten in a formal object language. Further, many of the developers
favor straight C; it works for them. For more arguments on this matter,
read "Programming Religion" at (@url{http://www.tux.org/lkml/#s15}).

@section Why are the ffmpeg programs devoid of debugging symbols?

The build process creates ffmpeg_g, ffplay_g, etc. which contain full debug
information. Those binaries are strip'd to create ffmpeg, ffplay, etc. If
you need the debug information, used the *_g versions.

@section I do not like the LGPL, can I contribute code under the GPL instead?

Yes, as long as the code is optional and can easily and cleanly be placed
under #ifdef CONFIG_GPL without breaking anything. So for example a new codec
or filter would be OK under GPL while a bugfix to LGPL code would not.

@section I want to compile xyz.c alone but my compiler produced many errors.

Common code is in its own files in libav* and is used by the individual
codecs. They will not work without the common parts, you have to compile
the whole libav*. If you wish, disable some parts with configure switches.
You can also try to hack it and remove more, but if you had problems fixing
the compilation failure then you are probably not qualified for this.

@section I have a file in memory / a API different from *open/*read/ libc how do i use it with libavformat?

You have to implement a URLProtocol, see libavformat/file.c in FFmpeg
and libmpdemux/demux_lavf.c in MPlayer sources.

@section I get "No compatible shell script interpreter found." in MSys.

The standard MSys bash (2.04) is broken. You need to install 2.05 or later.

@section I tried to pass RTP packets into a decoder, but it doesn't work.

Of course not, you MUST strip ALL RTP headers and assemble valid packets
first, an MP3 decoder decodes MP3 packets not bastardized MP3 packets
encapsulated in RTP. The same applies to all decoders, this is not specific
to ffmpeg or libavcodec.

@section Where can I find libav* headers for Pascal/Delphi?

see @url{http://www.iversenit.dk/dev/ffmpeg-headers/}

@section Where is the documentation about ffv1, msmpeg4, asv1, 4xm?

see @url{http://svn.mplayerhq.hu/michael/trunk/docs/}

@section how do i feed rtp-h263 (and likely other rtp bastardizations of codecs) to libavcodec?

Remove _ALL_ rtp trash and either feed the fragments through a AVParser and
then into the decoder or merge the fragments yourself into proper frames and
feed them into the decoder. Note! the payload of h263-rtp is is not valid
h263 you at least have to merge the first and last bytes discarding rtp trash
from them, possibly more.

@bye