/*
 * copyright (c) 2001 Fabrice Bellard
 *
 * This file is part of FFmpeg.
 *
 * FFmpeg is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Lesser General Public
 * License as published by the Free Software Foundation; either
 * version 2.1 of the License, or (at your option) any later version.
 *
 * FFmpeg is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public
 * License along with FFmpeg; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
 */

#ifndef AVFORMAT_AVFORMAT_H
#define AVFORMAT_AVFORMAT_H

/**
 * @file
 * @ingroup libavf
 * Main libavformat public API header
 */

/**
 * @defgroup libavf I/O and Muxing/Demuxing Library
 * @{
 *
 * Libavformat (lavf) is a library for dealing with various media container
 * formats. Its main two purposes are demuxing - i.e. splitting a media file
 * into component streams, and the reverse process of muxing - writing supplied
 * data in a specified container format. It also has an @ref lavf_io
 * "I/O module" which supports a number of protocols for accessing the data (e.g.
 * file, tcp, http and others). Before using lavf, you need to call
 * av_register_all() to register all compiled muxers, demuxers and protocols.
 * Unless you are absolutely sure you won't use libavformat's network
 * capabilities, you should also call avformat_network_init().
 *
 * A supported input format is described by an AVInputFormat struct, conversely
 * an output format is described by AVOutputFormat. You can iterate over all
 * registered input/output formats using the av_iformat_next() /
 * av_oformat_next() functions. The protocols layer is not part of the public
 * API, so you can only get the names of supported protocols with the
 * avio_enum_protocols() function.
 *
 * Main lavf structure used for both muxing and demuxing is AVFormatContext,
 * which exports all information about the file being read or written. As with
 * most Libavformat structures, its size is not part of public ABI, so it cannot be
 * allocated on stack or directly with av_malloc(). To create an
 * AVFormatContext, use avformat_alloc_context() (some functions, like
 * avformat_open_input() might do that for you).
 *
 * Most importantly an AVFormatContext contains:
 * @li the @ref AVFormatContext.iformat "input" or @ref AVFormatContext.oformat
 * "output" format. It is either autodetected or set by user for input;
 * always set by user for output.
 * @li an @ref AVFormatContext.streams "array" of AVStreams, which describe all
 * elementary streams stored in the file. AVStreams are typically referred to
 * using their index in this array.
 * @li an @ref AVFormatContext.pb "I/O context". It is either opened by lavf or
 * set by user for input, always set by user for output (unless you are dealing
 * with an AVFMT_NOFILE format).
 *
 * @section lavf_options Passing options to (de)muxers
 * Lavf allows to configure muxers and demuxers using the @ref avoptions
 * mechanism. Generic (format-independent) libavformat options are provided by
 * AVFormatContext, they can be examined from a user program by calling
 * av_opt_next() / av_opt_find() on an allocated AVFormatContext (or its AVClass
 * from avformat_get_class()). Private (format-specific) options are provided by
 * AVFormatContext.priv_data if and only if AVInputFormat.priv_class /
 * AVOutputFormat.priv_class of the corresponding format struct is non-NULL.
 * Further options may be provided by the @ref AVFormatContext.pb "I/O context",
 * if its AVClass is non-NULL, and the protocols layer. See the discussion on
 * nesting in @ref avoptions documentation to learn how to access those.
 *
 * @defgroup lavf_decoding Demuxing
 * @{
 * Demuxers read a media file and split it into chunks of data (@em packets). A
 * @ref AVPacket "packet" contains one or more encoded frames which belongs to a
 * single elementary stream. In the lavf API this process is represented by the
 * avformat_open_input() function for opening a file, av_read_frame() for
 * reading a single packet and finally avformat_close_input(), which does the
 * cleanup.
 *
 * @section lavf_decoding_open Opening a media file
 * The minimum information required to open a file is its URL or filename, which
 * is passed to avformat_open_input(), as in the following code:
 * @code
 * const char    *url = "in.mp3";
 * AVFormatContext *s = NULL;
 * int ret = avformat_open_input(&s, url, NULL, NULL);
 * if (ret < 0)
 *     abort();
 * @endcode
 * The above code attempts to allocate an AVFormatContext, open the
 * specified file (autodetecting the format) and read the header, exporting the
 * information stored there into s. Some formats do not have a header or do not
 * store enough information there, so it is recommended that you call the
 * avformat_find_stream_info() function which tries to read and decode a few
 * frames to find missing information.
 *
 * In some cases you might want to preallocate an AVFormatContext yourself with
 * avformat_alloc_context() and do some tweaking on it before passing it to
 * avformat_open_input(). One such case is when you want to use custom functions
 * for reading input data instead of lavf internal I/O layer.
 * To do that, create your own AVIOContext with avio_alloc_context(), passing
 * your reading callbacks to it. Then set the @em pb field of your
 * AVFormatContext to newly created AVIOContext.
 *
 * Since the format of the opened file is in general not known until after
 * avformat_open_input() has returned, it is not possible to set demuxer private
 * options on a preallocated context. Instead, the options should be passed to
 * avformat_open_input() wrapped in an AVDictionary:
 * @code
 * AVDictionary *options = NULL;
 * av_dict_set(&options, "video_size", "640x480", 0);
 * av_dict_set(&options, "pixel_format", "rgb24", 0);
 *
 * if (avformat_open_input(&s, url, NULL, &options) < 0)
 *     abort();
 * av_dict_free(&options);
 * @endcode
 * This code passes the private options 'video_size' and 'pixel_format' to the
 * demuxer. They would be necessary for e.g. the rawvideo demuxer, since it
 * cannot know how to interpret raw video data otherwise. If the format turns
 * out to be something different than raw video, those options will not be
 * recognized by the demuxer and therefore will not be applied. Such unrecognized
 * options are then returned in the options dictionary (recognized options are
 * consumed). The calling program can handle such unrecognized options as it
 * wishes, e.g.
 * @code
 * AVDictionaryEntry *e;
 * if (e = av_dict_get(options, "", NULL, AV_DICT_IGNORE_SUFFIX)) {
 *     fprintf(stderr, "Option %s not recognized by the demuxer.\n", e->key);
 *     abort();
 * }
 * @endcode
 *
 * After you have finished reading the file, you must close it with
 * avformat_close_input(). It will free everything associated with the file.
 *
 * @section lavf_decoding_read Reading from an opened file
 * Reading data from an opened AVFormatContext is done by repeatedly calling
 * av_read_frame() on it. Each call, if successful, will return an AVPacket
 * containing encoded data for one AVStream, identified by
 * AVPacket.stream_index. This packet may be passed straight into the libavcodec
 * decoding functions avcodec_decode_video2(), avcodec_decode_audio4() or
 * avcodec_decode_subtitle2() if the caller wishes to decode the data.
 *
 * AVPacket.pts, AVPacket.dts and AVPacket.duration timing information will be
 * set if known. They may also be unset (i.e. AV_NOPTS_VALUE for
 * pts/dts, 0 for duration) if the stream does not provide them. The timing
 * information will be in AVStream.time_base units, i.e. it has to be
 * multiplied by the timebase to convert them to seconds.
 *
 * The packet data belongs to the demuxer and is invalid after the next call to
 * av_read_frame(). The user must free the packet with av_free_packet() before
 * calling av_read_frame() again or closing the file.
 *
 * @section lavf_decoding_seek Seeking
 * @}
 *
 * @defgroup lavf_encoding Muxing
 * @{
 * @}
 *
 * @defgroup lavf_io I/O Read/Write
 * @{
 * @}
 *
 * @defgroup lavf_codec Demuxers
 * @{
 * @defgroup lavf_codec_native Native Demuxers
 * @{
 * @}
 * @defgroup lavf_codec_wrappers External library wrappers
 * @{
 * @}
 * @}
 * @defgroup lavf_protos I/O Protocols
 * @{
 * @}
 * @defgroup lavf_internal Internal
 * @{
 * @}
 * @}
 *
 */

#include <time.h>
#include <stdio.h>  /* FILE */
#include "libavcodec/avcodec.h"
#include "libavutil/dict.h"
#include "libavutil/log.h"

#include "avio.h"
#include "libavformat/version.h"

struct AVFormatContext;


/**
 * @defgroup metadata_api Public Metadata API
 * @{
 * @ingroup libavf
 * The metadata API allows libavformat to export metadata tags to a client
 * application when demuxing. Conversely it allows a client application to
 * set metadata when muxing.
 *
 * Metadata is exported or set as pairs of key/value strings in the 'metadata'
 * fields of the AVFormatContext, AVStream, AVChapter and AVProgram structs
 * using the @ref lavu_dict "AVDictionary" API. Like all strings in FFmpeg,
 * metadata is assumed to be UTF-8 encoded Unicode. Note that metadata
 * exported by demuxers isn't checked to be valid UTF-8 in most cases.
 *
 * Important concepts to keep in mind:
 * -  Keys are unique; there can never be 2 tags with the same key. This is
 *    also meant semantically, i.e., a demuxer should not knowingly produce
 *    several keys that are literally different but semantically identical.
 *    E.g., key=Author5, key=Author6. In this example, all authors must be
 *    placed in the same tag.
 * -  Metadata is flat, not hierarchical; there are no subtags. If you
 *    want to store, e.g., the email address of the child of producer Alice
 *    and actor Bob, that could have key=alice_and_bobs_childs_email_address.
 * -  Several modifiers can be applied to the tag name. This is done by
 *    appending a dash character ('-') and the modifier name in the order
 *    they appear in the list below -- e.g. foo-eng-sort, not foo-sort-eng.
 *    -  language -- a tag whose value is localized for a particular language
 *       is appended with the ISO 639-2/B 3-letter language code.
 *       For example: Author-ger=Michael, Author-eng=Mike
 *       The original/default language is in the unqualified "Author" tag.
 *       A demuxer should set a default if it sets any translated tag.
 *    -  sorting  -- a modified version of a tag that should be used for
 *       sorting will have '-sort' appended. E.g. artist="The Beatles",
 *       artist-sort="Beatles, The".
 *
 * -  Demuxers attempt to export metadata in a generic format, however tags
 *    with no generic equivalents are left as they are stored in the container.
 *    Follows a list of generic tag names:
 *
 @verbatim
 album        -- name of the set this work belongs to
 album_artist -- main creator of the set/album, if different from artist.
                 e.g. "Various Artists" for compilation albums.
 artist       -- main creator of the work
 comment      -- any additional description of the file.
 composer     -- who composed the work, if different from artist.
 copyright    -- name of copyright holder.
 creation_time-- date when the file was created, preferably in ISO 8601.
 date         -- date when the work was created, preferably in ISO 8601.
 disc         -- number of a subset, e.g. disc in a multi-disc collection.
 encoder      -- name/settings of the software/hardware that produced the file.
 encoded_by   -- person/group who created the file.
 filename     -- original name of the file.
 genre        -- <self-evident>.
 language     -- main language in which the work is performed, preferably
                 in ISO 639-2 format. Multiple languages can be specified by
                 separating them with commas.
 performer    -- artist who performed the work, if different from artist.
                 E.g for "Also sprach Zarathustra", artist would be "Richard
                 Strauss" and performer "London Philharmonic Orchestra".
 publisher    -- name of the label/publisher.
 service_name     -- name of the service in broadcasting (channel name).
 service_provider -- name of the service provider in broadcasting.
 title        -- name of the work.
 track        -- number of this work in the set, can be in form current/total.
 variant_bitrate -- the total bitrate of the bitrate variant that the current stream is part of
 @endverbatim
 *
 * Look in the examples section for an application example how to use the Metadata API.
 *
 * @}
 */

/* packet functions */


/**
 * Allocate and read the payload of a packet and initialize its
 * fields with default values.
 *
 * @param pkt packet
 * @param size desired payload size
 * @return >0 (read size) if OK, AVERROR_xxx otherwise
 */
int av_get_packet(AVIOContext *s, AVPacket *pkt, int size);


/**
 * Read data and append it to the current content of the AVPacket.
 * If pkt->size is 0 this is identical to av_get_packet.
 * Note that this uses av_grow_packet and thus involves a realloc
 * which is inefficient. Thus this function should only be used
 * when there is no reasonable way to know (an upper bound of)
 * the final size.
 *
 * @param pkt packet
 * @param size amount of data to read
 * @return >0 (read size) if OK, AVERROR_xxx otherwise, previous data
 *         will not be lost even if an error occurs.
 */
int av_append_packet(AVIOContext *s, AVPacket *pkt, int size);

/*************************************************/
/* fractional numbers for exact pts handling */

/**
 * The exact value of the fractional number is: 'val + num / den'.
 * num is assumed to be 0 <= num < den.
 */
typedef struct AVFrac {
    int64_t val, num, den;
} AVFrac;

/*************************************************/
/* input/output formats */

struct AVCodecTag;

/**
 * This structure contains the data a format has to probe a file.
 */
typedef struct AVProbeData {
    const char *filename;
    unsigned char *buf; /**< Buffer must have AVPROBE_PADDING_SIZE of extra allocated bytes filled with zero. */
    int buf_size;       /**< Size of buf except extra allocated bytes */
} AVProbeData;

#define AVPROBE_SCORE_MAX 100               ///< maximum score, half of that is used for file-extension-based detection
#define AVPROBE_PADDING_SIZE 32             ///< extra allocated bytes at the end of the probe buffer

/// Demuxer will use avio_open, no opened file should be provided by the caller.
#define AVFMT_NOFILE        0x0001
#define AVFMT_NEEDNUMBER    0x0002 /**< Needs '%d' in filename. */
#define AVFMT_SHOW_IDS      0x0008 /**< Show format stream IDs numbers. */
#define AVFMT_RAWPICTURE    0x0020 /**< Format wants AVPicture structure for
                                      raw picture data. */
#define AVFMT_GLOBALHEADER  0x0040 /**< Format wants global header. */
#define AVFMT_NOTIMESTAMPS  0x0080 /**< Format does not need / have any timestamps. */
#define AVFMT_GENERIC_INDEX 0x0100 /**< Use generic index building code. */
#define AVFMT_TS_DISCONT    0x0200 /**< Format allows timestamp discontinuities. Note, muxers always require valid (monotone) timestamps */
#define AVFMT_VARIABLE_FPS  0x0400 /**< Format allows variable fps. */
#define AVFMT_NODIMENSIONS  0x0800 /**< Format does not need width/height */
#define AVFMT_NOSTREAMS     0x1000 /**< Format does not require any streams */
#define AVFMT_NOBINSEARCH   0x2000 /**< Format does not allow to fallback to binary search via read_timestamp */
#define AVFMT_NOGENSEARCH   0x4000 /**< Format does not allow to fallback to generic search */
#define AVFMT_NO_BYTE_SEEK  0x8000 /**< Format does not allow seeking by bytes */
#define AVFMT_ALLOW_FLUSH  0x10000 /**< Format allows flushing. If not set, the muxer will not receive a NULL packet in the write_packet function. */
#define AVFMT_SEEK_TO_PTS   0x4000000 /**< Seeking is based on PTS */
#define AVFMT_TS_NONSTRICT  0x8000000 /**< Format does not require strictly
                                           increasing timestamps, but they must
                                           still be monotonic */

/**
 * @addtogroup lavf_encoding
 * @{
 */
typedef struct AVOutputFormat {
    const char *name;
    /**
     * Descriptive name for the format, meant to be more human-readable
     * than name. You should use the NULL_IF_CONFIG_SMALL() macro
     * to define it.
     */
    const char *long_name;
    const char *mime_type;
    const char *extensions; /**< comma-separated filename extensions */
    /* output support */
    enum CodecID audio_codec;    /**< default audio codec */
    enum CodecID video_codec;    /**< default video codec */
    enum CodecID subtitle_codec; /**< default subtitle codec */
    /**
     * can use flags: AVFMT_NOFILE, AVFMT_NEEDNUMBER, AVFMT_RAWPICTURE,
     * AVFMT_GLOBALHEADER, AVFMT_NOTIMESTAMPS, AVFMT_VARIABLE_FPS,
     * AVFMT_NODIMENSIONS, AVFMT_NOSTREAMS, AVFMT_ALLOW_FLUSH
     */
    int flags;

    /**
     * List of supported codec_id-codec_tag pairs, ordered by "better
     * choice first". The arrays are all terminated by CODEC_ID_NONE.
     */
    const struct AVCodecTag * const *codec_tag;


    const AVClass *priv_class; ///< AVClass for the private context

    /*****************************************************************
     * No fields below this line are part of the public API. They
     * may not be used outside of libavformat and can be changed and
     * removed at will.
     * New public fields should be added right above.
     *****************************************************************
     */
    struct AVOutputFormat *next;
    /**
     * size of private data so that it can be allocated in the wrapper
     */
    int priv_data_size;

    int (*write_header)(struct AVFormatContext *);
    /**
     * Write a packet. If AVFMT_ALLOW_FLUSH is set in flags,
     * pkt can be NULL in order to flush data buffered in the muxer.
     * When flushing, return 0 if there still is more data to flush,
     * or 1 if everything was flushed and there is no more buffered
     * data.
     */
    int (*write_packet)(struct AVFormatContext *, AVPacket *pkt);
    int (*write_trailer)(struct AVFormatContext *);
    /**
     * Currently only used to set pixel format if not YUV420P.
     */
    int (*interleave_packet)(struct AVFormatContext *, AVPacket *out,
                             AVPacket *in, int flush);
    /**
     * Test if the given codec can be stored in this container.
     *
     * @return 1 if the codec is supported, 0 if it is not.
     *         A negative number if unknown.
     */
    int (*query_codec)(enum CodecID id, int std_compliance);

    void (*get_output_timestamp)(struct AVFormatContext *s, int stream,
                                 int64_t *dts, int64_t *wall);
} AVOutputFormat;
/**
 * @}
 */

/**
 * @addtogroup lavf_decoding
 * @{
 */
typedef struct AVInputFormat {
    /**
     * A comma separated list of short names for the format. New names
     * may be appended with a minor bump.
     */
    const char *name;

    /**
     * Descriptive name for the format, meant to be more human-readable
     * than name. You should use the NULL_IF_CONFIG_SMALL() macro
     * to define it.
     */
    const char *long_name;

    /**
     * Can use flags: AVFMT_NOFILE, AVFMT_NEEDNUMBER, AVFMT_SHOW_IDS,
     * AVFMT_GENERIC_INDEX, AVFMT_TS_DISCONT, AVFMT_NOBINSEARCH,
     * AVFMT_NOGENSEARCH, AVFMT_NO_BYTE_SEEK.
     */
    int flags;

    /**
     * If extensions are defined, then no probe is done. You should
     * usually not use extension format guessing because it is not
     * reliable enough
     */
    const char *extensions;

    const struct AVCodecTag * const *codec_tag;

    const AVClass *priv_class; ///< AVClass for the private context

    /*****************************************************************
     * No fields below this line are part of the public API. They
     * may not be used outside of libavformat and can be changed and
     * removed at will.
     * New public fields should be added right above.
     *****************************************************************
     */
    struct AVInputFormat *next;

    /**
     * Raw demuxers store their codec ID here.
     */
    int raw_codec_id;

    /**
     * Size of private data so that it can be allocated in the wrapper.
     */
    int priv_data_size;

    /**
     * Tell if a given file has a chance of being parsed as this format.
     * The buffer provided is guaranteed to be AVPROBE_PADDING_SIZE bytes
     * big so you do not have to check for that unless you need more.
     */
    int (*read_probe)(AVProbeData *);

    /**
     * Read the format header and initialize the AVFormatContext
     * structure. Return 0 if OK. Only used in raw format right
     * now. 'avformat_new_stream' should be called to create new streams.
     */
    int (*read_header)(struct AVFormatContext *);

    /**
     * Read one packet and put it in 'pkt'. pts and flags are also
     * set. 'avformat_new_stream' can be called only if the flag
     * AVFMTCTX_NOHEADER is used and only in the calling thread (not in a
     * background thread).
     * @return 0 on success, < 0 on error.
     *         When returning an error, pkt must not have been allocated
     *         or must be freed before returning
     */
    int (*read_packet)(struct AVFormatContext *, AVPacket *pkt);

    /**
     * Close the stream. The AVFormatContext and AVStreams are not
     * freed by this function
     */
    int (*read_close)(struct AVFormatContext *);

    /**
     * Seek to a given timestamp relative to the frames in
     * stream component stream_index.
     * @param stream_index Must not be -1.
     * @param flags Selects which direction should be preferred if no exact
     *              match is available.
     * @return >= 0 on success (but not necessarily the new offset)
     */
    int (*read_seek)(struct AVFormatContext *,
                     int stream_index, int64_t timestamp, int flags);

    /**
     * Get the next timestamp in stream[stream_index].time_base units.
     * @return the timestamp or AV_NOPTS_VALUE if an error occurred
     */
    int64_t (*read_timestamp)(struct AVFormatContext *s, int stream_index,
                              int64_t *pos, int64_t pos_limit);

    /**
     * Start/resume playing - only meaningful if using a network-based format
     * (RTSP).
     */
    int (*read_play)(struct AVFormatContext *);

    /**
     * Pause playing - only meaningful if using a network-based format
     * (RTSP).
     */
    int (*read_pause)(struct AVFormatContext *);

    /**
     * Seek to timestamp ts.
     * Seeking will be done so that the point from which all active streams
     * can be presented successfully will be closest to ts and within min/max_ts.
     * Active streams are all streams that have AVStream.discard < AVDISCARD_ALL.
     */
    int (*read_seek2)(struct AVFormatContext *s, int stream_index, int64_t min_ts, int64_t ts, int64_t max_ts, int flags);
} AVInputFormat;
/**
 * @}
 */

enum AVStreamParseType {
    AVSTREAM_PARSE_NONE,
    AVSTREAM_PARSE_FULL,       /**< full parsing and repack */
    AVSTREAM_PARSE_HEADERS,    /**< Only parse headers, do not repack. */
    AVSTREAM_PARSE_TIMESTAMPS, /**< full parsing and interpolation of timestamps for frames not starting on a packet boundary */
    AVSTREAM_PARSE_FULL_ONCE,  /**< full parsing and repack of the first frame only, only implemented for H.264 currently */
};

typedef struct AVIndexEntry {
    int64_t pos;
    int64_t timestamp;        /**<
                               * Timestamp in AVStream.time_base units, preferably the time from which on correctly decoded frames are available
                               * when seeking to this entry. That means preferable PTS on keyframe based formats.
                               * But demuxers can choose to store a different timestamp, if it is more convenient for the implementation or nothing better
                               * is known
                               */
#define AVINDEX_KEYFRAME 0x0001
    int flags:2;
    int size:30; //Yeah, trying to keep the size of this small to reduce memory requirements (it is 24 vs. 32 bytes due to possible 8-byte alignment).
    int min_distance;         /**< Minimum distance between this and the previous keyframe, used to avoid unneeded searching. */
} AVIndexEntry;

#define AV_DISPOSITION_DEFAULT   0x0001
#define AV_DISPOSITION_DUB       0x0002
#define AV_DISPOSITION_ORIGINAL  0x0004
#define AV_DISPOSITION_COMMENT   0x0008
#define AV_DISPOSITION_LYRICS    0x0010
#define AV_DISPOSITION_KARAOKE   0x0020

/**
 * Track should be used during playback by default.
 * Useful for subtitle track that should be displayed
 * even when user did not explicitly ask for subtitles.
 */
#define AV_DISPOSITION_FORCED    0x0040
#define AV_DISPOSITION_HEARING_IMPAIRED  0x0080  /**< stream for hearing impaired audiences */
#define AV_DISPOSITION_VISUAL_IMPAIRED   0x0100  /**< stream for visual impaired audiences */
#define AV_DISPOSITION_CLEAN_EFFECTS     0x0200  /**< stream without voice */
/**
 * The stream is stored in the file as an attached picture/"cover art" (e.g.
 * APIC frame in ID3v2). The single packet associated with it will be returned
 * among the first few packets read from the file unless seeking takes place.
 * It can also be accessed at any time in AVStream.attached_pic.
 */
#define AV_DISPOSITION_ATTACHED_PIC      0x0400

/**
 * Stream structure.
 * New fields can be added to the end with minor version bumps.
 * Removal, reordering and changes to existing fields require a major
 * version bump.
 * sizeof(AVStream) must not be used outside libav*.
 */
typedef struct AVStream {
    int index;    /**< stream index in AVFormatContext */
    /**
     * Format-specific stream ID.
     * decoding: set by libavformat
     * encoding: set by the user
     */
    int id;
    /**
     * Codec context associated with this stream. Allocated and freed by
     * libavformat.
     *
     * - decoding: The demuxer exports codec information stored in the headers
     *             here.
     * - encoding: The user sets codec information, the muxer writes it to the
     *             output. Mandatory fields as specified in AVCodecContext
     *             documentation must be set even if this AVCodecContext is
     *             not actually used for encoding.
     */
    AVCodecContext *codec;
    /**
     * Real base framerate of the stream.
     * This is the lowest framerate with which all timestamps can be
     * represented accurately (it is the least common multiple of all
     * framerates in the stream). Note, this value is just a guess!
     * For example, if the time base is 1/90000 and all frames have either
     * approximately 3600 or 1800 timer ticks, then r_frame_rate will be 50/1.
     */
    AVRational r_frame_rate;
    void *priv_data;

    /**
     * encoding: pts generation when outputting stream
     */
    struct AVFrac pts;

    /**
     * This is the fundamental unit of time (in seconds) in terms
     * of which frame timestamps are represented.
     *
     * decoding: set by libavformat
     * encoding: set by libavformat in av_write_header. The muxer may use the
     * user-provided value of @ref AVCodecContext.time_base "codec->time_base"
     * as a hint.
     */
    AVRational time_base;

    /**
     * Decoding: pts of the first frame of the stream in presentation order, in stream time base.
     * Only set this if you are absolutely 100% sure that the value you set
     * it to really is the pts of the first frame.
     * This may be undefined (AV_NOPTS_VALUE).
     * @note The ASF header does NOT contain a correct start_time the ASF
     * demuxer must NOT set this.
     */
    int64_t start_time;

    /**
     * Decoding: duration of the stream, in stream time base.
     * If a source file does not specify a duration, but does specify
     * a bitrate, this value will be estimated from bitrate and file size.
     */
    int64_t duration;

    int64_t nb_frames;                 ///< number of frames in this stream if known or 0

    int disposition; /**< AV_DISPOSITION_* bit field */

    enum AVDiscard discard; ///< Selects which packets can be discarded at will and do not need to be demuxed.

    /**
     * sample aspect ratio (0 if unknown)
     * - encoding: Set by user.
     * - decoding: Set by libavformat.
     */
    AVRational sample_aspect_ratio;

    AVDictionary *metadata;

    /**
     * Average framerate
     */
    AVRational avg_frame_rate;

    /**
     * For streams with AV_DISPOSITION_ATTACHED_PIC disposition, this packet
     * will contain the attached picture.
     *
     * decoding: set by libavformat, must not be modified by the caller.
     * encoding: unused
     */
    AVPacket attached_pic;

    /*****************************************************************
     * All fields below this line are not part of the public API. They
     * may not be used outside of libavformat and can be changed and
     * removed at will.
     * New public fields should be added right above.
     *****************************************************************
     */

    /**
     * Stream information used internally by av_find_stream_info()
     */
#define MAX_STD_TIMEBASES (60*12+5)
    struct {
        int64_t last_dts;
        int64_t duration_gcd;
        int duration_count;
        double duration_error[2][2][MAX_STD_TIMEBASES];
        int64_t codec_info_duration;
        int nb_decoded_frames;
        int found_decoder;
    } *info;

    int pts_wrap_bits; /**< number of bits in pts (used for wrapping control) */

    // Timestamp generation support:
    /**
     * Timestamp corresponding to the last dts sync point.
     *
     * Initialized when AVCodecParserContext.dts_sync_point >= 0 and
     * a DTS is received from the underlying container. Otherwise set to
     * AV_NOPTS_VALUE by default.
     */
    int64_t reference_dts;
    int64_t first_dts;
    int64_t cur_dts;
    int64_t last_IP_pts;
    int last_IP_duration;

    /**
     * Number of packets to buffer for codec probing
     */
#define MAX_PROBE_PACKETS 2500
    int probe_packets;

    /**
     * Number of frames that have been demuxed during av_find_stream_info()
     */
    int codec_info_nb_frames;

    /**
     * Stream Identifier
     * This is the MPEG-TS stream identifier +1
     * 0 means unknown
     */
    int stream_identifier;

    int64_t interleaver_chunk_size;
    int64_t interleaver_chunk_duration;

    /* av_read_frame() support */
    enum AVStreamParseType need_parsing;
    struct AVCodecParserContext *parser;

    /**
     * last packet in packet_buffer for this stream when muxing.
     */
    struct AVPacketList *last_in_packet_buffer;
    AVProbeData probe_data;
#define MAX_REORDER_DELAY 16
    int64_t pts_buffer[MAX_REORDER_DELAY+1];

    AVIndexEntry *index_entries; /**< Only used if the format does not
                                    support seeking natively. */
    int nb_index_entries;
    unsigned int index_entries_allocated_size;

    /**
     * flag to indicate that probing is requested
     * NOT PART OF PUBLIC API
     */
    int request_probe;
    /**
     * Indicates that everything up to the next keyframe
     * should be discarded.
     */
    int skip_to_keyframe;
} AVStream;

#define AV_PROGRAM_RUNNING 1

/**
 * New fields can be added to the end with minor version bumps.
 * Removal, reordering and changes to existing fields require a major
 * version bump.
 * sizeof(AVProgram) must not be used outside libav*.
 */
typedef struct AVProgram {
    int            id;
    int            flags;
    enum AVDiscard discard;        ///< selects which program to discard and which to feed to the caller
    unsigned int   *stream_index;
    unsigned int   nb_stream_indexes;
    AVDictionary *metadata;

    int program_num;
    int pmt_pid;
    int pcr_pid;
} AVProgram;

#define AVFMTCTX_NOHEADER      0x0001 /**< signal that no header is present
                                         (streams are added dynamically) */

typedef struct AVChapter {
    int id;                 ///< unique ID to identify the chapter
    AVRational time_base;   ///< time base in which the start/end timestamps are specified
    int64_t start, end;     ///< chapter start/end time in time_base units
    AVDictionary *metadata;
} AVChapter;

/**
 * Format I/O context.
 * New fields can be added to the end with minor version bumps.
 * Removal, reordering and changes to existing fields require a major
 * version bump.
 * sizeof(AVFormatContext) must not be used outside libav*, use
 * avformat_alloc_context() to create an AVFormatContext.
 */
typedef struct AVFormatContext {
    /**
     * A class for logging and AVOptions. Set by avformat_alloc_context().
     * Exports (de)muxer private options if they exist.
     */
    const AVClass *av_class;

    /**
     * Can only be iformat or oformat, not both at the same time.
     *
     * decoding: set by avformat_open_input().
     * encoding: set by the user.
     */
    struct AVInputFormat *iformat;
    struct AVOutputFormat *oformat;

    /**
     * Format private data. This is an AVOptions-enabled struct
     * if and only if iformat/oformat.priv_class is not NULL.
     */
    void *priv_data;

    /*
     * I/O context.
     *
     * decoding: either set by the user before avformat_open_input() (then
     * the user must close it manually) or set by avformat_open_input().
     * encoding: set by the user.
     *
     * Do NOT set this field if AVFMT_NOFILE flag is set in
     * iformat/oformat.flags. In such a case, the (de)muxer will handle
     * I/O in some other way and this field will be NULL.
     */
    AVIOContext *pb;

    /* stream info */
    int ctx_flags; /**< Format-specific flags, see AVFMTCTX_xx */

    /**
     * A list of all streams in the file. New streams are created with
     * avformat_new_stream().
     *
     * decoding: streams are created by libavformat in avformat_open_input().
     * If AVFMTCTX_NOHEADER is set in ctx_flags, then new streams may also
     * appear in av_read_frame().
     * encoding: streams are created by the user before avformat_write_header().
     */
    unsigned int nb_streams;
    AVStream **streams;

    char filename[1024]; /**< input or output filename */

    /**
     * Decoding: position of the first frame of the component, in
     * AV_TIME_BASE fractional seconds. NEVER set this value directly:
     * It is deduced from the AVStream values.
     */
    int64_t start_time;

    /**
     * Decoding: duration of the stream, in AV_TIME_BASE fractional
     * seconds. Only set this value if you know none of the individual stream
     * durations and also do not set any of them. This is deduced from the
     * AVStream values if not set.
     */
    int64_t duration;

    /**
     * Decoding: total stream bitrate in bit/s, 0 if not
     * available. Never set it directly if the file_size and the
     * duration are known as FFmpeg can compute it automatically.
     */
    int bit_rate;

    unsigned int packet_size;
    int max_delay;

    int flags;
#define AVFMT_FLAG_GENPTS       0x0001 ///< Generate missing pts even if it requires parsing future frames.
#define AVFMT_FLAG_IGNIDX       0x0002 ///< Ignore index.
#define AVFMT_FLAG_NONBLOCK     0x0004 ///< Do not block when reading packets from input.
#define AVFMT_FLAG_IGNDTS       0x0008 ///< Ignore DTS on frames that contain both DTS & PTS
#define AVFMT_FLAG_NOFILLIN     0x0010 ///< Do not infer any values from other values, just return what is stored in the container
#define AVFMT_FLAG_NOPARSE      0x0020 ///< Do not use AVParsers, you also must set AVFMT_FLAG_NOFILLIN as the fillin code works on frames and no parsing -> no frames. Also seeking to frames can not work if parsing to find frame boundaries has been disabled
#define AVFMT_FLAG_CUSTOM_IO    0x0080 ///< The caller has supplied a custom AVIOContext, don't avio_close() it.
#define AVFMT_FLAG_DISCARD_CORRUPT  0x0100 ///< Discard frames marked corrupted
#define AVFMT_FLAG_MP4A_LATM    0x8000 ///< Enable RTP MP4A-LATM payload
#define AVFMT_FLAG_SORT_DTS    0x10000 ///< try to interleave outputted packets by dts (using this flag can slow demuxing down)
#define AVFMT_FLAG_PRIV_OPT    0x20000 ///< Enable use of private options by delaying codec open (this could be made default once all code is converted)
#define AVFMT_FLAG_KEEP_SIDE_DATA 0x40000 ///< Dont merge side data but keep it separate.

    /**
     * decoding: size of data to probe; encoding: unused.
     */
    unsigned int probesize;

    /**
     * decoding: maximum time (in AV_TIME_BASE units) during which the input should
     * be analyzed in avformat_find_stream_info().
     */
    int max_analyze_duration;

    const uint8_t *key;
    int keylen;

    unsigned int nb_programs;
    AVProgram **programs;

    /**
     * Forced video codec_id.
     * Demuxing: Set by user.
     */
    enum CodecID video_codec_id;

    /**
     * Forced audio codec_id.
     * Demuxing: Set by user.
     */
    enum CodecID audio_codec_id;

    /**
     * Forced subtitle codec_id.
     * Demuxing: Set by user.
     */
    enum CodecID subtitle_codec_id;

    /**
     * Maximum amount of memory in bytes to use for the index of each stream.
     * If the index exceeds this size, entries will be discarded as
     * needed to maintain a smaller size. This can lead to slower or less
     * accurate seeking (depends on demuxer).
     * Demuxers for which a full in-memory index is mandatory will ignore
     * this.
     * muxing  : unused
     * demuxing: set by user
     */
    unsigned int max_index_size;

    /**
     * Maximum amount of memory in bytes to use for buffering frames
     * obtained from realtime capture devices.
     */
    unsigned int max_picture_buffer;

    unsigned int nb_chapters;
    AVChapter **chapters;

    AVDictionary *metadata;

    /**
     * Start time of the stream in real world time, in microseconds
     * since the unix epoch (00:00 1st January 1970). That is, pts=0
     * in the stream was captured at this real world time.
     * - encoding: Set by user.
     * - decoding: Unused.
     */
    int64_t start_time_realtime;

    /**
     * decoding: number of frames used to probe fps
     */
    int fps_probe_size;

    /**
     * Error recognition; higher values will detect more errors but may
     * misdetect some more or less valid parts as errors.
     * - encoding: unused
     * - decoding: Set by user.
     */
    int error_recognition;

    /**
     * Custom interrupt callbacks for the I/O layer.
     *
     * decoding: set by the user before avformat_open_input().
     * encoding: set by the user before avformat_write_header()
     * (mainly useful for AVFMT_NOFILE formats). The callback
     * should also be passed to avio_open2() if it's used to
     * open the file.
     */
    AVIOInterruptCB interrupt_callback;

    /**
     * Flags to enable debugging.
     */
    int debug;
#define FF_FDEBUG_TS        0x0001

    /**
     * Transport stream id.
     * This will be moved into demuxer private options. Thus no API/ABI compatibility
     */
    int ts_id;

    /**
     * Audio preload in microseconds.
     * Note, not all formats support this and unpredictable things may happen if it is used when not supported.
     * - encoding: Set by user via AVOptions (NO direct access)
     * - decoding: unused
     */
    int audio_preload;

    /**
     * Max chunk time in microseconds.
     * Note, not all formats support this and unpredictable things may happen if it is used when not supported.
     * - encoding: Set by user via AVOptions (NO direct access)
     * - decoding: unused
     */
    int max_chunk_duration;

    /**
     * Max chunk size in bytes
     * Note, not all formats support this and unpredictable things may happen if it is used when not supported.
     * - encoding: Set by user via AVOptions (NO direct access)
     * - decoding: unused
     */
    int max_chunk_size;

    /*****************************************************************
     * All fields below this line are not part of the public API. They
     * may not be used outside of libavformat and can be changed and
     * removed at will.
     * New public fields should be added right above.
     *****************************************************************
     */

    /**
     * This buffer is only needed when packets were already buffered but
     * not decoded, for example to get the codec parameters in MPEG
     * streams.
     */
    struct AVPacketList *packet_buffer;
    struct AVPacketList *packet_buffer_end;

    /* av_seek_frame() support */
    int64_t data_offset; /**< offset of the first packet */

    /**
     * Raw packets from the demuxer, prior to parsing and decoding.
     * This buffer is used for buffering packets until the codec can
     * be identified, as parsing cannot be done without knowing the
     * codec.
     */
    struct AVPacketList *raw_packet_buffer;
    struct AVPacketList *raw_packet_buffer_end;
    /**
     * Packets split by the parser get queued here.
     */
    struct AVPacketList *parse_queue;
    struct AVPacketList *parse_queue_end;
    /**
     * Remaining size available for raw_packet_buffer, in bytes.
     */
#define RAW_PACKET_BUFFER_SIZE 2500000
    int raw_packet_buffer_remaining_size;

    int avio_flags;
} AVFormatContext;

typedef struct AVPacketList {
    AVPacket pkt;
    struct AVPacketList *next;
} AVPacketList;


/**
 * @defgroup lavf_core Core functions
 * @ingroup libavf
 *
 * Functions for querying libavformat capabilities, allocating core structures,
 * etc.
 * @{
 */

/**
 * Return the LIBAVFORMAT_VERSION_INT constant.
 */
unsigned avformat_version(void);

/**
 * Return the libavformat build-time configuration.
 */
const char *avformat_configuration(void);

/**
 * Return the libavformat license.
 */
const char *avformat_license(void);

/**
 * Initialize libavformat and register all the muxers, demuxers and
 * protocols. If you do not call this function, then you can select
 * exactly which formats you want to support.
 *
 * @see av_register_input_format()
 * @see av_register_output_format()
 * @see av_register_protocol()
 */
void av_register_all(void);

void av_register_input_format(AVInputFormat *format);
void av_register_output_format(AVOutputFormat *format);

/**
 * Do global initialization of network components. This is optional,
 * but recommended, since it avoids the overhead of implicitly
 * doing the setup for each session.
 *
 * Calling this function will become mandatory if using network
 * protocols at some major version bump.
 */
int avformat_network_init(void);

/**
 * Undo the initialization done by avformat_network_init.
 */
int avformat_network_deinit(void);

/**
 * If f is NULL, returns the first registered input format,
 * if f is non-NULL, returns the next registered input format after f
 * or NULL if f is the last one.
 */
AVInputFormat  *av_iformat_next(AVInputFormat  *f);

/**
 * If f is NULL, returns the first registered output format,
 * if f is non-NULL, returns the next registered output format after f
 * or NULL if f is the last one.
 */
AVOutputFormat *av_oformat_next(AVOutputFormat *f);

/**
 * Allocate an AVFormatContext.
 * avformat_free_context() can be used to free the context and everything
 * allocated by the framework within it.
 */
AVFormatContext *avformat_alloc_context(void);

/**
 * Free an AVFormatContext and all its streams.
 * @param s context to free
 */
void avformat_free_context(AVFormatContext *s);

/**
 * Get the AVClass for AVFormatContext. It can be used in combination with
 * AV_OPT_SEARCH_FAKE_OBJ for examining options.
 *
 * @see av_opt_find().
 */
const AVClass *avformat_get_class(void);

/**
 * Add a new stream to a media file.
 *
 * When demuxing, it is called by the demuxer in read_header(). If the
 * flag AVFMTCTX_NOHEADER is set in s.ctx_flags, then it may also
 * be called in read_packet().
 *
 * When muxing, should be called by the user before avformat_write_header().
 *
 * @param c If non-NULL, the AVCodecContext corresponding to the new stream
 * will be initialized to use this codec. This is needed for e.g. codec-specific
 * defaults to be set, so codec should be provided if it is known.
 *
 * @return newly created stream or NULL on error.
 */
AVStream *avformat_new_stream(AVFormatContext *s, AVCodec *c);

AVProgram *av_new_program(AVFormatContext *s, int id);

/**
 * @}
 */


#if FF_API_PKT_DUMP
attribute_deprecated void av_pkt_dump(FILE *f, AVPacket *pkt, int dump_payload);
attribute_deprecated void av_pkt_dump_log(void *avcl, int level, AVPacket *pkt,
                                          int dump_payload);
#endif

#if FF_API_ALLOC_OUTPUT_CONTEXT
/**
 * @deprecated deprecated in favor of avformat_alloc_output_context2()
 */
attribute_deprecated
AVFormatContext *avformat_alloc_output_context(const char *format,
                                               AVOutputFormat *oformat,
                                               const char *filename);
#endif

/**
 * Allocate an AVFormatContext for an output format.
 * avformat_free_context() can be used to free the context and
 * everything allocated by the framework within it.
 *
 * @param *ctx is set to the created format context, or to NULL in
 * case of failure
 * @param oformat format to use for allocating the context, if NULL
 * format_name and filename are used instead
 * @param format_name the name of output format to use for allocating the
 * context, if NULL filename is used instead
 * @param filename the name of the filename to use for allocating the
 * context, may be NULL
 * @return >= 0 in case of success, a negative AVERROR code in case of
 * failure
 */
int avformat_alloc_output_context2(AVFormatContext **ctx, AVOutputFormat *oformat,
                                   const char *format_name, const char *filename);

/**
 * @addtogroup lavf_decoding
 * @{
 */

/**
 * Find AVInputFormat based on the short name of the input format.
 */
AVInputFormat *av_find_input_format(const char *short_name);

/**
 * Guess the file format.
 *
 * @param is_opened Whether the file is already opened; determines whether
 *                  demuxers with or without AVFMT_NOFILE are probed.
 */
AVInputFormat *av_probe_input_format(AVProbeData *pd, int is_opened);

/**
 * Guess the file format.
 *
 * @param is_opened Whether the file is already opened; determines whether
 *                  demuxers with or without AVFMT_NOFILE are probed.
 * @param score_max A probe score larger that this is required to accept a
 *                  detection, the variable is set to the actual detection
 *                  score afterwards.
 *                  If the score is <= AVPROBE_SCORE_MAX / 4 it is recommended
 *                  to retry with a larger probe buffer.
 */
AVInputFormat *av_probe_input_format2(AVProbeData *pd, int is_opened, int *score_max);

/**
 * Guess the file format.
 *
 * @param is_opened Whether the file is already opened; determines whether
 *                  demuxers with or without AVFMT_NOFILE are probed.
 * @param score_ret The score of the best detection.
 */
AVInputFormat *av_probe_input_format3(AVProbeData *pd, int is_opened, int *score_ret);

/**
 * Probe a bytestream to determine the input format. Each time a probe returns
 * with a score that is too low, the probe buffer size is increased and another
 * attempt is made. When the maximum probe size is reached, the input format
 * with the highest score is returned.
 *
 * @param pb the bytestream to probe
 * @param fmt the input format is put here
 * @param filename the filename of the stream
 * @param logctx the log context
 * @param offset the offset within the bytestream to probe from
 * @param max_probe_size the maximum probe buffer size (zero for default)
 * @return 0 in case of success, a negative value corresponding to an
 * AVERROR code otherwise
 */
int av_probe_input_buffer(AVIOContext *pb, AVInputFormat **fmt,
                          const char *filename, void *logctx,
                          unsigned int offset, unsigned int max_probe_size);

/**
 * Open an input stream and read the header. The codecs are not opened.
 * The stream must be closed with av_close_input_file().
 *
 * @param ps Pointer to user-supplied AVFormatContext (allocated by avformat_alloc_context).
 *           May be a pointer to NULL, in which case an AVFormatContext is allocated by this
 *           function and written into ps.
 *           Note that a user-supplied AVFormatContext will be freed on failure.
 * @param filename Name of the stream to open.
 * @param fmt If non-NULL, this parameter forces a specific input format.
 *            Otherwise the format is autodetected.
 * @param options  A dictionary filled with AVFormatContext and demuxer-private options.
 *                 On return this parameter will be destroyed and replaced with a dict containing
 *                 options that were not found. May be NULL.
 *
 * @return 0 on success, a negative AVERROR on failure.
 *
 * @note If you want to use custom IO, preallocate the format context and set its pb field.
 */
int avformat_open_input(AVFormatContext **ps, const char *filename, AVInputFormat *fmt, AVDictionary **options);

attribute_deprecated
int av_demuxer_open(AVFormatContext *ic);

#if FF_API_FORMAT_PARAMETERS
/**
 * Read packets of a media file to get stream information. This
 * is useful for file formats with no headers such as MPEG. This
 * function also computes the real framerate in case of MPEG-2 repeat
 * frame mode.
 * The logical file position is not changed by this function;
 * examined packets may be buffered for later processing.
 *
 * @param ic media file handle
 * @return >=0 if OK, AVERROR_xxx on error
 * @todo Let the user decide somehow what information is needed so that
 *       we do not waste time getting stuff the user does not need.
 *
 * @deprecated use avformat_find_stream_info.
 */
attribute_deprecated
int av_find_stream_info(AVFormatContext *ic);
#endif

/**
 * Read packets of a media file to get stream information. This
 * is useful for file formats with no headers such as MPEG. This
 * function also computes the real framerate in case of MPEG-2 repeat
 * frame mode.
 * The logical file position is not changed by this function;
 * examined packets may be buffered for later processing.
 *
 * @param ic media file handle
 * @param options  If non-NULL, an ic.nb_streams long array of pointers to
 *                 dictionaries, where i-th member contains options for
 *                 codec corresponding to i-th stream.
 *                 On return each dictionary will be filled with options that were not found.
 * @return >=0 if OK, AVERROR_xxx on error
 *
 * @note this function isn't guaranteed to open all the codecs, so
 *       options being non-empty at return is a perfectly normal behavior.
 *
 * @todo Let the user decide somehow what information is needed so that
 *       we do not waste time getting stuff the user does not need.
 */
int avformat_find_stream_info(AVFormatContext *ic, AVDictionary **options);

/**
 * Find the programs which belong to a given stream.
 *
 * @param ic    media file handle
 * @param last  the last found program, the search will start after this
 *              program, or from the beginning if it is NULL
 * @param s     stream index
 * @return the next program which belongs to s, NULL if no program is found or
 *         the last program is not among the programs of ic.
 */
AVProgram *av_find_program_from_stream(AVFormatContext *ic, AVProgram *last, int s);

/**
 * Find the "best" stream in the file.
 * The best stream is determined according to various heuristics as the most
 * likely to be what the user expects.
 * If the decoder parameter is non-NULL, av_find_best_stream will find the
 * default decoder for the stream's codec; streams for which no decoder can
 * be found are ignored.
 *
 * @param ic                media file handle
 * @param type              stream type: video, audio, subtitles, etc.
 * @param wanted_stream_nb  user-requested stream number,
 *                          or -1 for automatic selection
 * @param related_stream    try to find a stream related (eg. in the same
 *                          program) to this one, or -1 if none
 * @param decoder_ret       if non-NULL, returns the decoder for the
 *                          selected stream
 * @param flags             flags; none are currently defined
 * @return  the non-negative stream number in case of success,
 *          AVERROR_STREAM_NOT_FOUND if no stream with the requested type
 *          could be found,
 *          AVERROR_DECODER_NOT_FOUND if streams were found but no decoder
 * @note  If av_find_best_stream returns successfully and decoder_ret is not
 *        NULL, then *decoder_ret is guaranteed to be set to a valid AVCodec.
 */
int av_find_best_stream(AVFormatContext *ic,
                        enum AVMediaType type,
                        int wanted_stream_nb,
                        int related_stream,
                        AVCodec **decoder_ret,
                        int flags);

#if FF_API_READ_PACKET
/**
 * @deprecated use AVFMT_FLAG_NOFILLIN | AVFMT_FLAG_NOPARSE to read raw
 * unprocessed packets
 *
 * Read a transport packet from a media file.
 *
 * This function is obsolete and should never be used.
 * Use av_read_frame() instead.
 *
 * @param s media file handle
 * @param pkt is filled
 * @return 0 if OK, AVERROR_xxx on error
 */
attribute_deprecated
int av_read_packet(AVFormatContext *s, AVPacket *pkt);
#endif

/**
 * Return the next frame of a stream.
 * This function returns what is stored in the file, and does not validate
 * that what is there are valid frames for the decoder. It will split what is
 * stored in the file into frames and return one for each call. It will not
 * omit invalid data between valid frames so as to give the decoder the maximum
 * information possible for decoding.
 *
 * The returned packet is valid
 * until the next av_read_frame() or until av_close_input_file() and
 * must be freed with av_free_packet. For video, the packet contains
 * exactly one frame. For audio, it contains an integer number of
 * frames if each frame has a known fixed size (e.g. PCM or ADPCM
 * data). If the audio frames have a variable size (e.g. MPEG audio),
 * then it contains one frame.
 *
 * pkt->pts, pkt->dts and pkt->duration are always set to correct
 * values in AVStream.time_base units (and guessed if the format cannot
 * provide them). pkt->pts can be AV_NOPTS_VALUE if the video format
 * has B-frames, so it is better to rely on pkt->dts if you do not
 * decompress the payload.
 *
 * @return 0 if OK, < 0 on error or end of file
 */
int av_read_frame(AVFormatContext *s, AVPacket *pkt);

/**
 * Seek to the keyframe at timestamp.
 * 'timestamp' in 'stream_index'.
 * @param stream_index If stream_index is (-1), a default
 * stream is selected, and timestamp is automatically converted
 * from AV_TIME_BASE units to the stream specific time_base.
 * @param timestamp Timestamp in AVStream.time_base units
 *        or, if no stream is specified, in AV_TIME_BASE units.
 * @param flags flags which select direction and seeking mode
 * @return >= 0 on success
 */
int av_seek_frame(AVFormatContext *s, int stream_index, int64_t timestamp,
                  int flags);

/**
 * Seek to timestamp ts.
 * Seeking will be done so that the point from which all active streams
 * can be presented successfully will be closest to ts and within min/max_ts.
 * Active streams are all streams that have AVStream.discard < AVDISCARD_ALL.
 *
 * If flags contain AVSEEK_FLAG_BYTE, then all timestamps are in bytes and
 * are the file position (this may not be supported by all demuxers).
 * If flags contain AVSEEK_FLAG_FRAME, then all timestamps are in frames
 * in the stream with stream_index (this may not be supported by all demuxers).
 * Otherwise all timestamps are in units of the stream selected by stream_index
 * or if stream_index is -1, in AV_TIME_BASE units.
 * If flags contain AVSEEK_FLAG_ANY, then non-keyframes are treated as
 * keyframes (this may not be supported by all demuxers).
 *
 * @param stream_index index of the stream which is used as time base reference
 * @param min_ts smallest acceptable timestamp
 * @param ts target timestamp
 * @param max_ts largest acceptable timestamp
 * @param flags flags
 * @return >=0 on success, error code otherwise
 *
 * @note This is part of the new seek API which is still under construction.
 *       Thus do not use this yet. It may change at any time, do not expect
 *       ABI compatibility yet!
 */
int avformat_seek_file(AVFormatContext *s, int stream_index, int64_t min_ts, int64_t ts, int64_t max_ts, int flags);

/**
 * Start playing a network-based stream (e.g. RTSP stream) at the
 * current position.
 */
int av_read_play(AVFormatContext *s);

/**
 * Pause a network-based stream (e.g. RTSP stream).
 *
 * Use av_read_play() to resume it.
 */
int av_read_pause(AVFormatContext *s);

#if FF_API_CLOSE_INPUT_FILE
/**
 * @deprecated use avformat_close_input()
 * Close a media file (but not its codecs).
 *
 * @param s media file handle
 */
attribute_deprecated
void av_close_input_file(AVFormatContext *s);
#endif

/**
 * Close an opened input AVFormatContext. Free it and all its contents
 * and set *s to NULL.
 */
void avformat_close_input(AVFormatContext **s);
/**
 * @}
 */

#if FF_API_NEW_STREAM
/**
 * Add a new stream to a media file.
 *
 * Can only be called in the read_header() function. If the flag
 * AVFMTCTX_NOHEADER is in the format context, then new streams
 * can be added in read_packet too.
 *
 * @param s media file handle
 * @param id file-format-dependent stream ID
 */
attribute_deprecated
AVStream *av_new_stream(AVFormatContext *s, int id);
#endif

#if FF_API_SET_PTS_INFO
/**
 * @deprecated this function is not supposed to be called outside of lavf
 */
attribute_deprecated
void av_set_pts_info(AVStream *s, int pts_wrap_bits,
                     unsigned int pts_num, unsigned int pts_den);
#endif

#define AVSEEK_FLAG_BACKWARD 1 ///< seek backward
#define AVSEEK_FLAG_BYTE     2 ///< seeking based on position in bytes
#define AVSEEK_FLAG_ANY      4 ///< seek to any frame, even non-keyframes
#define AVSEEK_FLAG_FRAME    8 ///< seeking based on frame number

/**
 * @addtogroup lavf_encoding
 * @{
 */
/**
 * Allocate the stream private data and write the stream header to
 * an output media file.
 *
 * @param s Media file handle, must be allocated with avformat_alloc_context().
 *          Its oformat field must be set to the desired output format;
 *          Its pb field must be set to an already openened AVIOContext.
 * @param options  An AVDictionary filled with AVFormatContext and muxer-private options.
 *                 On return this parameter will be destroyed and replaced with a dict containing
 *                 options that were not found. May be NULL.
 *
 * @return 0 on success, negative AVERROR on failure.
 *
 * @see av_opt_find, av_dict_set, avio_open, av_oformat_next.
 */
int avformat_write_header(AVFormatContext *s, AVDictionary **options);

/**
 * Write a packet to an output media file.
 *
 * The packet shall contain one audio or video frame.
 * The packet must be correctly interleaved according to the container
 * specification, if not then av_interleaved_write_frame must be used.
 *
 * @param s media file handle
 * @param pkt The packet, which contains the stream_index, buf/buf_size,
 *            dts/pts, ...
 *            This can be NULL (at any time, not just at the end), in
 *            order to immediately flush data buffered within the muxer,
 *            for muxers that buffer up data internally before writing it
 *            to the output.
 * @return < 0 on error, = 0 if OK, 1 if flushed and there is no more data to flush
 */
int av_write_frame(AVFormatContext *s, AVPacket *pkt);

/**
 * Write a packet to an output media file ensuring correct interleaving.
 *
 * The packet must contain one audio or video frame.
 * If the packets are already correctly interleaved, the application should
 * call av_write_frame() instead as it is slightly faster. It is also important
 * to keep in mind that completely non-interleaved input will need huge amounts
 * of memory to interleave with this, so it is preferable to interleave at the
 * demuxer level.
 *
 * @param s media file handle
 * @param pkt The packet containing the data to be written. Libavformat takes
 * ownership of the data and will free it when it sees fit using the packet's
 * This can be NULL (at any time, not just at the end), to flush the
 * interleaving queues.
 * @ref AVPacket.destruct "destruct" field. The caller must not access the data
 * after this function returns, as it may already be freed.
 * Packet's @ref AVPacket.stream_index "stream_index" field must be set to the
 * index of the corresponding stream in @ref AVFormatContext.streams
 * "s.streams".
 * It is very strongly recommended that timing information (@ref AVPacket.pts
 * "pts", @ref AVPacket.dts "dts" @ref AVPacket.duration "duration") is set to
 * correct values.
 *
 * @return 0 on success, a negative AVERROR on error.
 */
int av_interleaved_write_frame(AVFormatContext *s, AVPacket *pkt);

#if FF_API_INTERLEAVE_PACKET
/**
 * @deprecated this function was never meant to be called by the user
 * programs.
 */
attribute_deprecated
int av_interleave_packet_per_dts(AVFormatContext *s, AVPacket *out,
                                 AVPacket *pkt, int flush);
#endif

/**
 * Write the stream trailer to an output media file and free the
 * file private data.
 *
 * May only be called after a successful call to av_write_header.
 *
 * @param s media file handle
 * @return 0 if OK, AVERROR_xxx on error
 */
int av_write_trailer(AVFormatContext *s);

/**
 * Return the output format in the list of registered output formats
 * which best matches the provided parameters, or return NULL if
 * there is no match.
 *
 * @param short_name if non-NULL checks if short_name matches with the
 * names of the registered formats
 * @param filename if non-NULL checks if filename terminates with the
 * extensions of the registered formats
 * @param mime_type if non-NULL checks if mime_type matches with the
 * MIME type of the registered formats
 */
AVOutputFormat *av_guess_format(const char *short_name,
                                const char *filename,
                                const char *mime_type);

/**
 * Guess the codec ID based upon muxer and filename.
 */
enum CodecID av_guess_codec(AVOutputFormat *fmt, const char *short_name,
                            const char *filename, const char *mime_type,
                            enum AVMediaType type);

/**
 * Get timing information for the data currently output.
 * The exact meaning of "currently output" depends on the format.
 * It is mostly relevant for devices that have an internal buffer and/or
 * work in real time.
 * @param s          media file handle
 * @param stream     stream in the media file
 * @param dts[out]   DTS of the last packet output for the stream, in stream
 *                   time_base units
 * @param wall[out]  absolute time when that packet whas output,
 *                   in microsecond
 * @return  0 if OK, AVERROR(ENOSYS) if the format does not support it
 * Note: some formats or devices may not allow to measure dts and wall
 * atomically.
 */
int av_get_output_timestamp(struct AVFormatContext *s, int stream,
                            int64_t *dts, int64_t *wall);


/**
 * @}
 */


/**
 * @defgroup lavf_misc Utility functions
 * @ingroup libavf
 * @{
 *
 * Miscelaneous utility functions related to both muxing and demuxing
 * (or neither).
 */

/**
 * Send a nice hexadecimal dump of a buffer to the specified file stream.
 *
 * @param f The file stream pointer where the dump should be sent to.
 * @param buf buffer
 * @param size buffer size
 *
 * @see av_hex_dump_log, av_pkt_dump2, av_pkt_dump_log2
 */
void av_hex_dump(FILE *f, uint8_t *buf, int size);

/**
 * Send a nice hexadecimal dump of a buffer to the log.
 *
 * @param avcl A pointer to an arbitrary struct of which the first field is a
 * pointer to an AVClass struct.
 * @param level The importance level of the message, lower values signifying
 * higher importance.
 * @param buf buffer
 * @param size buffer size
 *
 * @see av_hex_dump, av_pkt_dump2, av_pkt_dump_log2
 */
void av_hex_dump_log(void *avcl, int level, uint8_t *buf, int size);

/**
 * Send a nice dump of a packet to the specified file stream.
 *
 * @param f The file stream pointer where the dump should be sent to.
 * @param pkt packet to dump
 * @param dump_payload True if the payload must be displayed, too.
 * @param st AVStream that the packet belongs to
 */
void av_pkt_dump2(FILE *f, AVPacket *pkt, int dump_payload, AVStream *st);


/**
 * Send a nice dump of a packet to the log.
 *
 * @param avcl A pointer to an arbitrary struct of which the first field is a
 * pointer to an AVClass struct.
 * @param level The importance level of the message, lower values signifying
 * higher importance.
 * @param pkt packet to dump
 * @param dump_payload True if the payload must be displayed, too.
 * @param st AVStream that the packet belongs to
 */
void av_pkt_dump_log2(void *avcl, int level, AVPacket *pkt, int dump_payload,
                      AVStream *st);

/**
 * Get the CodecID for the given codec tag tag.
 * If no codec id is found returns CODEC_ID_NONE.
 *
 * @param tags list of supported codec_id-codec_tag pairs, as stored
 * in AVInputFormat.codec_tag and AVOutputFormat.codec_tag
 */
enum CodecID av_codec_get_id(const struct AVCodecTag * const *tags, unsigned int tag);

/**
 * Get the codec tag for the given codec id id.
 * If no codec tag is found returns 0.
 *
 * @param tags list of supported codec_id-codec_tag pairs, as stored
 * in AVInputFormat.codec_tag and AVOutputFormat.codec_tag
 */
unsigned int av_codec_get_tag(const struct AVCodecTag * const *tags, enum CodecID id);

int av_find_default_stream_index(AVFormatContext *s);

/**
 * Get the index for a specific timestamp.
 * @param flags if AVSEEK_FLAG_BACKWARD then the returned index will correspond
 *                 to the timestamp which is <= the requested one, if backward
 *                 is 0, then it will be >=
 *              if AVSEEK_FLAG_ANY seek to any frame, only keyframes otherwise
 * @return < 0 if no such timestamp could be found
 */
int av_index_search_timestamp(AVStream *st, int64_t timestamp, int flags);

/**
 * Add an index entry into a sorted list. Update the entry if the list
 * already contains it.
 *
 * @param timestamp timestamp in the time base of the given stream
 */
int av_add_index_entry(AVStream *st, int64_t pos, int64_t timestamp,
                       int size, int distance, int flags);


/**
 * Split a URL string into components.
 *
 * The pointers to buffers for storing individual components may be null,
 * in order to ignore that component. Buffers for components not found are
 * set to empty strings. If the port is not found, it is set to a negative
 * value.
 *
 * @param proto the buffer for the protocol
 * @param proto_size the size of the proto buffer
 * @param authorization the buffer for the authorization
 * @param authorization_size the size of the authorization buffer
 * @param hostname the buffer for the host name
 * @param hostname_size the size of the hostname buffer
 * @param port_ptr a pointer to store the port number in
 * @param path the buffer for the path
 * @param path_size the size of the path buffer
 * @param url the URL to split
 */
void av_url_split(char *proto,         int proto_size,
                  char *authorization, int authorization_size,
                  char *hostname,      int hostname_size,
                  int *port_ptr,
                  char *path,          int path_size,
                  const char *url);


void av_dump_format(AVFormatContext *ic,
                    int index,
                    const char *url,
                    int is_output);

/**
 * Get the current time in microseconds.
 */
int64_t av_gettime(void);

/**
 * Return in 'buf' the path with '%d' replaced by a number.
 *
 * Also handles the '%0nd' format where 'n' is the total number
 * of digits and '%%'.
 *
 * @param buf destination buffer
 * @param buf_size destination buffer size
 * @param path numbered sequence string
 * @param number frame number
 * @return 0 if OK, -1 on format error
 */
int av_get_frame_filename(char *buf, int buf_size,
                          const char *path, int number);

/**
 * Check whether filename actually is a numbered sequence generator.
 *
 * @param filename possible numbered sequence string
 * @return 1 if a valid numbered sequence string, 0 otherwise
 */
int av_filename_number_test(const char *filename);

/**
 * Generate an SDP for an RTP session.
 *
 * @param ac array of AVFormatContexts describing the RTP streams. If the
 *           array is composed by only one context, such context can contain
 *           multiple AVStreams (one AVStream per RTP stream). Otherwise,
 *           all the contexts in the array (an AVCodecContext per RTP stream)
 *           must contain only one AVStream.
 * @param n_files number of AVCodecContexts contained in ac
 * @param buf buffer where the SDP will be stored (must be allocated by
 *            the caller)
 * @param size the size of the buffer
 * @return 0 if OK, AVERROR_xxx on error
 */
int av_sdp_create(AVFormatContext *ac[], int n_files, char *buf, int size);

/**
 * Return a positive value if the given filename has one of the given
 * extensions, 0 otherwise.
 *
 * @param extensions a comma-separated list of filename extensions
 */
int av_match_ext(const char *filename, const char *extensions);

/**
 * Test if the given container can store a codec.
 *
 * @param std_compliance standards compliance level, one of FF_COMPLIANCE_*
 *
 * @return 1 if codec with ID codec_id can be stored in ofmt, 0 if it cannot.
 *         A negative number if this information is not available.
 */
int avformat_query_codec(AVOutputFormat *ofmt, enum CodecID codec_id, int std_compliance);

/**
 * @defgroup riff_fourcc RIFF FourCCs
 * @{
 * Get the tables mapping RIFF FourCCs to libavcodec CodecIDs. The tables are
 * meant to be passed to av_codec_get_id()/av_codec_get_tag() as in the
 * following code:
 * @code
 * uint32_t tag = MKTAG('H', '2', '6', '4');
 * const struct AVCodecTag *table[] = { avformat_get_riff_video_tags(), 0 };
 * enum CodecID id = av_codec_get_id(table, tag);
 * @endcode
 */
/**
 * @return the table mapping RIFF FourCCs for video to libavcodec CodecID.
 */
const struct AVCodecTag *avformat_get_riff_video_tags(void);
/**
 * @return the table mapping RIFF FourCCs for audio to CodecID.
 */
const struct AVCodecTag *avformat_get_riff_audio_tags(void);
/**
 * @}
 */

/**
 * @}
 */

#endif /* AVFORMAT_AVFORMAT_H */