Rename ffplay to avplay.

10 files changed, 30 insertions, 30 deletions

diff --git a/doc/ffplay.texi b/doc/avplay.texi
index d60852603a..0c74c59a3d 100644
--- a/doc/ffplay.texi
+++ b/doc/avplay.texi
@@ -1,8 +1,8 @@
 \input texinfo @c -*- texinfo -*-
 
-@settitle ffplay Documentation
+@settitle avplay Documentation
 @titlepage
-@center @titlefont{ffplay Documentation}
+@center @titlefont{avplay Documentation}
 @end titlepage
 
 @top
@@ -13,14 +13,14 @@
 
 @example
 @c man begin SYNOPSIS
-ffplay [options] @file{input_file}
+avplay [options] @file{input_file}
 @c man end
 @end example
 
 @chapter Description
 @c man begin DESCRIPTION
 
-FFplay is a very simple and portable media player using the Libav
+AVplay is a very simple and portable media player using the Libav
 libraries and the SDL library. It is mostly used as a testbed for the
 various Libav APIs.
 @c man end
@@ -166,8 +166,8 @@ Seek to percentage in file corresponding to fraction of width.
 
 @ignore
 
-@setfilename ffplay
-@settitle FFplay media player
+@setfilename avplay
+@settitle AVplay media player
 
 @c man begin SEEALSO
 ffmpeg(1), ffprobe(1), ffserver(1) and the Libav HTML documentation
diff --git a/doc/demuxers.texi b/doc/demuxers.texi
index 98f9fdeff8..fc03459417 100644
--- a/doc/demuxers.texi
+++ b/doc/demuxers.texi
@@ -70,7 +70,7 @@ Apple HTTP Live Streaming demuxer.
 
 This demuxer presents all AVStreams from all variant streams.
 The id field is set to the bitrate variant index number. By setting
-the discard flags on AVStreams (by pressing 'a' or 'v' in ffplay),
+the discard flags on AVStreams (by pressing 'a' or 'v' in avplay),
 the caller can decide which variant streams to actually receive.
 The total bitrate of the variant that the stream belongs to is
 available in a metadata key named "variant_bitrate".
diff --git a/doc/developer.texi b/doc/developer.texi
index 208c119753..d75471cb29 100644
--- a/doc/developer.texi
+++ b/doc/developer.texi
@@ -17,7 +17,7 @@
 decoding). Look at @file{libavcodec/apiexample.c} to see how to use it.
 
 @item libavformat is the library containing the file format handling (mux and
-demux code for several formats). Look at @file{ffplay.c} to use it in a
+demux code for several formats). Look at @file{avplay.c} to use it in a
 player. See @file{libavformat/output-example.c} to use it to generate
 audio or video streams.
 
diff --git a/doc/ffmpeg.texi b/doc/ffmpeg.texi
index ca801d31e4..6393516c6d 100644
--- a/doc/ffmpeg.texi
+++ b/doc/ffmpeg.texi
@@ -1079,7 +1079,7 @@ file to which you want to add them.
 @settitle ffmpeg video converter
 
 @c man begin SEEALSO
-ffplay(1), ffprobe(1), ffserver(1) and the Libav HTML documentation
+avplay(1), ffprobe(1), ffserver(1) and the Libav HTML documentation
 @c man end
 
 @c man begin AUTHORS
diff --git a/doc/ffprobe.texi b/doc/ffprobe.texi
index 5e856e6645..079cf659d7 100644
--- a/doc/ffprobe.texi
+++ b/doc/ffprobe.texi
@@ -122,7 +122,7 @@ with name "STREAM".
 @settitle ffprobe media prober
 
 @c man begin SEEALSO
-ffmpeg(1), ffplay(1), ffserver(1) and the Libav HTML documentation
+ffmpeg(1), avplay(1), ffserver(1) and the Libav HTML documentation
 @c man end
 
 @c man begin AUTHORS
diff --git a/doc/ffserver.texi b/doc/ffserver.texi
index d247016bbc..3d64b79377 100644
--- a/doc/ffserver.texi
+++ b/doc/ffserver.texi
@@ -265,7 +265,7 @@ rather than as a daemon.
 
 @c man begin SEEALSO
 
-ffmpeg(1), ffplay(1), ffprobe(1), the @file{ffmpeg/doc/ffserver.conf}
+ffmpeg(1), avplay(1), ffprobe(1), the @file{ffmpeg/doc/ffserver.conf}
 example and the Libav HTML documentation
 @c man end
 
diff --git a/doc/general.texi b/doc/general.texi
index c9919390d6..98065093b5 100644
--- a/doc/general.texi
+++ b/doc/general.texi
@@ -837,7 +837,7 @@ speed up is close to non-existent for normal one-off builds and is only
 noticeable when running make for a second time (for example in
 @code{make install}).
 
-@item In order to compile FFplay, you must have the MinGW development library
+@item In order to compile AVplay, you must have the MinGW development library
 of @uref{http://www.libsdl.org/, SDL}.
 Edit the @file{bin/sdl-config} script so that it points to the correct prefix
 where SDL was installed. Verify that @file{sdl-config} can be launched from
diff --git a/doc/indevs.texi b/doc/indevs.texi
index fa21c099d5..e1c058b8a6 100644
--- a/doc/indevs.texi
+++ b/doc/indevs.texi
@@ -199,10 +199,10 @@ tools.
 @example
 # Grab and show the input of a video4linux device, frame rate is set
 # to the default of 25/1.
-ffplay -s 320x240 -f video4linux /dev/video0
+avplay -s 320x240 -f video4linux /dev/video0
 
 # Grab and show the input of a video4linux2 device, autoadjust size.
-ffplay -f video4linux2 /dev/video0
+avplay -f video4linux2 /dev/video0
 
 # Grab and record the input of a video4linux2 device, autoadjust size,
 # frame rate value defaults to 0/0 so it is read from the video4linux2
diff --git a/doc/libavfilter.texi b/doc/libavfilter.texi
index 1c1220541c..172b7fc4d0 100644
--- a/doc/libavfilter.texi
+++ b/doc/libavfilter.texi
@@ -24,7 +24,7 @@ some directory of your choice by:
 @end example
 
 And then read the README file in the top directory to learn how to
-integrate it into ffmpeg and ffplay.
+integrate it into ffmpeg and avplay.
 
 But note that there may still be serious bugs in the code and its API
 and ABI should not be considered stable yet!
@@ -56,7 +56,7 @@ result will be that in output the top half of the video is mirrored
 onto the bottom half.
 
 Video filters are loaded using the @var{-vf} option passed to
-ffmpeg or to ffplay. Filters in the same linear chain are separated by
+ffmpeg or to avplay. Filters in the same linear chain are separated by
 commas. In our example, @var{split, fifo, overlay} are in one linear
 chain, and @var{fifo, crop, vflip} are in another. The points where
 the linear chains join are labeled by names enclosed in square
diff --git a/doc/protocols.texi b/doc/protocols.texi
index 59906312fa..cc35982e77 100644
--- a/doc/protocols.texi
+++ b/doc/protocols.texi
@@ -52,10 +52,10 @@ resource to be concatenated, each one possibly specifying a distinct
 protocol.
 
 For example to read a sequence of files @file{split1.mpeg},
-@file{split2.mpeg}, @file{split3.mpeg} with @file{ffplay} use the
+@file{split2.mpeg}, @file{split3.mpeg} with @file{avplay} use the
 command:
 @example
-ffplay concat:split1.mpeg\|split2.mpeg\|split3.mpeg
+avplay concat:split1.mpeg\|split2.mpeg\|split3.mpeg
 @end example
 
 Note that you may need to escape the character "|" which is special for
@@ -183,10 +183,10 @@ application specified in @var{app}, may be prefixed by "mp4:".
 
 @end table
 
-For example to read with @file{ffplay} a multimedia resource named
+For example to read with @file{avplay} a multimedia resource named
 "sample" from the application "vod" from an RTMP server "myserver":
 @example
-ffplay rtmp://myserver/vod/sample
+avplay rtmp://myserver/vod/sample
 @end example
 
 @section rtmp, rtmpe, rtmps, rtmpt, rtmpte
@@ -224,9 +224,9 @@ For example, to stream a file in real-time to an RTMP server using
 ffmpeg -re -i myfile -f flv rtmp://myserver/live/mystream
 @end example
 
-To play the same stream using @file{ffplay}:
+To play the same stream using @file{avplay}:
 @example
-ffplay "rtmp://myserver/live/mystream live=1"
+avplay "rtmp://myserver/live/mystream live=1"
 @end example
 
 @section rtp
@@ -281,7 +281,7 @@ When receiving data over UDP, the demuxer tries to reorder received packets
 order for this to be enabled, a maximum delay must be specified in the
 @code{max_delay} field of AVFormatContext.
 
-When watching multi-bitrate Real-RTSP streams with @file{ffplay}, the
+When watching multi-bitrate Real-RTSP streams with @file{avplay}, the
 streams to display can be chosen with @code{-vst} @var{n} and
 @code{-ast} @var{n} for video and audio respectively, and can be switched
 on the fly by pressing @code{v} and @code{a}.
@@ -291,13 +291,13 @@ Example command lines:
 To watch a stream over UDP, with a max reordering delay of 0.5 seconds:
 
 @example
-ffplay -max_delay 500000 rtsp://server/video.mp4?udp
+avplay -max_delay 500000 rtsp://server/video.mp4?udp
 @end example
 
 To watch a stream tunneled over HTTP:
 
 @example
-ffplay rtsp://server/video.mp4?http
+avplay rtsp://server/video.mp4?http
 @end example
 
 To send a stream in realtime to a RTSP server, for others to watch:
@@ -358,13 +358,13 @@ To broadcast a stream on the local subnet, for watching in VLC:
 ffmpeg -re -i @var{input} -f sap sap://224.0.0.255?same_port=1
 @end example
 
-Similarly, for watching in ffplay:
+Similarly, for watching in avplay:
 
 @example
 ffmpeg -re -i @var{input} -f sap sap://224.0.0.255
 @end example
 
-And for watching in ffplay, over IPv6:
+And for watching in avplay, over IPv6:
 
 @example
 ffmpeg -re -i @var{input} -f sap sap://[ff0e::1:2:3:4]
@@ -389,13 +389,13 @@ Example command lines follow.
 To play back the first stream announced on the normal SAP multicast address:
 
 @example
-ffplay sap://
+avplay sap://
 @end example
 
 To play back the first stream announced on one the default IPv6 SAP multicast address:
 
 @example
-ffplay sap://[ff0e::2:7ffe]
+avplay sap://[ff0e::2:7ffe]
 @end example
 
 @section tcp
@@ -414,7 +414,7 @@ Listen for an incoming connection
 
 @example
 ffmpeg -i @var{input} -f @var{format} tcp://@var{hostname}:@var{port}?listen
-ffplay tcp://@var{hostname}:@var{port}
+avplay tcp://@var{hostname}:@var{port}
 @end example
 
 @end table